Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
The Molex 22-55-2283 is a dual polarized board connector with 28 contacts, 0.1" pitch, and GLASS FILLED POLYESTER insulator. It operates b/w -40 to 120°C, suitable for commercial applications requiring reliable rectangular male or female contacts in cable mounting setups.
Median Price
$3.180
Lifecycle Status
Suppliers In-Stock
16
In-Stock Inventory
1k+
Verical
1+ parts
$2.040
100+ parts
-
1k+ parts
$1.830
10k+ parts
$1.740
Mouser Electronics
$3.680
$2.660
$2.260
$2.120
RS Americas
$3.810
$2.740
$2.130
DigiKey
$3.890
$2.722
$2.255
Master Electronics
$3.570
$2.960
$2.930
Chip1Stop
$1.130
$0.954
Newark
$2.790
$2.180
Powell Electronics
$2.050
$1.840
$1.530
Rapid Electronics
$1.573
Digiode
$1.824
Nova Conductors
$1.920
TestEquity
$2.170
IBS Electronics
$2.286
$2.048
$1.655
Vyrian
VNN
TME
$1.240
Semicontronic
$0.960
$0.936
$0.931
Corphita
$1.728
Continental Prestige Electronics
$1.882
Argo Parts USA
Netroflash
Modulus Dynamics
$2.116
Allen Electronics Distributors
$3.850
$2.730
Andel Nordic
$55.830
$39.081
Assy Fe
Perfect Parts
Eastek
The close contact pitch allows for a high density of connections, making this product suitable for applications requiring multiple connections in a compact space.
The longer body length provides ample space for the contacts, ensuring secure connections and reducing the risk of signal interference.
The slim body width helps in saving space on the circuit board or in the application, making it ideal for designs with tight constraints.
The moderate body depth allows for secure mounting while still being compact enough for various applications.
The high-quality insulator material offers good electrical insulation properties and durability, ensuring reliable performance in various environments.
Having two rows loaded allows for increased connectivity options, making this connector versatile for different circuit designs.
The high maximum operating temperature ensures the connector can withstand elevated temperatures and maintain performance in demanding conditions.
The low minimum operating temperature ensures the connector remains functional even in cold environments, providing reliable performance in a wide range of temperatures.
The board connector type is commonly used in various electronic devices and provides a secure connection between the circuit board and external components.
The UL 94V-0 flammability rating indicates that the connector is self-extinguishing and can withstand fire, enhancing safety in electronic applications.
The dual polarization key ensures proper alignment during connection, reducing the risk of incorrect mating and improving overall reliability.
The black insulator color provides a sleek and professional appearance while also helping in identifying the connector in a setup with multiple components.
Compliance with UL and CSA standards ensures that the connector meets industry regulations and quality benchmarks for reliable performance.
The high number of contacts allows for multiple connections, making this connector suitable for complex electronic systems and applications.
The close row spacing facilitates easy mating and ensures a secure connection between the contacts, enhancing overall performance.
The cable mounting type provides flexibility in installation and maintenance, allowing for easy connection to external devices using cables.
The crimp termination type offers a reliable and efficient method for connecting wires to the connector, ensuring secure and stable connections.
The option to choose between male and female contacts allows for flexibility in designing circuits and accommodating diverse connectivity requirements.
The rectangular contact pattern provides a standard and widely used design, ensuring compatibility with various connectors and devices in the market.
The commercial-grade reliability ensures consistent performance and durability, making this connector a dependable choice for a wide range of industrial applications.
Headers & Edge Type Connectors 22-55-2283 attributes and parameters. Explore more Headers & Edge Type Connectors devices from Molex
Additional Features:
Body Width:
Body Depth:
Body Length:
Connector Type:
Mating Contact Finish:
Contact Gender:
Contact Material:
Contact Pattern:
DIN Conformance:
Filter Feature:
IEC Conformity:
Insulator Color:
Insulator Material:
MIL Conformity:
Manufacturer Series:
Mating Contact Pitch (inch):
Mating Contact Row Spacing (inch):
Mating Info.:
Mixed Contacts:
Mounting Type:
No. of Rows Loaded:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
Polarization Key:
Reference Standard:
Reliability:
Sub-Category:
Termination Type:
Total No. of Contacts:
UL Flammability Code:
22-55-2283 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.40
SB
PCN Assembly/Origin - Mult Devs Cancel Location Change 11/Jul/2022
PCN Packaging - Mult Devs Packaging 03/Feb/2022
PCN Other - Various Series Supplier Change 23/Jul/2014
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
1N4148
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Surface Mount: NO; Config: SINGLE; Peak Reflow Temperature (C): 260; No. of Phases: 1; Diode Element Material: SILICON;
SMBJ18CA
Vishay Intertechnology
Vishay Intertechnology's SMBJ18CA is a bidirectional TRANS VOLTAGE SUPPRESSOR DIODE with a max clamping voltage of 29.2 V and a breakdown voltage of 21.05 V. It is surface mountable and commonly used in transient suppression applications.
NDT2955
National Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 3 W; JESD-609 Code: e0; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
2N7002
Secos
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .3 W; Maximum Drain Current (ID): .115 A; Maximum Drain-Source On Resistance: 7.5 ohm;
Diodes Incorporated
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
EU2B-YS3103F
Idec
ROTARY SWITCH;
MMBT3904-7-F
Diodes Inc. MMBT3904-7-F is a NPN BJT transistor for switching applications. Features include VCEsat of 0.3V, hFE of 30, and IC of 0.2A. With a max operating temp of 150°C, it's ideal for small outline SMT designs in automotive electronics.
2N2222A
Rectron
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Package Shape: ROUND;
OPA2227UA
Burr-Brown Corporation
OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
EPCS4SI8N
Intel
EPCS4SI8N by Intel is a small outline flash memory with 512Kx8 organization, operating at 3.3V. It features a max clock frequency of 40MHz and endurance of 100k write/erase cycles. Ideal for industrial applications requiring configuration memory with serial interface and low standby current consumption.
BAV99
Siemens
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LM107H/883C
LM107H/883C by National Semiconductor is a MILITARY-grade Operational Amplifier with +-5/+-15V supplies. Featuring 2000uV max input offset voltage, it operates from -55 to 125 °C. Ideal for applications requiring VOLTAGE-FEEDBACK architecture and frequency compensation.
Gulf Semiconductor
LL4148-GS08
The Vishay Intertechnology LL4148-GS08 is a glass diode with fast recovery time of 0.008 us and max reverse current of 5 uA. Ideal for applications requiring rectification, it has a breakdown voltage of 100 V and can handle a peak forward current of 2 A.
Allegro MicroSystems
RECTIFIER DIODE; Terminal Position: END; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LM317BD2TG
Onsemi
LM317BD2TG by Onsemi is an adjustable positive single output standard regulator with a max output current of 1.5A and a max load regulation of 5.8%. Operating temperature ranges from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact designs.
C1005X7R1E103K050BB
TDK
The TDK C1005X7R1E103K050BB is a ceramic capacitor with capacitance of 0.01uF and rated DC voltage of 25V. It features X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications requiring compact size and stable performance in various electronic circuits.
08055C104KAT2A
KYOCERA AVX
08055C104KAT2A by KYOCERA AVX is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic circuits.
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .83 W; No. of Elements: 1; Transistor Application: SWITCHING;
BSS138
Infineon Technologies
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Maximum Drain Current (Abs) (ID): .2 A; Maximum Feedback Capacitance (Crss): 8 pF;
SQT-120-01-F-D
Samtec
SQT-120-01-F-D by Samtec is a 40-contact board connector with a contact pitch of 0.079". It features a matte tin finish, liquid crystal polymer insulator, and gold flash over nickel mating contacts. Ideal for applications requiring high durability and reliability in commercial settings.
B2B-ZR-SM4-TF(LF)(SN)
J S T Mfg
B2B-ZR-SM4-TF(LF)(SN) by J S T Mfg is a BOARD CONNECTOR with 2 contacts, BRASS material, and Tin (Sn) finish. It has a terminal pitch of 1.5mm and UL Flammability Code of 94V-0. Ideal for surface mount applications in headers & edge type connectors.
2-2013289-1
TE Connectivity
TE Connectivity 2-2013289-1 is a card edge connector with 204 contacts, gold finish, and polyethylene insulator. It has a mating contact pitch of 0.024", operates b/w -55 to 85°C, and rated for 0.5A signal current. Ideal for board mounting applications requiring durable connectors with right-angle mounting style.
MTSW-102-07-G-S-240
Samtec's MTSW-102-07-G-S-240 is a board stacking connector with 0.1" pitch, gold-plated contacts, and glass-filled polyester insulator. Ideal for commercial applications, it features 2.54mm terminal pitch, solder termination, and male contact gender for reliable PCB connections.
87437-0373
Molex
The Molex 87437-0373 is a board connector with 0.059" mating contact pitch, 1000000000 ohm insulation resistance, and 700VAC dielectric voltage. Ideal for commercial applications, it features a polarized housing, surface mount termination, and can handle temperatures from -55 to 105 °C.
51700
AMPHENOL ICC
Amphenol Icc's 51700 board connector features mixed contacts, UL 94V-0 flammability rating, and 2.54mm terminal pitch. Ideal for applications requiring male contact gender, press fit or solder termination, and straight mounting style.
S3B-XH-A-GU
S3B-XH-A-GU by J S T Mfg is a 3-contact board connector with brass contacts and tin finish. It features a terminal pitch of 2.5mm, suitable for right angle mounting applications. This UL 94V-0 rated connector is ideal for various electronic devices requiring secure soldered connections.
103
Keystone Electronics
103 by Keystone Electronics is a PCB connector with 2 contacts, made of POLYBUTYLENE TEREPHTHALATE. It has a body length of 1.13" and depth of 0.335", with terminal pitch of 20.49mm. Ideal for straight mounting on boards, it features male contact gender and leaf-style contacts in a rectangular pattern.
3-640440-2
TE Connectivity 3-640440-2 is a board connector with 0.1" pitch, suitable for stranded cables. It features POLYAMIDE insulation, COPPER ALLOY contacts, and 5A signal current rating. Ideal for commercial applications requiring durable connectors with locking mounting options.
ESHF-105-01-L-D-SM-LC
ESHF-105-01-L-D-SM-LC by Samtec is a 2-row board connector with 10 contacts, featuring a mating contact pitch of 0.05", matte tin termination finish, and liquid crystal polymer insulator. It has a temperature range of -55 to 125°C and is ideal for commercial applications requiring a polarized housing and surface mount termination on rectangular PCB patterns.
DF40HC(3.0)-100DS-0.4V(58)
Hirose Electric
DF40HC(3.0)-100DS-0.4V(58) by Hirose Electric is a 2-row stacking connector with 100 contacts, 0.016" pitch, and 100VAC voltage rating. Ideal for board mounting applications in commercial settings due to its durability of 30 cycles and phosphor bronze contact material.
22-27-2051
The Molex 22-27-2051 is a board connector with 5 contacts, featuring a mating pitch of 0.1", insulation resistance of 1Gohm, and rated current of 4A. It is used in applications requiring a durable, polarized housing with solder termination and UL94V-0 flammability rating.
52610-3072
The Molex 52610-3072 FFC/FPC connector features a mating contact pitch of 0.039", insulation resistance of 100M ohm, and dielectric voltage rating of 700VAC. Ideal for board mounting applications, this female connector has a total of 30 contacts, staggered PCB pattern, and surface mount termination type.
2309413-1
TE Connectivity 2309413-1 is a CARD EDGE CONNECTOR with 260 contacts, POLYETHYLENE insulator, and 0.5A signal current rating. It has a mating contact pitch of 0.02", body dimensions of 2.874" x 0.362" x 1.017". Ideal for board mounting applications in electronics with operating temperatures from -55 to 85°C.
22-05-3021
Molex 22-05-3021 is a board connector with 2 contacts, featuring a mating contact pitch of 0.1" and body dimensions of 0.2"x0.25"x0.442". It uses matte tin/copper termination finish, brass contacts, and polyamide insulator material. Ideal for commercial applications requiring a reliable right-angle mounting style with solder termination.
7-215079-6
Tyco Electronics Amp
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Connectors: ONE; Board Mounting Option: SOLDERABLE RETENTION CLIPS; Insulator Color: RED;
801-43-038-10-003000
Mill-max Mfg
801-43-038-10-003000 by Mill-max Mfg is a BOARD CONNECTOR with GOLD OVER NICKEL finish. Featuring 38 contacts on a 2.54mm pitch, it's ideal for applications requiring FEMALE SOCKET connectors in a STRAIGHT mounting style on PCBs with UL94V-0 flammability rating.
560020-0220
The Molex 560020-0220 is a board connector with 2 contacts, 0.079" pitch, and 3A signal current rating. It features a polyamide insulator, TIN contact finish, and operates b/w -40°C to 105°C. Ideal for commercial applications requiring durable connectors with surface mount termination.
47309-2651
Molex 47309-2651 is a PCB connector with 0.043" pitch, GOLD finish, and 100000000 ohm insulation resistance. Ideal for commercial applications, it has a durability of 10000 cycles and operates b/w -40 to 85 °C.
26-60-4040
Molex 26-60-4040 is a board connector with 4 contacts, 0.156" pitch, and 1500VAC dielectric voltage. Ideal for commercial applications, it features polyester insulation, brass contacts, and -40 to 105°C operating temperature range.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
22-55-2201
The Molex 22-55-2201 is a board connector with 20 contacts, 0.1" pitch, and 0.999" body length. It is used in commercial applications with -40 to 120°C operating temperature range for cable mounting via crimp termination.
22-55-2101
The Molex 22-55-2101 is a 2-row board connector with 0.1" pitch, suitable for commercial applications. Featuring glass-filled polyester insulator, it has 10 contacts and operates b/w -40 to 120°C. With crimp termination and female SQ pin-skt contact style, it is UL and CSA compliant for reliable performance in various electronic devices.
22-55-2081
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Mating Contact Row Spacing (inch): 0.1; Mixed Contacts: NO;
22-55-2102
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body Width: .319 inch; UL Flammability Code: 94V-0; Termination Contact Finish: NOT APPLICABLE;
22-55-2061
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Termination Type: CRIMP; No. of Rows Loaded: 2;
22-55-2241
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Manufacturer Series: 70450; Contact Material: NOT SPECIFIED;
22-55-2322
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Minimum Operating Temperature: -40 Cel; Total No. of Contacts: 32;
22-55-2103
The Molex 22-55-2103 is a dual-polarized board connector with 10 contacts, 0.1" pitch, and GLASS FILLED POLYESTER insulator. It operates b/w -40°C to 120°C, suitable for commercial applications requiring reliable cable mounting with crimp termination. Compliant with UL and CSA standards, it's ideal for electronics needing a compact rectangular connector solution.
22-55-2163
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE OR FEMALE; Mating Contact Row Spacing (inch): 0.1; Mating Contact Pitch (inch): 0.1;
22-55-2403
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE OR FEMALE; Body Width: .199 inch; Polarization Key: DUAL POLARIZED;
22-55-2303
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE OR FEMALE; Mating Contact Row Spacing (inch): 0.1; Total No. of Contacts: 30;
22-55-2343
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE OR FEMALE; IEC Conformity: NO; MIL Conformity: NO;
22-55-2502
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Insulator Color: BLACK; Mating Contact Row Spacing (inch): 0.1;
22-55-2321
The Molex 22-55-2321 is a 32-contact board connector with a mating contact pitch of 0.1". It features glass-filled polyester insulator, operates b/w -40 to 120°C, and has UL94V-0 flammability rating. Ideal for commercial applications requiring reliable female crimp contacts in a rectangular pattern.
22-55-2122
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Insulator Material: GLASS FILLED POLYESTER; Contact Material: NOT SPECIFIED;
22-55-2282
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Mounting Type: CABLE; Polarization Key: CENTER;
22-55-2221
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; MIL Conformity: NO; Reference Standard: UL, CSA;
22-55-2281
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Manufacturer Series: 70450; IEC Conformity: NO;
22-55-2202
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 2200VAC; No. of Connectors: ONE;
22-55-2222
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; UL Flammability Code: 94V-0; Body Width: .319 inch;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved