Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
MCP3208-BI/SL by Microchip Tech is an 8-channel ADC with 12-bit resolution, 0.0244% linearity error, and 0-5V analog input range. Ideal for industrial applications, it offers a sample rate of 0.1 MHz, operates at -40 to 85°C, and features a small outline package for surface mount assembly.
Median Price
$5.760
Lifecycle Status
Suppliers In-Stock
19
In-Stock Inventory
1k+
Verical
1+ parts
$4.252
100+ parts
-
1k+ parts
10k+ parts
Chip1Stop
$5.740
$3.600
Mouser Electronics
DigiKey
$4.360
Newark
$5.930
$4.490
Farnell
$5.977
$4.531
$4.441
Element14
$6.254
$4.735
Master Electronics
$3.990
$3.730
$3.650
Nova Conductors
$4.620
Maritex
$14.345
$7.632
$6.779
Chip Stock
IBS Electronics
$6.339
$5.975
Micros
$4.493
$4.399
Vyrian
Micros sp.j. W. Kędra i J. Lic
$4.830
ACDS - Activité Composants Distribution Service
Fibra_Brandt Electronic GMBH
Partservice
$4.380
$4.288
Sensible Micro Corp
$4.417
$4.077
Semicontronic
$3.500
$3.412
$3.395
Ampacity Inc.
Argo Parts USA
$4.411
Vigor
$4.570
Continental Prestige Electronics
$5.000
$3.790
Aztec Data Supply Inc.
$5.300
Modulus Dynamics
$9.277
Advanced Electronics
$15.216
$14.455
Corohmni
$23.992
Authorized Procurement Solutions
Lixinc
A-Z Elektronik GmbH
Fulton Briggs Corp.
Perfect Parts
Futuretech Components
S.R.D Solutions
Robosynatics
Lucentia Tech
$22.808
$22.342
Infinite Electronics LLP (Excess)
Cyclops Electronics Ltd (Excess)
Glotronic Ltd.
iodParts Technologies Inc.
Plastic/Epoxy material provides durability and protection for the internal components of the Analog-to-Digital Converter.
Having 8 analog input channels allows for simultaneous conversion of multiple signals, increasing efficiency in processing data.
Surface mounting capability makes it easy to integrate this ADC into various electronic circuits and devices.
With a higher number of bits (12), this ADC can provide more precise and accurate digital conversion of analog signals.
Operating at a standard 5V power supply makes it compatible with most electronic systems and applications.
Being able to operate at a high temperature of 85°C makes this ADC suitable for industrial applications where heat may be a factor.
With a fast sample rate of 0.1 MHz, this ADC can efficiently capture and convert analog signals into digital data.
CMOS technology offers low power consumption, high speed, and compatibility with various digital systems, making this ADC energy-efficient and versatile.
Analog-to-Digital Converters MCP3208-BI/SL attributes and parameters. Explore more Analog-to-Digital Converters devices from Microchip Technology
Converter Type:
No. of Analog In Channels:
No. of Functions:
No. of Bits:
Sub-Category:
Output Bit Code:
Output Format:
Maximum Linearity Error (EL):
Sample Rate:
Hold Mode:
Maximum Conversion Time:
Power Supplies:
Minimum Analog Input Voltage:
Maximum Analog Input Voltage:
Nominal Supply Voltage:
Nominal Negative Supply Voltage:
Moisture Sensitivity Level (MSL):
Minimum Operating Temperature:
Maximum Operating Temperature:
Temperature Grade:
Peak Reflow Temperature:
Maximum Time At Peak Reflow Temperature:
Terminal Position:
No. of Terminals:
Terminal Form:
Terminal Pitch:
Surface Mount:
Width:
Length:
Maximum Seated Height:
Package Body Material:
Package Style:
Package Shape:
Package Equivalence Code:
Package Code:
JESD-30 Code:
Qualified:
JESD-609 Code:
Screening Level:
MCP3208-BI/SL Converters trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Packaging - Label and Packing Changes 23/Sep/2015 Packing Changes 10/Oct/2016
Microchip Technology Incorporated is a leading provider of integrated circuit (IC) solutions for the global market. Founded in 1989, the company designs, manufactures, tests and markets state-of-the-art microcontrollers and analog devices for use in a wide array of electronics applications, such as the automotive industry, consumer electronics and industrial automation. Through its world-class production processes and technologies, Microchip Technology has become an innovator of semiconductor solutions that enable customers to maximize their performance while streamlining costs.
President and CEO
Ganesh Moorthy
Executive Chair
Steve Sanghi
CFO, Senior VP
J. Eric Bjornholt
Fab 5 - Colorado
Fabrication
Fab Initiation
1995
USA
Colorado Springs
Wafer Capacity
70,000
Santa Clara
1990
1,290
Lawrence
1989
5,000
Fab 4 - Gresham
1988
Gresham
50,000
Fab 2 - Tempe
1994
Tempe
30,000
Beverly
1985
2,000
Lowell
1986
15,000
Garden Grove
12,000
New Fab - Gresham
2024
LM555CMX
Onsemi
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
1N4148
Invensys Sensor Systems
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; Maximum Repetitive Peak Reverse Voltage: 100 V;
EU2B-YS2J03F
Idec
ROTARY SWITCH;
LM317TG
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Minimum Input-Output Voltage Differential: 3 V; Qualification Status: Not Qualified; No. of Functions: 1;
E8WSDC12-32.768KTR
Abracon
Abracon's E8WSDC12-32.768KTR crystal oscillator offers 20 ppm frequency tolerance, 144% stability, and 70000 ohm series resistance. Ideal for applications requiring precise timing at 0.032768 MHz, such as IoT devices and communication systems.
LL4148-GS08
Telefunken Microelectronics
RECTIFIER DIODE; Surface Mount: YES; JESD-609 Code: e0; No. of Elements: 1; Maximum Operating Temperature: 175 Cel; Maximum Non Repetitive Peak Forward Current: 2 A;
SMMBT2222ALT1G
SMMBT2222ALT1G by Onsemi is a NPN BJT transistor with 3 terminals, 0.6A IC, and 40V VCE. It has a hFE of 75, fT of 300MHz, and operates up to 150°C. Ideal for small signal applications in automotive electronics due to AEC-Q101 compliance.
Semiconductors
RECTIFIER DIODE; Surface Mount: NO; Maximum Repetitive Peak Reverse Voltage: 100 V; Config: SINGLE; No. of Phases: 1; No. of Elements: 1;
M39029/58-360
Defense Logistics Agency
CONNECTOR ACCESSORY; Contact Type: CRIMP REAR RELEASE; Mating Contacts: M39029/56-348, M39029/57-354; Insertion Tool Sources: MILITARY; Contact Gender: MALE; Alternate Contact Sources: MILITARY;
LM317T
Fairchild Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Output Current-1: 1.5 A; No. of Outputs: 1; Qualification Status: Not Qualified;
SMBJ18CA
Zowie Technology
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
ATMEGA328P-AU
Microchip Technology
ATMEGA328P-AU by Microchip: 8-bit RISC CPU, 20 MHz clock, 23 I/O lines. Ideal for industrial applications with SPI, TWI, USART connectivity and low power mode. Features include 2048 RAM bytes, 1024 EEPROM size, and 16384 ROM words.
BSS138
Vishay Semiconductors
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Package Style (Meter): SMALL OUTLINE; Package Shape: RECTANGULAR; Transistor Application: SWITCHING;
DS18B20
Maxim Integrated
DS18B20 by Maxim Integrated is a 12-bit digital temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, with ±0.5°C accuracy. Commonly used in applications requiring precise temperature monitoring like HVAC systems and industrial automation.
1N4148WS
Rochester Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99
Rfe International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
SS14
SPC TECHNOLOGY/ MULTICOMP
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
L7805CV
Sgs-ates Componenti Electronici S P A
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Terminal Finish: Tin/Lead (Sn/Pb); Nominal Output Voltage-1: 5 V;
1N5819HW-7-F
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Taiwan Semiconductor
AD7323BRUZ-REEL
Analog Devices
AD7323BRUZ-REEL by Analog Devices is a 12-bit ADC with 4 analog in channels, 0.0269% linearity error, and 1.6us conversion time. Ideal for industrial applications requiring precise analog-to-digital conversion at a sample rate of 0.5MHz. Package style: small outline, thin profile, shrink pitch.
LTC2485CDD#PBF
LTC2485CDD#PBF by Analog Devices is a 24-bit ADC with a sample rate of 0.0000075 MHz. It operates at temperatures from 0 to 70 °C and has a small outline package style. Ideal for applications requiring high-resolution analog-to-digital conversion in commercial-grade environments.
LTC2433-1IMS#TRPBF
Linear Technology
ADC, DELTA-SIGMA; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 10; Package Code: TSSOP; Package Shape: SQUARE;
ADC128S052CIMTX/NOPB
National Semiconductor
ADC, SUCCESSIVE APPROXIMATION; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: TSSOP; Package Shape: RECTANGULAR;
ADS1263IPW
Texas Instruments
The Texas Instruments ADS1263IPW is a 32-bit ADC with 10 analog input channels, operating at a sample rate of 0.038 MHz. Ideal for automotive applications, it offers high linearity (EL: 0.0012%) and operates in a wide temperature range (-40 to 125°C).
ADS1234IPW
ADS1234IPW by Texas Instruments is a 24-bit ADC with 4 analog in channels, operating at 5V. It features 0.001% max linearity error and a sample rate of 0.00008 MHz. Ideal for industrial applications requiring precise analog-to-digital conversion in a compact package.
LTC1859CG#PBF
LTC1859CG#PBF by Analog Devices is a 16-bit ADC with 8 analog in channels, 0.0046% max linearity error, and 5us conversion time. Ideal for commercial applications requiring high precision data acquisition at up to 0.1MHz sample rate. Package style: small outline, shrink pitch; terminal form: gull wing.
AD7768-4BSTZ
AD7768-4BSTZ by Analog Devices is a 24-bit ADC with 4 analog input channels, 0.0007% linearity error, and 0.256 MHz sample rate. Ideal for industrial applications requiring precise data conversion, it operates b/w -40 to 105°C with a max analog input voltage of 5.5V.
LTC1865LACMS#PBF
ADC, SUCCESSIVE APPROXIMATION; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 10; Package Code: TSSOP; Package Shape: SQUARE;
ADS1210U
The Texas Instruments ADS1210U is a 24-bit ADC with 0.0015% EL, 4 analog in channels, and 5V power supply. Ideal for industrial applications, it offers a sample rate of 0.001 MHz and operates b/w -40 to 85°C. With a small outline package style, it's suitable for surface mount designs.
ADC128S102CIMTX
ADC128S102CIMTX by Texas Instruments is a 12-bit ADC with 8 analog in channels, 1 MHz sample rate, and 0.0244% max linearity error. Ideal for industrial applications, it operates b/w -40 to 105°C and has a small outline package style.
ADS1015IDGST
The Texas Instruments ADS1015IDGST is a 12-bit ADC with 4 analog in channels, operating at a sample rate of 0.0033 MHz. With a max linearity error of 0.0122%, it's ideal for automotive applications due to its small outline package and wide temperature range (-40 to 125 °C).
ADS1271IPWR
The Texas Instruments ADS1271IPWR is a 24-bit ADC with 0.0015% EL, operating at 105°C. It features a sample rate of 0.105 MHz and supports supply voltages of 1.8/3.3,5 V. Ideal for industrial applications requiring high precision analog-to-digital conversion in compact designs with surface mount capabilities.
AD7655ASTZ
AD7655ASTZ by Analog Devices is a 16-bit ADC with 4 analog input channels, 1 MHz sample rate, and 0.0092% max linearity error. It is ideal for industrial applications requiring precise analog-to-digital conversion in a compact square package with low power consumption.
LTC2335HLX-18#PBF
LTC2335HLX-18#PBF by Analog Devices is an 18-bit ADC with 8 analog in channels, 0.0015% max linearity error, and 1 MHz sample rate. Ideal for automotive applications, it operates from -40 to 125°C and has a max conversion time of 0.55 us.
LTC2440IGN#TR
LTC2440IGN#TR by Analog Devices is a 24-bit ADC with 0.0015% EL, 0.35 MHz sample rate, and 170000 us max conversion time. Ideal for industrial applications, this CMOS converter has a 5V nominal voltage and serial output format.
ADS7844EB/2K5
Burr-Brown Corporation
ADC, SUCCESSIVE APPROXIMATION; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 20; Package Code: SSOP; Package Shape: RECTANGULAR;
ADS114S08IRHBR
Texas Instruments ADS114S08IRHBR is a 16-bit ADC with 12 analog in channels, 0.0015% EL, and 0.406 us conversion time. Ideal for automotive applications due to its -50 to 125 °C operating temperature range and 3.3 V nominal voltage. Package style: CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE.
ADS1212U
The Texas Instruments ADS1212U is a 22-bit ADC with 0.0015% EL, operating at 5V. Ideal for industrial applications, it offers a sample rate of 0.001 MHz and supports both OFFSET BINARY and 2'S COMPLEMENT BINARY output formats. With a compact design and high linearity, it's suitable for precise analog-to-digital conversion in various electronic systems.
ADS8568SPMR
Texas Instruments ADS8568SPMR is a 16-bit ADC with 8 analog in channels, 0.0069% EL, and 1.7us conversion time. Ideal for automotive applications, it operates at -40 to 125 °C with a sample rate of 0.5 MHz and supports serial/parallel output formats.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
MCP3421A0T-E/CH
MCP3421A0T-E/CH by Microchip: 18-bit ADC with 0.0035% linearity error, 2.048V max analog input voltage, and 0.00024 MHz sample rate. Ideal for industrial applications requiring precise analog-to-digital conversion in a compact package.
MCP3208-CI/SL
MCP3208-CI/SL by Microchip Tech: 12-bit ADC with 8 channels, 0.0488% linearity error, 0-5V analog input. Ideal for industrial applications requiring high-speed 0.1 MHz sampling rate and small outline package. Operates in -40 to 85°C range, suitable for surface mount designs needing precise analog-to-digital conversion.
MCP3021A0T-E/OT
MCP3021A0T-E/OT by Microchip is a 10-bit ADC with 0.0977% EL, 3/5V supplies, and 8.96us conversion time. Ideal for automotive applications due to its TS16949 screening, -40 to 125°C operating range, and compact design. This ADC offers high accuracy and fast sampling at 0.0223MHz rate in a small outline package.
MCP3421A0T-E/CHVAO
MCP3421A0T-E/CHVAO by Microchip is an 18-bit ADC with 0.0035% EL, 2.048V max analog input voltage, and 0.00024 MHz sample rate. Ideal for industrial applications requiring precise analog-to-digital conversion in a compact package with AEC-Q100 screening level.
MCP3551-E/SN
MCP3551-E/SN by Microchip Tech is a 22-bit ADC with 0.0006% EL, operating at -40 to 125 °C. Ideal for automotive apps, it has a sample rate of 0.02816 MHz and outputs in serial format. With dual terminals and small outline package style, it consumes only 0.17 mA at 5V supply voltage.
MCP3422A0-E/SN
MCP3422A0-E/SN by Microchip Tech: 18-bit ADC with 2 analog in channels, 3/5V supply, 0.0035% linearity error. Ideal for automotive apps due to TS16949 screening, small outline package & serial output format.
MCP3428-E/SL
MCP3428-E/SL by Microchip Tech: 16-bit ADC with 4 channels, 2.048V max analog input, 0.024 MHz sample rate. Ideal for automotive apps due to TS16949 screening, -40 to 125°C temp range & small outline package.
MCP3421A0T-E/OT
MCP3421A0T-E/OT by Microchip: 18-bit ADC with 0.0035% linearity error, 2.048V max analog input voltage, and 0.00024 MHz sample rate. Ideal for automotive applications due to its small size, low profile package, and serial output format.
MCP3551T-E/MS
MCP3551T-E/MS by Microchip Tech is a 22-bit ADC with 0.0006% EL, operating at 2.7/5V. Ideal for automotive apps, it offers a sample rate of 0.02816 MHz and output in 2'S COMPLEMENT BINARY format. With small outline package style and dual terminals, it suits space-constrained designs.
MCP3021A1T-E/OT
MCP3021A1T-E/OT by Microchip is a 10-bit ADC with 0.0977% EL, 8.96us conversion time, and 0.25mA supply current. Ideal for automotive applications, it operates b/w -40 to 125°C with a max analog input voltage of 5.8V. The small outline package measures 2.95mm x 1.63mm x 1.45mm and features a serial output format at 0.0223MHz sample rate.
MCP3424-E/SL
MCP3424-E/SL by Microchip Tech is a 18-bit ADC with 2 analog in channels, 0.0035% EL, and 0.0024 MHz sample rate. Ideal for automotive applications due to its TS 16949 screening level and -40 to 125 °C operating temp range. Package: PLASTIC/EPOXY, Surface Mount: YES, Output Format: SERIAL.
MCP3221A5T-E/OT
MCP3221A5T-E/OT by Microchip Technology is a 12-bit ADC with 1 analog input channel. It operates at a max temperature of 125°C and has a sample rate of 0.0223 MHz. This converter is commonly used in automotive applications due to its small size and low power consumption.
MCP3424-E/ST
MCP3424-E/ST by Microchip: 18-bit ADC with 2 analog in channels, 2.048V max input voltage, and 0.0024 MHz sample rate. Ideal for automotive applications due to TS16949 screening level and -40 to 125°C operating temperature range.
MCP3425A0T-E/CH
MCP3425A0T-E/CH by Microchip: 16-bit ADC, 5V supply, 2.048V max analog input. Ideal for automotive applications due to TS16949 screening and small form factor. Converts at 0.00024 MHz with serial output in a compact package.
MCP3426A0-E/SN
MCP3426A0-E/SN by Microchip Tech: 16-bit ADC with 2 analog in channels, max analog input voltage of ±2.048V, and sample rate of 24kHz. Ideal for automotive applications due to TS16949 screening level and small outline package style.
MCP3021A5T-E/OT
MCP3021A5T-E/OT by Microchip is a 10-bit ADC with 0.0977% EL, operating at 3/5V. Ideal for automotive applications, it offers a fast conversion time of 8.96us and operates in the temperature range of -40 to 125°C. The small outline package with dual terminals makes it suitable for space-constrained designs.
MCP3428-E/ST
MCP3428-E/ST by Microchip Technology is a 16-bit ADC with 4 analog input channels. It has a small outline, thin profile package style and operates at temperatures ranging from -40 to 125 °C. This converter is commonly used in automotive applications due to its high temperature grade and low supply current of 0.18 mA.
MCP3008-I/SL
Telcom Semiconductor
Analog to Digital Converters; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 14; Package Code: SOP; Package Shape: RECTANGULAR;
MCP3008-I/SL by Microchip Tech is an 8-channel ADC with 10-bit resolution, 0.0977% linearity error, and 0-5V analog input range. Ideal for industrial applications, it offers a sample rate of 0.2 MHz and operates at temperatures from -40 to 85°C.
MCP3208-BI/SN
ADC, SUCCESSIVE APPROXIMATION; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved