Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated DC Voltage: 1500 V; Rated Current: 100 A; Terminal Shape: TAB/BLADE; Body Width: 51.5 inch;
Median Price
-
Lifecycle Status
Suppliers In-Stock
1
In-Stock Inventory
1k+
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
AZTECH Wire
$10.330
Neutron USA
$639.990
Authorized Procurement Solutions
Fuses PSX1XLDB0100X attributes and parameters. Explore more Fuses devices from Littelfuse
Circuit Protection Type:
Rated Current:
Rated Breaking Capacity:
Rated DC Voltage:
Body Diameter:
Body Height:
Body Width:
Blow Characteristic:
Built-in Features:
Nominal Joule Integral:
Minimum Operating Temperature:
Maximum Operating Temperature:
Reference Standard:
Terminal Shape:
Mounting Feature:
Packing Method:
PSX1XLDB0100X Circuit Protection trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
Littelfuse is a diversified industrial technology manufacturing company empowering a sustainable, connected, and safer world. Across more than 20 countries, and with approximately 18,000 global associates, we partner with customers to design and deliver innovative, reliable solutions. Serving over 100,000 end customers, our products are found in a variety of industrial, transportation, and electronics end markets—everywhere, every day. Headquartered in Chicago, Illinois, United States, Littelfuse was founded in 1927.
M24308/2-1F
Esterline Technologies
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mounting Option-1: HOLE .115-.125; Mounting Type: CABLE AND PANEL; Mating Contact Finish: NOT SPECIFIED;
SMBJ18CA
Onsemi
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WT
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Good-ark Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V; Maximum Time At Peak Reflow Temperature (s): 10; JESD-609 Code: e3;
LM358N
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
M39029/56-351
Carlisle Interconnect Technologies
CONNECTOR ACCESSORY; MIL Conformity: YES; Contact Type: CRIMP; Removal Tools: M81969/8-06, M81969/14-02; IEC Conformity: NO; Contact Gender: FEMALE;
1N4148WS
Sensitron Semiconductor
C1206C104K5RACTU
KEMET Corporation
KEMET C1206C104K5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications due to its rectangular package shape and wraparound terminals.
LL4148
Goodwork Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
2N2222A
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; No. of Terminals: 3;
MBR0520LT1G
MBR0520LT1G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, has a peak reflow temperature of 260°C, and a repetitive peak reverse voltage of 20V. This diode is ideal for applications requiring high-speed switching in compact electronic devices.
LM358D-T
Philips Semiconductors
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
New England Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Motorola
Surge Components
Shenzhen Socay Electronics
SS14
Forward International Electronics
RECTIFIER DIODE; Surface Mount: YES; Maximum Operating Temperature: 150 Cel; No. of Elements: 1; No. of Phases: 1; Maximum Output Current: 1 A;
Diodes Incorporated
1N4148
Vishay Intertechnology
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
BSS123LT1G
BSS123LT1G by Onsemi is a N-CHANNEL FET with 100V DS breakdown voltage, 0.17A drain current, and 6 ohm on resistance. Ideal for switching applications, it operates in enhancement mode with a max power dissipation of 0.225W. It comes in a small outline package with gull wing terminals and can withstand temperatures from -55 to 150°C.
0313025.HXP
Littelfuse
Littelfuse 0313025.HXP fuse, rated 25A and 32V, features time lag blow characteristic. With dimensions of 6.35mm x 31.75mm, it's ideal for electric circuit protection in applications requiring a rated breaking capacity of 300A and pre-arcing rating of 16500 A2/s.
36916300440
Littelfuse 36916300440 fuse has a rated current of 6.3A and nominal joule integral of 160.74J, suitable for electric fuse circuit protection at 300V AC/DC. With a time lag blow characteristic and trip time of 20s, it is ideal for applications requiring reliable overcurrent protection in various industries.
FNQ-R-5
Eaton Corporation
Eaton Corporation's FNQ-R-5 fuse, rated at 5A and 600V, features a time delay blow characteristic. With a body size of 10.3mm x 38.1mm, it is suitable for circuit protection in various applications requiring a high breaking capacity of 200kA. The fuse is designed with nickel-finished end caps for use in inline/holder mounting configurations according to CE, CSA, and UL standards.
LP-CC-10
Cooper Industries
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 150 V; Rated Current: 10 A; Terminal Shape: END CAP;
DMM-B-44/100-R
The Eaton Corporation DMM-B-44/100-R fuse is rated for 1000V AC/DC with a 0.44A current. Featuring fast blow characteristic and nickel terminal finish, it has a breaking capacity of 10kA. Ideal for electric circuit protection in UL-standard applications, its dimensions are 10mm x 34.9mm for inline mounting.
35421000029
Littelfuse 35421000029 fuse has a rated current of 10A, nominal joule integral of 500J, and rated AC voltage of 440V. It is used for circuit protection in applications requiring very fast blow characteristic and inline/holder mounting feature.
FNQ-R-1-1/8
Eaton Corporation's FNQ-R-1-1/8 fuse, rated at 1.125A and 600V, features a time delay blow characteristic. With a body length of 10.3mm and diameter of 38.1mm, it is ideal for circuit protection in applications requiring inline mounting or holder installation. Compliant with CE, CSA, and UL standards, this CC-class fuse has a high breaking capacity of 200000A.
DFJ-175
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 450 V; Rated Current: 175 A; Terminal Shape: TAB/BLADE;
AGC-2-R
ELECTRIC FUSE; Rated Current: 2 A; Terminal Shape: END CAP; Dimensions: 31.75mm x 31.75mm; Rated Voltage: 250 V; Reference Standard: CSA; UL;
FNQ-R-12
Eaton Corporation's FNQ-R-12 fuse, rated at 12A and 600V AC/300V DC, features a time delay blow characteristic. With a body size of 10.3mm x 38.1mm and CC class, it is commonly used for circuit protection in various applications requiring a high breaking capacity of 200kA.
63LET
The Eaton Corporation 63LET fuse, with a rated current of 63A and rated breaking capacity of 200kA, is ideal for circuit protection in applications requiring a nominal joule integral of 180J. With dimensions of 17.7mm x 26.2mm and mounting options like INLINE/HOLDER, it offers reliable protection at AC voltage up to 240V and DC voltage up to 150V.
FNQ-R-4-1/2
Cooper Electronic Technologies
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated Current: 4.5 A; Terminal Shape: END CAP; Manufacturer Series: FNQ-R;
3413.0114.22
Schurter Ag
Schurter Ag's 3413.0114.22 fuse is a 1206 size with 0.75A rated current and 32V AC voltage, suitable for electric circuit protection in various applications. With a very fast blow characteristic and gold nickel terminal finish, it offers high reliability with a rated breaking capacity of 50A and pre arcing rating of 0.05 A2/s.
BK/ATM-15
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated DC Voltage: 32 V; Rated Current: 15 A; Terminal Shape: TAB/BLADE; Additional Features: RATED BREAKING CAPACITY AT 32 VDC: 1000 A;
80ET
80ET fuse by Eaton Corporation is a 80A electric fuse with a rated AC voltage of 690V and rated breaking capacity of 200kA. With dimensions of 48mm x 19.1mm, it is suitable for inline mounting applications in compliance with standards BS88 and CE.
JJS-50
Eaton Corporation's JJS-50 fuse, rated at 50A and 600V AC, features a very fast blow characteristic with a breaking capacity of 200kA. With dimensions of 20.6mm x 39.7mm and end cap terminals, it is commonly used for electric circuit protection in various applications compliant with CE, CSA, and UL standards.
0251004.MRT1L
Littelfuse 0251004.MRT1L PICO fuse, rated 125V, 4A with very fast blow characteristic. Ideal for circuit protection in applications requiring supplemental protection at -55 to 125 °C. Features include trip time of 0.004s, nominal joule integral of 2.45J, and terminal shape PIN WIRE.
LP-CC-15
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 150 V; Rated Current: 15 A; Terminal Shape: END CAP;
LPT-45
Eaton Corporation's LPT-45 fuse, rated at 45A and 600V AC/300V DC, features a time lag blow characteristic. With a rated breaking capacity of 200kA, it is used for electric circuit protection in inline/holder mounting applications. Dimensions: 20.57mm x 39.62mm with end cap terminals; complies with CSA and UL standards.
AJT60
Mersen S A
AJT60 fuse by Mersen S A is a 60A time delay electric fuse with a rated AC voltage of 700V and rated DC voltage of 400V. It features a body size of 27mm x 60mm, end cap terminal shape, and inline/holder mounting feature. Ideal for circuit protection in applications requiring high breaking capacity up to 200kA.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
PSX1XLUB0200X
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated DC Voltage: 1500 V; Rated Current: 200 A; Terminal Shape: TAB/BLADE; Built-in Features: INDICATOR;
PSX1XLFL0450X
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated DC Voltage: 1500 V; Rated Current: 450 A; Terminal Shape: THREADED; Nominal Joule Integral: 149336 J;
PSX1XLFL0200X
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated DC Voltage: 1500 V; Rated Current: 200 A; Terminal Shape: THREADED; Rated Breaking Capacity: 250000 A;
PSX1XLDB0200X
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated DC Voltage: 1500 V; Rated Current: 200 A; Terminal Shape: TAB/BLADE; Rated Breaking Capacity: 250000 A;
PSX1XLDB0450X
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated DC Voltage: 1500 V; Rated Current: 450 A; Terminal Shape: TAB/BLADE; Built-in Features: INDICATOR;
PSX1XLFL0125X
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated DC Voltage: 1500 V; Rated Current: 125 A; Terminal Shape: THREADED; Built-in Features: INDICATOR;
PSX1XLDB0350X
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated DC Voltage: 1500 V; Rated Current: 350 A; Terminal Shape: TAB/BLADE; Body Height: 51.5 mm;
PSX1XLFL0250X
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated DC Voltage: 1500 V; Rated Current: 250 A; Terminal Shape: THREADED; Blow Characteristic: FAST;
PSX1XLDB0500X
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated DC Voltage: 1500 V; Rated Current: 500 A; Terminal Shape: TAB/BLADE; Nominal Joule Integral: 250109 J;
PSX1XLDB0250X
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated DC Voltage: 1500 V; Rated Current: 250 A; Terminal Shape: TAB/BLADE; Blow Characteristic: FAST;
PSX1XLDB0550X
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated DC Voltage: 1500 V; Rated Current: 550 A; Terminal Shape: TAB/BLADE; Built-in Features: INDICATOR;
PSX1XLFL0100X
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated DC Voltage: 1500 V; Rated Current: 100 A; Terminal Shape: THREADED; Packing Method: BULK;
PSX1XLDB0315X
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated DC Voltage: 1500 V; Rated Current: 315 A; Terminal Shape: TAB/BLADE; Reference Standard: CUL; UL;
PSX1XLFL0160X
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated DC Voltage: 1500 V; Rated Current: 160 A; Terminal Shape: THREADED; Rated Breaking Capacity: 250000 A;
PSX1XLDB0160X
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated DC Voltage: 1500 V; Rated Current: 160 A; Terminal Shape: TAB/BLADE; Body Width: 51.5 inch;
PSX1XLDB0630X
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated DC Voltage: 1500 V; Rated Current: 630 A; Terminal Shape: TAB/BLADE; Rated Breaking Capacity: 250000 A;
PSX1XLDB0400X
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated DC Voltage: 1500 V; Rated Current: 400 A; Terminal Shape: TAB/BLADE; Packing Method: BULK;
PSX1XLDB0080X
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated DC Voltage: 1500 V; Rated Current: 80 A; Terminal Shape: TAB/BLADE; Nominal Joule Integral: 2048 J;
PSX1XLDB0125X
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated DC Voltage: 1500 V; Rated Current: 125 A; Terminal Shape: TAB/BLADE; Rated Breaking Capacity: 250000 A;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved