Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
1206L075/13.2WR by Littelfuse is a PTC resettable fuse with resistance of 0.09 ohm, operating voltage of 13.2V, and max temp of 85°C. It's used for overcurrent protection in applications requiring dual-ended terminals and surface mounting type.
Median Price
$0.645
Lifecycle Status
Suppliers In-Stock
19
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
$0.540
100+ parts
$0.380
1k+ parts
$0.289
10k+ parts
$0.234
Element14
$0.630
$0.414
$0.314
$0.291
Newark
$0.660
$0.409
$0.327
-
Arrow
$1.382
Chip1Stop
$2.170
Verical
DigiKey
$0.204
Nova Conductors
$0.224
Maritex
$0.510
$0.129
$0.092
$0.072
Bristol Electronics
$0.525
$0.194
$0.137
Vyrian
IBS Electronics
$0.273
NAC Semi
$0.339
Semtec, LLC
VNN
Dan-Mar Components
Atlantic Semiconductor
Prism Electronics
LIBRA Elektronik GmbH
Argo Parts USA
$0.217
Semicontronic
$0.253
$0.247
$0.245
Continental Prestige Electronics
$0.427
$0.281
$0.192
Perfect Parts
GreenTree Electronics
Metaverse IC Inc.
Kepictronics
Authorized Procurement Solutions
This Thermistor is specifically designed for overcurrent protection, ensuring the safety of the circuit components.
Dual ended terminal placement provides better connectivity and stability for the Thermistor in the circuit.
TR packing method ensures easy handling and storage of the Thermistors in a 7-inch reel.
With a low resistance value of 0.09 ohm, this Thermistor allows for efficient current flow while providing protection.
Surface mount technology (SMT) package style makes it easy to mount the Thermistor on a circuit board for integration.
With a maximum operating temperature of 85°C, this Thermistor can withstand high temperatures, ideal for various applications.
The Thermistor can operate efficiently even at extremely low temperatures down to -40°C, making it versatile in different environments.
Matte tin terminal finish ensures good conductivity and solderability, enhancing the performance and durability of the Thermistor.
Being a positive temperature coefficient (PTC) resettable fuse, this Thermistor provides self-protection against overcurrents, improving the circuit's safety.
With an operating voltage of 13.2 volts, this Thermistor is suitable for a wide range of applications without the risk of voltage overload.
Surface mounting type offers easy and secure installation of the Thermistor on the circuit board for reliable performance.
Compliance with standards such as CUL, TUV, and UL ensures the quality and safety of the Thermistor, meeting industry requirements.
Non-linear Resistors 1206L075/13.2WR attributes and parameters. Explore more Non-linear Resistors devices from Littelfuse
JESD-609 Code:
Mounting Type:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Height (Package):
Length (Package):
Package Style (Meter):
Width (Package):
Packing Method:
Reference Standard:
Resistance:
Resistor Type:
Terminal Finish:
Terminal Placement:
Terminal Shape:
Thermistor Application:
Operating Voltage:
1206L075/13.2WR Resistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8533.40.80.70
SB
8533.40.00.80
Littelfuse is a diversified industrial technology manufacturing company empowering a sustainable, connected, and safer world. Across more than 20 countries, and with approximately 18,000 global associates, we partner with customers to design and deliver innovative, reliable solutions. Serving over 100,000 end customers, our products are found in a variety of industrial, transportation, and electronics end markets—everywhere, every day. Headquartered in Chicago, Illinois, United States, Littelfuse was founded in 1927.
LL4148
Lite-on Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
LM555CM
Texas Instruments
LM555CM by Texas Instruments is an Analog Waveform Generation IC with a supply voltage range of 4.5V to 16V and max operating temperature of 70°C. It comes in a small outline package, suitable for applications requiring pulse generation or rectangular waveform outputs. With surface mount capability and low supply current of 15mA, it is ideal for commercial-grade electronic circuits.
FDD5614P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 42 W; Terminal Position: SINGLE; Terminal Form: GULL WING;
Micronas Semiconductor Holding Ag
RECTIFIER DIODE; Surface Mount: YES; No. of Phases: 1; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Output Current: .2 A; Maximum Forward Voltage (VF): 1.2 V;
SMBJ18CA
Telefunken Microelectronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
ERJ2RKF1002X
Panasonic
Panasonic's ERJ2RKF1002X is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance and operating temperature range of -55 to 155 °C.
OPA2227UA
Burr-Brown Corporation
OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
1N4148
Panjit International
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
B340A-13-F
SPC TECHNOLOGY/ MULTICOMP
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
M24308/2-1F
Tyco Electronics Amp
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; IEC Conformity: NO; Mixed Contacts: NO; Empty Shell: NO;
LAN8720AI-CP-TR
Standard Microsystems
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 24; Package Code: HVQCCN; Package Shape: SQUARE;
BSS138BKW,115
NXP Semiconductors
NXP Semiconductors' BSS138BKW,115 is a N-CHANNEL FET with 60V DS breakdown voltage and 0.32A ID. Ideal for SWITCHING applications, it features a built-in diode, 1.6 ohm RDS(on), and operates in ENHANCEMENT MODE. Suitable for surface mount with GULL WING terminals, it meets AEC-Q101 standards.
Shenzhen Yixinsemi Electronics
FDC5614P
Onsemi
FDC5614P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features 20A Max IDM and 0.105 ohm RDS(ON), operating in ENHANCEMENT MODE at -55 to 150 °C. This SMALL OUTLINE transistor has a built-in diode, GULL WING terminals, and METAL-OXIDE SEMICONDUCTOR technology.
ULN2803A
Vishay Intertechnology
NPN; Configuration: COMPLEX; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Package Body Material: PLASTIC/EPOXY; JESD-30 Code: R-PDIP-T18;
BAV99
Kec
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LFXTAL025159REEL
Iqd Frequency Products
LFXTAL025159REEL by IQD Frequency Products is a 32.768 kHz crystal oscillator with 20 ppm frequency tolerance and 40,000 ohm series resistance. It is ideal for applications requiring precise timekeeping, such as real-time clocks in IoT devices or microcontrollers in wearables. The surface-mount design with a drive level of 1 uW makes it suitable for compact electronic systems.
Yangzhou Yangjie Electronics
LM358AN
STMicroelectronics
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
Bytesonic Electronics
RUEF900K
TE Connectivity
TE Connectivity's RUEF900K is a PTC resettable fuse with resistance of 0.02 ohm and rated power dissipation of 4.2W. It is used for temperature sensing applications, featuring radial terminal placement in a rectangular package measuring 24.1mm x 3mm x 31mm. Operating voltage is at 30V with operating temperature range from -40°C to 85°C.
NTCS0805E3104FXT
Vishay Bc Components
NTC THERMISTOR; Mounting Type: SURFACE MOUNT; Resistance: 100000 ohm; Rated Power Dissipation (P): .21 W; Maximum Operating Temperature: 150 Cel; Tolerance: 1 %;
103AT-2
Semitec
Semitec's 103AT-2 NTC Thermistor has a resistance of 10k ohm with ±1% tolerance. It operates b/w -50°C to 110°C, ideal for temperature compensation applications. With radial terminal placement and disk package shape, it offers high thermal sensitivity index of 3435 K.
MINISMDC150F/24-2
TE Connectivity's MINISMDC150F/24-2 is a PTC resettable fuse with resistance of 0.12 ohm and rated AC voltage of 24 V. It is used for temperature sensing applications, featuring dual-ended terminals in a rectangular package. With dimensions of 4.83mm x 3.41mm x 1.94mm, it operates b/w -40 to 85 °C and conforms to UL, CSA, TUV standards.
V5.5MLA0805NH
Harris Semiconductor
VARISTOR; Mounting Type: SURFACE MOUNT; Maximum Operating Temperature: 125 Cel; Terminal Placement: DUAL ENDED; Length (Package): 3.05 mm; JESD-609 Code: e3;
V275LA40APX1347
Littelfuse
V275LA40APX1347 by Littelfuse is a varistor with rated AC voltage of 275V and max energy absorption of 140J. It operates b/w -55°C to 125°C, suitable for temperature compensation applications. With radial terminal placement and metal oxide film technology, it offers reliable protection in various circuits.
MF-MSMF010-2
Bourns
Bourns MF-MSMF010-2 is a PTC resettable fuse with 0.7 ohm resistance, 60V operating voltage, and dual-ended terminals. Ideal for overcurrent protection in automotive applications due to AEC-Q200 compliance and -40 to 85°C operating temperature range. SMT package style with gold over nickel terminal finish ensures reliable surface mount installation.
RUEF400K-2
TE Connectivity's RUEF400K-2 is a PTC resettable fuse with resistance of 0.05 ohm and rated power dissipation of 2.5W. Ideal for temperature sensing applications, it has a max operating temperature of 85°C and rated AC voltage of 30V. With radial terminal placement and rectangular package shape, it offers reliable protection in various electronic circuits.
RXEF090
PTC RESETTABLE FUSE; Mounting Type: THROUGH HOLE MOUNT; Maximum Operating Temperature: 85 Cel; Width (Package): 3 mm; Rated AC Voltage (URac): 72 V; Packing Method: BULK;
MF-R110-2-99
The Bourns MF-R110-2-99 is a PTC resettable fuse with 30V operating voltage and -40 to 85°C temperature range. It features radial terminal placement, matte tin finish, and disk package shape. Ideal for overcurrent protection applications, it meets CUL, TUV, and UL standards.
RF2622-000
TE Connectivity's RF2622-000 is a PTC resettable fuse with 7.5 ohm resistance and 60V URac. Ideal for temperature sensing applications, it features radial terminal placement in a disk package. With a rated power dissipation of 0.38W, it operates b/w -40 to 85 °C and mounts through hole for reliable performance.
GA1K2A1
TE Connectivity's GA1K2A1 is a non-linear resistor with 2 terminals, operating b/w -40°C to 125°C. With a length of 76mm, it is used for temperature sensing applications.
RXEF110
PTC RESETTABLE FUSE; Mounting Type: THROUGH HOLE MOUNT; Maximum Operating Temperature: 85 Cel; Maximum Circuit RMS Voltage: 72 V; Width (Package): 3 mm; Height (Package): 12.8 mm;
311P18-07S7R6
TE Connectivity's 311P18-07S7R6 is a NTC thermistor with a resistance of 10000 ohm. It has a rated temperature range of -55 to 90 °C and is used for temperature sensing applications. Its radial terminal placement and through hole mounting make it easy to install.
MINISMDC014F-2
TE Connectivity's MINISMDC014F-2 is a PTC resettable fuse with 2 terminals, rated for 60V AC. Its dual-ended terminal placement and rectangular package make it ideal for temperature sensing applications. With a max operating temperature of 85°C, it is designed for surface mounting in various electronic devices.
NTCS0603E3103GMT
NTC THERMISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10000 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 150 Cel; Tolerance: 2 %;
MF-USMF150-2
MF-USMF150-2 by Bourns is a PTC resettable fuse with resistance of 0.03 ohm, operating voltage of 6V, and max temp of 85°C. It's used for overcurrent protection in SMT applications with dual-ended terminals and gold over nickel finish.
V10E150PL1T
V10E150PL1T by Littelfuse is a VARISTOR with 150V RMS and 200V DC max circuit voltage. It has METAL OXIDE FILM tech, 30J energy absorption, and -55 to 85°C operating temp range. Ideal for surge protection in various applications due to its high energy capacity and radial terminal placement.
RXEF075-2
PTC RESETTABLE FUSE; Mounting Type: THROUGH HOLE MOUNT; Maximum Operating Temperature: 85 Cel; Terminal Shape: WIRE; Shape (Package): DISK PACKAGE; Terminal Placement: RADIAL;
GMOV-14D271K
Bourns GMOV-14D271K is a metal oxide varistor with max energy absorption of 155 J. It is used for overload protection in applications with max circuit RMS voltage of 275 V and operating voltage of 350 V. Its radial terminal placement and through hole mounting make it easy to install.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
1206L050/15YR
1206L050/15YR by Littelfuse is a PTC resettable fuse with resistance of 0.15 ohm and operating voltage of 15V. It is used for overcurrent protection, featuring dual-ended terminals and SMT package style. Ideal for applications requiring a max temperature of 85°C and min temperature of -40°C.
1206L012WR
1206L012WR by Littelfuse is a PTC resettable fuse with resistance of 1.5 ohm, operating voltage of 30V, and dual-ended terminal placement. It is used for overcurrent protection in various applications due to its SMT package style, matte tin terminal finish, and compact rectangular package design.
1206L050YR
1206L050YR by Littelfuse is a PTC resettable fuse with a resistance of 0.15 ohm. It is used for overcurrent protection and has dual-ended terminal placement. This surface mount thermistor operates at temperatures ranging from -40 to 85 °C.
1206L016WR
1206L016WR by Littelfuse is a PTC resettable fuse with resistance of 1.2 ohm and operating voltage of 30V, ideal for overcurrent protection applications. Featuring dual-ended terminals and surface mounting type, it has a compact package style (SMT) with dimensions of 3.4mm x 1.8mm x 1.45mm (LxWxH). Compliant with CUL, TUV, and UL standards, it operates b/w -40°C to 85°C temperature range.
1206L020YR
1206L020YR by Littelfuse is a PTC resettable fuse with resistance of 0.65 ohm, operating voltage of 24V, and max temp of 85°C. It's used for overcurrent protection in SMT applications with dual-ended terminals and matte tin finish.
1206L010/60WR
Littelfuse 1206L010/60WR is a PTC resettable fuse with resistance of 1.5 ohm and operating voltage of 60V. It features dual-ended terminals, SMT package style, and matte tin finish. Ideal for overcurrent protection applications with temperature range from -40 to 85°C.
1206L035/16YR
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .3 ohm; Maximum Operating Temperature: 85 Cel; Height (Package): .75 mm; Length (Package): 3.4 mm;
1206L150THWR
1206L150THWR by Littelfuse is a PTC resettable fuse with resistance of 0.04 ohm, operating voltage of 8V, and max temp of 85°C. It is used for overcurrent protection in various applications due to its dual-ended terminal placement and SMT package style. The thermistor has a compact size (3.4mm x 1.8mm x 1mm) and meets standards like CUL, TUV, and UL.
1206L050/15YR-A
PTC RESETTABLE FUSE;
1206L200PR
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .018 ohm; Maximum Operating Temperature: 85 Cel; Package Style (Meter): SMT; Reference Standard: CUL; TUV; UL;
1206L005/60WR
Littelfuse 1206L005/60WR is a PTC resettable fuse with 3.6 ohm resistance and 60V operating voltage. It is used for overcurrent protection in various applications, featuring dual-ended terminals and SMT package style. With a temperature range of -40 to 85°C, it meets CUL, TUV, and UL standards.
1206L025YR
1206L025YR by Littelfuse is a PTC resettable fuse with 0.55 ohm resistance and 16V operating voltage. It is used for overcurrent protection in various applications. Featuring dual-ended terminals, SMT package style, and matte tin finish, it operates b/w -40 to 85 °C temperature range.
1206L300SLTHYR
1206L300SLTHYR by Littelfuse is a PTC resettable fuse with 0.003 ohm resistance and 6V operating voltage. It is used for overcurrent protection in various applications. Featuring dual-ended terminals, SMT package style, and TR packing method, it operates b/w -40°C to 85°C.
1206L020YRT
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .6 ohm; Maximum Operating Temperature: 85 Cel; Packing Method: TR, 7 INCH; JESD-609 Code: e3;
1206L150/12SLYR
1206L150/12SLYR by Littelfuse is a PTC resettable fuse with resistance of 0.01 ohm and operating voltage of 12V. It is used for overcurrent protection in various applications. This surface mount thermistor has dual-ended terminals, rectangular package shape, and operates b/w -40°C to 85°C.
1206L020YR-A
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .65 ohm; Maximum Operating Temperature: 85 Cel; Length (Package): 3.4 mm; Packing Method: TR, 7 INCH;
1206L400SLWR
1206L400SLWR by Littelfuse is a PTC resettable fuse with a resistance of 0.001 ohm and an operating voltage of 6V. It is used for overcurrent protection in various applications, featuring dual-ended terminal placement and surface mounting type.
1206L050/24WR
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .15 ohm; Maximum Operating Temperature: 85 Cel; Packing Method: TR, 7 INCH; No. of Terminals: 2;
1206L025YRT
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .55 ohm; Maximum Operating Temperature: 85 Cel; Packing Method: TR, 7 INCH; Terminal Shape: WRAPAROUND;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved