Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
RECTANGULAR POWER CONNECTOR; Termination Contact Finish: NOT APPLICABLE; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED;
Median Price
$1.900
Lifecycle Status
Suppliers In-Stock
3
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
100+ parts
$1.490
1k+ parts
$1.070
10k+ parts
$0.823
Digiode
$1.796
-
Vyrian
$1.890
Corphita
$1.701
Andel Nordic
$35.180
$24.623
Power Connectors 172673-3003 attributes and parameters. Explore more Power Connectors devices from Molex
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Material:
172673-3003 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
BSS138
NXP Semiconductors
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; No. of Terminals: 3; Maximum Drain Current (ID): .2 A; Operating Mode: ENHANCEMENT MODE;
1N4148WT
Surge Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SMBJ18CA
Pro-an Electronic
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Polarity: BIDIRECTIONAL; Nominal Breakdown Voltage: 21.05 V; Maximum Repetitive Peak Reverse Voltage: 18 V;
NE555D
SQUARE; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: LSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LM317BD2TG
Onsemi
LM317BD2TG by Onsemi is an adjustable positive single output standard regulator with a max output current of 1.5A and a max load regulation of 5.8%. Operating temperature ranges from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact designs.
2N7002
Secos
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .3 W; Maximum Drain Current (ID): .115 A; Maximum Drain-Source On Resistance: 7.5 ohm;
261
New England Microwave
Other Interface ICs; No. of Terminals: 14; Package Equivalence Code: FL14(UNSPEC); Power Supplies (V): +-5,-15; Package Body Material: PLASTIC/EPOXY; Surface Mount: YES;
2N2222A
Good-ark Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): 1.8 W; Maximum Collector Current (IC): .8 A;
SSL-LXA228SRC-TR11
Lumex
SSL-LXA228SRC-TR11 by Lumex is a 1.9mm SINGLE COLOR LED with peak wavelength of 660nm and max forward current of 0.03A. Ideal for applications requiring SUPER RED light emission, such as indicator lights in electronic devices due to its clear lens and surface mounting feature.
LAN8720A-CP-TR
Standard Microsystems
ETHERNET TRANSCEIVER; Temperature Grade: OTHER; Terminal Form: NO LEAD; No. of Terminals: 24; Package Code: HVQCCN; Package Shape: SQUARE;
STM32H743XIH6
STMicroelectronics
STM32H743XIH6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, 36-Ch 16-Bit ADC, and 2-Ch 12-Bit DAC. It operates at up to 48 MHz, has 1085440 bytes of RAM, and offers connectivity options like CAN, I2C, USB. Ideal for industrial applications requiring high-performance processing and extensive peripheral support.
Bytesonic Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .6 A; No. of Elements: 1;
CRGCQ0805F10K
TE Connectivity
TE Connectivity's CRGCQ0805F10K is a 10000 ohm fixed resistor with 1% tolerance. It operates b/w -55 to 155 °C and has a power dissipation of 0.125 W. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance.
1N4148
Continental Device India
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Bharat Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
L7805CV
L7805CV by STMicroelectronics is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1.5A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring stable voltage regulation in electronic circuits.
ECS-.327-12.5-17X-TR
Ecs International
ECS-0.327-12.5-17X-TR by Ecs International is a crystal oscillator with 20 ppm frequency tolerance, 144% stability, and 50000 ohm series resistance. Ideal for applications requiring precise timing in temperature ranges from -40 to 85 °C, such as telecommunications and industrial automation.
LM317T
Bay Linear
Other Regulators; No. of Terminals: 3; No. of Outputs: 1; Surface Mount: NO; Maximum Load Regulation (%): 1.5 %; Operating Temperature (TJ-Min): 0 Cel;
LM358AN
Fairchild Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
LL4148
Hy Electronic
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
1-770166-0
TE Connectivity's 1-770166-0 Power Connector features a rated voltage of 600V, insulation resistance of 100M ohm, and a signal current rating of 9.5A. With board mounting options and durable construction, it is ideal for commercial applications requiring reliable power connections.
2-917809-2
TE Connectivity's 2-917809-2 is a rectangular power connector with GLASS FILLED POLYESTER insulator, 1.85"x1.051"x1.85" dimensions, and 4 contacts. Operating from -55 to 105°C, it has UL94V-0 flammability rating and crimp termination for commercial applications in cable mounting setups.
1827540-1
TE Connectivity's 1827540-1 is a rectangular power connector with 48 contacts in 3 loaded rows. It has an operating temperature range of -55 to 105°C, suitable for cable mounting applications. The insulator material is glass filled polyethylene/polyester, and it features crimp termination and a receptacle shell style.
1-794617-8
TE Connectivity 1-794617-8 is a Power Connector with 18 contacts, rated for 250V and 5A. Featuring POLYAMIDE66 insulator material, it has a mating contact pitch of 0.118" and operates b/w -40 to 105°C. Ideal for commercial applications requiring reliable power connections.
43650-0201
Molex
The Molex 43650-0201 is a rectangular power connector with a mating contact pitch of 0.118". Featuring matte tin over nickel termination, it has a body width of 0.172" and insulator made of glass-filled liquid crystal polymer. Ideal for board mounting applications, this connector offers reliable performance in commercial settings.
10-84-5020
The Molex 10-84-5020 is a rectangular power connector with 2 contacts, featuring bright tin termination finish and polyester insulator material. It has an insulation resistance of 1Gohm, dielectric voltage of 500VAC, and operates b/w -55 to 105°C. Ideal for board mounting applications requiring durability and reliability in commercial settings.
1-1827875-6
TE Connectivity 1-1827875-6 is a rectangular power connector with 12 contacts, rated at 5A. It features glass-filled polyester insulator, solderable retention clips for board mounting, and UL94V-0 flammability code. Ideal for applications requiring a polarized male connector with a pitch of 2.5mm in black color.
1-350344-0
TE Connectivity 1-350344-0 is a rectangular power connector with POLYAMIDE insulator. It has 0.95"x.275"x.815" dimensions, operates b/w -55 to 105°C, and UL 94V-2 flammability rating. Ideal for cable mounting applications requiring crimp termination and accommodating 115/230VAC mains connectors.
VLR-06V
J S T Mfg
VLR-06V by J S T Mfg is a POWER CONNECTOR with 6 contacts, made of POLYAMIDE66. It has a UL Flammability Code of 94V-0 and uses CRIMP termination. Ideal for applications requiring reliable power connections in various industries.
172298-1210
RECTANGULAR POWER CONNECTOR; Termination Contact Finish: MATTE TIN OVER NICKEL; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED;
IPS1-125-01-S-D
Samtec
The Samtec IPS1-125-01-S-D is a rectangular power connector with 50 contacts. It features phosphor bronze contact material with gold finish and liquid crystal polymer insulator. Ideal for board mounting applications requiring solder termination, especially in power systems.
1-178316-3
TE Connectivity 1-178316-3 is a rectangular power connector with 6 contacts, rated at 9.5A signal current. It features glass-filled polyester insulation, solderable retention clips for board mounting, and a temperature range of -55 to 105°C. Ideal for commercial applications requiring durable connectors with UL certification.
2-1445057-2
TE Connectivity's 2-1445057-2 is a RECTANGULAR POWER CONNECTOR with 0.118" Mating Contact Pitch, rated for 250V and 5A signal current. Ideal for board mounting applications, it features POLYAMIDE insulation, -40 to 105°C operating temperature range, and UL94V-0 flammability rating.
39-30-0120
Molex 39-30-0120 is a rectangular power connector with 12 contacts, POLYAMIDE66 insulator, and 100u plating thickness. It has a dielectric voltage of 1500VAC and operates b/w -40 to 105 °C. Ideal for board mounting applications requiring durable male connectors with solder termination.
178740-9
TE Connectivity's 178740-9 is a rectangular power connector with insulation resistance of 100MΩ, dielectric voltage withstand of 2200VAC, and operating temperature range from -30 to 105°C. Ideal for commercial applications, this male connector features crimp termination and panel mounting.
43025-1208
The Molex 43025-1208 is a rectangular power connector with 12 contacts, POLYAMIDE insulator, and 1000VAC dielectric voltage. It is used in cable applications, featuring female contacts and hybrid contact style for durability up to 30 cycles. This commercial-grade connector operates b/w -40°C to 105°C, meeting CSA, TUV, and UL standards.
IPBD-04-D
The Samtec IPBD-04-D is a Power Connector with 0.7" body length and 0.478" width. It has 8 contacts, TIN over NICKEL finish, and operates b/w -40°C to 105°C. Ideal for commercial applications requiring a reliable crimped female connector with UL standard compliance.
10132445-06LF
Amphenol Communications Solutions
POWER CONNECTOR; Reliability: COMMERCIAL; Contact Material: COPPER ALLOY;
66484-001
AMPHENOL ICC
Amphenol Icc 66484-001 is a RECTANGULAR POWER CONNECTOR with POLYAMIDE insulator, UL 94V-2 flammability rating. Featuring 4 FEMALE contacts for CABLE AND PANEL mounting, it's ideal for power applications requiring reliable wire termination.
1723103104
Molex 1723103104 Power Connector has dimensions of 0.681" x 0.352" x 0.614". Made of Liquid Crystal Polymer, it operates b/w -40°C to 105°C. With 4 contacts, it is used for board mounting applications requiring male SQ pin-skt contacts and solder termination.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved