Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
DOWN CONVERTER; Minimum Down Conversion Gain: 14.2 dB; Minimum RF Input Frequency: 400 MHz; LO Tunable: YES; Maximum RF Input Frequency: 2500 MHz; Maximum Noise Figure: 7 dB;
Median Price
-
Lifecycle Status
Suppliers In-Stock
3
In-Stock Inventory
1k+
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
Digiode
Anansix
One Stop Electronics
$1.000
MARBEL Systems
$1.927
Texas Native Microelectronics
$2.215
$2.126
$2.060
$1.949
Kenton Components
$2.658
$2.339
Semicontronic
$4.000
$3.900
$3.880
Qasali Group International
$5.980
$5.562
$5.263
AZTECH Wire
$15.021
Corphita
Assy Fe
RF/Microwave Up/Down Converters MAX2681 attributes and parameters. Explore more RF/Microwave Up/Down Converters devices from Maxim Integrated
Minimum Down Conversion Gain:
Maximum Intermediate Frequency (IF):
Minimum Intermediate Frequency (IF):
JESD-609 Code:
LO Tunable:
Maximum Noise Figure:
Maximum RF Input Frequency:
Minimum RF Input Frequency:
RF or Microwave Device Type:
Terminal Finish:
Maxim Integrated is a leading provider of analog and mixed-signal integrated circuits for a range of industries, including automotive, industrial, communications, consumer, and computing. Founded in 1983 with headquarters in San Jose, California, Maxim has grown to become one of the world’s largest producers of integrated circuits due to its innovative solutions that solve customers’ toughest design challenges. Maxim's broad portfolio includes products such as power management solutions, high-voltage solutions, motor driver solutions, amplifiers and comparators, data converters and interface ICs. For over 35 years, Maxim has continued to push the boundaries of analog integration by providing innovative integrated circuit products that offer the industry’s highest performance and best quality. The company’s commitment to delivering cutting-edge technology enables customers to stay current with changing demands in the market. From automotive check engine lights to fitness trackers worn on the wrist – Maxim enables customers across multiple industries to create groundbreaking products through their advanced IC designs. Maxim Integrated is now officially part of Analog Devices.
President & CEO
Tunc Doluca
Senior VP & CFO
Brian C. White
Senior VP, Technology & Manufacturing Group
Vivek Jain
Fabrication
Fab Initiation
Philippines
Cavite
Wafer Capacity
489,000
USA
Beaverton
312,000
Thailand
Chon Buri
194,000
FDC5614P
MSKSEMI SEMICONDUCTOR
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 2 W; Transistor Element Material: SILICON; Minimum DS Breakdown Voltage: 60 V;
LM107H/883
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Technology: BIPOLAR;
1N4148WS
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Rfe International
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
ULN2803A
Onsemi
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Package Body Material: PLASTIC/EPOXY; Qualification: Not Qualified;
1N4148
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Surface Mount: NO; Config: SINGLE; Peak Reflow Temperature (C): 260; No. of Phases: 1; Diode Element Material: SILICON;
2N7002
Secos
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .3 W; Maximum Drain Current (ID): .115 A; Maximum Drain-Source On Resistance: 7.5 ohm;
IRLML6402TRPBF
Infineon Technologies
IRLML6402TRPBF by Infineon is a P-CHANNEL FET for SWITCHING applications. It features a 20V DS Breakdown Voltage, 22A IDM, and 0.065 ohm RDS(on). With a small outline package and matte tin finish, it operates in temperatures from -55 to 150 °C.
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
Panjit International
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
BSS138
Philips Semiconductors
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Operating Mode: ENHANCEMENT MODE; Maximum Operating Temperature: 150 Cel;
ABS06-32.768KHZ-T
Abracon
Abracon's ABS06-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 90000 ohm series resistance, and -40 to 85 °C operating temperature range. Ideal for applications requiring precise timing in compact designs like IoT devices and wearables.
BAV99
Comchip Technology
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
Texas Instruments
2N2222A by Texas Instruments is a small signal NPN bipolar junction transistor (BJT) with a max collector-emitter voltage of 40V and a max collector current of 0.8A. It is commonly used for switching applications due to its fast turn on/off times (35ns/285ns) and high transition frequency (300MHz).
CL10B104KB8NNNC
Samsung Electro-mechanics
CL10B104KB8NNNC by Samsung Electro-mechanics is a ceramic capacitor with capacitance of 0.1uF and rated DC voltage of 50V. It has a negative tolerance of 10% and temperature coefficient of 15ppm/°C, suitable for surface mount applications in various electronic devices. With dimensions of 1.6mm x 0.8mm x 0.9mm, it operates b/w -55 to 125 °C providing stable performance in compact designs.
MC33269T-3.3G
MC33269T-3.3G by Onsemi is a fixed positive single output LDO regulator with a max output current of 0.8 A and a dropout voltage of 1.35 V. It is commonly used in applications that require stable voltage regulation, such as power supplies for electronic devices.
Taiwan Semiconductor
RECTIFIER DIODE; Surface Mount: NO; Peak Reflow Temperature (C): 260; Maximum Operating Temperature: 175 Cel; JESD-609 Code: e3; No. of Elements: 1;
Vishay Intertechnology
NPN; Configuration: COMPLEX; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Package Body Material: PLASTIC/EPOXY; JESD-30 Code: R-PDIP-T18;
MMBF170LT1G
Rochester Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Package Style (Meter): SMALL OUTLINE; No. of Terminals: 3;
1N4148WT
MAX2680EUT+
Maxim Integrated
DOWN CONVERTER; Maximum Operating Temperature: 85 Cel; JESD-609 Code: e3; Minimum Down Conversion Gain: 5.7 dB; Terminal Finish: MATTE TIN; Maximum Intermediate Frequency (IF): 500 MHz;
HPMX-7123-TR1
Broadcom
DOWN CONVERTER; Terminal Finish: Tin/Lead (Sn/Pb); JESD-609 Code: e0; Minimum Down Conversion Gain: 12.5 dB; Minimum RF Input Frequency: 400 MHz; Maximum RF Input Frequency: 2400 MHz;
MAX2106UCM
DOWN CONVERTER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 48; Package Body Material: PLASTIC/EPOXY; Maximum RF Input Frequency: 2175 MHz; Construction: COMPONENT;
UPB1007K
Renesas Electronics
DOWN CONVERTER; Minimum Operating Temperature: -40 Cel; Minimum Down Conversion Gain: 15.5 dB; Additional Features: HIGH RELIABILITY; Construction: COMPONENT; Maximum Operating Temperature: 85 Cel;
TFF1012HN/N1,135
NXP Semiconductors
TFF1012HN/N1,135 by NXP Semiconductors is an RF/Microwave Up/Down Converter designed for surface mount applications. It operates b/w -40 °C to 85 °C with a 5V power supply and features 16 terminals. Ideal for communication systems, it ensures reliable performance in various environments.
MAX2673EUA+
Analog Devices
Analog Devices' MAX2673EUA+ is an RF up converter with 400-2500 MHz output range, 7.8 dB gain, and 10.4 dB noise figure. Ideal for applications requiring high frequency conversion in RF/Microwave systems with a VSWR of 2.2 and operating temperature range of -40 to 85°C.
MAX2116UGL
DOWN CONVERTER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 40; Package Body Material: CERAMIC; Minimum RF Input Frequency: 925 MHz; Maximum RF Input Frequency: 2175 MHz;
UPC2743GS
RF/Microwave Up/Down Converters; Mounting Feature: SURFACE MOUNT; No. of Terminals: 20; Package Body Material: PLASTIC/EPOXY; Technology: BIPOLAR; Minimum Operating Temperature: -20 Cel;
ADMV4420ACPZ-RL7
Analog Devices' ADMV4420ACPZ-RL7 is a BICMOS RF down converter with 26 dB gain, LO tunability, and 32 terminals. Operating from -40 to 85 °C, it converts RF signals from 16.95 to 22.05 GHz down to a min IF of 900 MHz for applications in RF/Microwave systems requiring high performance surface mount components.
UPC2758T-E3
RF/Microwave Up/Down Converters; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Package Body Material: PLASTIC/EPOXY; Technology: BIPOLAR; Maximum Supply Current: 14.8 mA;
UPC2775GS
RF/Microwave Up/Down Converters; Mounting Feature: SURFACE MOUNT; No. of Terminals: 20; Package Body Material: PLASTIC/EPOXY; Technology: BIPOLAR; Package Equivalence Code: SOP20,.3;
HMC6789BLC5A
Analog Devices' HMC6789BLC5A is a GAAS technology RF down converter with 10 dB min. gain, 37-44 GHz RF input freq., and 0-4 GHz IF range. It operates on 3V power supply, LO tunable, and suitable for RF/Microwave applications in ceramic package.
MAX2673EUA+T
UP CONVERTER; Minimum Up Conversion Gain: 7.8 dB; Maximum Intermediate Frequency (IF): 500 MHz; Minimum Operating Temperature: -40 Cel; JESD-609 Code: e3; Maximum RF Output Frequency: 2500 MHz;
F1152NBGI8
DOWN CONVERTER; Terminal Finish: Matte Tin (Sn); JESD-609 Code: e3;
F1100NBGI8
DOWN CONVERTER; JESD-609 Code: e3; Terminal Finish: Matte Tin (Sn);
UPB1005GS-E1
RF/Microwave Up/Down Converters; Mounting Feature: SURFACE MOUNT; No. of Terminals: 30; Package Body Material: PLASTIC/EPOXY; Technology: BIPOLAR; Package Equivalence Code: SSOP30,.3;
UPC2756T
RF/Microwave Up/Down Converters; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Package Body Material: PLASTIC/EPOXY; Technology: BIPOLAR; Maximum Operating Temperature: 85 Cel;
HMC1113LP5E
HMC1113LP5E by Analog Devices is a RF/Microwave DOWN CONVERTER with 32 terminals, operating at temperatures from -40 to 85 °C. It features a min Down Conversion Gain of 9 dB, Max Noise Figure of 2.5 dB, and operates b/w RF Input Frequencies of 10-16 GHz. Ideal for applications requiring high-performance RF signal conversion in various electronic systems.
F1763NBGI8
DOWN CONVERTER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 20; Package Body Material: PLASTIC/EPOXY; Characteristic Impedance: 50 ohm; Minimum Down Conversion Gain: 10.7 dB;
MAX9993ETP+D
MAX9993ETP+D by Analog Devices is a RF down converter with LO tunable feature. It operates b/w -40 to 85 °C, supports RF input frequencies from 1700 to 2200 MHz, and has a VSWR of 1.5. Ideal for applications requiring a min IF of 50 MHz and an input power of 22 dBm.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
MAX2671EUT-T
UP CONVERTER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Package Body Material: PLASTIC/EPOXY; Technology: BIPOLAR; Power Supplies (V): 3/5;
MAX2671EUT+T
UP CONVERTER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Package Body Material: PLASTIC/EPOXY; Technology: BIPOLAR; Construction: COMPONENT;
MAX2682EUT+T
DOWN CONVERTER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Package Body Material: PLASTIC/EPOXY; Technology: BIPOLAR; Minimum Operating Temperature: -40 Cel;
MAX2682EUT-T
DOWN CONVERTER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Package Body Material: PLASTIC/EPOXY; Technology: BIPOLAR; Construction: COMPONENT;
MAX2660EUT+T
Analog Devices' MAX2660EUT+T is an RF up converter with 400-2500 MHz output range, 3.9 dB gain, and 11.9 dB noise figure. Ideal for applications requiring high-frequency conversion in RF/Microwave systems with impedance of 50 ohm and IF range of 40-500 MHz.
MAX2660EUT-T
MAX2660EUT-T by Maxim Integrated is a RF/Microwave Up/Down Converter with a max RF output frequency of 2500 MHz and a max voltage standing wave ratio of 2.2. It is commonly used in applications such as wireless communication systems and satellite receivers.
UP CONVERTER; Construction: COMPONENT; Maximum Noise Figure: 11.9 dB; Maximum Operating Temperature: 85 Cel; LO Tunable: NO; Minimum Operating Temperature: -40 Cel;
MAX2681EUT+T
DOWN CONVERTER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Package Body Material: PLASTIC/EPOXY; Technology: BIPOLAR; Minimum RF Input Frequency: 400 MHz;
DOWN CONVERTER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Package Body Material: PLASTIC/EPOXY; Technology: BIPOLAR; Power Supplies (V): 3/5;
MAX2681EUT-T
DOWN CONVERTER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Package Body Material: PLASTIC/EPOXY; Technology: BIPOLAR; Minimum Down Conversion Gain: 6.7 dB;
MAX2682EUT+
DOWN CONVERTER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Package Body Material: PLASTIC/EPOXY; Technology: BIPOLAR; JESD-609 Code: e3;
MAX2682EUT
MAX2682EUT by Maxim Integrated is a RF/Microwave DOWN CONVERTER with 1.5 VSWR, 8.7 dB Down Conversion Gain, and 50 ohm Impedance. It operates at -40 to 85°C, consumes 21.8 mA current, and supports RF input frequencies from 400 MHz to 2500 MHz. Ideal for applications requiring high-performance RF signal conversion in compact setups.
MAX2661
UP CONVERTER; Minimum Up Conversion Gain: 11 dB; Minimum Intermediate Frequency (IF): 10 MHz; Maximum RF Output Frequency: 2500 MHz; Terminal Finish: TIN LEAD; Maximum Noise Figure: 8 dB;
MAX2661EUT+T
UP CONVERTER; Maximum Noise Figure: 11.8 dB; Maximum Voltage Standing Wave Ratio: 2.2; Characteristic Impedance: 50 ohm; Maximum RF Output Frequency: 2500 MHz; Maximum Operating Temperature: 85 Cel;
MAX2661EUT+
UP CONVERTER; Terminal Finish: Matte Tin (Sn) - annealed; JESD-609 Code: e3;
MAX2106CCM
DOWN CONVERTER; JESD-609 Code: e0; Minimum RF Input Frequency: 925 MHz; Minimum Operating Temperature: 0 Cel; Maximum RF Input Frequency: 2175 MHz; Terminal Finish: TIN LEAD;
MAX2660
UP CONVERTER; Maximum Intermediate Frequency (IF): 500 MHz; JESD-609 Code: e0; Minimum Up Conversion Gain: 8 dB; LO Tunable: YES; Minimum Intermediate Frequency (IF): 10 MHz;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved