Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Molex 1731120211 CONTACT features CRIMP terminal type, MACHINED contact design, and COPPER ALLOY material. Ideal for applications requiring FEMALE contact gender, STRAIGHT mounting style, and RND PIN-SKT contact style with wire sizes ranging from 22 AWG to 18 AWG.
Median Price
$2.195
Lifecycle Status
Suppliers In-Stock
13
In-Stock Inventory
1k+
Arrow
1+ parts
$1.454
100+ parts
-
1k+ parts
10k+ parts
Mouser Electronics
$3.780
$2.880
$2.270
$2.180
Chip1Stop
$2.340
$1.800
Verical
Compona
Powell Electronics
$2.050
$1.680
Nova Conductors
$1.635
TestEquity
$2.280
Digiode
$2.683
Vyrian
IBS Electronics
$2.223
VNN
TME
$3.130
$2.490
Corphita
$2.542
Andel Nordic
$10.202
$9.794
Netroflash
$1.602
$1.553
$1.520
The ideal finish thickness of 7.87 ensures durability and long-lasting performance of the assembly product.
CRIMP terminals provide a secure and reliable connection, ensuring proper functionality of the assembly product.
MACHINED contact design offers precision and consistency in electrical connections, enhancing the overall quality of the assembly product.
Supporting a minimum wire size of 22 AWG ensures compatibility with a wide range of electrical wiring, making this product versatile.
With a maximum wire size of 18 AWG, this assembly product can handle higher gauge wires, increasing its applicability for various projects.
Having a contact gender of FEMALE allows for seamless integration with corresponding male connectors, ensuring proper connectivity.
The STRAIGHT mounting style offers simplicity and ease of installation, making this assembly product user-friendly.
The RND PIN-SKT contact style provides a secure and stable connection, preventing signal loss or interference in the assembly product.
Constructed with COPPER ALLOY, this assembly product offers excellent conductivity and corrosion resistance, ensuring long-term reliability.
A terminal length of 0.165 inch provides a secure connection point for wires, maintaining stable electrical contact within the assembly product.
Assembly Products 1731120211 attributes and parameters. Explore more Assembly Products devices from Molex
Assembly Item Name:
Connector Accessory Type:
Contact Design:
Contact Gender:
Contact Style:
DIN Conformity:
Finish Thickness:
IEC Conformity:
MIL Conformity:
Material:
Mounting Style:
Terminal Length:
Terminal Type:
Maximum Wire Size:
Minimum Wire Size:
PCN Packaging - Mult Devs Quantity 07/Jun/2021
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
DP83848IVVX/NOPB
Texas Instruments
Texas Instruments DP83848IVVX/NOPB is a 3.3V Ethernet transceiver with 100000 Mbps data rate, suitable for industrial applications. It features CMOS technology, operates b/w -40 to 85 °C, and comes in a low profile flatpack package with matte tin finish.
RC0805FR-0710KL
Yageo
Yageo's RC0805FR-0710KL is a 10000 ohm SMT fixed resistor with 1% tolerance and 0.125 W power dissipation. Ideal for applications requiring resistance to operate b/w -55°C to 155°C, such as in automotive electronics or industrial control systems. Features metal glaze/thick film technology and matte tin finish with nickel barrier.
LM358D-T
NXP Semiconductors
LM358D-T by NXP Semiconductors is a dual operational amplifier with 70dB CMRR, 1000kHz unity gain bandwidth, and 9000uV max input offset voltage. Widely used in commercial applications due to its small outline package and low bias current of 0.5uA.
LL4148-GS08
Telefunken Microelectronics
RECTIFIER DIODE; Surface Mount: YES; JESD-609 Code: e0; No. of Elements: 1; Maximum Operating Temperature: 175 Cel; Maximum Non Repetitive Peak Forward Current: 2 A;
PIC18F4550-I/P
Microchip Technology
PIC18F4550-I/P by Microchip Technology is an 8-bit microcontroller with a max clock frequency of 48 MHz. It features 13-Ch 10-Bit ADC channels and USB connectivity, making it ideal for industrial applications requiring low power consumption and high-speed data processing. With 2048 RAM bytes and 256 Data EEPROM size, this CMOS technology-based microcontroller offers versatile performance in various embedded systems.
M39029/58-360
Conesys
CONNECTOR ACCESSORY; MIL Conformity: YES; Mating Contacts: M39029/57-354; Terminal Type: CRIMP; DIN Conformity: NO; MIL-Connector Accessory Name: CONTACT;
2N2222A
2N2222A by Texas Instruments is a small signal NPN bipolar junction transistor (BJT) with a max collector-emitter voltage of 40V and a max collector current of 0.8A. It is commonly used for switching applications due to its fast turn on/off times (35ns/285ns) and high transition frequency (300MHz).
LM555CN
Rca Solid State
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
1N4148
Weitronic Enterprise
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM7805CT
LM7805CT by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1.5A. It operates b/w 0-125°C, has a dropout voltage of 2V, and offers excellent line/load regulation for various electronic applications.
2N7002
Central Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Drain Current (ID): .115 A; Maximum Drain Current (Abs) (ID): .115 A;
SS14
Leshan Radio
RECTIFIER DIODE; Surface Mount: YES; Config: SINGLE; No. of Phases: 1; No. of Elements: 1; Maximum Forward Voltage (VF): .5 V;
LM107H/883
LM107H/883 by Texas Instruments is a MIL-STD-883 compliant operational amplifier with 3000uV max input offset voltage, 80dB common mode reject ratio, and 250kHz unity gain bandwidth. Ideal for military applications due to its -55 to 125 °C operating temperature range and robust metal package body material.
SS495ASP
Micro Switch
The Micro Switch SS495ASP is an analog circuit IC with a supply voltage range of 4.5V to 10.5V, suitable for automotive applications. Its package body material is plastic/epoxy, and it has a rectangular shape with three terminals. Operating temperature ranges from -40°C to 125°C, making it ideal for various automotive sensor and control systems.
LM2931AZ-5.0G
Onsemi
LM2931AZ-5.0G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 5V and max output current of 0.1A. It has a max dropout voltage of 0.6V, making it suitable for applications requiring stable power supply in temperature-sensitive environments up to 125°C. The package style is cylindrical with wire terminals, ideal for rail packing methods in various electronic devices.
Fairchild Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
BAV99
Cheng-yi Electronic
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
SZNUP2105LT1G
SZNUP2105LT1G by Onsemi is a Transient Suppression Device with 2 elements in a common anode configuration. It has a max non-repetitive peak reverse power dissipation of 350W and breakdown voltage of 29.1V. Ideal for applications requiring bidirectional polarity protection, such as automotive electronics and industrial equipment due to its AEC-Q101 compliance and high clamping voltage of 44V.
FDC5614P
TAIZHOU ELECTRONICS CO LTD
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.92 W; Maximum Operating Temperature: 150 Cel; Package Body Material: PLASTIC/EPOXY;
LM317T
Linear Technology
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Operating Temperature (TJ-Min): 0 Cel; No. of Functions: 1; JESD-609 Code: e0;
281934-2
TE Connectivity
TE Connectivity 281934-2 is a SEALING ITEM with Silicone material. It has a max operating temp of 130°C and min of -40°C. Supports up to 0 AWG wire size and 2.4" cable entry, ideal for various assembly applications.
DF11-22SCFA(04)
Hirose Electric
CONNECTOR ACCESSORY;
ZE05-2022SCF
936012157
Molex
12124582
Aptiv
Aptiv 12124582 CONTACT is a CRIMP terminal made of COPPER ALLOY for FLRY-B cables. It has a 0.075-0.11 inch cable entry range, ideal for automotive wiring harness assembly. This Assembly Product offers precise and reliable connections in vehicle electrical systems.
216-208
Wago
TERMINAL BLOCK ACCESSORY; Maximum Wire Size: 10 AWG; MIL Conformity: NO; Assembly Item Name: FERRULE; IEC Conformity: NO; Additional Features: STANDARD: DIN 46228;
33000-1003
Molex 33000-1003 is a male contact assembly product for MX150 connectors. It features crimp terminals, copper alloy material, and can handle up to 10A current at 500V DC. With operating temperatures from -40°C to 105°C, it accommodates wire sizes up to 22 AWG in straight mounting applications.
2010-405
TERMINAL BLOCK ACCESSORY;
AW2S-C
Amphenol
CONNECTOR ACCESSORY; Manufacturer Series: AW2S-C;
AWP-2P
CONNECTOR ACCESSORY; Usage: ATP06; Maximum Operating Temperature: 125 Cel; DIN Conformity: NO; IEC Conformity: NO; MIL Conformity: NO;
1731110082
Molex 1731110082 is a zinc alloy BACKSHELL for D-SUB CONNECTOR with 0.118" to 0.335" cable entry. It can operate b/w -35°C to 100°C, mounted using 4-40 UNC screws. Ideal for applications requiring secure cable connections in various environments.
057105-000
AW12P
AW12P by Amphenol is an assembly product for AT Series connectors. It has a temperature range of -55°C to 125°C, suitable for various environments. With a wire size compatibility of 20-14 AWG and made of polyethylene, it ensures reliable connections in diverse applications.
13711542
Delphi Connection Systems
CONNECTOR ACCESSORY; Cable Types: FLRY-B; Material: COPPER ALLOY; Maximum Cable Entry: .063 inch; Assembly Item Name: CONTACT; Minimum Cable Entry: .0472 inch;
12048074
CONNECTOR ACCESSORY; Contact Gender: FEMALE; MIL Conformity: NO; Mounting Style: STRAIGHT; Additional Features: CONTACT FINISH: TIN; IEC Conformity: NO;
770854-3
TE Connectivity's 770854-3 contact features crimp terminal type, stamped contact design, and copper alloy material. With a wire gauge of 16 AWG and rated current of 17 A, it is ideal for applications requiring female gender contacts with round pin-socket style in straight mounting.
160773-6
TE Connectivity 160773-6 is a CRIMP terminal with wire gauge 15 AWG, suitable for DISCRETE WIRE cables. It has a contact gender of FEMALE and mounting style STRAIGHT, made of BRASS material. Operating temperature ranges from -40 to 110 °C, with cable entry ranging from 0.09 to 0.13 inch.
SAN-002T-0.8A
J S T Mfg
SAN-002T-0.8A by J S T Mfg is a CRIMP terminal with approvals from CSA and UL, rated for 2A current at 250V AC/DC. It is used in SAN CONNECTOR applications, supporting wire sizes from 30 to 24 AWG with a temperature range of -25 to 85°C.
G125-0010005
Harwin Plc
G125-0010005 by Harwin PLC is a female contact with round pin-socket style, made of beryllium copper. It has a rated current of 2.8A and can handle up to 450V AC/DC voltage. With a terminal length of 0.079 inch, it is ideal for signal applications requiring crimp terminals in assemblies with 0.031 inch cable entry.
963225-1
CONNECTOR ACCESSORY; Wire Gauge (AWG): 0; Maximum Wire Size: 0 AWG;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
1731110058
The Molex 1731110058 is a BACKSHELL assembly product designed for FCT D-SUB usage. It has a min cable entry of 0.315" and a max cable entry of 0.492". Made of zinc alloy, it can withstand temperatures ranging from -35°C to 100°C.
1731110060
Molex 1731110060 BACKSHELL is ideal for FCT D-SUB applications. Features include 0.315" min and 0.492" max cable entry, ZINC ALLOY material, -35 to 100°C operating temp range, and SCREW mounting options (4-40 UNC).
1731110081
CONNECTOR ACCESSORY; IEC Conformity: NO; Assembly Item Name: BACKSHELL; MIL Conformity: NO; Mounting Option-2: SCREW; Material: METAL;
1731120248
CONNECTOR ACCESSORY; Usage: FCT D-SUB; DIN Conformity: NO; Mounting Option-2: SCREW; Assembly Item Name: SCREW LOCK; MIL Conformity: NO;
1731110062
CONNECTOR ACCESSORY; Usage: FCT D-SUB, SIZE 3; Mounting Option-1: #4-40; Assembly Item Name: BACKSHELL; DIN Conformity: NO; Mounting Option-2: SCREW;
1731110086
Molex 1731110086 backshell for FCT D-SUB, SIZE 1 with 0.197" min and 0.315" max cable entry. Made of ZINC ALLOY, it can withstand -35 to 100°C. Mounting option includes SCREW for secure installation in various applications.
1731110065
CONNECTOR ACCESSORY; Maximum Cable Entry: .591 inch; Minimum Operating Temperature: -35 Cel; Material: ZINC ALLOY; Mounting Option-1: 4-40 UNC; DIN Conformity: NO;
1731120208
CONNECTOR ACCESSORY; DIN Conformity: NO; Maximum Wire Size: 22 AWG; Finish Thickness: 51.18; Contact Gender: MALE; Terminal Type: CRIMP;
1731120300
CONNECTOR ACCESSORY; Material: BRASS; Assembly Item Name: SCREW LOCK; MIL Conformity: NO; Mounting Option-2: SCREW; Mounting Option-1: 4-40 UNC;
1731120209
CONNECTOR ACCESSORY; Assembly Item Name: CONTACT; Material: COPPER ALLOY; Terminal Type: CRIMP; Minimum Wire Size: 24 AWG; Maximum Wire Size: 20 AWG;
1731120214
The Molex 1731120214 contact features a finish thickness of 7.87, crimp terminal type, and machined contact design. Ideal for applications requiring female contacts with straight mounting style and copper alloy material. Supports wire sizes from 24 AWG to 20 AWG in various assembly products.
1731110059
1731120342
CONNECTOR ACCESSORY; IEC Conformity: NO; MIL Conformity: NO; DIN Conformity: NO; Material: STEEL; Mounting Option-2: SCREW;
1731120380
CONNECTOR ACCESSORY; Mounting Option-2: SCREW; Mounting Option-1: #4-40 UNC; Assembly Item Name: SCREW LOCK; MIL Conformity: NO; Usage: FCT D-SUB;
1731120050
Molex 1731120050 is a CONTACT assembly product designed for FCT D-SUB usage. It has a finish thickness of 32 and can operate in temperatures ranging from -55 to 135 °C. This male contact with round pin socket design is made of copper alloy and can handle a rated current of 2A, compatible with cable types RG174U, RG188AU, and RG316U.
1731120200
1731120215
CONNECTOR ACCESSORY; Rated Current: 7.5 A; Assembly Item Name: CONTACT; Additional Features: CONTACT FINISH - GOLD OVER NICKEL; Mounting Style: STRAIGHT; Usage: FCT D-SUB;
1731120273
CONNECTOR ACCESSORY; Mounting Option-1: 4-40 UNC; Mounting Option-2: M3; IEC Conformity: NO; MIL Conformity: NO; DIN Conformity: NO;
1731120062
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved