Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
PTC THERMISTOR; Terminal Finish: Matte Tin (Sn) - with Nickel (Ni) barrier; JESD-609 Code: e3;
Median Price
-
Lifecycle Status
Suppliers In-Stock
0
In-Stock Inventory
< 1k
Native Components
1+ parts
$5.180
100+ parts
1k+ parts
10k+ parts
Northwest PG Solutions
$5.076
Non-linear Resistors FEMTOSMDC020F attributes and parameters. Explore more Non-linear Resistors devices from Littelfuse
JESD-609 Code:
Resistor Type:
Terminal Finish:
FEMTOSMDC020F Resistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8533.40.80.70
SB
8533.40.00.80
Littelfuse is a diversified industrial technology manufacturing company empowering a sustainable, connected, and safer world. Across more than 20 countries, and with approximately 18,000 global associates, we partner with customers to design and deliver innovative, reliable solutions. Serving over 100,000 end customers, our products are found in a variety of industrial, transportation, and electronics end markets—everywhere, every day. Headquartered in Chicago, Illinois, United States, Littelfuse was founded in 1927.
L7805CV
Sgs-ates Componenti Electronici S P A
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Terminal Finish: Tin/Lead (Sn/Pb); Nominal Output Voltage-1: 5 V;
LM317T
Integrated Power Semiconductors
Other Regulators; No. of Terminals: 3; Operating Temperature (TJ-Min): 0 Cel; Terminal Pitch: 2.54 mm; Maximum Load Regulation (%): 1.5 %; Nominal Dropout Voltage-1: 3 V;
BSS138
Taitron Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3.5 ohm; Maximum Drain Current (ID): .2 A; Peak Reflow Temperature (C): NOT SPECIFIED;
AB26TRB-32.768KHZ--T
Abracon
AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.
LL4148
International Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
NE555DR
Texas Instruments
NE555DR by Texas Instruments is an Analog Waveform Generation IC with 8 terminals, operating voltage of 5V, and power supplies ranging from 5-15V. It is a versatile component for pulse generation applications due to its small outline package and commercial temperature grade suitability.
Daco Semiconductor
2N2222A
SPC TECHNOLOGY/ MULTICOMP
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
BAV99
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Calogic
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Drain Current (Abs) (ID): .2 A;
1N4148
Frontier Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
MBRA160T3G
Onsemi
MBRA160T3G by Onsemi is a Schottky rectifier diode with a max output current of 1A and forward voltage of 0.51V. It operates b/w -55 to 150°C, has a reverse test voltage of 60V, and is ideal for power applications due to its high efficiency and small outline package style.
ULN2803A
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Package Body Material: PLASTIC/EPOXY; Qualification: Not Qualified;
SMBJ18CA
Alpha & Omega Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SS14
Changzhou Starsea Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Vishay Sprague
BSS138BK,215
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Peak Reflow Temperature (C): 260; Additional Features: LOGIC LEVEL COMPATIBLE; Maximum Operating Temperature: 150 Cel;
Taiwan Semiconductor
Vishay Semiconductors
MPTS2920L150R
Meritek Electronics
MPTS2920L150R by Meritek Electronics is a PTC thermistor resistor with a rated power dissipation of 1.5W and an operating voltage of 33V. It is designed for surface mount applications and has a rectangular package shape with dual-ended terminal placement.
MF-SM075/60-2
Bourns
Bourns MF-SM075/60-2 is a PTC resettable fuse with resistance of 0.23 ohm and operating voltage of 60V. It is used for overcurrent protection, featuring dual-ended terminals in a rectangular SMT package. With an operating temperature range from -40 to 85°C, it meets AEC-Q200, CUL, TUV, and UL standards.
RXEF005
TE Connectivity
TE Connectivity's RXEF005 is a PTC resettable fuse with 20 ohm resistance and rated AC voltage of 60V. Ideal for temperature sensing applications, it has a max operating temp of 85°C and min of -40°C. With radial terminal placement and disk package shape, it is mounted through hole for bulk packing.
60R020XU
Littelfuse
60R020XU by Littelfuse is a PTC resettable fuse with resistance of 1.83 ohm and operating voltage of 60V. It is used for overcurrent protection in applications requiring radial terminal placement and disk package shape. With reference standards including CUL, TUV, and UL, it operates b/w -40 to 85 °C.
590-33AA33-503
Honeywell Sensing And Control
590-33AA33-503 by Honeywell is a NTC thermistor with resistance of 50k ohm and tolerance of 0.2%. It is used for temperature sensing applications, featuring radial terminal placement and flexible wire terminals. With a thermal sensitivity index of 4261 K, it operates b/w -60 to 125 °C.
B72650-M271-K72
TDK
The TDK B72650-M271-K72 is a VARISTOR with 8.6J energy capacity, 275V RMS voltage, and -40 to 85°C operating range. It has dual terminals in a rectangular package for surface mount applications in electronics protection circuits.
B72205S0251K101
TDK's B72205S0251K101 varistor has a max energy capacity of 8.2J, operating voltage of 320V, and max circuit RMS voltage of 250V. Ideal for surge protection in applications requiring high energy absorption like power supplies and industrial equipment due to its metal oxide technology and radial terminal placement.
RXEF250-AP
TE Connectivity's RXEF250-AP is a PTC resettable fuse with resistance of 0.13 ohm and rated power dissipation of 2.5W. Ideal for temperature sensing applications, it has a max operating temperature of 85°C and min of -40°C, featuring radial terminal placement in disk package shape.
11026889-00
TE Connectivity's 11026889-00 is a non-linear resistor with 10000 ohm resistance, rated for temperatures from -55 to 90 °C. It features radial terminal placement and chassis mount package style, ideal for temperature sensing applications due to its thermal sensitivity index of 3694 K.
RF1358-000
PTC RESETTABLE FUSE;
NANOSMDC075F-2
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .09 ohm; Maximum Operating Temperature: 85 Cel; Minimum Operating Temperature: -40 Cel; Package Style (Meter): SMT;
RUEF250-AP
RUEF250-AP by TE Connectivity is a PTC resettable fuse with resistance of 0.07 ohm, rated power dissipation of 1.2W, and URac of 30V. It is used for temperature sensing applications with radial terminal placement in a rectangular package. Operating temperatures range from -40 to 85°C making it suitable for various electronic devices.
0603L010YR
0603L010YR by Littelfuse is a PTC resettable fuse with resistance of 0.9 ohm, operating voltage of 15V, and dual-ended terminals. Ideal for overcurrent protection in various applications. SMT package style with matte tin finish, suitable for surface mounting type.
B59451C1130B070
The TDK B59451C1130B070 is a PTC thermistor with 56 ohm resistance and 440V operating voltage. It is used for overcurrent protection in applications requiring radial terminal placement and disk package shape. With AEC-Q200 reference standard, it offers -40 to 125 °C operating temperature range.
V5.5MLA0603H
V5.5MLA0603H by Littelfuse is a chip varistor with a max operating temperature of 125°C and rated power dissipation of 0.05W. It is used for surge protection in electronic circuits with an operating voltage of 5.5V and max circuit RMS voltage of 6.5V, making it suitable for surface mount applications.
SIOV-S14K275
Siemens
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; Rated Power Dissipation (P): .6 W; Maximum Operating Temperature: 85 Cel; Minimum Operating Temperature: -40 Cel; Shape (Package): DISK PACKAGE;
197-103LAG-A01
Fenwal Electronics
NTC THERMISTOR; Mounting Type: THROUGH HOLE MOUNT; Resistance: 10000 ohm; Maximum Operating Temperature: 125 Cel; No. of Terminals: 2; Minimum Operating Temperature: -60 Cel;
V33MLA1206H
V33MLA1206H by Littelfuse is a VARISTOR with 33 V operating voltage and 0.8 J energy capacity. It has a max circuit RMS voltage of 26 V, suitable for surge protection in electronic circuits. With surface mounting type and dual-ended terminals, it offers reliable overvoltage protection in compact designs.
B57364S0100M000
TDK B57364S0100M000 is a NTC thermistor with 10 ohm resistance, 20% tolerance, and 5.1 W power dissipation. It is used for overcurrent protection in applications requiring radial terminal placement and disk package shape. Operating temperature ranges from -55 to 170 °C.
RUEF900K
TE Connectivity's RUEF900K is a PTC resettable fuse with resistance of 0.02 ohm and rated power dissipation of 4.2W. It is used for temperature sensing applications, featuring radial terminal placement in a rectangular package measuring 24.1mm x 3mm x 31mm. Operating voltage is at 30V with operating temperature range from -40°C to 85°C.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
FEMTOSMDC035F-02
PTC THERMISTOR; Mounting Type: SURFACE MOUNT; Rated Power Dissipation (P): .5 W; No. of Terminals: 2; Terminal Shape: WRAPAROUND; Terminal Finish: Tin (Sn);
PTC THERMISTOR; Mounting Type: SURFACE MOUNT; Rated Power Dissipation (P): .5 W; Thermistor Application: OVERLOAD PROTECTION; Additional Features: 0.28-1 OHMS AT 25 DEG CEL; Shape (Package): RECTANGULAR PACKAGE;
FEMTOSMDC020F-2
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .7 ohm; Maximum Operating Temperature: 85 Cel; Terminal Placement: DUAL ENDED; JESD-609 Code: e3;
TE Connectivity's FEMTOSMDC020F-2 is a PTC resettable fuse with resistance of 0.7 ohm and operating voltage of 9V. It offers overcurrent protection in SMT applications, featuring dual-ended terminals and a rectangular package for surface mounting. Operating temperature ranges from -40 to 85°C, meeting CSA, TUV, and UL standards.
FEMTOSMDC005F-2
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: 3.8 ohm; Maximum Operating Temperature: 85 Cel; Thermistor Application: OVERCURRENT PROTECTION; JESD-609 Code: e3;
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: 3.8 ohm; Maximum Operating Temperature: 85 Cel; Terminal Shape: WRAPAROUND; Package Style (Meter): SMT;
FEMTOSMDC012F-2
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: 1.1 ohm; Maximum Operating Temperature: 85 Cel; JESD-609 Code: e3; Terminal Placement: DUAL ENDED;
FEMTOSMDC016F
PTC RESETTABLE FUSE; Maximum Operating Temperature: 85 Cel; Minimum Operating Temperature: -40 Cel; Height (Package): .75 mm; Width (Package): 1 mm; Dimensions: 1.8mm x 1mm x 0.75mm;
FEMTOSMDC016F-02
FEMTOSMDC016F-2
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: 1 ohm; Maximum Operating Temperature: 85 Cel; Packing Method: TR, EMBOSSED, 7 INCH; Operating Voltage: 9 V;
FEMTOASMDC005F-2
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: 3.8 ohm; Maximum Operating Temperature: 85 Cel; Reference Standard: AEC-Q200; TS 16949; Terminal Finish: Matte Tin (Sn) - with Nickel (Ni) barrier;
FEMTOASMDC010F/15
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Maximum Operating Temperature: 85 Cel; Additional Features: MINIMUM RESISTANCE IS 2 OHMS, STANDARD: TS 16949; Terminal Placement: DUAL ENDED; Minimum Operating Temperature: -40 Cel;
FEMTOSMDC008F-2
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: 2.8 ohm; Maximum Operating Temperature: 85 Cel; Thermistor Application: OVERCURRENT PROTECTION; Height (Package): .85 mm;
FEMTOSMDC012F
FEMTOASMDC008F-2
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: 2.8 ohm; Maximum Operating Temperature: 85 Cel; Terminal Placement: DUAL ENDED; Packing Method: TR, EMBOSSED, 7 INCH;
FEMTOSMDC010F
FEMTOASMDC010F/15-2
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: 2 ohm; Maximum Operating Temperature: 85 Cel; Package Style (Meter): SMT; Height (Package): .85 mm;
FEMTOSMDC010F-02
PTC THERMISTOR; Resistance: 8 ohm; Reference Standard: CSA, TUV, UL; Length (Package): 1.8 mm; Width (Package): 1 mm; Dimensions: 1.8mm x 1mm x 0.85mm;
FEMTOSMDC010F/15
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: 2 ohm; Terminal Shape: WRAPAROUND; Terminal Placement: DUAL ENDED; Width (Package): 1 mm;
FEMTOSMDC008F
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved