Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
UP CONVERTER; Terminal Finish: Matte Tin (Sn) - annealed; JESD-609 Code: e3;
Median Price
-
Lifecycle Status
Suppliers In-Stock
4
In-Stock Inventory
1k+
Analog Devices Inc
1+ parts
100+ parts
1k+ parts
10k+ parts
Vyrian
Digiode
Anansix
MARBEL Systems
$1.331
Texas Native Microelectronics
$1.530
$1.469
$1.423
$1.346
Kenton Components
$1.836
$1.616
Qasali Group International
$4.131
$3.842
$3.635
Semicontronic
$37.000
$36.075
$35.890
Corphita
RF/Microwave Up/Down Converters MAX2661EUT+ attributes and parameters. Explore more RF/Microwave Up/Down Converters devices from Analog Devices
JESD-609 Code:
RF or Microwave Device Type:
Terminal Finish:
Analog Devices Inc. (ADI) is one of the leading companies in the areas of integrated circuit (IC) design, manufacturing, testing, and marketing. ADI is known for their high-performance semiconductor solutions which enable customers to create innovative systems that solve critical challenges. The company has over 40 years of experience in the industry and has been consistently recognized as an industry leader for its innovation as well as its commitment to quality products and services. They have garnered numerous awards throughout the years including awards from Gartner Magic Quadrant for Industrial IoT Platforms; Frost & Sullivan’s Global Product Leadership Award; and various awards relating to automotive safety technology such as JESD209-3 Automotive Grade Certifications from AEC-Q100.
CEO
Vincent Roche
Interim CFO
James Mollica
CAO
Michael Sondel
Limerick Fab
Fabrication
Fab Initiation
1977
Ireland
Limerick
Wafer Capacity
30,000
Hillview Fab
2001
USA
Milpitas
15,000
Wilmington Fab
1967
Wilmington
50,000
Camas Fab
1997
Camas
18,000
Beaverton-Portland
1987
Beaverton
14,000
PAP-06V-S
J S T Mfg
PAP-06V-S by J S T Mfg is a 6-contact BOARD CONNECTOR with 94V-0 UL Flammability Code. It has FEMALE contacts, CRIMP termination, and comes WITH CABLE ASSEMBLY for CABLE mounting applications.
FDLL4148
National Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
LL4148
Semtech Electronics
261
Deltrol Controls
Other Relays;
EU2B-YS303C
Idec
ROTARY SWITCH;
ULN2803ADWR
Texas Instruments
ULN2803ADWR by Texas Instruments is a peripheral driver with 8 functions, open-collector output characteristics, and built-in transient protections. It operates b/w -40 to 85°C, has a max supply voltage of 3V, and is ideal for buffer or inverter-based applications requiring sink current flow direction.
C1206C104M5RACTU
KEMET Corporation
KEMET C1206C104M5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125°C operating range, and ±20% tolerance. Ideal for surface mount applications in electronics requiring stable capacitance across temperatures.
43025-0400
Molex
The Molex 43025-0400 is a board connector with 4 contacts, 2 rows, and a mating contact pitch of 0.118". It has a body length of 0.27", insulation resistance of 1Gohm, and operates b/w -40 to 105°C. Ideal for commercial applications requiring a female connector with crimp termination and UL94V-0 flammability rating.
1N4148W-7-F
Multicomp Pro
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WS
Onsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Vicor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
SMBJ18CA
Forward International Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Nominal Breakdown Voltage: 21.05 V; Maximum Clamping Voltage: 29.2 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;
LM107H/883C
LM107H/883C by National Semiconductor is a MILITARY-grade Operational Amplifier with +-5/+-15V supplies. Featuring 2000uV max input offset voltage, it operates from -55 to 125 °C. Ideal for applications requiring VOLTAGE-FEEDBACK architecture and frequency compensation.
LM7805CT
LM7805CT by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1.5A. It operates b/w 0-125°C, has a dropout voltage of 2V, and offers excellent line/load regulation for various electronic applications.
BSS138LT3G
BSS138LT3G by Onsemi is a N-CHANNEL FET with a min DS breakdown voltage of 50V. It is used for switching applications and has a max drain current of 0.2A and max drain-source on resistance of 3.5 ohm.
2N2222A
Continental Device India
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Daco Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358M
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
BSS138
Vishay Intertechnology
Vishay Intertechnology's BSS138 is a N-CHANNEL FET with SINGLE configuration and ENHANCEMENT MODE operation. It features 0.35W power dissipation, METAL-OXIDE SEMICONDUCTOR tech, and 150°C max temp. Ideal for surface mount applications in various electronic circuits requiring efficient power management.
2N7002
Weitron Technology
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Terminal Finish: TIN LEAD; Maximum Operating Temperature: 150 Cel;
MAX2411AEEI+T
Analog Devices
Analog Devices' MAX2411AEEI+T is an RF/Microwave Up/Down Converter with 1900 MHz RF output, 2 VSWR, and 6.8 dB up conversion gain. It operates b/w -40 °C to 85°C, has a min down conversion gain of 8.5 dB, and supports a max IF of 450 MHz. Ideal for applications requiring high-frequency signal conversion in various electronic systems.
MAX2681
MAX2681 by Analog Devices is a RF/Microwave DOWN CONVERTER with 14.2 dB Min Gain, 400-2500 MHz RF Input Frequency range, and 10-500 MHz IF. It features LO Tuning capability and 7 dB Noise Figure. Ideal for applications requiring high-performance frequency conversion in RF systems.
UPC8187TB-E3-A
Renesas Electronics
RF/Microwave Up/Down Converters; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Package Body Material: PLASTIC/EPOXY; Technology: BIPOLAR; Minimum Operating Temperature: -40 Cel;
MAX2321EUP+T
Maxim Integrated
DOWN CONVERTER; LO Tunable: YES; Minimum RF Input Frequency: 800 MHz; Minimum Down Conversion Gain: 9.6 dB; Minimum Operating Temperature: -40 Cel; Maximum Operating Temperature: 85 Cel;
CLC5903VLA
DOWN CONVERTER; LO Tunable: NO; Maximum Operating Temperature: 85 Cel; Terminal Finish: TIN LEAD; Minimum Operating Temperature: -40 Cel; Construction: COMPONENT;
HMC621LP4ETR
Analog Devices' HMC621LP4ETR is a 24-terminal RF down converter with a 5V power supply, operating b/w -40 °C to 85°C. With a max supply current of 325mA, it's designed for surface mount applications in RF/Microwave systems.
TA1322FN
Toshiba
DOWN CONVERTER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 30; Package Body Material: PLASTIC/EPOXY; Technology: BIPOLAR; Minimum RF Input Frequency: 850 MHz;
MAX2104CCM+
DOWN CONVERTER; LO Tunable: YES; Minimum Operating Temperature: 0 Cel; Construction: COMPONENT; Characteristic Impedance: 50 ohm; Terminal Finish: Matte Tin (Sn);
ADMV4630BCPZN
UP CONVERTER;
MAX2673
Analog Devices' MAX2673 is an RF up converter with a frequency range of 40-2500 MHz and 12 dB gain. It features a noise figure of 8 dB, LO tunability, and IF range of 10-500 MHz. Ideal for applications requiring high-frequency conversion in RF/microwave systems.
UPC2743GS
RF/Microwave Up/Down Converters; Mounting Feature: SURFACE MOUNT; No. of Terminals: 20; Package Body Material: PLASTIC/EPOXY; Technology: BIPOLAR; Minimum Operating Temperature: -20 Cel;
F1102NBGI8
DOWN CONVERTER; JESD-609 Code: e3; Terminal Finish: Matte Tin (Sn);
HMC904LC5TR
Analog Devices' HMC904LC5TR is a GaAs RF down converter with 32 terminals, operating from -55 °C to 85°C. It requires a 3.5V power supply, drawing a max current of 190mA. Ideal for RF/Microwave applications, it features a ceramic package and gold over nickel terminal finish for surface mount installation.
HMC7585LG
Analog Devices' HMC7585LG is an RF up converter with a frequency range of 81-86 GHz. It features LO tunability and supports IF frequencies up to 2 GHz. Ideal for applications requiring high-frequency conversion in RF/microwave systems.
MAX9993ETP+TD
MAX9993ETP+TD by Analog Devices is an RF down converter with LO tunable feature. It operates b/w -40 to 85 °C, with VSWR of 1.5 and input power of 22 dBm. Ideal for applications requiring RF signal conversion from 1700-2200 MHz to IF range of 50-350 MHz at a characteristic impedance of 50 ohms.
UPC2721GV-E1
RF/Microwave Up/Down Converters; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Body Material: PLASTIC/EPOXY; Technology: BIPOLAR; Terminal Finish: Tin/Lead (Sn/Pb);
MAX2680
MAX2680 by Analog Devices is an RF/Microwave DOWN CONVERTER with 11.6 dB Min Gain, 400-2500 MHz RF Input Frequency range, and 10-500 MHz IF range. It features LO Tuning capability and a Noise Figure of 6.3 dB. Ideal for applications requiring high-performance RF signal conversion in various frequency bands.
UPC2775GS
RF/Microwave Up/Down Converters; Mounting Feature: SURFACE MOUNT; No. of Terminals: 20; Package Body Material: PLASTIC/EPOXY; Technology: BIPOLAR; Package Equivalence Code: SOP20,.3;
F1792NLGI8
DOWN CONVERTER; JESD-609 Code: e3; Terminal Finish: TIN;
ADMV4420ACPZ-RL7
Analog Devices' ADMV4420ACPZ-RL7 is a BICMOS RF down converter with 26 dB gain, LO tunability, and 32 terminals. Operating from -40 to 85 °C, it converts RF signals from 16.95 to 22.05 GHz down to a min IF of 900 MHz for applications in RF/Microwave systems requiring high performance surface mount components.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
ADN4693E-1BCPZ
ADN4693E-1BCPZ by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3.3V nominal voltage. It features a max transmit delay of 2.4ns and differential output for EIA/TIA-899 interface standard applications in industrial settings.
ADMV8420ACPZ
Analog Devices' ADMV8420ACPZ is a 24-terminal BAND PASS FILTER with a Center Frequency of 15500 MHz and Input Impedance of 50Ω. Operating b/w -40°C to 85°C, it's ideal for applications requiring precise filtering in electronic systems.
AD3542RBCPZ16
AD3542RBCPZ16 by Analog Devices is a 16-bit D/A converter with max analog output voltage of 7.5V and linearity error of 0.006103%. It features a nominal settling time of 0.1us, making it ideal for applications requiring precise analog signal generation in temperature-sensitive environments. With a compact square package shape and surface mount capability, this chip carrier is suitable for space-constrained designs where high performance is essential.
ADPA7005CHIP
ADPA7005CHIP by Analog Devices is a wide band medium power RF amplifier with 11.5 dB gain, operating from 20-44 GHz. It can handle up to 27 dBm CW input power and operates in temperatures ranging from -55 °C to 85°C. Ideal for applications requiring high frequency amplification in RF & microwave systems.
ADAQ23876BBCZ
Analog Devices' ADAQ23876BBCZ is a 16-bit ADC with 0.00125% EL, 15 MHz sample rate, and 2'S COMPLEMENT BINARY output. Ideal for wireless data acquisition applications due to its compact GRID ARRAY package and fast 0.063 us conversion time. Operating from -40 to 85 °C, it offers precise analog-to-digital conversion in a small form factor.
AD3542RBCPZ16-RL7
AD3542RBCPZ16-RL7 by Analog Devices is a 16-bit D/A converter with max analog output voltage of 7.5V, 0.006103% linearity error, and 0.1us settling time. Ideal for applications requiring precise analog signal generation in temperature-sensitive environments.
ADMV8420ACPZ-R5
ADMV8420ACPZ-R5 by Analog Devices is a 24-terminal BAND PASS FILTER with a Center Frequency of 15500 MHz and Input Impedance of 50 OHM. It operates b/w -40 to 85 °C and is ideal for applications requiring precise frequency filtering in electronic circuits.
ADPA7005AEHZ-R7
ADPA7005AEHZ-R7 by Analog Devices is a wide band medium power RF amplifier with 12 dB gain, operating from 18-44 GHz. It can handle up to 27 dBm CW input power and operates in temperatures ranging from -40 °C to 85°C. Ideal for applications requiring high frequency amplification in RF & microwave systems.
ADN4693E-1BCPZ-RL7
ADN4693E-1BCPZ-RL7 by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3.3V. It offers a max transmit delay of 2.4ns and max supply current of 24mA. Ideal for applications requiring differential output and EIA/TIA interface standards compliance in tight spaces due to its very thin profile chip carrier package style.
ADPA7005AEHZ
ADPA7005AEHZ by Analog Devices is a wide band medium power RF amplifier with 12 dB gain. It operates b/w 18-44 GHz, handling up to 27 dBm CW input power. Ideal for applications requiring high frequency amplification in temperatures ranging from -40 to 85°C.
MAX2671EUT-T
UP CONVERTER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Package Body Material: PLASTIC/EPOXY; Technology: BIPOLAR; Power Supplies (V): 3/5;
MAX2671EUT+T
UP CONVERTER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Package Body Material: PLASTIC/EPOXY; Technology: BIPOLAR; Construction: COMPONENT;
MAX2682EUT+T
DOWN CONVERTER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Package Body Material: PLASTIC/EPOXY; Technology: BIPOLAR; Minimum Operating Temperature: -40 Cel;
MAX2682EUT-T
DOWN CONVERTER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Package Body Material: PLASTIC/EPOXY; Technology: BIPOLAR; Construction: COMPONENT;
MAX2660EUT+T
Analog Devices' MAX2660EUT+T is an RF up converter with 400-2500 MHz output range, 3.9 dB gain, and 11.9 dB noise figure. Ideal for applications requiring high-frequency conversion in RF/Microwave systems with impedance of 50 ohm and IF range of 40-500 MHz.
MAX2660EUT-T
MAX2660EUT-T by Maxim Integrated is a RF/Microwave Up/Down Converter with a max RF output frequency of 2500 MHz and a max voltage standing wave ratio of 2.2. It is commonly used in applications such as wireless communication systems and satellite receivers.
UP CONVERTER; Construction: COMPONENT; Maximum Noise Figure: 11.9 dB; Maximum Operating Temperature: 85 Cel; LO Tunable: NO; Minimum Operating Temperature: -40 Cel;
MAX2681EUT+T
DOWN CONVERTER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Package Body Material: PLASTIC/EPOXY; Technology: BIPOLAR; Minimum RF Input Frequency: 400 MHz;
DOWN CONVERTER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Package Body Material: PLASTIC/EPOXY; Technology: BIPOLAR; Power Supplies (V): 3/5;
MAX2681EUT-T
DOWN CONVERTER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Package Body Material: PLASTIC/EPOXY; Technology: BIPOLAR; Minimum Down Conversion Gain: 6.7 dB;
MAX2682EUT+
DOWN CONVERTER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Package Body Material: PLASTIC/EPOXY; Technology: BIPOLAR; JESD-609 Code: e3;
MAX2682EUT
MAX2682EUT by Maxim Integrated is a RF/Microwave DOWN CONVERTER with 1.5 VSWR, 8.7 dB Down Conversion Gain, and 50 ohm Impedance. It operates at -40 to 85°C, consumes 21.8 mA current, and supports RF input frequencies from 400 MHz to 2500 MHz. Ideal for applications requiring high-performance RF signal conversion in compact setups.
MAX2661
UP CONVERTER; Minimum Up Conversion Gain: 11 dB; Minimum Intermediate Frequency (IF): 10 MHz; Maximum RF Output Frequency: 2500 MHz; Terminal Finish: TIN LEAD; Maximum Noise Figure: 8 dB;
MAX2661EUT+T
UP CONVERTER; Maximum Noise Figure: 11.8 dB; Maximum Voltage Standing Wave Ratio: 2.2; Characteristic Impedance: 50 ohm; Maximum RF Output Frequency: 2500 MHz; Maximum Operating Temperature: 85 Cel;
MAX2106CCM
DOWN CONVERTER; JESD-609 Code: e0; Minimum RF Input Frequency: 925 MHz; Minimum Operating Temperature: 0 Cel; Maximum RF Input Frequency: 2175 MHz; Terminal Finish: TIN LEAD;
MAX2660
UP CONVERTER; Maximum Intermediate Frequency (IF): 500 MHz; JESD-609 Code: e0; Minimum Up Conversion Gain: 8 dB; LO Tunable: YES; Minimum Intermediate Frequency (IF): 10 MHz;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved