Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SILICON SURGE PROTECTOR; Package Style (Meter): CHIP CARRIER; Surface Mount: YES; Terminal Position: QUAD; Configuration: COMPLEX; Qualification: Not Qualified;
Median Price
-
Lifecycle Status
Suppliers In-Stock
0
In-Stock Inventory
< 1k
Supply Digital
1+ parts
100+ parts
1k+ parts
10k+ parts
Silicon Surge Protectors SP720MM attributes and parameters. Explore more Silicon Surge Protectors devices from Littelfuse
Configuration:
JESD-30 Code:
No. of Elements:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Shape:
Package Style (Meter):
Qualification:
Surface Mount:
Terminal Form:
Terminal Position:
Trigger Device Type:
SP720MM Triggering Devices trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8541.30.00.80
SB
Littelfuse is a diversified industrial technology manufacturing company empowering a sustainable, connected, and safer world. Across more than 20 countries, and with approximately 18,000 global associates, we partner with customers to design and deliver innovative, reliable solutions. Serving over 100,000 end customers, our products are found in a variety of industrial, transportation, and electronics end markets—everywhere, every day. Headquartered in Chicago, Illinois, United States, Littelfuse was founded in 1927.
M39029/58-360
Conesys
CONNECTOR ACCESSORY; MIL Conformity: YES; Mating Contacts: M39029/57-354; Terminal Type: CRIMP; DIN Conformity: NO; MIL-Connector Accessory Name: CONTACT;
LM358N
Samsung
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
SS14
Hy Electronic
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM555CMX
Texas Instruments
LM555CMX by Texas Instruments is an Analog Waveform Generation IC with 8 terminals. It operates at a nominal voltage of 5V and supports power supplies ranging from 5V to 15V. This versatile IC, housed in a small outline package, is commonly used for pulse and rectangular waveform generation in commercial temperature environments.
OPA2277UA/2K5
Burr-Brown Corporation
OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
BAV99
Micro Commercial Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
NE555DR
NE555DR by Texas Instruments is an Analog Waveform Generation IC with 8 terminals, operating voltage of 5V, and power supplies ranging from 5-15V. It is a versatile component for pulse generation applications due to its small outline package and commercial temperature grade suitability.
1N4148
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
ISO1050DUBR
ISO1050DUBR by Texas Instruments is a network interface IC with 8 terminals, operating from -55 to 105°C. It features a small outline package, nickel palladium gold finish, and gull wing terminal form. Ideal for telecom applications requiring a 5V supply voltage and peak reflow temperature of 260°C.
2N2222A
Hi-tron Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Philips Semiconductors
LM358AN
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
1N4148W-T
Rectron
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
MBR0520LT1
Onsemi
MBR0520LT1 by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, making it suitable for applications requiring low power consumption in compact electronic devices. This single-configured diode is surface mountable and has a max repetitive peak reverse voltage of 20V, ideal for small outline package designs.
Kec
1N4148WT
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Yangzhou Yangjie Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; No. of Elements: 1; Terminal Form: GULL WING; Maximum Drain Current (ID): .34 A;
LL4148
Rfe International
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
SMBJ18CA
Leshan Radio
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
9EL2
The Texas Instruments 9EL2 is a single silicon surge protector with a non-repetitive peak on-state current of 10A. It features a min breakdown voltage of 265V and max breakdown voltage of 400V, making it ideal for protecting electronic devices from power surges. This surface-mount device has a ceramic and metal-sealed co-fired package body, suitable for applications requiring reliable surge protection in compact spaces.
TISP4080H3BJR
TISP4080H3BJR by Texas Instruments is a single silicon surge protector with 60A peak current, 65V DC voltage, and 80V breakdown voltage. It is a thyristor surge protector used in applications requiring protection against electrical surges.
TISP4040H1BJ
TISP4040H1BJ by Texas Instruments is a single silicon surge protector with 50A non-repetitive peak on-state current and 40V max breakdown voltage. It is used for protecting electronic circuits from voltage surges, featuring a plastic/epoxy package body material and surface mount capability.
TPA120A-12
STMicroelectronics
STMicroelectronics TPA120A-12 is a single silicon surge protector with 30A non-repetitive peak on-state current. It has a max breakdown voltage of 160V, making it ideal for protecting electronic devices from power surges. The package shape is round with wire terminals, suitable for applications requiring isolated case connection.
TISP4250M3BJ
TISP4250M3BJ by Texas Instruments is a single silicon surge protector with 32A peak current, 190V DC voltage, and 150°C max temp. Ideal for protecting circuits from surges in applications like power supplies and telecommunications due to its thyristor surge protection design.
SZHBL5006P2T5G
SILICON SURGE PROTECTOR; Terminal Finish: MATTE TIN; Peak Reflow Temperature (C): 260; JESD-609 Code: e3; Moisture Sensitivity Level (MSL): 1; Maximum Time At Peak Reflow Temperature (s): 30;
FLC01-200B
FLC01-200B by STMicroelectronics is a silicon surge protector designed for surface mount applications. It features a min breakdown voltage of 206 V, max operating temp of 150 °C, and a built-in diode and resistor configuration. Ideal for protecting sensitive electronics from voltage spikes.
TISP4200M3BJR
TISP4200M3BJR by Texas Instruments is a single silicon surge protector with 32A peak current, 155V DC voltage, and 150°C max temp. Ideal for protecting electronic circuits from voltage spikes in applications like telecommunications equipment and industrial controls.
TISP4150F3LMFR
TISP4150F3LMFR by Texas Instruments is a single silicon surge protector with a non-repetitive peak on-state current of 4A. It has a max DC off-state voltage of 120V and operates b/w -40°C to 150°C. Ideal for protecting electronic circuits from voltage surges in various applications.
TISP4165H4BJ
TISP4165H4BJ by Texas Instruments is a single silicon surge protector with 60A non-repetitive peak on-state current. It features a plastic/epoxy package body, rectangular shape, and C bend terminal form. Ideal for protecting electronic devices from voltage surges in various applications.
TISP4265H4BJR
TISP4265H4BJR by Texas Instruments is a single silicon surge protector with 60A non-repetitive peak on-state current. It has a max breakdown voltage of 265V and trigger device type as thyristor surge protector. Ideal for protecting electronic devices from voltage surges in various applications.
TISP4290H3LMFR
TISP4290H3LMFR by Texas Instruments is a single silicon surge protector with 60A peak current, 220V DC voltage, and 150°C max temp. Ideal for protecting circuits from surges in applications like power supplies and telecommunications due to its thyristor surge protection design.
P4500Q22CLRP
Littelfuse
The Littelfuse P4500Q22CLRP is a silicon surge protector with a max breakdown voltage of 530V. It operates b/w -40°C to 150°C, meeting IEC-61000-4-5, MIL-STD-750, and UL standards. This single configuration chip carrier is ideal for surface mount applications requiring protection against transient overvoltages.
TPA130
STMicroelectronics' TPA130 is a single silicon surge protector with 16A non-repetitive peak current and 130V repetitive peak reverse voltage. It is used for surge protection in applications requiring isolated case connection, with operating temperatures ranging from -55 °C to 150°C.
SMP100LC-90
SMP100LC-90 by STMicroelectronics is a single silicon surge protector designed for surface mount applications. It features a non-repetitive peak on-state current of 24 A, a repetitive peak reverse voltage of 90 V, and operates b/w -55 °C to 150°C. Ideal for protecting sensitive electronics from voltage spikes.
TISP2072F3D
TISP2072F3D by Texas Instruments is a Silicon Surge Protector with 4A Non Repetitive Peak On-state Current, 58V Max DC Off-state Voltage, and 72V Max Breakdown Voltage. It is used for surge protection in various applications due to its Delta Connected configuration and UL Recognized reference standard.
TISP4350H3LMR
TISP4350H3LMR by Texas Instruments is a single silicon surge protector with a non-repetitive peak on-state current of 60A. It operates b/w -40°C to 150°C, with a max DC off-state voltage of 275V. Ideal for protecting electronic devices from power surges in various applications.
SMTPA270
SMTPA270 by STMicroelectronics is a silicon surge protector with 16A non-repetitive peak on-state current and 270V repetitive peak reverse voltage. It is used for surge protection in applications requiring a trigger device with a max operating temperature of 150 °C.
TISP5080H3BJR
TISP5080H3BJR by Texas Instruments is a single silicon surge protector with 60A non-repetitive peak on-state current. It features a plastic/epoxy package body, C bend terminal form, and operates b/w -40°C to 150°C. Ideal for applications requiring protection against voltage surges like power supplies and telecommunications equipment.
P3100SB
Teccor Electronics
THYRISTOR SURGE PROTECTOR; Package Style (Meter): SMALL OUTLINE; Surface Mount: YES; Terminal Position: DUAL; Configuration: SINGLE; JESD-609 Code: e0;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
SP724AHTG
SP724AHTG by Littelfuse is a Silicon Surge Protector with 8 elements, max leakage current of 0.00001 mA, and trigger device type. Its package shape is rectangular, surface mountable, and has dual terminal position. Ideal for protecting electronic devices from voltage spikes in various applications.
SP720ABG
SILICON SURGE PROTECTOR; Package Style (Meter): SMALL OUTLINE; Surface Mount: YES; Terminal Position: DUAL; Configuration: COMPLEX; Terminal Form: GULL WING;
SP721ABTG
SILICON SURGE PROTECTOR; Package Style (Meter): SMALL OUTLINE; Surface Mount: YES; Terminal Position: DUAL; Configuration: COMPLEX; JESD-609 Code: e3;
SP723ABTG
SP723ABTG by Littelfuse is a silicon surge protector with 6 elements and 8 terminals. It has a max operating temperature of 105°C and min of -40°C, making it suitable for protecting electronic devices from power surges in various applications. With a complex configuration and gull wing terminal form, this surface-mount device is ideal for use in compact spaces requiring reliable surge protection.
SP723AP
SILICON SURGE PROTECTOR; Package Style (Meter): IN-LINE; Surface Mount: NO; Terminal Position: DUAL; Configuration: COMPLEX; Package Body Material: PLASTIC/EPOXY;
Harris Semiconductor
SILICON SURGE PROTECTOR; Package Style (Meter): IN-LINE; Surface Mount: NO; Terminal Position: DUAL; Configuration: COMPLEX; Terminal Finish: Tin/Lead (Sn/Pb);
SP721ABG
SP720APP
SP725ABG
SILICON SURGE PROTECTOR; Package Style (Meter): SMALL OUTLINE; Surface Mount: YES; Terminal Position: DUAL; Configuration: SINGLE; Minimum Operating Temperature: -40 Cel;
SP725ABTG
SP725ABTG by Littelfuse is a single silicon surge protector with 14A non-repetitive peak on-state current. It has a plastic/epoxy body, gull wing terminals, and operates b/w -40 to 105°C. Ideal for surface mount applications requiring protection against voltage surges.
SP723AB
SILICON SURGE PROTECTOR; Package Style (Meter): SMALL OUTLINE; Surface Mount: YES; Terminal Position: DUAL; Configuration: COMPLEX; No. of Elements: 6;
SP721APP
SILICON SURGE PROTECTOR; Package Style (Meter): IN-LINE; Surface Mount: NO; Terminal Position: DUAL; Configuration: COMPLEX; JEDEC-95 Code: MS-001BA;
SP720MD-8
SILICON SURGE PROTECTOR; Package Style (Meter): IN-LINE; Surface Mount: NO; Terminal Position: DUAL; Configuration: COMPLEX; Maximum Operating Temperature: 125 Cel;
SP720ABTG
SILICON SURGE PROTECTOR; Package Style (Meter): SMALL OUTLINE; Surface Mount: YES; Terminal Position: DUAL; Configuration: COMPLEX; JEDEC-95 Code: MS-012AC;
SP723ABG
SILICON SURGE PROTECTOR; Package Style (Meter): SMALL OUTLINE; Surface Mount: YES; Terminal Position: DUAL; Configuration: COMPLEX; Package Body Material: PLASTIC/EPOXY;
SP723ABT
SP720MM-8
SILICON SURGE PROTECTOR; Package Style (Meter): CHIP CARRIER; Surface Mount: YES; Terminal Position: QUAD; Configuration: COMPLEX; Package Body Material: CERAMIC, METAL-SEALED COFIRED;
SP720AP
SILICON SURGE PROTECTOR; Package Style (Meter): IN-LINE; Surface Mount: NO; Terminal Position: DUAL; Configuration: COMPLEX; Qualification: Not Qualified;
SP721AB
SILICON SURGE PROTECTOR; Package Style (Meter): SMALL OUTLINE; Surface Mount: YES; Terminal Position: DUAL; Configuration: COMPLEX; JEDEC-95 Code: MS-012AA;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved