Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Marvell Technology's 88E1111-XX-BAB1I000 is a CMOS Ethernet transceiver with a data rate of 1000 Mbps. Its package style is grid array, low profile, and it has 117 terminals in a rectangular shape. This network interface IC is designed for telecom applications requiring high-speed connectivity.
Median Price
-
Lifecycle Status
Suppliers In-Stock
6
In-Stock Inventory
1k+
Nova Conductors
1+ parts
100+ parts
1k+ parts
10k+ parts
Vyrian
Digiode
VNN
LWI Electronics Inc
NexGen Digital
Corohmni
$8.355
AZTECH Wire
$17.734
Semicontronic
$176.000
$171.600
$170.720
Ampacity Inc.
$980.000
Continental Prestige Electronics
Argo Parts USA
Corphita
A-Z Elektronik GmbH
Bastille Electronics
The use of plastic/epoxy material ensures durability and reliability in various environments.
Allows for easy and secure installation on circuit boards.
Provides a high level of connectivity for complex networking systems.
CMOS technology offers low power consumption and high performance, making it energy-efficient.
Operates at a low voltage, reducing power consumption and heat generation.
Supports high-speed data transfer for efficient network performance.
Network Interfaces 88E1111-XX-BAB1I000 attributes and parameters. Explore more Network Interfaces devices from Marvell Technology
Additional Features:
Data Rate:
JESD-30 Code:
Length:
No. of Functions:
No. of Terminals:
No. of Transceivers:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Qualification:
Maximum Seated Height:
Nominal Supply Voltage:
Surface Mount:
Technology:
Telecom IC Type:
Terminal Form:
Terminal Pitch:
Terminal Position:
Width:
88E1111-XX-BAB1I000 Telecommunications trade compliance attributes, and parameters.
HTS
8542.39.00.01
SB
8542.39.00.00
Marvell Technology is a leading fabless chipmaker focused on networking and storage applications. Marvell serves the data center, carrier, enterprise, automotive, and consumer end markets with processors, optical interconnections, application-specific integrated circuits (ASICs), and merchant silicon for Ethernet applications. The firm is an active acquirer, with five large acquisitions since 2017 helping it pivot out of legacy consumer applications to focus on the cloud and 5G markets.
FDV304P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Moisture Sensitivity Level (MSL): 1; Maximum Drain Current (ID): .46 A;
LM2931AZ-5.0RPG
Onsemi
LM2931AZ-5.0RPG by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V nominal output voltage and 0.1A max output current. It features a low dropout voltage of 0.6V, making it suitable for applications requiring stable power supply in temperature range from -40 to 125°C. The package style is cylindrical with matte tin terminal finish, ideal for various electronic devices needing precise voltage regulation.
BSS123NH6327XTSA1
Infineon Technologies
Infineon BSS123NH6327XTSA1 is a N-CHANNEL FET with 100V DS breakdown voltage, 0.19A ID, and 6 ohm RDS(on). Ideal for small outline applications requiring high drain current and low on-resistance. AEC-Q101 compliant for automotive use.
LM317T
Comset Semiconductors
Other Regulators; No. of Terminals: 3; Terminal Pitch: 2.54 mm; Minimum Output Voltage-1: 1.2 V; Technology: BIPOLAR; Operating Temperature (TJ-Max): 125 Cel;
MMBT3906LT1G
MMBT3906LT1G by Onsemi is a PNP BJT with VCEsat of 0.4V, hFE of 30, and fT of 250MHz. Ideal for small signal applications in electronics due to its low power dissipation, high transition frequency, and compact SOT-23 package. Suitable for use in temperature-sensitive environments with an operating range from -65°C to 150°C.
DS18B20Z+
Maxim Integrated
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Body Width: 3.9 inch; Maximum Supply Voltage: 5.5 V;
2N2222A
Crystalonics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LM7805CT
Texas Instruments
LM7805CT by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1.5A. It operates b/w 0-125°C, has a dropout voltage of 2V, and offers excellent line/load regulation for various electronic applications.
KSZ9031RNXIA
Microchip Technology
KSZ9031RNXIA by Microchip is a 48-terminal Ethernet transceiver with data rate of 1000 Mbps. Operating temperature range from -40 to 85°C makes it suitable for industrial applications. This square-shaped chip carrier has a very thin profile and matte tin finish, ideal for network interfaces.
Cobham Plc
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Minimum DC Current Gain (hFE): 100; Maximum Turn Off Time (toff): 300 ns;
1N4148
Semiconductors
RECTIFIER DIODE; Surface Mount: NO; Maximum Repetitive Peak Reverse Voltage: 100 V; Config: SINGLE; No. of Phases: 1; No. of Elements: 1;
2N7002-7-F
Diodes Incorporated
Diodes Inc. 2N7002-7-F is a N-channel FET with 60V DS breakdown voltage, 0.115A max drain current, and 13.5 ohm RDS(on). Ideal for switching applications in enhancement mode operation. Features Gull Wing terminals, small outline package style, and operates up to 150°C.
LM317LMX/NOPB
LM317LMX/NOPB by Texas Instruments is an adjustable positive single output standard regulator with a max input-output voltage differential of 40V. It operates in temperatures ranging from -40°C to 125°C and has a max output current of 0.1A, making it suitable for various applications requiring precise voltage regulation.
1N4148WT
Surge Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358N
Silicon Group
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
1N4148 by Texas Instruments is a rectifier diode with max reverse recovery time of 0.004 us and max forward voltage of 1V. Ideal for applications requiring low reverse current such as signal demodulation circuits. Operates at max temp of 200°C, making it suitable for high-temperature environments.
LM555CN
Harris Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
LM358AN
STMicroelectronics
2N7002
Sipex
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Peak Reflow Temperature (C): 240; Terminal Finish: TIN LEAD;
LL4148
Formosa Microsemi
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
MCP2551-I/SNVAO
MCP2551-I/SNVAO by Microchip Tech is a CAN transceiver with 1Mbps data rate, 5V supply voltage, and 75mA max supply current. Ideal for industrial applications, it operates b/w -40 to 85°C and features AEC-Q100 screening level for automotive use.
KSZ9131RNXI
The Microchip Technology KSZ9131RNXI is an Ethernet transceiver with a data rate of 1000 Mbps. It operates in industrial temperature range from -40 to 85°C and has a supply voltage of 1.2V. This network interface chip comes in a square chip carrier package with 48 terminals, suitable for surface mount applications.
TJA1042T/3,112
NXP Semiconductors
NXP Semiconductors' TJA1042T/3,112 is an AEC-Q100 compliant network interface with 8 terminals and 5V supply voltage. It operates at data rates up to 1 Mbps, suitable for automotive applications due to its wide temperature range (-40 to 125°C) and small outline package style.
88E1510-A0-NNB2C000
Marvell Technology
Marvell Technology's 88E1510-A0-NNB2C000 is a square-shaped network interface chip carrier with 48 terminals. It operates as an Ethernet transceiver at a nominal voltage of 3.3V, suitable for telecom applications requiring surface mount technology and tin terminal finish.
DP83825IRMQT
Texas Instruments DP83825IRMQT is an Ethernet transceiver with a data rate of 100Gbps. It operates in industrial temperature range (-40 to 85°C) and requires a nominal voltage of 3.3V. The chip carrier package style with 24 terminals makes it suitable for network interfaces in various applications.
DP83848VYB/NOPB
DP83848VYB/NOPB by Texas Instruments is a 3.3V Ethernet transceiver with 100000 Mbps data rate. It operates b/w -40 to 105 °C, in industrial settings. This quad-terminal IC has a compact square package and is ideal for network interfaces requiring high-speed connectivity.
TJA1043T,118
NXP Semiconductors' TJA1043T,118 is a CAN transceiver with 5V nominal voltage and 1Mbps data rate. It features 14 terminals in a small outline package for automotive applications. AEC-Q100 screening level ensures reliability in harsh environments.
TJA1044GTJ
NXP Semiconductors' TJA1044GTJ is a network interface IC with 8 terminals, AEC-Q100 screening, and 5V nominal voltage. It features gull wing terminal form, small outline package style, and dual terminal position. Ideal for automotive applications requiring reliable interface circuitry in compact designs.
TCAN334GDR
TCAN334GDR by Texas Instruments is an 8-terminal interface circuit with a data rate of 5 Mbps. Operating in automotive-grade temperature range (-40 to 125°C), it has a supply voltage of 3.3V and nickel palladium gold terminal finish. Ideal for network interfaces, this small outline package IC is surface mountable and suitable for various telecom applications.
TJF1052IT/5Y
ETHERNET TRANSCEIVER; Terminal Finish: NICKEL PALLADIUM GOLD SILVER; Maximum Time At Peak Reflow Temperature (s): 30; JESD-609 Code: e4; Peak Reflow Temperature (C): 260; Moisture Sensitivity Level (MSL): 3;
SN65HVD232DR
SN65HVD232DR by Texas Instruments is a BICMOS technology interface circuit with 1Mbps data rate, ideal for industrial applications. It operates at 3.3V, has 8 terminals in a small outline package, and can withstand temperatures from -40 to 85°C. Perfect for network interfaces requiring low supply current and high reliability.
MCP2561T-E/SNVAO
MCP2561T-E/SNVAO by Microchip is an AEC-Q100, TS 16949 certified CAN transceiver with 1Mbps data rate. Operating at -40 to 125°C, it has a supply voltage of 5V and consumes max. 70mA current. Ideal for automotive applications due to its small outline package and dual terminal position.
LAN9303-ABZJ
Standard Microsystems
ETHERNET TRANSCEIVER; Temperature Grade: COMMERCIAL; Terminal Form: NO LEAD; No. of Terminals: 56; Package Code: HVQCCN; Package Shape: SQUARE;
TJA1040T/N1,118
NXP Semiconductors' TJA1040T/N1,118 is a CMOS interface circuit with 8 terminals and 5V supply voltage. It operates at 1Mbps data rate, suitable for network interfaces in various applications. The small outline package measures 3.9mm x 4.9mm with a terminal pitch of 1.27mm, making it ideal for compact designs requiring low power consumption.
KSZ8081RNACATR
Micrel
Micrel's KSZ8081RNACATR is a 3.3V Ethernet transceiver with 100Mbps data rate, ideal for network interfaces. It features a square surface mount package style with 24 terminals and operates b/w 0-70°C, making it suitable for commercial applications.
TCAN332GDR
TCAN332GDR by Texas Instruments is an 8-terminal interface circuit with a data rate of 5 Mbps. Operating temperature ranges from -40 to 125°C, suitable for automotive applications. It features a small outline package style and nickel palladium gold terminal finish, making it ideal for network interfaces in compact designs.
TLE9251VLEXUMA1
TLE9251VLEXUMA1 by Infineon is an AEC-Q100 compliant interface circuit with 8 terminals, 5V supply voltage, and 0.65mm terminal pitch. It is designed for automotive applications requiring a small outline package with heat sink, suitable for surface mount assembly. The IC's compact size of 3x3mm and low seated height of 1.1mm make it ideal for space-constrained environments in vehicles.
MAX3057ASA
MAX3057ASA by Maxim Integrated is a small outline network interface IC with 8 terminals, operating at 5V. With a data rate of 2 Mbps, it's ideal for automotive applications due to its BICMOS technology and dual terminal position. The IC has a temperature range from -40°C to 125°C and low supply current of 0.072 mA.
TJA1044GT/1Z
INTERFACE CIRCUIT; Peak Reflow Temperature (C): 260; Moisture Sensitivity Level (MSL): 1;
KSZ8863RLLI
LAN SWITCHING CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 48; Package Code: LFQFP; Package Shape: SQUARE;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
88E1512-A0-NNP2I000
Marvell's 88E1512-A0-NNP2I000 is a square-shaped, surface-mount Ethernet transceiver with 56 terminals. Operating at 1000 Mbps with a nominal voltage of 3.3 V, it is ideal for high-speed network interfaces in various telecom applications.
88E1512-A0-NNP2C000
Marvell's 88E1512-A0-NNP2C000 is a square-shaped chip carrier with 56 terminals, designed for Ethernet transceiver applications. Operating at 3.3V, it supports data rates up to 1000 Mbps. This surface-mount device is ideal for network interfaces requiring high-speed connectivity in various electronic systems.
88E1111-B2-BAB1I000
Marvell's 88E1111-B2-BAB1I000 is a CMOS Ethernet transceiver with 117 terminals in a low-profile grid array package. It operates at 1V, measures 10mm wide by 14mm long, and has a terminal pitch of 1mm. Ideal for network interfaces requiring compact design and surface mount capability.
88E1111-B2-BAB2I000
Marvell Technology's 88E1111-B2-BAB2I000 is a CMOS Ethernet transceiver with 117 terminals in a low-profile grid array package. It operates at a nominal voltage of 1V and has a compact size of 10mm width and 14mm length. Ideal for network interfaces, this surface-mount device is designed for telecom applications.
88E1512-PB2-NNP2I000
Marvell Technology's 88E1512-PB2-NNP2I000 is a network interface chip carrier with a very thin profile. It operates at temperatures ranging from -40 to 85 °C and has a data rate of 1000 Mbps. This Ethernet transceiver is commonly used in industrial applications.
88E1111-B2-BAB1C000
Marvell's 88E1111-B2-BAB1C000 is a CMOS Ethernet transceiver with 117 terminals in a low-profile grid array package. It operates at a nominal voltage of 1V and has a terminal pitch of 1mm. Ideal for network interfaces, this component is designed for surface mount applications with dimensions of 10mm x 14mm.
88E1116R-A0-NNC1C000
Marvell Technology's 88E1116R-A0-NNC1C000 is a CMOS Ethernet transceiver with a data rate of 1000 Mbps. It features a square chip carrier package style, matte tin terminal finish, and quad terminal position. Ideal for network interfaces in telecommunications applications.
88E1510-A0-NNB2I000
Marvell Technology's 88E1510-A0-NNB2I000 is a network interface IC with 48 terminals in a square chip carrier package. It operates at a nominal voltage of 3.3V and serves as an Ethernet transceiver, suitable for telecom applications.
88E1512PB2-NNP2C000
Marvell's 88E1512PB2-NNP2C000 is a CMOS Ethernet transceiver with 56 terminals in a square chip carrier package. Operating b/w 0-70°C, it has a low profile of 1mm and requires 1.8V supply voltage. Ideal for network interfaces, this component suits telecom applications due to its compact size and surface-mount capability.
88E1512-XX-NNP2I000
Marvell's 88E1512-XX-NNP2I000 is a square-shaped Ethernet transceiver chip carrier with 56 terminals. It operates at a nominal voltage of 3.3V and is designed for network interfaces, suitable for surface mount applications in telecom equipment.
88E1518-A0-NNB2C000
Marvell's 88E1518-A0-NNB2C000 is a square-shaped Ethernet transceiver with 48 terminals, designed for surface mount applications. It operates at a nominal voltage of 3.3V and features tin terminal finish. Ideal for network interfaces requiring high-speed data transmission in various electronic devices.
88E1111-B2-NDC2I000
Marvell's 88E1111-B2-NDC2I000 is a CMOS Ethernet transceiver with 96 terminals in a square chip carrier package. It has a terminal pitch of 0.6mm and operates at a nominal voltage of 1V. Ideal for network interfaces, this surface-mount device measures 9x9mm with a max seated height of 0.85mm.
88E1111-B2-RCJ1C000
Marvell's 88E1111-B2-RCJ1C000 is a CMOS Ethernet transceiver with 128 terminals in a flatpack, fine pitch style. It operates at a nominal voltage of 1V and has matte tin terminal finish. Ideal for network interfaces, this compact device measures 14mm x 20mm with a seated height of 3.4mm.
88E1111-B2-NDC2C000
Marvell's 88E1111-B2-NDC2C000 is a CMOS Ethernet transceiver with 96 terminals in a square chip carrier package. It operates at a nominal voltage of 1V and has a terminal pitch of 0.6mm. Ideal for network interfaces, this surface-mount device measures 9x9mm and has a max seated height of 0.85mm.
88E1111-B2-BAB2C000
ETHERNET TRANSCEIVER; Terminal Form: BALL; No. of Terminals: 117; Package Code: LBGA; Package Shape: RECTANGULAR; No. of Functions: 1;
88E1548PA0-BAM2I000
ETHERNET TRANSCEIVER; Terminal Form: BALL; No. of Terminals: 196; Package Code: LBGA; Package Shape: SQUARE; No. of Transceivers: 1;
88E1514-A0-NNP2C000
88E1111-B2-CAA1I000
ETHERNET TRANSCEIVER; Terminal Form: BUTT; No. of Terminals: 96; Package Code: BCC; Package Shape: SQUARE; Package Body Material: UNSPECIFIED;
88E1111-XX-BAB-C000
ETHERNET TRANSCEIVER; Terminal Form: BALL; No. of Terminals: 117; Package Code: LBGA; Package Shape: RECTANGULAR; Package Style (Meter): GRID ARRAY, LOW PROFILE;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved