Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Molex 22-55-2282 is a 28-contact, 2-row board connector with 0.1" pitch. Featuring glass-filled polyester insulator, it operates b/w -40°C to 120°C. Ideal for commercial applications, it has a black insulator and UL94V-0 flammability rating.
Median Price
$2.050
Lifecycle Status
Suppliers In-Stock
19
In-Stock Inventory
1k+
Verical
1+ parts
$2.040
100+ parts
-
1k+ parts
$1.830
10k+ parts
$1.470
Interstate Connecting
$2.298
Mouser Electronics
$3.480
$2.450
$2.060
$1.810
DigiKey
$3.890
$2.722
$2.255
Newark
$1.990
$1.860
Master Electronics
$1.840
$1.490
Farnell
$1.730
$1.700
Powell Electronics
$1.530
Chip1Stop
$1.250
Heilind Electronics
NEP Electronics
Vyrian
Digiode
$1.938
TestEquity
$2.170
Rapid Electronics
$2.409
IBS Electronics
$2.286
$2.048
$1.655
TME
$1.480
$1.190
$0.970
VNN
Nova Conductors
Andel Nordic
$0.134
$0.129
Semicontronic
$1.060
$1.034
$1.028
Corphita
$1.836
Assy Fe
Argo Parts USA
Netroflash
Continental Prestige Electronics
The tight mating contact pitch of 0.1 inch ensures precise and secure connections, making this product ideal for applications requiring high reliability.
The longer body length allows for easy handling and installation of the connector, ensuring convenience during assembly.
The slim body width of 0.319 inch saves space and allows for high-density PCB layouts, making this product suitable for compact electronic devices.
The moderate body depth of 0.6 inch provides stability and durability to the connector, ensuring long-term performance and reliability.
The use of glass-filled polyester as the insulator material offers excellent electrical and mechanical properties, enhancing the overall quality and performance of the connector.
Having 2 rows loaded with contacts allows for increased connectivity options and flexibility in wiring configurations, making this product versatile for various applications.
With a maximum operating temperature of 120°C, this connector can withstand high-temperature environments, ensuring reliable performance in demanding conditions.
The ability to operate at a minimum temperature of -40°C makes this connector suitable for use in extreme cold environments without compromising performance.
Being a board connector, this product is designed for direct attachment to circuit boards, providing a secure and stable connection for electronic components.
Having a UL flammability rating of 94V-0 indicates that this connector is fire-resistant, offering added safety and protection in case of any electrical faults.
The center polarization key ensures proper alignment and orientation of the connector during installation, preventing misconnections and ensuring efficient operation.
The insulator color of black provides a sleek and professional appearance to the connector, suitable for a wide range of electronic devices and applications.
Compliance with UL and CSA standards ensures that this connector meets industry regulations and quality benchmarks, guaranteeing reliable and safe performance.
With a total of 28 contacts, this connector offers ample connectivity options for multiple components or devices, making it versatile and adaptable to various setups.
The precise mating contact row spacing of 0.1 inch allows for easy alignment and connection between rows, ensuring smooth and efficient installation.
The cable mounting type provides flexibility in installation and connection options, allowing for easy integration with different types of cables and wiring configurations.
Utilizing a crimp termination type ensures secure and reliable connections between the connector and wires, minimizing the risk of loose contacts or signal disruptions.
The female contact gender is compatible with male connectors, enabling easy and reliable interconnections with other electronic components or devices.
The rectangular contact pattern provides a stable and secure interface for mating contacts, ensuring consistent and reliable electrical connections.
Being rated for commercial reliability standards ensures that this connector is suitable for regular and continuous use in commercial applications, guaranteeing long-term performance and durability.
Headers & Edge Type Connectors 22-55-2282 attributes and parameters. Explore more Headers & Edge Type Connectors devices from Molex
Additional Features:
Body Width:
Body Depth:
Body Length:
Connector Type:
Mating Contact Finish:
Contact Gender:
Contact Material:
Contact Pattern:
DIN Conformance:
Filter Feature:
IEC Conformity:
Insulator Color:
Insulator Material:
MIL Conformity:
Manufacturer Series:
Mating Contact Pitch (inch):
Mating Contact Row Spacing (inch):
Mating Info.:
Mixed Contacts:
Mounting Type:
No. of Rows Loaded:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
Polarization Key:
Reference Standard:
Reliability:
Sub-Category:
Termination Type:
Total No. of Contacts:
UL Flammability Code:
22-55-2282 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.40
SB
PCN Assembly/Origin - Mult Devs Cancel Location Change 11/Jul/2022
PCN Packaging - Mult Devs Packaging 03/Feb/2022
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
BSS138
Good-ark Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 6 ohm; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
BAV99
Weitron Technology
RECTIFIER DIODE; Surface Mount: YES; Maximum Operating Temperature: 150 Cel; Maximum Output Current: .215 A; JESD-609 Code: e0; Maximum Forward Voltage (VF): .715 V;
1N4148
Micro Commercial Components
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
1N4148WS
Diodes Incorporated
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
General Diode
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Reverse Recovery Time: .004 us; Terminal Finish: Tin/Lead (Sn/Pb); No. of Elements: 1;
IRLML6402TRPBF
International Rectifier
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.3 W; Peak Reflow Temperature (C): 260; Package Style (Meter): SMALL OUTLINE;
M24308/2-1F
Cinch Connectivity Solutions
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1750VAC; No. of Connectors: ONE; Body Depth: .375 inch;
2N7002
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .83 W; No. of Elements: 1; Transistor Application: SWITCHING;
Sensitron Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148GS08
Temic Semiconductors
LL4148GS08 by Temic Semiconductors is a glass diode with a max reverse recovery time of 0.008 us and max forward voltage of 1 V. It is a rectifier diode with a max output current of 0.15 A, ideal for applications requiring fast switching speeds and low power dissipation in electronic circuits.
BSS138LT3G
Onsemi
BSS138LT3G by Onsemi is a N-CHANNEL FET with a min DS breakdown voltage of 50V. It is used for switching applications and has a max drain current of 0.2A and max drain-source on resistance of 3.5 ohm.
FT232RQ-REEL
FTDI
FTDI's FT232RQ-REEL is a USB bus controller with 32 terminals, operating at 3.3-5.25V. It supports data transfer rates up to 60MBps and clock frequency of 12.02MHz, suitable for RS232/RS422/RS485 interfaces in various applications like industrial automation and communication systems.
NE555D
Texas Instruments
NE555D by Texas Instruments is an 8-terminal IC with a supply voltage range of 4.5V to 16V, suitable for analog waveform generation applications. It operates at temperatures from 0°C to 70°C and has a max supply current of 15mA. The package style is small outline, making it ideal for compact electronic designs.
1N4148WT
Taitron Components
2N2222A
Nte Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 1 W; Maximum Collector Current (IC): .8 A; Terminal Form: WIRE;
KSZ9031RNXIC
Micrel
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 48; Package Code: HVQCCN; Package Shape: SQUARE;
Yangzhou Yangjie Electronics
EPCS4SI8N
Altera
CONFIGURATION MEMORY; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Parallel or Serial: SERIAL;
Hitano Enterprise
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
C1206C104M5RACTU
KEMET Corporation
KEMET C1206C104M5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125°C operating range, and ±20% tolerance. Ideal for surface mount applications in electronics requiring stable capacitance across temperatures.
801-43-025-10-012000
Mill-max Mfg
Mill-max Mfg 801-43-025-10-012000 is a 25-contact board connector with matte tin over nickel finish. It has a terminal pitch of 2.54mm and UL flammability rating of 94V-0. Ideal for applications requiring female socket connectors on PCBs.
1-2199230-5
TE Connectivity
TE Connectivity 1-2199230-5 is a POLYETHYLENE card edge connector with 67 contacts in a 2-row configuration. It has a mating contact pitch of 0.5", operates b/w -40 to 80°C, and features a right-angle mounting style for board applications. Ideal for PCBs requiring 0.5A signal current rating.
BM03B-SRSS-TB(LF)(SN)
J S T Mfg
BM03B-SRSS-TB(LF)(SN) by J S T Mfg is a 3-contact BOARD CONNECTOR with 0.039" pitch, suitable for -25 to 85°C temp range. Featuring POLYAMIDE insulator, COPPER ALLOY contacts, and 100000000 ohm insulation resistance, it's ideal for PCB applications requiring 1A signal current.
801-43-030-10-003000
801-43-030-10-003000 by Mill-max Mfg is a GOLD-finished BOARD CONNECTOR with 30 contacts on a 2.54mm pitch. It features FEMALE contacts in SOCKET style for STRAIGHT mounting on the board. Ideal for high-quality solder connections in electronic applications.
TSW-103-07-T-D
Samtec
Samtec's TSW-103-07-T-D is a 2-row, 6-contact board connector with a mating contact pitch of 0.1". Featuring matte tin finish and phosphor bronze contacts, it has a body width, depth, and terminal length of 0.1 inch each. Ideal for PCB applications requiring reliable male connectors with solder termination in a straight mounting style.
DT06-6S-CE05
Deutsch
BOARD CONNECTOR; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1500VAC; No. of Connectors: ONE; Manufacturer Series: DT;
5-103669-1
TE Connectivity 5-103669-1 is a board connector with 0.1" pitch, suitable for commercial applications. Featuring tin finish, it has an insulation resistance of 5000000000 ohm and operates b/w -65 to 105 °C. Ideal for PCB mounting with solder termination, this male plug connector has a total of 2 contacts in a rectangular pattern.
26-60-4030
Molex
Molex 26-60-4030 is a board connector with 3 contacts, featuring matte tin finish and glass-filled polyester insulator. With 1000000000 ohm insulation resistance, it offers durability of 25 cycles. Ideal for commercial applications requiring reliable connections in straight mounting style.
GHR-08V-S
GHR-08V-S by J S T Mfg is an 8-contact BOARD CONNECTOR with 94V-0 UL Flammability Code. It features FEMALE contacts for CABLE mounting and CRIMP termination. Ideal for applications requiring secure and reliable connections in electronic devices.
S3B-PH-K-S(LF)(SN)
S3B-PH-K-S(LF)(SN) by J S T Mfg is a 3-contact board connector with 0.079" pitch, suitable for applications requiring a max operating temperature of 85°C and insulation resistance of 1Gohm. It features brass contacts with tin over copper finish, press-fit termination, and a UL flammability rating of 94V-0.
22-05-2081
Molex 22-05-2081 is a board connector with 8 contacts, featuring brass contact material and matte tin finish. With a mating pitch of 0.1", it offers high insulation resistance of 1000000000 ohm. Ideal for commercial applications, this connector has a durable design with UL flammability rating of 94V-0.
22-27-2061
The Molex 22-27-2061 is a board connector with 6 contacts, rated at 2.5A signal current. It features a mating contact pitch of 0.1", insulation resistance of 5000000000 ohm, and dielectric voltage withstand of 1500VAC. Ideal for commercial applications requiring reliable connections in temperatures ranging from -40 to 105°C.
FTSH-110-01-L-DV-K-P-TR
Samtec's FTSH-110-01-L-DV-K-P-TR is a 20-contact board connector with a mating contact pitch of 0.05". It features a liquid crystal polymer insulator, matte tin termination finish, and gold mating contacts. Ideal for commercial applications requiring reliable connections in temperatures ranging from -55°C to 125°C.
B3B-XH-A(LF)(SN)
B3B-XH-A(LF)(SN) by J S T Mfg is a BOARD CONNECTOR with 0.098" mating contact pitch, 1000000000 ohm insulation resistance, and 1000VAC dielectric voltage. Ideal for applications requiring a male connector with 3A signal current, it features POLYAMIDE66 insulator material and operates b/w -25 to 85 °C.
22-01-3057
Molex 22-01-3057 is a board connector with 0.1" pitch, suitable for commercial applications. Features include 5 contacts, 4A signal current rating, and -40 to 105°C operating temperature range. Ideal for cable mounting with crimp termination, this female connector offers high durability and polarization key for secure connections.
BM03B-GHS-TBT(LF)(SN)
BM03B-GHS-TBT(LF)(SN) by J S T Mfg is a 7" BOARD CONNECTOR with 0.049" pitch, suitable for PCBs. Features include 100000000 ohm insulation resistance, 500VAC dielectric voltage, and -25 to 85 °C operating range. Ideal for applications requiring male connectors with surface mount termination and POLYAMIDE insulator material.
22-05-7025
The Molex 22-05-7025 is a board connector with 0.098" mating contact pitch, suitable for headers & edge type connectors. Featuring a 1400VAC dielectric voltage, it has a temperature range of -40 to 105°C and offers high durability with 30 cycles. Ideal for commercial applications requiring reliable signal transmission at 3A current rating.
1-2103124-1
TE Connectivity 1-2103124-1 is a BOARD CONNECTOR with GLASS FILLED POLYAMIDE insulator. It has 2 contacts, S0P2 arrangement, and operates b/w -40 to 140°C. Ideal for commercial applications requiring a MALE connector with BLADE PIN-SKT style in a RECEPTACLE shell.
B4B-XH-A-GU
B4B-XH-A-GU by J S T Mfg is a BOARD CONNECTOR with 0.098" pitch, 1000000000 ohm insulation resistance, and 3A signal current rating. Ideal for applications requiring POLARIZED HOUSING, it features POLYAMIDE66 insulator material and operates b/w -25 to 85 °C.
DF13-3S-1.25C
Hirose Electric
DF13-3S-1.25C by Hirose Electric is a 3-contact board connector with 0.049" pitch, 500VAC voltage resistance, and 85°C max operating temp. Ideal for commercial applications, it features female contacts, beige insulator color, and UL94V-0 flammability rating for reliable signal transmission in various environments.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
22-55-2201
The Molex 22-55-2201 is a board connector with 20 contacts, 0.1" pitch, and 0.999" body length. It is used in commercial applications with -40 to 120°C operating temperature range for cable mounting via crimp termination.
22-55-2101
The Molex 22-55-2101 is a 2-row board connector with 0.1" pitch, suitable for commercial applications. Featuring glass-filled polyester insulator, it has 10 contacts and operates b/w -40 to 120°C. With crimp termination and female SQ pin-skt contact style, it is UL and CSA compliant for reliable performance in various electronic devices.
22-55-2081
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Mating Contact Row Spacing (inch): 0.1; Mixed Contacts: NO;
22-55-2102
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body Width: .319 inch; UL Flammability Code: 94V-0; Termination Contact Finish: NOT APPLICABLE;
22-55-2061
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Termination Type: CRIMP; No. of Rows Loaded: 2;
22-55-2241
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Manufacturer Series: 70450; Contact Material: NOT SPECIFIED;
22-55-2322
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Minimum Operating Temperature: -40 Cel; Total No. of Contacts: 32;
22-55-2103
The Molex 22-55-2103 is a dual-polarized board connector with 10 contacts, 0.1" pitch, and GLASS FILLED POLYESTER insulator. It operates b/w -40°C to 120°C, suitable for commercial applications requiring reliable cable mounting with crimp termination. Compliant with UL and CSA standards, it's ideal for electronics needing a compact rectangular connector solution.
22-55-2163
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE OR FEMALE; Mating Contact Row Spacing (inch): 0.1; Mating Contact Pitch (inch): 0.1;
22-55-2403
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE OR FEMALE; Body Width: .199 inch; Polarization Key: DUAL POLARIZED;
22-55-2283
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE OR FEMALE; Body Length: 1.399 inch; Termination Type: CRIMP;
22-55-2303
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE OR FEMALE; Mating Contact Row Spacing (inch): 0.1; Total No. of Contacts: 30;
22-55-2343
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE OR FEMALE; IEC Conformity: NO; MIL Conformity: NO;
22-55-2502
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Insulator Color: BLACK; Mating Contact Row Spacing (inch): 0.1;
22-55-2321
The Molex 22-55-2321 is a 32-contact board connector with a mating contact pitch of 0.1". It features glass-filled polyester insulator, operates b/w -40 to 120°C, and has UL94V-0 flammability rating. Ideal for commercial applications requiring reliable female crimp contacts in a rectangular pattern.
22-55-2122
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Insulator Material: GLASS FILLED POLYESTER; Contact Material: NOT SPECIFIED;
22-55-2222
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; UL Flammability Code: 94V-0; Body Width: .319 inch;
22-55-2262
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Contact Material: NOT SPECIFIED; Minimum Operating Temperature: -40 Cel;
22-55-2243
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE OR FEMALE; Mating Contact Finish: NOT SPECIFIED; Body Width: .199 inch;
22-55-2263
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved