Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
THYRISTOR SURGE PROTECTOR; Maximum Time At Peak Reflow Temperature (s): 30; Peak Reflow Temperature (C): 260; Moisture Sensitivity Level (MSL): 1; Terminal Finish: MATTE TIN; JESD-609 Code: e3;
Median Price
-
Lifecycle Status
Suppliers In-Stock
4
In-Stock Inventory
1k+
ComSIT Distribution GmbH
1+ parts
100+ parts
1k+ parts
10k+ parts
ComSIT USA
Vyrian
Specialty Parts & Electronic Components, Inc. (S.P.E.C.)
AZTECH Wire
$20.380
Kepictronics
Silicon Surge Protectors P1301SALRP attributes and parameters. Explore more Silicon Surge Protectors devices from Littelfuse
JESD-609 Code:
Moisture Sensitivity Level (MSL):
Peak Reflow Temperature (C):
Terminal Finish:
Maximum Time At Peak Reflow Temperature (s):
Trigger Device Type:
P1301SALRP Triggering Devices trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
PCN Design/Specification - Multiple Devices Molding Compound 18/Mar/2020 Mult Dev Epoxy Chg 31/Mar/2023
Littelfuse is a diversified industrial technology manufacturing company empowering a sustainable, connected, and safer world. Across more than 20 countries, and with approximately 18,000 global associates, we partner with customers to design and deliver innovative, reliable solutions. Serving over 100,000 end customers, our products are found in a variety of industrial, transportation, and electronics end markets—everywhere, every day. Headquartered in Chicago, Illinois, United States, Littelfuse was founded in 1927.
2N7002
Bytesonic Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Terminal Position: DUAL; Minimum Operating Temperature: -55 Cel;
NE555D
STMicroelectronics
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LL4148
Itt Components
RECTIFIER DIODE; Surface Mount: YES; Maximum Reverse Recovery Time: .005 us; Config: SINGLE; Maximum Operating Temperature: 200 Cel; Maximum Non Repetitive Peak Forward Current: 1 A;
2N2222A
General Diode
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
BAV99
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Ksl Microdevices
2N7002-T1-E3
Vishay Intertechnology
Vishay Intertechnology's 2N7002-T1-E3 is a N-CHANNEL FET for SWITCHING applications. Features include 60V DS Breakdown Voltage, 0.115A Drain Current, and 7.5 ohm On Resistance. With ENHANCEMENT MODE operation, this GULL WING transistor is ideal for small outline surface mount designs up to 150°C.
Allegro MicroSystems
SMBJ18CA
Uniohm
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
OPA2227UA
Texas Instruments
OPA2227UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 200 uV and bias current of 0.01 uA. It operates at temperatures ranging from -40 to 85 °C, making it suitable for industrial applications requiring precise signal amplification. With a unity gain bandwidth of 8000 kHz, this op amp is ideal for high-frequency circuit designs.
1N4148WS
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Micro Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
2N7002DWH6327XTSA1
Infineon Technologies
2N7002DWH6327XTSA1 by Infineon: N-CHANNEL FET with 60V DS Breakdown Voltage, 0.3A ID, and 3ohm RDS. Ideal for SWITCHING applications in small outline packages with GULL WING terminals.
FDV303N
Onsemi
FDV303N by Onsemi is a N-CHANNEL FET with 25V DS Breakdown Voltage, 0.68A Drain Current, and 0.45 ohm On Resistance. Ideal for SWITCHING applications, it operates in ENHANCEMENT MODE at temperatures ranging from -55 to 150°C. Package style is SMALL OUTLINE with GULL WING terminals for surface mount assembly.
M39029/58-360
Positronic Industries
CONNECTOR ACCESSORY; MIL-Connector Accessory Name: CONTACT; DIN Conformity: NO; National Stock Number (NSN): 5999004733551; Mating Contacts: M39029/56-348, M39029/57-354; Contact Type: CRIMP REAR RELEASE;
BSS138PS,115
NXP Semiconductors
NXP Semiconductors' BSS138PS,115 is a N-CHANNEL FET with 60V DS breakdown voltage and 0.32A max drain current. Ideal for switching applications, it features a 1.6 ohm max on-resistance and operates in enhancement mode. The transistor comes in a small outline package with GULL WING terminals, making it suitable for surface mount designs.
EPCS4SI8N
Altera
CONFIGURATION MEMORY; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Parallel or Serial: SERIAL;
LM317TG
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Minimum Input-Output Voltage Differential: 3 V; Qualification Status: Not Qualified; No. of Functions: 1;
Unisonic Technologies
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Package Body Material: PLASTIC/EPOXY; Package Shape: RECTANGULAR;
NP0640SET3G
NP0640SET3G by Onsemi is a Silicon Surge Protector with THYRISTOR technology. It has a max operating temp of 150 °C, min operating temp of -40°C, and max breakdown voltage of 77V. Ideal for surface mount applications requiring surge protection up to 150mA holding current.
ETP01-1621RL
STMicroelectronics ETP01-1621RL is a Silicon Surge Protector with 25V breakdown voltage, 30mA holding current, and -55 to 150°C operating temperature range. It is surface mountable and ideal for protecting electronic circuits from voltage surges in various applications.
TISP4165M3LM
TISP4165M3LM by Texas Instruments is a single silicon surge protector with a non-repetitive peak on-state current of 32A. It operates b/w -40°C to 150°C, featuring a max breakdown voltage of 165V. Ideal for applications requiring reliable overvoltage protection like telecommunications and industrial equipment.
NP1800GARLG
NP1800GARLG by Onsemi is a single silicon surge protector with 170V DC off-state voltage and 220V max breakdown voltage. It features a thyristor surge protector configuration, suitable for applications requiring isolated case connection and UL recognized reference standard compliance.
TISP4350M3LMFR
TISP4350M3LMFR by Texas Instruments is a single silicon surge protector with 32A peak current. It operates b/w -40°C to 150°C, has 350V breakdown voltage, and UL recognized. Ideal for protecting electronic devices from power surges in various applications.
TISP4145M3LPR
TISP4145M3LPR by Texas Instruments is a single silicon surge protector with 30A non-repetitive peak on-state current. Its cylindrical package body made of plastic/epoxy houses a thyristor surge protector, ideal for bottom terminal applications requiring a max breakdown voltage of 145V.
NP0720SET3G
NP0720SET3G by Onsemi is a Silicon Surge Protector with THYRISTOR technology. It has a max operating temp of 150 °C, min operating temp of -40°C, and max breakdown voltage of 88V. Ideal for protecting electronic devices from power surges in various applications.
NUD4700SNT1G
NUD4700SNT1G by Onsemi is a silicon surge protector with 1.3A max on-state current and 10V max DC off-state voltage. Ideal for protecting electronic circuits from voltage spikes, it has a trigger device type of silicon surge protector and operates b/w -40 to 150°C.
NP1100SCMCT3G
NP1100SCMCT3G by Onsemi is a silicon surge protector with a non-repetitive peak on-state current of 30A. It features a max DC off-state voltage of 90V and operates b/w -55 °C to 150°C. Ideal for applications requiring protection against surges in electronic circuits.
NP0120TAT1G
NP0120TAT1G by Onsemi is a Silicon Surge Protector with 5 Gull Wing terminals, 12V DC Off-state Voltage, and 125 °C max operating temp. It is used for surge protection in electronic circuits.
TISP4240H3LMFR
TISP4240H3LMFR by Texas Instruments is a single silicon surge protector with 60A non-repetitive peak on-state current. It has a max DC off-state voltage of 180V and trigger device type as thyristor surge protector. Ideal for protecting electronic devices from voltage surges in various applications.
TISP4400M3BJ
TISP4400M3BJ by Texas Instruments is a single silicon surge protector with 32A peak current, 300V off-state voltage, and 150°C max operating temp. Ideal for protecting electronic devices from power surges in various applications.
NP2100SBMCT3G
NP2100SBMCT3G by Onsemi is a single silicon surge protector with a non-repetitive peak on-state current of 30A. It features a max DC off-state voltage of 180V and operates b/w -55 °C to 150°C. Ideal for applications requiring protection against surges in electronic circuits.
SMP30-240
STMicroelectronics SMP30-240 is a single silicon surge protector with 14A non-repetitive peak on-state current. It has a max breakdown voltage of 320V, suitable for surface mount applications in protecting electronic devices from power surges.
TISP3290
TISP3290 by Texas Instruments is a silicon surge protector with 10A non-repetitive peak on-state current. It features a series connected, center tap configuration in a rectangular package style for flange mount. Ideal for applications requiring protection against voltage surges, it has a max breakdown voltage of 290V and is UL recognized.
NP2600SAT3G
NP2600SAT3G by Onsemi is a single silicon surge protector with 2 terminals, max breakdown voltage of 300V, and trigger device type as thyristor. It is used for protecting electronic devices from power surges in applications such as telecommunications equipment and industrial machinery.
TISP2082F3D
TISP2082F3D by Texas Instruments is a silicon surge protector with 3 delta-connected elements. It features a 4A non-repetitive peak on-state current and 66V max DC off-state voltage. Ideal for applications requiring UL-recognized surge protection in compact designs.
TISP8290
TISP8290 by Texas Instruments is a Silicon Surge Protector with 15A Non Repetitive Peak On-state Current and 290V Max Breakdown Voltage. It features SERIES CONNECTED, CENTER TAP configuration in a RECTANGULAR package for FLANGE MOUNT applications.
TISP4200H4BJR
TISP4200H4BJR by Texas Instruments is a single silicon surge protector with 60A non-repetitive peak on-state current. It features a plastic/epoxy package body, C bend terminal form, and operates b/w -40°C to 150°C. Ideal for protecting electronic devices from voltage surges in various applications.
TISP2072F3D
TISP2072F3D by Texas Instruments is a Silicon Surge Protector with 4A Non Repetitive Peak On-state Current, 58V Max DC Off-state Voltage, and 72V Max Breakdown Voltage. It is used for surge protection in various applications due to its Delta Connected configuration and UL Recognized reference standard.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
P1300EB70RP1
Littelfuse
THYRISTOR SURGE PROTECTOR; Package Style (Meter): CYLINDRICAL; Surface Mount: NO; Terminal Position: BOTTOM; Configuration: SINGLE; Peak Reflow Temperature (C): 245;
P1300EAL70RP1
THYRISTOR SURGE PROTECTOR; Package Style (Meter): CYLINDRICAL; Surface Mount: NO; Terminal Position: BOTTOM; Configuration: SINGLE; No. of Elements: 1;
P1300EAALP1
SILICON SURGE PROTECTOR; Package Style (Meter): CYLINDRICAL; Surface Mount: NO; Terminal Position: BOTTOM; Configuration: SINGLE; Package Body Material: PLASTIC/EPOXY;
P1300EARP2
THYRISTOR SURGE PROTECTOR; Package Style (Meter): CYLINDRICAL; Surface Mount: NO; Terminal Position: BOTTOM; Configuration: SINGLE; Terminal Finish: TIN LEAD;
P1300EALAP
THYRISTOR SURGE PROTECTOR; Package Style (Meter): CYLINDRICAL; Surface Mount: NO; Terminal Position: BOTTOM; Configuration: SINGLE; Case Connection: ISOLATED;
P1300EAL
P1300EB70RP2
P1300EA70
SILICON SURGE PROTECTOR; Package Style (Meter): CYLINDRICAL; Surface Mount: NO; Terminal Position: BOTTOM; Configuration: SINGLE; Non Repetitive Peak On-state Current: 30 A;
P1300EAL70RP2
THYRISTOR SURGE PROTECTOR; Package Style (Meter): CYLINDRICAL; Surface Mount: NO; Terminal Position: BOTTOM; Configuration: SINGLE; Peak Reflow Temperature (C): 260;
P1300EAALP2
SILICON SURGE PROTECTOR; Package Style (Meter): CYLINDRICAL; Surface Mount: NO; Terminal Position: BOTTOM; Configuration: SINGLE; Maximum Operating Temperature: 150 Cel;
P1300EARP1
THYRISTOR SURGE PROTECTOR; Package Style (Meter): CYLINDRICAL; Surface Mount: NO; Terminal Position: BOTTOM; Configuration: SINGLE; Qualification: Not Qualified;
P1300EALRP1
P1300EAAP2
SILICON SURGE PROTECTOR; Package Style (Meter): CYLINDRICAL; Surface Mount: NO; Terminal Position: BOTTOM; Configuration: SINGLE; JEDEC-95 Code: TO-92;
P1300EB
THYRISTOR SURGE PROTECTOR; Package Style (Meter): CYLINDRICAL; Surface Mount: NO; Terminal Position: BOTTOM; Configuration: SINGLE; Minimum Operating Temperature: -40 Cel;
P1300EA70RP2
THYRISTOR SURGE PROTECTOR; Package Style (Meter): CYLINDRICAL; Surface Mount: NO; Terminal Position: BOTTOM; Configuration: SINGLE; JESD-30 Code: O-PBCY-T2;
P1300EAL70
SILICON SURGE PROTECTOR; Package Style (Meter): CYLINDRICAL; Surface Mount: NO; Terminal Position: BOTTOM; Configuration: SINGLE; Minimum Breakdown Voltage: 120 V;
P1300EA
P1300EA70RP1
THYRISTOR SURGE PROTECTOR; Package Style (Meter): CYLINDRICAL; Surface Mount: NO; Terminal Position: BOTTOM; Configuration: SINGLE; No. of Terminals: 2;
P1300EAAP1
SILICON SURGE PROTECTOR; Package Style (Meter): CYLINDRICAL; Surface Mount: NO; Terminal Position: BOTTOM; Configuration: SINGLE; Qualification: Not Qualified;
P1300EALRP2
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved