Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TDK B57237-S330-M is a NTC thermistor with 33 ohm resistance, rated for 265V AC. It has thermal sensitivity index of 3300 K and operates b/w -55 to 170 °C. Ideal for soft start applications, this radial thermistor comes in disk package with through hole mounting.
Median Price
$0.495
Lifecycle Status
Suppliers In-Stock
19
In-Stock Inventory
1k+
RS (Exports)
1+ parts
$0.390
100+ parts
-
1k+ parts
10k+ parts
RS Americas
Arrow
$0.486
$0.480
Chip1Stop
$0.807
$0.630
$0.624
Verical
Nova Conductors
$0.515
Specialty Parts & Electronic Components, Inc. (S.P.E.C.)
VNN
Rebound Electronics
LIBRA Elektronik GmbH
ComSIT Distribution GmbH
ComSIT USA
J2 Sourcing AB
Vyrian
EMSNET
Martec Srl
Component Sense
Pegasus Components GmbH
Halfin
Corohmni
$0.220
Semicontronic
$0.332
$0.324
$0.322
Aztec Data Supply Inc.
$0.446
Argo Parts USA
$0.500
Continental Prestige Electronics
$0.505
Bastille Electronics
$0.489
$0.465
$0.458
Allen Electronics Distributors
$1.330
$1.030
Perfect Parts
Abacus Technologies
GreenTree Electronics
Authorized Procurement Solutions
Metaverse IC Inc.
Eastek
Operates efficiently at ambient temperatures, providing accurate readings and consistent performance.
Ideal for applications requiring soft starting, ensuring gradual and controlled power-up sequences.
Offers a specific resistance value suitable for various circuit requirements.
Capable of withstanding high voltage levels, making it suitable for diverse electrical systems.
Maintains stable performance even at elevated temperatures, increasing reliability and longevity.
Operates effectively in extreme cold conditions, ensuring consistent performance in various environments.
Can handle power dissipation efficiently, making it suitable for high-power applications without overheating.
Non-linear Resistors B57237-S330-M attributes and parameters. Explore more Non-linear Resistors devices from TDK
JESD-609 Code:
Mounting Type:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Height (Package):
Length (Package):
Shape (Package):
Width (Package):
Packing Method:
Rated AC Voltage (URac):
Rated Power Dissipation (P):
Rated Temperature:
Resistance:
Resistor Type:
Terminal Finish:
Terminal Placement:
Terminal Shape:
Thermal Sensitivity Index:
Thermistor Application:
Tolerance:
B57237-S330-M Resistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8533.40.80.70
SB
8533.40.00.80
TDK was founded as a venture enterprise in 1935 for the purpose of industrializing a magnetic material called ferrite, which was invented at the Tokyo Institute of Technology. TDK's corporate motto is "Contribute to culture and industry through creativity," a message that embodies the company's founding spirit. Guided by this spirit, in the ensuing year TDK has sought to refine its materials and process technologies, as it develops new products that satisfy market needs. Concurrently, TDK advances globalization and diversification of its business operation while actively pursuing M&As, collaboration with external partners and other initiatives. As a result, TDK today is engaged in four main businesses: Passive Components, Sensor Application Products, Magnetic Application Products, and Energy Application Products. Looking ahead, TDK would like to remain a dynamic company that continues to deliver even higher value to all stakeholders, including shareholders, customers, suppliers, employees and local communities, by bringing together the entire Group's strengths while taking full advantage of the strengths of each Group company, and constantly drawing on innovative thinking and a willingness to tackle new challenges.
LM317T
STMicroelectronics
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; JESD-30 Code: R-XSFM-T3; Minimum Input-Output Voltage Differential: 3 V;
M39029/58-360
Amphenol
CONNECTOR ACCESSORY; MIL Conformity: YES; Associated Military - Specifications: MIL-DTL-38999; Contact Gender: MALE; Terminal Type: CRIMP; IEC Conformity: NO;
1N4148
Good-ark Electronics
RECTIFIER DIODE; Surface Mount: NO; No. of Elements: 1; Maximum Non Repetitive Peak Forward Current: .5 A; Maximum Forward Voltage (VF): 1 V; No. of Phases: 1;
Taiwan Semiconductor
RECTIFIER DIODE; Surface Mount: NO; Peak Reflow Temperature (C): 260; Maximum Operating Temperature: 175 Cel; JESD-609 Code: e3; No. of Elements: 1;
2N7002
Bytesonic Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Terminal Position: DUAL; Minimum Operating Temperature: -55 Cel;
BAV99WT1G
Onsemi
BAV99WT1G by Onsemi is a series connected diode with 0.006 us reverse recovery time. It is a small outline rectifier diode with 70V peak reverse voltage, ideal for surface mount applications in electronics requiring fast switching and low forward voltage drop.
BSS138LT3G
BSS138LT3G by Onsemi is a N-CHANNEL FET with a min DS breakdown voltage of 50V. It is used for switching applications and has a max drain current of 0.2A and max drain-source on resistance of 3.5 ohm.
SMBJ18CA
Lite-on Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99
Comchip Technology
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358D-T
NXP Semiconductors
LM358D-T by NXP Semiconductors is a dual operational amplifier with 70dB CMRR, 1000kHz unity gain bandwidth, and 9000uV max input offset voltage. Widely used in commercial applications due to its small outline package and low bias current of 0.5uA.
ULN-2803A
Sprague Electric
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: OTHER; Terminal Form: THROUGH-HOLE; No. of Terminals: 18; Package Code: DIP; Package Shape: RECTANGULAR;
1N4148WS
Taitron Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358DR2G
LM358DR2G by Onsemi is a dual operational amplifier with 7000uV max input offset voltage and 70dB nominal CMRR. Ideal for applications requiring low bias current such as sensor interfaces, signal conditioning circuits, and audio amplifiers. Package style: Small Outline, Technology: Bipolar, Unity Gain Bandwidth: 1000 kHz.
First Components International
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.1 V; Polarity: BIDIRECTIONAL; Maximum Repetitive Peak Reverse Voltage: 18 V;
2N2222A
Dionics-usa
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LM7805CT/NOPB
National Semiconductor
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Voltage Tolerance: 5 %; Operating Temperature (TJ-Max): 125 Cel; Maximum Output Voltage-1: 5.25 V;
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .83 W; No. of Elements: 1; Transistor Application: SWITCHING;
Transys Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Minimum DS Breakdown Voltage: 60 V; Maximum Operating Temperature: 150 Cel;
ULN2803A
Allegro MicroSystems
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Maximum Operating Temperature: 85 Cel; Terminal Form: THROUGH-HOLE;
DS18B20Z+
Analog Devices
DS18B20Z+ by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, with ±0.5°C accuracy. Suitable for applications requiring digital output and surface mounting feature.
SG200
Measurement Specialties
NTC THERMISTOR; Mounting Type: THROUGH HOLE MOUNT; Resistance: 5 ohm; Maximum Operating Temperature: 65 Cel; No. of Terminals: 2; Terminal Shape: WIRE;
MF-R110-0
Bourns
The Bourns MF-R110-0 is a PTC resettable fuse with resistance of 0.1 ohm, operating voltage of 30V, and dimensions of 24.2mm x 3mm x 32.9mm. It is used in applications requiring overcurrent protection in electronic circuits due to its non-linear resistor properties and radial terminal placement for through-hole mounting.
ASMD030F-2
TE Connectivity
TE Connectivity's ASMD030F-2 is a PTC resettable fuse with resistance of 0.98 ohm, operating voltage of 60V, and dual-ended terminal placement. Ideal for overcurrent protection applications, it has a max operating temperature of 85°C and min of -40°C. This SMT package features flat terminals and tin finish in a compact size suitable for surface mounting.
EZJZ1V330GA
Panasonic
The Panasonic EZJZ1V330GA is a VARISTOR resistor with 2 terminals, operating voltage of 26V, and max circuit DC voltage of 26V. It has a rectangular SMT package with dual-ended terminal placement for surface mount applications. With an operating temperature range from -40°C to 85°C, it is suitable for various electronic devices requiring transient voltage suppression.
ERTJ1VV154J
Panasonic ERTJ1VV154J is a NTC thermistor with 150000 ohm resistance, 5% tolerance, and 0.1 W power dissipation. It is used for temperature compensation in applications requiring thermal sensitivity index of 4750 K and operating temperatures ranging from -40 to 125 °C. The dual-ended rectangular package with SMT style and wraparound terminals make it suitable for surface mount installations.
RXEF185
Littelfuse
PTC RESETTABLE FUSE; Mounting Type: THROUGH HOLE MOUNT; Resistance: .12 ohm; Maximum Operating Temperature: 85 Cel; Package Style (Meter): Radial; No. of Terminals: 2;
ERZE14A391
The Panasonic ERZE14A391 is a VARISTOR with 275J energy capacity, 320V operating voltage, and 1W power dissipation. Ideal for surge protection in circuits with max 250V RMS or 320V DC voltages. RADIAL terminal placement and DISK PACKAGE shape make it suitable for THROUGH HOLE MOUNT applications.
V42MLA1206NH
Harris Semiconductor
VARISTOR; Mounting Type: SURFACE MOUNT; Maximum Operating Temperature: 125 Cel; Shape (Package): RECTANGULAR PACKAGE; Length (Package): 4.06 mm; Height (Package): 1.8 mm;
ERZV07D470CS
Panasonic's ERZV07D470CS varistor has 2.8J energy capacity, 30V RMS voltage, and -40 to 85°C operating range. Ideal for surge protection in circuits with 38V DC voltage, it features radial terminals and disk package shape for through-hole mounting applications.
GA10K4A1A
TE Connectivity's GA10K4A1A is a non-linear resistor with 2 terminals, operating b/w -40°C to 125°C. With a length of 76mm, it is ideal for temperature sensing applications.
GA10K3A1B
TE Connectivity's GA10K3A1B is a non-linear resistor with 2 terminals, operating from -40 to 125 °C. With a length of 76mm, it is ideal for temperature sensing applications.
1812L035/30DR
1812L035/30DR by Littelfuse is a PTC resettable fuse with resistance of 0.4 ohm. It features dual-ended terminals in a rectangular SMT package. Primarily used for overcurrent protection, it has a max operating temperature of 85°C and can handle up to 30V DC circuits.
RUEF400-AP
PTC RESETTABLE FUSE; Mounting Type: THROUGH HOLE MOUNT; Resistance: .05 ohm; Rated Power Dissipation (P): 2.5 W; Maximum Operating Temperature: 85 Cel; Shape (Package): RECTANGULAR PACKAGE;
EZJP0V6R8MA
EZJP0V6R8MA by Panasonic is a rectangular package varistor with dual-ended terminal placement. It has a max operating temperature of 85°C and operates at a voltage of 3.7V. This surface mount resistor is commonly used in applications that require protection against voltage surges or transients.
NTHS1206N02N1002KE
Vishay Dale
NTC THERMISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10000 ohm; Rated Power Dissipation (P): .28 W; Maximum Operating Temperature: 125 Cel; Tolerance: 10 %;
2920L300/15DR
2920L300/15DR by Littelfuse is a PTC resettable fuse with resistance of 0.015 ohm, operating voltage of 15V, and dual-ended terminal placement. It is used for overcurrent protection in various applications due to its SMT package style and wraparound terminal shape. The rectangular package measures 7.98mm x 5.44mm x 1.25mm and has a max operating temperature of 85°C.
B72220-S511-K101
TDK
The TDK B72220-S511-K101 varistor has a max energy absorption of 190J, operating voltage of 670V, and rated power dissipation of 1W. Ideal for surge protection in applications requiring non-linear resistors with radial terminal placement and disk package shape.
MF-RX160/72-0
The Bourns MF-RX160/72-0 is a PTC resettable fuse with resistance of 0.09 ohm and operating voltage of 72V. It is used for overcurrent protection in applications requiring radial terminal placement and through-hole mounting, with reference standards including CUL, TUV, and UL certifications.
E46226-000
PTC RESETTABLE FUSE; Mounting Type: THROUGH HOLE MOUNT; Rated Power Dissipation (P): 1.5 W; Maximum Operating Temperature: 85 Cel; Rated AC Voltage (URac): 100 V; No. of Terminals: 2;
RUEF900
TE Connectivity's RUEF900 is a PTC resettable fuse with resistance of 0.02 ohm and rated power dissipation of 4.2W. Ideal for temperature sensing applications, it has a max operating temperature of 85°C and min of -40°C. Terminal placement is radial in a rectangular package, suitable for through hole mounting.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
B57232V5103F360
B57232V5103F360 by TDK is a NTC thermistor with 10000 ohm resistance, 1% tolerance, and 3455 K thermal sensitivity index. It is used for temperature compensation in various applications due to its dual-ended terminal placement and surface mounting type. The thermistor operates b/w -40°C to 150°C, making it suitable for diverse environments.
B57237-S220-M
TDK's B57237-S220-M NTC Thermistor has a resistance of 22 ohm with 20% tolerance. Rated for 265V AC, it operates b/w -55°C to 170°C. Ideal for soft start applications due to its thermal sensitivity index of 3060 K.
Siemens
NTC THERMISTOR; Mounting Type: THROUGH HOLE MOUNT; Resistance: 22 ohm; Maximum Operating Temperature: 170 Cel; Shape (Package): DISK PACKAGE; No. of Terminals: 2;
B57235-S100-M
NTC THERMISTOR; Mounting Type: THROUGH HOLE MOUNT; Resistance: 10 ohm; Maximum Operating Temperature: 170 Cel; No. of Terminals: 2; Thermistor Application: SOFT START;
TDK B57235-S100-M NTC Thermistor with 10 ohm resistance, 265V URac, and 1.8W power dissipation. Ideal for temperature sensing applications with a thermal sensitivity index of 2900 K and operating range from -55°C to 170°C.
B57237-S100-M
NTC THERMISTOR; Mounting Type: THROUGH HOLE MOUNT; Resistance: 10 ohm; Maximum Operating Temperature: 170 Cel; No. of Terminals: 2; Terminal Shape: WIRE;
TDK B57237-S100-M NTC Thermistor, 10 ohm, 265V URac, 3.1W P, -55 to 170°C temp range. Ideal for soft start applications with radial terminal placement in disk package.
B57237-S330-M
NTC THERMISTOR; Mounting Type: THROUGH HOLE MOUNT; Resistance: 33 ohm; Maximum Operating Temperature: 170 Cel; Thermistor Application: SOFT START; Terminal Shape: WIRE;
B57230V2103F260
NTC THERMISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10000 ohm; Rated Power Dissipation (P): .15 W; Maximum Operating Temperature: 125 Cel; Tolerance: 1 %;
B57237-S109-M
NTC THERMISTOR; Mounting Type: THROUGH HOLE MOUNT; Resistance: 1 ohm; Maximum Operating Temperature: 170 Cel; Terminal Shape: WIRE; Minimum Operating Temperature: -25 Cel;
NTC THERMISTOR; Mounting Type: THROUGH HOLE MOUNT; Resistance: 1 ohm; Rated Power Dissipation (P): 3.1 W; Maximum Operating Temperature: 170 Cel; Tolerance: 20 %;
B57227K0333A001
B57227K0333A001 by TDK is a NTC thermistor with 32762 ohm resistance, 10% tolerance, and 0.2 W power dissipation. It is used for temperature sensing applications with a thermal sensitivity index of 4300 K, rated for -55 to 155 °C operating temperatures in radial terminal placement.
B57236S0259M000
NTC RESISTOR; Mounting Type: THROUGH HOLE MOUNT; Resistance: 2.5 ohm; Rated Power Dissipation (P): 2.1 W; Maximum Operating Temperature: 170 Cel; Tolerance: 20 %;
B57237-S509-M
NTC THERMISTOR; Mounting Type: THROUGH HOLE MOUNT; Resistance: 5 ohm; Rated Power Dissipation (P): 3.1 W; Maximum Operating Temperature: 170 Cel; Tolerance: 20 %;
NTC THERMISTOR; Mounting Type: THROUGH HOLE MOUNT; Resistance: 5 ohm; Maximum Operating Temperature: 170 Cel; Thermistor Application: SOFT START; Shape (Package): DISK PACKAGE;
B57235-S609-M
NTC THERMISTOR; Mounting Type: THROUGH HOLE MOUNT; Resistance: 6 ohm; Shape (Package): DISK PACKAGE; Terminal Shape: WIRE; Thermistor Application: SOFT START;
NTC THERMISTOR; Mounting Type: THROUGH HOLE MOUNT; Resistance: 6 ohm; Rated Power Dissipation (P): 1.8 W; Maximum Operating Temperature: 170 Cel; Tolerance: 20 %;
B57237S0100M000
NTC THERMISTOR; Mounting Type: THROUGH HOLE MOUNT; Resistance: 10 ohm; Rated Power Dissipation (P): 3.1 W; Maximum Operating Temperature: 170 Cel; Tolerance: 20 %;
B57237-S229-M
NTC THERMISTOR; Mounting Type: THROUGH HOLE MOUNT; Resistance: 2.2 ohm; Rated Power Dissipation (P): 3.1 W; Maximum Operating Temperature: 170 Cel; Tolerance: 20 %;
B57237S0100M051
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved