Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
0217.500MXP fuse by Littelfuse is a 0.5A, 250V rated electric fuse with very fast blow characteristic and 0.01s trip time. Measuring 5x20mm, it has a rated breaking capacity of 35A and is suitable for inline mounting applications in circuits requiring protection against overcurrent events.
Median Price
$0.270
Lifecycle Status
Suppliers In-Stock
26
In-Stock Inventory
1k+
Distrelec
1+ parts
$0.192
100+ parts
-
1k+ parts
10k+ parts
Bürklin Elektronik
$0.163
$0.129
RS Americas
$0.420
$0.336
Mouser Electronics
$0.550
$0.305
$0.244
$0.240
Newark
$0.562
$0.339
$0.266
DigiKey
$0.570
$0.335
$0.256
$0.212
Element14
$0.462
$0.442
$0.364
Verical
$0.252
Arrow
$0.251
RS (Exports)
$0.237
$0.211
Farnell
$0.179
$0.166
TTI
$0.258
Chip1Stop
$0.142
$0.128
Nova Conductors
$0.144
TME
$0.370
$0.223
$0.177
$0.139
IBS Electronics
$0.202
Vyrian
NAC Semi
$0.164
Chip Stock
VNN
Bristol Electronics
Atlantic Semiconductor
Rutronik
$0.096
Cyclops Electronics Ltd
ACDS - Activité Composants Distribution Service
Prism Electronics
Ampacity Inc.
$0.121
Semicontronic
$0.118
$0.117
Advanced Electronics
$0.143
Argo Parts USA
$0.140
Netroflash
$0.137
$0.134
CoreStaff
$0.239
$0.098
$0.090
Aztec Data Supply Inc.
$6.826
Corohmni
$7.838
J3
$11.927
Metaverse IC Inc.
Perfect Parts
Continental Prestige Electronics
GreenTree Electronics
Kepictronics
Authorized Procurement Solutions
High joule rating provides reliable overcurrent protection for sensitive electronic equipment.
Suitable for use in standard AC electrical systems, ensuring compatibility with most applications.
Very fast trip time ensures rapid response to overcurrent conditions, minimizing potential damage to connected devices.
Compact size allows for easy installation in tight spaces or crowded electrical panels.
Designed to handle up to 0.5 amps of current, suitable for low-power electronic devices or circuits.
Provides quick and efficient protection against overcurrent events, safeguarding connected equipment from damage.
Can withstand high temperatures without compromising performance, ensuring reliability in various environmental conditions.
Allows for easy installation and replacement of the fuse in a circuit, providing convenience for maintenance.
Fuses 0217.500MXP attributes and parameters. Explore more Fuses devices from Littelfuse
Circuit Protection Type:
Rated Current:
Rated Breaking Capacity:
Rated AC Voltage:
Rated Voltage:
Body Diameter:
Body Height:
Dimensions:
Blow Characteristic:
Fuse Size/Group:
Trip Time/Delay:
Nominal Joule Integral:
Minimum Operating Temperature:
Maximum Operating Temperature:
Reference Standard:
Terminal Shape:
Terminal Finish:
Mounting Feature:
Packing Method:
0217.500MXP Circuit Protection trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
Littelfuse is a diversified industrial technology manufacturing company empowering a sustainable, connected, and safer world. Across more than 20 countries, and with approximately 18,000 global associates, we partner with customers to design and deliver innovative, reliable solutions. Serving over 100,000 end customers, our products are found in a variety of industrial, transportation, and electronics end markets—everywhere, every day. Headquartered in Chicago, Illinois, United States, Littelfuse was founded in 1927.
LAN8720AI-CP-TR
Standard Microsystems
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 24; Package Code: HVQCCN; Package Shape: SQUARE;
LL4148
Microsemi
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
1N4148
Toshiba
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
2N7002
North American Philips Discrete Products Div
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Operating Mode: ENHANCEMENT MODE; Maximum Drain Current (ID): .115 A;
STM32H753IIT6
STMicroelectronics
STM32H753IIT6 by STMicroelectronics is a 32-bit microcontroller with 176 terminals, operating at up to 48 MHz. It features 20-Ch 16-Bit ADCs and 2-Ch 12-Bit DACs, suitable for industrial applications requiring high-speed data processing and connectivity via CAN, ETHERNET, USB, and more.
FDD5614P
Onsemi
FDD5614P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features 45A IDM and 0.1 ohm RDS(ON), operating in ENHANCEMENT MODE at up to 175°C. The PLASTIC/EPOXY package with GULL WING terminals ensures efficient heat dissipation and reliable performance.
1N4148WS
Panjit International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
Dionics-usa
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LM317T
Comset Semiconductors
Other Regulators; No. of Terminals: 3; Terminal Pitch: 2.54 mm; Minimum Output Voltage-1: 1.2 V; Technology: BIPOLAR; Operating Temperature (TJ-Max): 125 Cel;
MC7805CTG
MC7805CTG by Onsemi is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring stable voltage regulation. The package style is flange mount with through-hole terminals, ensuring easy installation and reliability in diverse electronic designs.
SMBJ18CA
Brightking
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
NC7WZ17P6X
Fairchild Semiconductor
BUFFER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 6; Package Code: TSSOP; Package Shape: RECTANGULAR;
DS18B20+
Analog Devices
DS18B20+ by Analog Devices is a 12-bit temperature sensor with 3.3/5V supply, -55 to 125°C range, and ±0.50°C accuracy. It features a 1-Wire interface for digital output and is commonly used in applications requiring precise temperature monitoring in various industries.
Digitron Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
BAV99WT1G
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
08055C104KAT2A
KYOCERA AVX
08055C104KAT2A by KYOCERA AVX is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic circuits.
M39029/56-351
Carlisle Interconnect Technologies
CONNECTOR ACCESSORY; MIL Conformity: YES; Contact Type: CRIMP; Removal Tools: M81969/8-06, M81969/14-02; IEC Conformity: NO; Contact Gender: FEMALE;
Sensitron Semiconductor
BAV99
Hitano Enterprise
Telcom Semiconductor
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Operating Temperature: 150 Cel; JESD-609 Code: e0;
045801.5DR
Littelfuse
Littelfuse 045801.5DR NANO fuse with 1.5A current rating, 75V DC voltage, and 0.548J joule integral. Ideal for circuit protection in applications requiring a rated AC voltage of 48V, such as automotive electronics and industrial equipment. Dimensions: 3.175mm x 1.575mm x 1.575mm, surface mountable with gold terminal finish for reliable performance in temperatures ranging from -55°C to 125°C.
FNM-2-1/2
Cooper Electronic Technologies
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: 2.5 A; Terminal Shape: END CAP; Rated Breaking Capacity: 100 A;
3403.0169.24
Schurter Ag
3403.0169.24 fuse by Schurter Ag is a 2A, 250V electric fuse with a time lag blow characteristic and rated breaking capacity of 200A. Measuring at 10.1mm x 3mm x 3mm, it is ideal for circuit protection in applications requiring a max operating temperature of 125°C and min pre-arcing time of 10ms.
FRN-R-8
Eaton Corporation
Eaton Corporation's FRN-R-8 fuse, with 8A rated current and 250V AC/125V DC voltage ratings, features a time delay blow characteristic. Measuring 14.3mm x 50.8mm, it is an RK5 class fuse suitable for electric circuit protection in various applications like inline mounting due to its CE, CSA, and UL certifications.
LP-CC-30
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 300 V; Rated Current: 30 A; Terminal Shape: END CAP;
LP-CC-1-8/10
Eaton Corporation LP-CC-1-8/10 fuse, rated 1.8A and 600V AC, with time delay blow characteristic. Inline/holder mounting for circuit protection in applications requiring 300V DC voltage and 200kA breaking capacity. Meets CE, CSA, UL standards for reliable performance in various electrical systems.
0297005.WXNV
Littelfuse 0297005.WXNV fuse, rated at 5A and 32V, offers quick 0.03s trip time with 37J nominal joule integral. Ideal for circuit protection in automotive applications due to its MINI size and TAB/BLADE terminals. Operating range from -40°C to 125°C ensures reliable performance in various conditions.
LPJ-60SP
Eaton Corporation LPJ-60SP fuse, rated 60A at 600V AC/300V DC with J class and time delay blow characteristic. Inline/holder mounting for circuit protection in CE/CSA/UL compliant applications. Dimensions: 27mm x 60.3mm, terminal shape: end cap, breaking capacity: 300kA.
FNQ-R-1-1/8
Eaton Corporation's FNQ-R-1-1/8 fuse, rated at 1.125A and 600V, features a time delay blow characteristic. With a body length of 10.3mm and diameter of 38.1mm, it is ideal for circuit protection in applications requiring inline mounting or holder installation. Compliant with CE, CSA, and UL standards, this CC-class fuse has a high breaking capacity of 200000A.
SR-5-100MA-BK
Cooper Industries
ELECTRIC FUSE; Mounting Feature: THROUGH HOLE; Rated AC Voltage: 250 V; Rated Current: .1 A; Terminal Shape: PIN WIRE; Nominal Joule Integral: .015155 J;
37211000431
Littelfuse 37211000431 fuse, rated at 1A and 250V, features a time lag blow characteristic with trip delay of 0.02s. With dimensions of 8.5mm x 8mm, it is ideal for circuit protection in applications requiring a max operating temperature of 85°C. CCC, CE, CUL, KC, PSE, UL, VDE standards compliant.
LPJ-50SP
Eaton Corporation's LPJ-50SP fuse, rated at 50A and 600V AC/DC, features a J class with time delay blow characteristic. With a compact size of 27mm x 60.3mm, it is ideal for circuit protection in various applications requiring a high breaking capacity of 300kA. Compliant with CE, CSA, and UL standards, it is commonly used in inline or holder mounting configurations.
3403.0277.23
The Schurter Ag 3403.0277.23 fuse is a time lag electric fuse with a rated current of 2A and a max operating temperature of 125°C. It has a nominal joule integral of 9.6J and is suitable for circuit protection in applications requiring a rated AC voltage of 277V and rated DC voltage of 250V.
KTK-15
The Eaton Corporation's KTK-15 fuse is rated for 600V AC with a fast blow characteristic and 15A current. It has a body length of 10.3mm and diameter of 38.1mm, suitable for inline mounting applications requiring electric circuit protection up to 100000A breaking capacity. Compliant with CSA and UL standards, it is ideal for various industrial uses.
0299060ZXNV
Littelfuse 0299060ZXNV fuse with 60A rated current, 15300J nominal joule integral, and 32V DC voltage rating. Ideal for circuit protection in applications requiring a fuse with dimensions of 29.21mm x 8.85mm x 21.59mm and silver terminal finish. Operating temperature range from -40°C to 125°C makes it suitable for various electronic devices.
56000001009
Littelfuse 56000001009 fuse, TR5 size, rated 250V AC/DC. Ideal for circuit protection in electronics. Through-hole mounting, UL and VDE standards compliant, operating temp -40 to 85°C.
JJS-40
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated Current: 40 A; Terminal Shape: END CAP; Dimensions: 20.6mm x 39.7mm;
LP-CC-1-1/8
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 300 V; Rated Current: 1.125 A; Terminal Shape: END CAP;
ANN-500
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated AC Voltage: 125 V; Rated DC Voltage: 80 V; Rated Current: 500 A; Terminal Shape: TAB/BLADE;
ATC-3
The Eaton Corporation's ATC-3 fuse is a 32V, 3A electric fuse with fast blow characteristic. It has a rated breaking capacity of 1000A and operates b/w -40°C to 100°C. Ideal for circuit protection in various applications like automotive, industrial machinery, and electronics due to its compact size and UL standard compliance.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
0217002.MXP
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated DC Voltage: 75 V; Rated Current: 2 A; Terminal Shape: END CAP;
0217005.MXP
Littelfuse 0217005.MXP fuse, rated 5A at 250V, with trip time of 0.01s. Ideal for circuit protection in applications requiring very fast blow characteristic. Dimensions: 5x20mm, terminal shape: end cap, and reference standards include BSI, CCC, CE, UL.
02170.05MXP
Littelfuse 02170.05MXP fuse, rated at 0.05A and 250V, with fast blow characteristic and trip time of 0.003s. Ideal for circuit protection in applications requiring a 5x20mm size fuse with rated breaking capacity of 35A. Operating temperature range from -55 to 125°C makes it suitable for various electronic devices.
0217.400MXP
Littelfuse 0217.400MXP fuse, rated at 0.4A and 250V, offers very fast blow characteristic with trip time of 0.01s. Measuring 5x20mm, it is used for electric circuit protection in applications requiring a compact 5.2mm x 20mm body size and terminal shape end cap.
0217.160MXP
0217.160MXP fuse by Littelfuse is a 5x20mm electric fuse with 0.16A rated current and 250V rated voltage. It has a very fast blow characteristic, 0.01s trip time, and 0.01J nominal joule integral. Ideal for circuit protection in applications requiring inline mounting or holder installation at temperatures ranging from -55°C to 125°C.
0217004.MXP
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated DC Voltage: 60 V; Rated Current: 4 A; Terminal Shape: END CAP;
02170.04MXP
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: .04 A; Terminal Shape: END CAP; Minimum Operating Temperature: -55 Cel;
0217.630MXP
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: .63 A; Terminal Shape: END CAP; Dimensions: 5.2mm x 20mm;
0217005.HXP
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: 5 A; Terminal Shape: END CAP; Body Height: 20 mm;
02170.05HXP
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: .05 A; Terminal Shape: END CAP; Additional Features: PRE ARCHING TIME: OPEN WITHIN 3 MILLISEC AT 400% RATED CURRENT;
0217002.HXP
0217002.HXP fuse by Littelfuse is a 5x20mm electric fuse with a rated current of 2A and a max operating temperature of 125°C. It has a very fast blow characteristic and is commonly used for circuit protection in applications such as CCC, CE, CSA, IEC, KC, PSE, SEMKO, SEV, UL, and VDE standards.
0217001.MXP
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: 1 A; Terminal Shape: END CAP; Blow Characteristic: VERY FAST;
0217.063MXP
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: .063 A; Terminal Shape: END CAP; Dimensions: 5.2mm x 20mm;
02170.16MXP
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: .16 A; Terminal Shape: END CAP; Rated Breaking Capacity: 35 A;
02170.63MXP
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: .63 A; Terminal Shape: END CAP; Fuse Size: 5x20mm;
021701.6MXP
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: 1.6 A; Terminal Shape: END CAP; Reference Standard: CCC; CE; CSA; IEC; KC; PSE; SEMKO; SEV; UL; VDE;
0217010.MXEP
ELECTRIC FUSE; Mounting Feature: THROUGH HOLE; Rated AC Voltage: 250 V; Rated Current: 10 A; Terminal Shape: PIN WIRE; JESD-609 Code: e3;
021706.3MXP
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated DC Voltage: 60 V; Rated Current: 6.3 A; Terminal Shape: END CAP;
02173.15MXP
Littelfuse 02173.15MXP fuse, rated 3.15A and 250V, with blow characteristic VERY FAST, ideal for circuit protection in applications requiring a compact 5x20mm size. Offers high breaking capacity of 35A and operates b/w -55°C to 125°C, meeting standards like BSI, CCC, CE, UL.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved