Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SILICON SURGE PROTECTOR; Package Style (Meter): IN-LINE; Surface Mount: NO; Terminal Position: SINGLE; Configuration: SERIES CONNECTED, 2 ELEMENTS; No. of Elements: 2;
Median Price
-
Lifecycle Status
Suppliers In-Stock
0
In-Stock Inventory
< 1k
Silicon Surge Protectors P6002AB64RB attributes and parameters. Explore more Silicon Surge Protectors devices from Littelfuse
Maximum Breakdown Voltage:
Minimum Breakdown Voltage:
Configuration:
JESD-30 Code:
JESD-609 Code:
Non Repetitive Peak On-state Current:
No. of Elements:
No. of Terminals:
Package Body Material:
Package Shape:
Package Style (Meter):
Qualification:
Surface Mount:
Terminal Finish:
Terminal Form:
Terminal Position:
Trigger Device Type:
P6002AB64RB Triggering Devices trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8541.30.00.80
SB
Littelfuse is a diversified industrial technology manufacturing company empowering a sustainable, connected, and safer world. Across more than 20 countries, and with approximately 18,000 global associates, we partner with customers to design and deliver innovative, reliable solutions. Serving over 100,000 end customers, our products are found in a variety of industrial, transportation, and electronics end markets—everywhere, every day. Headquartered in Chicago, Illinois, United States, Littelfuse was founded in 1927.
USBLC6-2SC6
STMicroelectronics
USBLC6-2SC6 by STMicroelectronics is a unidirectional transient voltage suppressor diode with a breakdown voltage of 6V. It has a max clamping voltage of 17V and operates in temperatures ranging from -40 to 125°C. This device, with dual terminals and matte tin finish, is ideal for protecting sensitive electronics from voltage spikes in various applications.
CRG0805F10K
TE Connectivity
TE Connectivity's CRG0805F10K is a 10000 ohm fixed resistor with 1% tolerance. It operates b/w -55 to 155 °C and has a power dissipation of 0.125 W. Ideal for surface mount applications in various electronic circuits due to its compact size and high temperature rating.
MBRS130LT3G
Onsemi
MBRS130LT3G by Onsemi is a Schottky rectifier diode with a max output current of 1A and forward voltage of 0.445V. It operates b/w -65 to 125°C, has a reverse test voltage of 30V, and is ideal for power applications due to its small outline package style.
OPA2277UA/2K5E4
Texas Instruments
OPA2277UA/2K5E4 by Texas Instruments is a dual operational amplifier with low-offset and micropower features. It has a max input offset voltage of 100uV, nominal common mode reject ratio of 140dB, and min slew rate of 0.8V/us. Ideal for industrial applications requiring precise signal amplification in compact designs.
2N7002
Changzhou Galaxy Century Microelectronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Minimum DS Breakdown Voltage: 60 V; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; No. of Terminals: 3;
LM358MX
ROHM
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: LSOP; Package Shape: RECTANGULAR;
KSZ9031RNXIA
Microchip Technology
KSZ9031RNXIA by Microchip is a 48-terminal Ethernet transceiver with data rate of 1000 Mbps. Operating temperature range from -40 to 85°C makes it suitable for industrial applications. This square-shaped chip carrier has a very thin profile and matte tin finish, ideal for network interfaces.
ULN2803A
Rochester Electronics
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Additional Features: LOGIC LEVEL COMPATIBLE; Qualification: Not Qualified;
BSS138
Good-ark Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 6 ohm; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
LL4148
Sinyork
RECTIFIER DIODE; Surface Mount: YES; Config: SINGLE; No. of Phases: 1; No. of Elements: 1; Maximum Repetitive Peak Reverse Voltage: 100 V;
1N4148
Tak Cheong Electronics Holdings
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM358AN
LM358AN by Texas Instruments is an Operational Amplifier with 2 functions. It has a Max Input Offset Voltage of 5000 uV and Nominal Common Mode Reject Ratio of 85 dB. Widely used in voltage-feedback applications due to its high Min Voltage Gain of 15000 and Unity Gain Bandwidth of 1000 kHz.
NE555D
NXP Semiconductors
SQUARE; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: LSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
Crimson Semiconductor
Silicon Standard
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
BAV99
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
CRGCQ0805F10R
TE Connectivity's CRGCQ0805F10R is a 10 ohm fixed resistor with 1% tolerance and 400 ppm/°C temperature coefficient. It is a surface mount thick film resistor in an 0805 package, suitable for applications requiring precise resistance values in compact electronic circuits.
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
LM7805CT
LM7805CT by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1.5A. It operates b/w 0-125°C, has a dropout voltage of 2V, and offers excellent line/load regulation for various electronic applications.
TISP4080M3LM
TISP4080M3LM by Texas Instruments is a single silicon surge protector with 32A peak current. It operates b/w -40°C to 150°C, has 80V breakdown voltage, and UL recognized. Ideal for protecting electronic devices from power surges in various applications.
NP2600SET3G
NP2600SET3G by Onsemi is a Silicon Surge Protector with THYRISTOR technology. It has a max operating temp of 150 °C, min operating temp of -40°C, and max breakdown voltage of 300V. Ideal for protecting electronic devices from power surges in various applications.
TISP2125F3P
TISP2125F3P by Texas Instruments is a silicon surge protector with 3 delta-connected elements. It has a max breakdown voltage of 125V and non-repetitive peak on-state current of 6A. Ideal for protecting electronic devices from surges, it features UL recognized standards and comes in an inline package style.
TISP4125F3LM
TISP4125F3LM by Texas Instruments is a single silicon surge protector with 4A non-repetitive peak on-state current. It has a max breakdown voltage of 125V and operates b/w -40°C to 150°C. Ideal for protecting electronic devices from voltage surges in various applications.
MMT05B350T3
The Onsemi MMT05B350T3 is a silicon surge protector with 32A peak current, 300V DC off-state voltage, and 400V breakdown voltage. It is a thyristor surge protector in a small outline package suitable for surface mount applications. Ideal for protecting electronic devices from power surges in various industries.
TISP3180F3DR
TISP3180F3DR by Texas Instruments is a Silicon Surge Protector with 4A Non Repetitive Peak On-state Current, 145V DC Off-state Voltage, and 180V Breakdown Voltage. It is used for surge protection in various applications like telecommunications equipment and industrial electronics due to its THYRISTOR technology.
TISP4350L3BJR
TISP4350L3BJR by Texas Instruments is a single silicon surge protector with 13A non-repetitive peak current. It has a max breakdown voltage of 350V and operates b/w -40°C to 150°C. Ideal for protecting electronic devices from power surges in various applications.
TPA130
STMicroelectronics' TPA130 is a single silicon surge protector with 16A non-repetitive peak current and 130V repetitive peak reverse voltage. It is used for surge protection in applications requiring isolated case connection, with operating temperatures ranging from -55 °C to 150°C.
NTVB065NSC-L
NTVB065NSC-L by Onsemi is a Silicon Surge Protector with a max breakdown voltage of 88V. It has a trigger device type of SILICON SURGE PROTECTOR and operates b/w -40 °C to 150°C. Ideal for applications requiring protection against voltage surges in compact electronic devices.
NP2100SAMCT3G
NP2100SAMCT3G by Onsemi is a single silicon surge protector with 20A non-repetitive peak on-state current. It has a max DC off-state voltage of 180V and operates b/w -55 to 150 °C. Ideal for applications requiring protection against surges in electronic circuits.
P1500SD
Brightking
THYRISTOR SURGE PROTECTOR; Package Style (Meter): SMALL OUTLINE; Surface Mount: YES; Terminal Position: DUAL; Configuration: SINGLE; Case Connection: MAIN TERMINAL 2;
TISP4400M3LM
TISP4400M3LM by Texas Instruments is a single silicon surge protector with 32A peak current. It operates b/w -40°C to 150°C, has 400V breakdown voltage, and UL recognized. Ideal for protecting electronic devices from power surges in various applications.
TISP7350F3DR
TISP7350F3DR by Texas Instruments is a 3-element surge protector with 4.3A peak current, ideal for protecting circuits. It features a max breakdown voltage of 350V and operates b/w 0-70°C. This thyristor surge protector is UL recognized and surface mountable in a small outline package.
SMP100LC-35
SMP100LC-35 by STMicroelectronics is a silicon surge protector with 35V repetitive peak reverse voltage and 24A non-repetitive peak on-state current. It is a single configuration device in a small outline package, suitable for surface mount applications. Operating temperature ranges from -55°C to 150°C, making it ideal for various electronic systems requiring surge protection.
NTVB170SC-L
NTVB170SC-L by Onsemi is a Silicon Surge Protector with max. breakdown voltage of 265V, operating temp. range -40 to 150 °C, and trigger device type as silicon surge protector. It has a small outline package style and is suitable for surface mount applications in various electronic circuits.
NP1800SCT3G
NP1800SCT3G by Onsemi is a single silicon surge protector with 2 terminals, max breakdown voltage of 220V, and trigger device type as thyristor. It has a small outline package shape and is surface mountable. Ideal for protecting electronic devices from power surges in various applications.
7EL2
7EL2 by Texas Instruments is a single silicon surge protector with 10A non-repetitive peak on-state current. It features a metal-sealed co-fired ceramic body, surface mount capability, and a max breakdown voltage of 400V. Ideal for applications requiring protection against surges in temperatures ranging from -40 to 65°C.
SMP100LC-90
SMP100LC-90 by STMicroelectronics is a single silicon surge protector designed for surface mount applications. It features a non-repetitive peak on-state current of 24 A, a repetitive peak reverse voltage of 90 V, and operates b/w -55 °C to 150°C. Ideal for protecting sensitive electronics from voltage spikes.
TISP7125F3DR
TISP7125F3DR by Texas Instruments is a silicon surge protector with 3 delta-connected elements. It has a non-repetitive peak on-state current of 4.3A and max breakdown voltage of 125V. Ideal for protecting electronic circuits from voltage surges in various applications.
MMT10B260T3
The Onsemi MMT10B260T3 is a silicon surge protector with a max DC off-state voltage of 200V and max breakdown voltage of 320V. It operates b/w -40 °C to 175°C, making it suitable for protecting electronic devices from power surges in various applications. This single configuration device comes in a small outline package with dual terminals for surface mount assembly.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
P6002AB64
Littelfuse
SILICON SURGE PROTECTOR; Package Style (Meter): IN-LINE; Surface Mount: NO; Terminal Position: SINGLE; Configuration: SERIES CONNECTED, 2 ELEMENTS; Terminal Form: THROUGH-HOLE;
P6002AB60
SILICON SURGE PROTECTOR; Package Style (Meter): IN-LINE; Surface Mount: NO; Terminal Position: SINGLE; Configuration: SERIES CONNECTED, 2 ELEMENTS; JESD-30 Code: R-PSIP-T3;
P6002AAL60RP
SILICON SURGE PROTECTOR; Package Style (Meter): IN-LINE; Surface Mount: NO; Terminal Position: SINGLE; Configuration: SERIES CONNECTED, CENTER TAP, 2 ELEMENTS; No. of Terminals: 3;
P6002AB61RB
SILICON SURGE PROTECTOR; Package Style (Meter): IN-LINE; Surface Mount: NO; Terminal Position: SINGLE; Configuration: SERIES CONNECTED, 2 ELEMENTS; Package Shape: RECTANGULAR;
P6002AB60RP
SILICON SURGE PROTECTOR; Package Style (Meter): IN-LINE; Surface Mount: NO; Terminal Position: SINGLE; Configuration: SERIES CONNECTED, CENTER TAP, 2 ELEMENTS; Maximum Time At Peak Reflow Temperature (s): 60;
P6002AATP
P6002AA60
SILICON SURGE PROTECTOR; Package Style (Meter): IN-LINE; Surface Mount: NO; Terminal Position: SINGLE; Configuration: SERIES CONNECTED, CENTER TAP, 2 ELEMENTS; Non Repetitive Peak On-state Current: 20 A;
P6002AB60RB
SILICON SURGE PROTECTOR; Package Style (Meter): IN-LINE; Surface Mount: NO; Terminal Position: SINGLE; Configuration: SERIES CONNECTED, 2 ELEMENTS; Terminal Finish: TIN LEAD;
P6002AAL60TP
SILICON SURGE PROTECTOR; Package Style (Meter): IN-LINE; Surface Mount: NO; Terminal Position: SINGLE; Configuration: SERIES CONNECTED, CENTER TAP, 2 ELEMENTS; JESD-30 Code: R-PSIP-T3;
P6002AB61
SILICON SURGE PROTECTOR; Package Style (Meter): IN-LINE; Surface Mount: NO; Terminal Position: SINGLE; Configuration: SERIES CONNECTED, 2 ELEMENTS; JESD-30 Code: R-PSIP-T2;
P6002AB60TA
P6002AARP
THYRISTOR SURGE PROTECTOR; Package Style (Meter): IN-LINE; Surface Mount: NO; Terminal Position: SINGLE; Configuration: SERIES CONNECTED, 2 ELEMENTS; No. of Terminals: 2;
P6002AB61TA
P6002AA60TP
SILICON SURGE PROTECTOR; Package Style (Meter): IN-LINE; Surface Mount: NO; Terminal Position: SINGLE; Configuration: SERIES CONNECTED, CENTER TAP, 2 ELEMENTS; Maximum Operating Temperature: 150 Cel;
P6002AB
THYRISTOR SURGE PROTECTOR; Package Style (Meter): IN-LINE; Surface Mount: NO; Terminal Position: SINGLE; Configuration: SERIES CONNECTED, CENTER TAP, 2 ELEMENTS; Qualification: Not Qualified;
P6002AA
THYRISTOR SURGE PROTECTOR; Package Style (Meter): IN-LINE; Surface Mount: NO; Terminal Position: SINGLE; Configuration: SERIES CONNECTED, CENTER TAP, 2 ELEMENTS; JESD-30 Code: R-PSIP-T3;
P6002AA60RP
P6002AALTP
SILICON SURGE PROTECTOR; Package Style (Meter): IN-LINE; Surface Mount: NO; Terminal Position: SINGLE; Configuration: SERIES CONNECTED, CENTER TAP, 2 ELEMENTS; Moisture Sensitivity Level (MSL): 1;
P6002AB60TP
SILICON SURGE PROTECTOR; Package Style (Meter): IN-LINE; Surface Mount: NO; Terminal Position: SINGLE; Configuration: SERIES CONNECTED, CENTER TAP, 2 ELEMENTS; Minimum Operating Temperature: -40 Cel;
P6002AB64RB
Teccor Electronics
SILICON SURGE PROTECTOR; Package Style (Meter): IN-LINE; Surface Mount: NO; Terminal Position: SINGLE; Configuration: SERIES CONNECTED, 2 ELEMENTS; Minimum Breakdown Voltage: 270 V;
Supply Digital Components
1+ parts
$106.00
100+ parts
$54.25
1k+ parts
$11.90
10k+ parts
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved