Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
PTC THERMISTOR; Resistance: 8 ohm; Reference Standard: CSA, TUV, UL; Length (Package): 1.8 mm; Width (Package): 1 mm; Dimensions: 1.8mm x 1mm x 0.85mm;
Median Price
$1.130
Lifecycle Status
Suppliers In-Stock
3
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
100+ parts
$0.623
1k+ parts
$0.467
10k+ parts
$0.453
Vyrian
-
Nova Conductors
Kepictronics
Futuretech Components
Aranea Global
Authorized Procurement Solutions
Non-linear Resistors FEMTOSMDC010F-02 attributes and parameters. Explore more Non-linear Resistors devices from Littelfuse
Height (Package):
Length (Package):
Width (Package):
Dimensions:
Reference Standard:
Resistance:
Resistor Type:
Sub-Category:
Operating Voltage:
FEMTOSMDC010F-02 Resistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8533.40.80.70
SB
8533.40.00.80
PCN Packaging - Multiple Devices Reel Change 09/Jul/2020
Littelfuse is a diversified industrial technology manufacturing company empowering a sustainable, connected, and safer world. Across more than 20 countries, and with approximately 18,000 global associates, we partner with customers to design and deliver innovative, reliable solutions. Serving over 100,000 end customers, our products are found in a variety of industrial, transportation, and electronics end markets—everywhere, every day. Headquartered in Chicago, Illinois, United States, Littelfuse was founded in 1927.
MC7805CTG
Onsemi
MC7805CTG by Onsemi is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring stable voltage regulation. The package style is flange mount with through-hole terminals, ensuring easy installation and reliability in diverse electronic designs.
SBAV99LT1G
SBAV99LT1G by Onsemi is a rectifier diode with a max repetitive peak reverse voltage of 100V. It has a small outline package style and a fast max reverse recovery time of 0.006 us. It is commonly used in applications requiring low power dissipation and high operating temperatures.
2N2222A
Crystalonics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Microsemi
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Minimum DC Current Gain (hFE): 30; No. of Elements: 1;
SS14
SPC TECHNOLOGY/ MULTICOMP
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
M85049/85-08W02
Glenair
CONNECTOR ACCESSORY; MIL Conformity: YES; Material: ALUMINIUM ALLOY; Associated Backshell Military - Specifications: MIL-DTL-38999; Shell Sizes: 08; DIN Conformity: NO;
National Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .5 A;
1N4148
Semiconductors
RECTIFIER DIODE; Surface Mount: NO; Maximum Repetitive Peak Reverse Voltage: 100 V; Config: SINGLE; No. of Phases: 1; No. of Elements: 1;
BAV99
North American Philips Discrete Products Div
RECTIFIER DIODE; Surface Mount: YES; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Repetitive Peak Reverse Voltage: 70 V; Maximum Reverse Recovery Time: .006 us; Maximum Output Current: .1 A;
AB26TRB-32.768KHZ--T
Abracon
AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.
M24308/2-1F
Air Electro
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; MIL Conformity: YES; Additional Features: STANDARD: MIL-DTL-24308;
Sun Wai Electronic
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Reverse Recovery Time: .004 us; Maximum Repetitive Peak Reverse Voltage: 100 V;
BAV99W-7-F
Diodes Incorporated
Diodes Incorporated BAV99W-7-F is a fast recovery rectifier diode with 2 elements in series connected, center tap configuration. It has a max reverse recovery time of 0.004 us and can handle a max output current of 0.15 A. Ideal for applications requiring fast switching capabilities and operating temperatures ranging from -65 to 150 °C.
LM358N
STMicroelectronics
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
2N7002
Unisonic Technologies
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Package Body Material: PLASTIC/EPOXY; Package Shape: RECTANGULAR;
LM555CM
Renesas Electronics
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
Continental Device India
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
1N4148WS
Rugao Dachang Electronic
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
USBLC6-2SC6
USBLC6-2SC6 by STMicroelectronics is a unidirectional transient voltage suppressor diode with a breakdown voltage of 6V. It has a max clamping voltage of 17V and operates in temperatures ranging from -40 to 125°C. This device, with dual terminals and matte tin finish, is ideal for protecting sensitive electronics from voltage spikes in various applications.
2920L110/60MR-A
Littelfuse
2920L110/60MR-A by Littelfuse is a PTC thermistor with resistance of 0.12 ohm, operating voltage of 60V, and max circuit DC voltage of 60V. It is used for overcurrent protection in various applications due to its dual-ended terminal placement and surface mounting type.
B72214S0511K101
TDK
The TDK B72214S0511K101 is a VARISTOR with 510V max circuit RMS voltage and 110J energy absorption. It operates b/w -40 to 105°C, ideal for surge protection in various electronic applications. With radial terminal placement and metal oxide technology, it offers reliable performance in bulk packaging.
V250LA20AP
V250LA20AP by Littelfuse is a VARISTOR with 250V URac and 330V operating voltage. It has a max energy absorption of 72J, ideal for TEMPERATURE COMPENSATION applications. With radial terminal placement and metal oxide film technology, it operates b/w -55°C to 125°C effectively.
NTCS0805E3104FXT
Vishay Intertechnology
Vishay Intertechnology's NTCS0805E3104FXT is a NTC thermistor with 100000 ohm resistance, 1% tolerance, and 4100 K thermal sensitivity index. Ideal for temperature sensing applications due to its dual-ended terminal placement and surface mount package style. Operating range from -40°C to 150°C makes it suitable for various industries.
NTCS0603E3104JXT
Vishay Bc Components
NTC THERMISTOR; Mounting Type: SURFACE MOUNT; Resistance: 100000 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 150 Cel; Tolerance: 5 %;
V5.5MLA0603H23
Harris Semiconductor
VARISTOR;
NTCS0603E3103FMT
Vishay Intertechnology's NTCS0603E3103FMT is a NTC thermistor with 10000 ohm resistance, 1% tolerance, and 3610 K thermal sensitivity index. Ideal for temperature sensing applications with a rated temperature range of -40 to 150 °C. Its SMT package style and dual-ended terminal placement make it suitable for surface mounting in various electronic devices.
TFPT0603L1000JV
Vishay Intertechnology's TFPT0603L1000JV is a PTC thermistor with 100 ohm resistance, 5% tolerance, and 0.075 W power dissipation. It is used for temperature compensation in various applications due to its dual-ended terminal placement and rectangular package shape. With a wide operating temperature range from -55°C to 150°C, it offers reliable performance in diverse environments.
MF-MSMF010-2
Bourns
Bourns MF-MSMF010-2 is a PTC resettable fuse with 0.7 ohm resistance, 60V operating voltage, and dual-ended terminals. Ideal for overcurrent protection in automotive applications due to AEC-Q200 compliance and -40 to 85°C operating temperature range. SMT package style with gold over nickel terminal finish ensures reliable surface mount installation.
NTC0805J5K0
TE Connectivity
TE Connectivity's NTC0805J5K0 is a 5000 ohm NTC thermistor with 5% tolerance. It operates b/w -55°C to 125°C, offering high thermal sensitivity index of 3450 K. Ideal for temperature sensing applications, this surface mount device comes in a rectangular package with dual-ended terminals.
V18MLA0805LNHAUTO
V18MLA0805LNHAUTO by Littelfuse is a VARISTOR with 18V operating voltage, 0.1J energy capacity, and 14V RMS circuit voltage. It is used in automotive applications due to AEC-Q200 standard compliance and surface mounting type.
B72650M0271K072
TDK's B72650M0271K072 is a METAL OXIDE FILM VARISTOR with 8.6J energy capacity, 275V RMS voltage, and 350V operating voltage. Ideal for surge protection in electronics, it has DUAL terminals and operates b/w -40°C to 85°C in surface mount applications.
V130LA5P
V130LA5P by Littelfuse is a varistor with rated AC voltage of 130V and max energy absorption of 20J. It is used for temperature compensation applications, featuring metal oxide film technology and radial terminal placement. With a package style of disk shape, it operates b/w -55°C to 125°C temperatures.
MF-R050-2-99
The Bourns MF-R050-2-99 is a PTC resettable fuse with 60V operating voltage. It offers overcurrent protection with radial terminal placement and matte tin finish. Ideal for applications requiring non-linear resistors, such as circuit protection in various electronic devices.
B72660M0171K072
B72660M0171K072 by TDK is a VARISTOR with METAL OXIDE FILM tech. It has 2 terminals, DUAL placement, and J BEND shape. With a max energy capacity of 13J, it operates b/w -40 to 85°C. Ideal for SURFACE MOUNT applications, it handles up to 225V operating voltage in RECTANGULAR DO-214var package.
RF1344-000
PTC RESETTABLE FUSE; Terminal Finish: MATTE TIN OVER NICKEL; JESD-609 Code: e3;
RXEF250-AP
PTC RESETTABLE FUSE; Mounting Type: THROUGH HOLE MOUNT; Maximum Operating Temperature: 85 Cel; Terminal Shape: WIRE; Packing Method: AMMO PACK; Thermistor Application: TEMPERATURE SENSING;
MICROSMD075F-2
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .11 ohm; Maximum Operating Temperature: 85 Cel; Maximum Circuit DC Voltage: 6 V; Terminal Finish: Matte Tin (Sn) - with Nickel (Ni) barrier;
B72220S2421K101
B72220S2421K101 by TDK is a VARISTOR with 420V RMS and 560V DC max circuit voltage. It has a METAL OXIDE FILM tech, 273J energy capacity, and operates b/w -40 to 105°C. Ideal for surge protection in various electronic applications due to its high energy absorption and temperature range.
RF2567-000
PTC RESETTABLE FUSE; Mounting Type: THROUGH HOLE MOUNT; Resistance: 1.17 ohm; Rated Power Dissipation (P): .77 W; Maximum Operating Temperature: 85 Cel; Terminal Finish: MATTE TIN;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
FEMTOSMDC035F-02
PTC THERMISTOR; Mounting Type: SURFACE MOUNT; Rated Power Dissipation (P): .5 W; No. of Terminals: 2; Terminal Shape: WRAPAROUND; Terminal Finish: Tin (Sn);
PTC THERMISTOR; Mounting Type: SURFACE MOUNT; Rated Power Dissipation (P): .5 W; Thermistor Application: OVERLOAD PROTECTION; Additional Features: 0.28-1 OHMS AT 25 DEG CEL; Shape (Package): RECTANGULAR PACKAGE;
FEMTOSMDC020F-2
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .7 ohm; Maximum Operating Temperature: 85 Cel; Terminal Placement: DUAL ENDED; JESD-609 Code: e3;
TE Connectivity's FEMTOSMDC020F-2 is a PTC resettable fuse with resistance of 0.7 ohm and operating voltage of 9V. It offers overcurrent protection in SMT applications, featuring dual-ended terminals and a rectangular package for surface mounting. Operating temperature ranges from -40 to 85°C, meeting CSA, TUV, and UL standards.
FEMTOSMDC005F-2
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: 3.8 ohm; Maximum Operating Temperature: 85 Cel; Thermistor Application: OVERCURRENT PROTECTION; JESD-609 Code: e3;
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: 3.8 ohm; Maximum Operating Temperature: 85 Cel; Terminal Shape: WRAPAROUND; Package Style (Meter): SMT;
FEMTOSMDC012F-2
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: 1.1 ohm; Maximum Operating Temperature: 85 Cel; JESD-609 Code: e3; Terminal Placement: DUAL ENDED;
FEMTOSMDC016F
PTC RESETTABLE FUSE; Maximum Operating Temperature: 85 Cel; Minimum Operating Temperature: -40 Cel; Height (Package): .75 mm; Width (Package): 1 mm; Dimensions: 1.8mm x 1mm x 0.75mm;
FEMTOSMDC016F-02
PTC RESETTABLE FUSE;
FEMTOSMDC016F-2
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: 1 ohm; Maximum Operating Temperature: 85 Cel; Packing Method: TR, EMBOSSED, 7 INCH; Operating Voltage: 9 V;
FEMTOASMDC005F-2
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: 3.8 ohm; Maximum Operating Temperature: 85 Cel; Reference Standard: AEC-Q200; TS 16949; Terminal Finish: Matte Tin (Sn) - with Nickel (Ni) barrier;
FEMTOASMDC010F/15
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Maximum Operating Temperature: 85 Cel; Additional Features: MINIMUM RESISTANCE IS 2 OHMS, STANDARD: TS 16949; Terminal Placement: DUAL ENDED; Minimum Operating Temperature: -40 Cel;
FEMTOSMDC008F-2
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: 2.8 ohm; Maximum Operating Temperature: 85 Cel; Thermistor Application: OVERCURRENT PROTECTION; Height (Package): .85 mm;
FEMTOSMDC012F
PTC THERMISTOR; Terminal Finish: Matte Tin (Sn) - with Nickel (Ni) barrier; JESD-609 Code: e3;
FEMTOASMDC008F-2
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: 2.8 ohm; Maximum Operating Temperature: 85 Cel; Terminal Placement: DUAL ENDED; Packing Method: TR, EMBOSSED, 7 INCH;
FEMTOSMDC010F
FEMTOASMDC010F/15-2
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: 2 ohm; Maximum Operating Temperature: 85 Cel; Package Style (Meter): SMT; Height (Package): .85 mm;
FEMTOSMDC010F/15
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: 2 ohm; Terminal Shape: WRAPAROUND; Terminal Placement: DUAL ENDED; Width (Package): 1 mm;
FEMTOSMDC008F
FEMTOSMDC010F-02
TE Connectivity's FEMTOSMDC010F-02 is a PTC thermistor with 8 ohm resistance, ideal for overcurrent protection in circuits up to 12V. With compact dimensions of 1.8mm x 1mm x 0.85mm, it meets CSA, TUV, and UL standards for reliable use in various electronic applications.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved