Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
THYRISTOR SURGE PROTECTOR; Package Style (Meter): CYLINDRICAL; Surface Mount: NO; Terminal Position: BOTTOM; Configuration: SINGLE; Case Connection: ISOLATED;
Median Price
$0.468
Lifecycle Status
Suppliers In-Stock
6
In-Stock Inventory
1k+
Verical
1+ parts
-
100+ parts
1k+ parts
$0.607
10k+ parts
Future Electronics
$0.330
Bristol Electronics
$0.450
$0.336
$0.312
Dan-Mar Components
ACDS - Activité Composants Distribution Service
Vyrian
Advanced Electronics
$2.607
$2.372
$2.138
AZTECH Wire
$10.020
Perfect Parts
Authorized Procurement Solutions
Silicon Surge Protectors P3100EALRP1 attributes and parameters. Explore more Silicon Surge Protectors devices from Littelfuse
Maximum Breakdown Voltage:
Case Connection:
Configuration:
Maximum DC Off-state Voltage:
Maximum Holding Current:
JEDEC-95 Code:
JESD-30 Code:
JESD-609 Code:
Moisture Sensitivity Level (MSL):
Non Repetitive Peak On-state Current:
No. of Elements:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Qualification:
Reference Standard:
Sub-Category:
Surface Mount:
Terminal Finish:
Terminal Form:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Trigger Device Type:
P3100EALRP1 Triggering Devices trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8541.30.00.80
SB
Littelfuse is a diversified industrial technology manufacturing company empowering a sustainable, connected, and safer world. Across more than 20 countries, and with approximately 18,000 global associates, we partner with customers to design and deliver innovative, reliable solutions. Serving over 100,000 end customers, our products are found in a variety of industrial, transportation, and electronics end markets—everywhere, every day. Headquartered in Chicago, Illinois, United States, Littelfuse was founded in 1927.
LP2950CDT-3.3G
Onsemi
LP2950CDT-3.3G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.1A. It has a small outline package style, operates at temperatures ranging from -40 to 125 °C, and is suitable for applications requiring low dropout voltage and precise voltage regulation in electronic circuits.
1N4148
Semitron
RECTIFIER DIODE; Surface Mount: NO; JESD-609 Code: e0; Maximum Output Current: .15 A; Maximum Operating Temperature: 200 Cel; Maximum Reverse Recovery Time: .004 us;
FDC5614P
FDC5614P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features 20A Max IDM and 0.105 ohm RDS(ON), operating in ENHANCEMENT MODE at -55 to 150 °C. This SMALL OUTLINE transistor has a built-in diode, GULL WING terminals, and METAL-OXIDE SEMICONDUCTOR technology.
2N7002
Sinyork
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Operating Temperature: 85 Cel; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Operating Mode: ENHANCEMENT MODE;
C0603C104K5RACTU
KEMET Corporation
KEMET C0603C104K5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V URdc. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic circuits.
SMBJ18CA
Db Lectro
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Taitron Components
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Itt Components
RECTIFIER DIODE; Surface Mount: NO; Config: SINGLE; Maximum Operating Temperature: 200 Cel; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Output Current: .15 A;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
LL4148
RECTIFIER DIODE; Surface Mount: YES; Config: SINGLE; No. of Phases: 1; No. of Elements: 1; Maximum Repetitive Peak Reverse Voltage: 100 V;
2N2222A
Boca Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Surge Components
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
NC7WZ17P6X
Fairchild Semiconductor
BUFFER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 6; Package Code: TSSOP; Package Shape: RECTANGULAR;
L78L05ABZ-AP
STMicroelectronics
L78L05ABZ-AP by STMicroelectronics is a BIPOLAR fixed positive single output standard regulator with an operating temperature range of -40 to 125°C. It has a nominal output voltage of 5V, max load regulation of 0.06%, and can handle a max output current of 0.07A. Ideal for applications requiring stable voltage regulation in various electronic devices.
BAV99
Continental Device India
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Hy Electronic
ULN-2803A
Sprague Electric
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: OTHER; Terminal Form: THROUGH-HOLE; No. of Terminals: 18; Package Code: DIP; Package Shape: RECTANGULAR;
EPCS4SI8N
Intel
EPCS4SI8N by Intel is a small outline flash memory with 512Kx8 organization, operating at 3.3V. It features a max clock frequency of 40MHz and endurance of 100k write/erase cycles. Ideal for industrial applications requiring configuration memory with serial interface and low standby current consumption.
4554
Jw Miller Magnetics
Other Semiconductors;
NP1500SAT3G
NP1500SAT3G by Onsemi is a single silicon surge protector with a max DC off-state voltage of 140V and trigger device type as thyristor. It has a max operating temperature of 150 °C and is ideal for applications requiring UL recognized surge protection in small outline packages.
SMP100-8
SMP100-8 by STMicroelectronics is a silicon surge protector with 60A non-repetitive peak on-state current and 6V repetitive peak reverse voltage. It is a surface-mount device in a small outline package, ideal for protecting electronic circuits from voltage surges in various applications.
ST4
Semitronics
SILICON SURGE PROTECTOR; Surface Mount: NO; Repetitive Peak Reverse Voltage: 9 V; Maximum Operating Temperature: 125 Cel; Minimum Operating Temperature: -55 Cel; Maximum Breakdown Voltage: 18 V;
RBO08-40G
RBO08-40G by STMicroelectronics is a silicon surge protector with a max clamping voltage of 40V. It features a single configuration with built-in diode and operates at a max temperature of 150 °C. Ideal for surface mount applications, this device offers protection against voltage surges in electronic circuits.
TLP200G-1
TLP200G-1 by STMicroelectronics is a silicon surge protector designed for robust applications. It features a max breakdown voltage of 290 V, non-repetitive peak on-state current of 31 A, and a delta-connected configuration with three elements. Ideal for protecting sensitive electronics from voltage spikes.
SMP100LC-400
SMP100LC-400 by STMicroelectronics is a silicon surge protector with 24A non-repetitive peak on-state current and 400V repetitive peak reverse voltage. It is a surface-mount device in a small outline package, ideal for protecting electronic circuits from voltage surges. Operating at up to 150°C, it features matte tin terminal finish and dual terminal position for efficient performance.
0603ESDA-AEC1
Eaton Corporation
0603ESDA-AEC1 by Eaton Corp is a SINGLE silicon surge protector with RECTANGULAR package. It operates b/w -55 to 125°C, complies with AEC-Q200 & IEC-61000-4-2 standards. Ideal for surface mount applications requiring protection against electrical surges.
P0080SCLRP
Littelfuse
THYRISTOR SURGE PROTECTOR; Terminal Finish: Matte Tin (Sn); JESD-609 Code: e3; Moisture Sensitivity Level (MSL): 1; Maximum Time At Peak Reflow Temperature (s): 40; Qualification: Not Qualified;
SMP100-140
SMP100-140 by STMicroelectronics is a silicon surge protector with 60A non-repetitive peak on-state current and 120V repetitive peak reverse voltage. It is a single configuration device in a plastic/epoxy package, suitable for surface mount applications. With a max operating temperature of 150 °C, it offers protection against surges in various electronic circuits.
SMTPB68
SMTPB68 by STMicroelectronics is a single silicon surge protector designed for surface mounting. It features a non-repetitive peak on-state current of 50 A and a max breakdown voltage of 90 V, making it ideal for protecting sensitive electronics. Its compact rectangular package ensures efficient space utilization in various applications.
TISP4095M3BJ
Texas Instruments
TISP4095M3BJ by Texas Instruments is a single silicon surge protector with 32A peak current, 75V DC voltage, and 150°C max temp. Ideal for protecting circuits from surges in applications like power supplies and telecommunications due to its thyristor surge protection design.
P1500SD
Teccor Electronics
THYRISTOR SURGE PROTECTOR; Package Style (Meter): SMALL OUTLINE; Surface Mount: YES; Terminal Position: DUAL; Configuration: SINGLE; Package Body Material: PLASTIC/EPOXY;
TISP2290
TISP2290 by Texas Instruments is a silicon surge protector with 3 elements in delta configuration. It offers a non-repetitive peak on-state current of 10A and a max breakdown voltage of 290V. Ideal for applications requiring UL recognized trigger devices for surge protection in through-hole terminals.
SMP50-240
SMP50-240 by STMicroelectronics is a single silicon surge protector designed for surface mounting. It features a non-repetitive peak on-state current of 16 A, a repetitive peak reverse voltage of 240 V, and operates b/w -55 °C to 150°C. Ideal for protecting circuits from voltage spikes in compact electronic devices.
TLP200MTR
TLP200MTR by STMicroelectronics is a silicon surge protector with 3 delta-connected elements. It features a non-repetitive peak on-state current of 31A and a max breakdown voltage of 290V. This surface-mount device in a small outline package is ideal for protecting electronic circuits from voltage surges.
TISP4265M3BJR-S
Bourns
TISP4265M3BJR-S by Bourns is a single silicon surge protector with a max DC off-state voltage of 200V. It has a non-repetitive peak on-state current of 32A and operates b/w -40°C to 150°C. Ideal for protecting electronic circuits from transient overvoltage events in various applications.
NP1500SCMCT3G
NP1500SCMCT3G by Onsemi is a single silicon surge protector with 30A non-repetitive peak on-state current. It has a max DC off-state voltage of 140V and operates b/w -55 to 150 °C. Ideal for applications requiring protection against surges, it features a thyristor trigger device in a small outline package suitable for surface mount assembly.
P3100SB
THYRISTOR SURGE PROTECTOR; Package Style (Meter): SMALL OUTLINE; Surface Mount: YES; Terminal Position: DUAL; Configuration: SINGLE; JESD-609 Code: e0;
NP2300SAMCT3G
NP2300SAMCT3G by Onsemi is a silicon surge protector with 20A non-repetitive peak on-state current. It features a max DC off-state voltage of 190V and trigger device type as thyristor. Ideal for applications requiring protection against voltage surges in electronic circuits.
SMP50-100
SMP50-100 by STMicroelectronics is a silicon surge protector designed for surface mount applications. It features a non-repetitive peak on-state current of 16 A, a max breakdown voltage of 133 V, and operates in temperatures from -55 °C to 150°C. Ideal for protecting sensitive electronics from voltage spikes.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
P3100SCMCLRP
The Littelfuse P3100SCMCLRP is a silicon surge protector with a non-repetitive peak on-state current of 30A. It features a max DC off-state voltage of 275V and operates b/w -40°C to 150°C. Ideal for protecting electronic devices from power surges in various applications.
P3100SBLRP
THYRISTOR SURGE PROTECTOR; Peak Reflow Temperature (C): 260; Qualification: Not Qualified; Moisture Sensitivity Level (MSL): 1; Terminal Finish: MATTE TIN; JESD-609 Code: e3;
P3100SALRP
THYRISTOR SURGE PROTECTOR; Terminal Finish: MATTE TIN; Qualification: Not Qualified; Maximum Time At Peak Reflow Temperature (s): 30; JESD-609 Code: e3; Peak Reflow Temperature (C): 260;
P3100SCLRP
THYRISTOR SURGE PROTECTOR; Moisture Sensitivity Level (MSL): 1; Qualification: Not Qualified; JESD-609 Code: e3; Terminal Finish: MATTE TIN; Maximum Time At Peak Reflow Temperature (s): 40;
Ohmite Manufacturing
THYRISTOR SURGE PROTECTOR; Package Style (Meter): SMALL OUTLINE; Surface Mount: YES; Terminal Position: DUAL; Configuration: SINGLE; Qualification: Not Qualified;
Pulse Electronics
THYRISTOR SURGE PROTECTOR; Package Style (Meter): SMALL OUTLINE; Surface Mount: YES; Terminal Position: DUAL; Configuration: SINGLE; Package Shape: RECTANGULAR;
Brightking
THYRISTOR SURGE PROTECTOR; Package Style (Meter): SMALL OUTLINE; Surface Mount: YES; Terminal Position: DUAL; Configuration: SINGLE; Maximum DC Off-state Voltage: 275 V;
Yangzhou Yangjie Electronics
THYRISTOR SURGE PROTECTOR; Package Style (Meter): SMALL OUTLINE; Surface Mount: YES; Terminal Position: DUAL; Configuration: SINGLE; No. of Terminals: 2;
THYRISTOR SURGE PROTECTOR; Package Style (Meter): SMALL OUTLINE; Surface Mount: YES; Terminal Position: DUAL; Configuration: SINGLE; No. of Elements: 1;
Mde Semiconductor
THYRISTOR SURGE PROTECTOR; Package Style (Meter): SMALL OUTLINE; Surface Mount: YES; Terminal Position: DUAL; Configuration: SINGLE; Non Repetitive Peak On-state Current: 30 A;
P3100EAALP1
SILICON SURGE PROTECTOR; Package Style (Meter): CYLINDRICAL; Surface Mount: NO; Terminal Position: BOTTOM; Configuration: SINGLE; Maximum DC Off-state Voltage: 275 V;
P3100EALAP
P3100EALRP2
P3100EA
THYRISTOR SURGE PROTECTOR; Package Style (Meter): CYLINDRICAL; Surface Mount: NO; Terminal Position: BOTTOM; Configuration: SINGLE; Maximum Breakdown Voltage: 350 V;
P3100EAALP2
SILICON SURGE PROTECTOR; Package Style (Meter): CYLINDRICAL; Surface Mount: NO; Terminal Position: BOTTOM; Configuration: SINGLE; Minimum Operating Temperature: -40 Cel;
P3100EARP1
P3100EARP2
THYRISTOR SURGE PROTECTOR; Package Style (Meter): CYLINDRICAL; Surface Mount: NO; Terminal Position: BOTTOM; Configuration: SINGLE; JEDEC-95 Code: TO-92;
P3100ADL
THYRISTOR SURGE PROTECTOR; Package Style (Meter): IN-LINE; Surface Mount: NO; Terminal Position: SINGLE; Configuration: SINGLE; Package Body Material: PLASTIC/EPOXY;
THYRISTOR SURGE PROTECTOR; Package Style (Meter): CYLINDRICAL; Surface Mount: NO; Terminal Position: BOTTOM; Configuration: SINGLE; Maximum Operating Temperature: 150 Cel;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved