Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
LTST-C170TBKT by Lite-on Technology is a 1.4mm BLUE LED with WATER CLEAR lens, peak wavelength of 468nm, and max forward current of 0.02A. Ideal for surface mount applications in electronics due to its compact size, high luminous intensity of 130cd, and wide viewing angle of 130°.
Median Price
$0.066
Lifecycle Status
Suppliers In-Stock
38
In-Stock Inventory
1k+
DigiKey
1+ parts
$0.220
100+ parts
$0.104
1k+ parts
$0.077
10k+ parts
$0.061
Mouser Electronics
$0.099
$0.073
Avnet
-
$0.043
Future Electronics
$0.054
Chip1Stop
$0.046
RS (Exports)
$0.075
Verical
$0.057
Edge Electronics
Arrow
$0.084
TME
$0.134
$0.064
Nova Conductors
$0.149
Component Electronics Inc.
$0.320
$0.240
$0.210
Chip Stock
IBS Electronics
$0.076
NAC Semi
$0.093
Schukat
$0.052
Diverse Electronics
Atlantic Semiconductor
Sensible Micro Corp
Bristol Electronics
ComSIT Distribution GmbH
Vyrian
Rutronik
$0.060
Rebound Electronics
LIBRA Elektronik GmbH
Prism Electronics
Elcom Components
ComSIT USA
Flex Direct, LLC
LWI Electronics Inc
Semtec, LLC
Ashlea Components Ltd
Classic Components Corporation
NPI Materials, Inc.
North Shore Components
Resion
EMSNET
A2Z Electronics, Inc.
Semicontronic
$0.039
$0.038
Continental Prestige Electronics
$0.087
$0.085
Argo Parts USA
Netroflash
$0.147
Advanced Electronics
$0.236
$0.224
Corohmni
$0.563
Aztec Data Supply Inc.
$0.760
Perfect Parts
Kepictronics
EMSNET (Excess)
Infinite Electronics LLP (Excess)
This single color LED is ideal for applications where only one color is needed, simplifying the design process.
The compact size of this LED makes it suitable for small electronic devices where space is limited.
The low forward current requirement helps in minimizing power consumption, making it energy-efficient.
The specific peak wavelength of 468 nm ensures a consistent color output for accurate lighting applications.
The water clear lens provides a high level of brightness and visibility, making it ideal for applications where visibility is crucial.
This single color LED simplifies the design process by eliminating the need for complex color mixing and control circuits.
With only 2 terminals, this LED is easy to install and integrate into existing circuitry.
The high operating temperature range of 80°C ensures reliable performance in various environmental conditions.
The low height profile makes it easy to mount this LED in small spaces or on compact circuit boards.
The rectangular shape of this LED provides a wide beam angle, making it suitable for applications where broad lighting coverage is required.
With a minimum operating temperature of -20°C, this LED can withstand cold environments without compromising performance.
The high luminous intensity of 130 cd ensures a bright and visible output, making it suitable for applications where visibility is key.
The specific blue color output at the wavelength specified adds a unique visual appeal to the lighting application.
This blue LED offers a vibrant and attractive color option for various lighting and display applications.
The Tape and Reel (TR) packing method ensures easy handling and integration into automated assembly processes for mass production.
The high reverse voltage rating of 5V provides protection against reverse polarity and ensures the longevity of the LED.
The 2.1 mm terminal pitch allows for easy connection and integration into standard circuit board layouts.
The wide viewing angle of 130° provides a broad lighting coverage area, making it suitable for applications where wide dispersion of light is required.
The high nominal luminous intensity of 70.0 mcd ensures a bright and visible output for various lighting applications.
The surface mounting feature simplifies the installation process and allows for easy integration into various electronic devices.
The low forward voltage requirement of 3.8V helps in minimizing power consumption and ensures energy-efficient operation.
Visible LEDs LTST-C170TBKT attributes and parameters. Explore more Visible LEDs devices from Lite-on Technology
Additional Features:
Color:
Color At Wavelength:
Configuration:
Maximum Forward Current:
Maximum Forward Voltage:
JESD-609 Code:
Lens Type:
Minimum Luminous Intensity:
Nominal Luminous Intensity (mcd):
Mounting Feature:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Optoelectronic Type:
Height:
Packing Method:
Peak Wavelength (nm):
Maximum Reverse Voltage:
Shape:
Size:
Sub-Category:
Terminal Pitch:
Viewing Angle:
LTST-C170TBKT Optoelectronics trade compliance attributes, and parameters.
HTS
8541.40.20.00
SB
Founded in 1975, LITEON embraces being “Best Partner in Opto-Electronic, Eco-Friendly and Intelligent Technologies” as its vision to focus on the development of optoelectronics and key electronic components, and strives to build up competitive edge through resource integration and optimized management. LITEON produces products that are used in a broad range of applications, such as computers, communications, consumer electronics, automotive electronics, LED lighting, cloud computing as well as healthcare. LITEON is a worldwide leading provider of optoelectronics, information technology and storage devices components.
ATMEGA328P-AU
Microchip Technology
ATMEGA328P-AU by Microchip: 8-bit RISC CPU, 20 MHz clock, 23 I/O lines. Ideal for industrial applications with SPI, TWI, USART connectivity and low power mode. Features include 2048 RAM bytes, 1024 EEPROM size, and 16384 ROM words.
LM358M
Texas Instruments
LM358M by Texas Instruments is an Operational Amplifier with 2 functions, featuring a max input offset voltage of 9000 uV and a nominal voltage of 5 V. It is commonly used in applications requiring high common mode rejection ratio and low bias current, such as sensor interfaces and signal conditioning circuits.
BAV99
Rfe International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
FDD5614P
Onsemi
FDD5614P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features 45A IDM and 0.1 ohm RDS(ON), operating in ENHANCEMENT MODE at up to 175°C. The PLASTIC/EPOXY package with GULL WING terminals ensures efficient heat dissipation and reliable performance.
SMBJ18CA
Eic Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Terry Semiconductor
RECTIFIER DIODE; Surface Mount: NO; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; JESD-609 Code: e0; Maximum Repetitive Peak Reverse Voltage: 100 V;
CRCW06031K00FKEAHP
Vishay Intertechnology
Vishay Intertechnology's CRCW06031K00FKEAHP is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.33 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance and operating voltage of 75 V.
STM32F405RGT6
STMicroelectronics
STM32F405RGT6 by STMicroelectronics is a 32-bit microcontroller with 2/3.3V power supplies, 16 external interrupts, and 196608 RAM bytes. Ideal for industrial applications, it features CAN(2), I2C(3), SPI(3) connectivity options and operates at a max clock frequency of 26 MHz. With low power mode and DMA support, it offers versatile performance in compact dimensions.
ABS07-32.768KHZ-T
Abracon
Abracon ABS07-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 144% stability, and 70000 ohm series resistance. Ideal for applications requiring 0.032768 MHz frequency precision in a compact surface-mount design with gold over nickel finish.
M24308/2-1F
Itt Cannon
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Additional Features: STANDARD: MIL-DTL-24308, POLARIZED; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Filter Feature: NO;
Transpro Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; JESD-609 Code: e0; Terminal Finish: Tin/Lead (Sn/Pb); Nominal Breakdown Voltage: 21.1 V; Maximum Clamping Voltage: 29.2 V;
SS14
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Surface Mount: YES; Technology: SCHOTTKY; No. of Phases: 1; Config: SINGLE; Maximum Operating Temperature: 125 Cel;
DS18B20+
Maxim Integrated
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 3; Package Shape or Style: RECTANGULAR; Maximum Operating Current: 1.5 mA; Package Equivalence Code: SIP3,.1,50;
LAN8720A-CP-TR
Standard Microsystems
ETHERNET TRANSCEIVER; Temperature Grade: OTHER; Terminal Form: NO LEAD; No. of Terminals: 24; Package Code: HVQCCN; Package Shape: SQUARE;
CRGCQ0805F10K
TE Connectivity
TE Connectivity's CRGCQ0805F10K is a 10000 ohm fixed resistor with 1% tolerance. It operates b/w -55 to 155 °C and has a power dissipation of 0.125 W. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance.
LL4148
Panjit International
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
ERJ2RKF1002X
Panasonic
Panasonic's ERJ2RKF1002X is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance and operating temperature range of -55 to 155 °C.
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
NE555D
NE555D by Texas Instruments is an 8-terminal IC with a supply voltage range of 4.5V to 16V, suitable for analog waveform generation applications. It operates at temperatures from 0°C to 70°C and has a max supply current of 15mA. The package style is small outline, making it ideal for compact electronic designs.
Bkc Semiconductors
HSMA-C190
Broadcom
HSMA-C190 by Broadcom is a 1mm single color LED with a peak wavelength of 595nm and a viewing angle of 170°. It is commonly used in surface mount applications for its amber color and max forward voltage of 2.4V.
SML-LXL1209SIC-TR
Lumex
The Lumex SML-LXL1209SIC-TR is a 1.8mm WATER CLEAR LED with peak wavelength of 636nm and luminous intensity of 600.0mcd. Ideal for surface mount applications, it operates b/w -30 to 85°C, drawing 0.03A current.
HLMP-3401
Agilent Technologies
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 8.0; Lens Type: TINTED DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb);
LTST-C191KGKT
Lite-on Technology
LTST-C191KGKT by Lite-on Technology is a 1.1mm SINGLE COLOR LED with peak wavelength of 574nm and ultra bright green color. It has a max forward current of 0.03A, viewing angle of 130°, and nominal luminous intensity of 44.5mcd. Ideal for surface mount applications in electronics requiring high brightness green-yellow illumination.
HLMP-1301-E0002
HLMP-1301-E0002 by Broadcom is a 3mm single color LED with peak wavelength of 635nm. It has a max forward current of 0.03A and nominal luminous intensity of 4.95mcd. Ideal for applications requiring high efficiency red light emission, such as indicator lights in electronic devices.
LBP4SG-S2U1-35-1
Osram Opto Semiconductors
Osram Opto Semiconductors' LBP4SG-S2U1-35-1 is a 1.6mm single color LED with peak wavelength of 465nm, ideal for blue light applications. It has a max forward current of 0.02A, viewing angle of 120°, and nominal luminous intensity of 392.0mcd. Suitable for surface mount installations with matte tin over nickel terminal finish.
553-0112-200F
Dialight
Dialight's 553-0112-200F is a dual color LED array with separate, 2-element configuration. Featuring peak wavelengths of 635nm (red) and 565nm (green), it has a size of 3mm and nominal luminous intensities of 10.0/12.6 mcd. Ideal for applications requiring radial mounting, this LED array is suitable for visual indication in various electronic devices.
521-9628F
Dialight's 521-9628F is a 3mm dual color LED with red/green colors, peak wavelengths of 660/565nm, and max forward current of 0.04A. Commonly used in indicator lights for electronics due to its radial mount feature and bulk packing method.
XHP70D-00-0000-0D0HP20E3
Cree Led
SINGLE COLOR LED;
LSQ976
Elma Electronic
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Color: SUPER RED; Shape: RECTANGULAR; Height: .8 mm;
HLMP-3301
Qt Optoelectronics
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 7; Lens Type: RED DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb);
HLMP-4700
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 2; Lens Type: RED DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb);
SSL-LX3059IGW
SSL-LX3059IGW by Lumex is a 3mm dual color LED with common cathode configuration. It has a peak wavelength of 635/565nm and max forward current of 0.025A, making it ideal for applications requiring high intensity red/green light output. With a viewing angle of 60° and radial mount feature, this LED is suitable for various lighting projects in temperatures ranging from -40 to 85°C.
LTL4233
Taiwan Liton Electronic C
LTL4233 by Taiwan Liton Electronic C is a 5mm SINGLE COLOR LED with peak wavelength of 565nm. With max forward current of 0.03A, it emits green light at 8.7mcd luminous intensity. Ideal for applications requiring diffused lighting in electronic devices due to its radial mount feature and T-1 3/4 package design.
HLMP-1301-101F
The Dialight HLMP-1301-101F is a 3mm single color LED with peak wavelength of 635nm. It has a max forward current of 0.03A and nominal luminous intensity of 13.8mcd. Ideal for applications requiring a red light source, such as indicator lights in electronic devices or automotive lighting systems.
SML-210MTT86N
ROHM
ROHM's SML-210MTT86N is a 1.4mm SINGLE COLOR LED with 0.025A max forward current, emitting YELLOWISH GREEN light at 20.5mcd intensity. Ideal for surface mount applications in electronics due to its compact size and low power consumption.
HLMP1301
Aborn Electronics
Visible LEDs; Lens Type: DIFFUSED; Maximum Forward Voltage: 3 V; Peak Wavelength (nm): 635; Maximum Forward Current: .02 A; Minimum Operating Temperature: -55 Cel;
LSR976-NR-1
LSR976-NR-1 by Osram Opto Semiconductors is a 1.3mm single color LED with peak wavelength of 645nm. It has a max forward current of 0.025A and viewing angle of 160°, making it ideal for applications requiring high luminous intensity in super red light, such as automotive lighting and signage displays.
XHP35B-00-0000-0D0BE240E
Wolfspeed
HLMP-1503
Hewlett Packard
SINGLE COLOR LED; Lens Type: DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb); Viewing Angle: 60 deg; Height: 4 mm; JESD-609 Code: e0;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
LTST-C190GKT
LTST-C190GKT by Lite-on Technology is a 1.1mm GREEN LED with WATER CLEAR lens, operating at -55 to 85 °C. It has a peak wavelength of 565nm, forward current of 0.03A, and viewing angle of 130°. Ideal for surface mount applications requiring a single color LED with max luminous intensity of 9.9mcd.
LTST-C190KGKT
LTST-C190KGKT by Lite-on Technology is a 1.1mm GREEN LED with peak wavelength of 574nm, suitable for surface mount applications. It has a max forward current of 0.03A and viewing angle of 130°, making it ideal for low-power indicator lights in electronic devices. Operating temperature ranges from -30 to 85 °C.
LTST-C190KRKT
LTST-C190KRKT by Lite-on Technology is a single color LED with peak wavelength of 639nm. It has a max forward current of 0.025A and viewing angle of 260°, making it ideal for surface mount applications in various electronic devices. With a water clear lens type and red color, this LED operates b/w -30°C to 85°C temperature range.
LTST-C191KRKT
LTST-C191KRKT by Lite-on Technology is a 1.1mm WATER CLEAR LED with peak wavelength of 639nm, emitting RED light at 54.0mcd luminous intensity. Ideal for surface mount applications, it has a max forward current of 0.03A and operates b/w -55 to 85°C, making it suitable for various electronic devices.
LTST-C150CKT
LTST-C150CKT by Lite-on Technology is a single color LED with peak wavelength of 660nm. It has a max forward current of 0.04A and a viewing angle of 130°. Ideal for surface mount applications, this red LED operates b/w -55 to 85 °C temperatures.
LTST-C170KGKT
LTST-C170KGKT by Lite-on Technology is a 1.4mm GREEN LED with WATER CLEAR lens. It has a peak wavelength of 574nm, forward current of 0.03A, and luminous intensity of 35.0mcd. Ideal for surface mount applications in electronics due to its compact size and wide viewing angle of 130°.
LTST-C191KGKT-5A
LTST-C191KGKT-5A by Lite-on Technology is a 1.1mm GREEN SINGLE COLOR LED with a peak wavelength of 574nm and a viewing angle of 130°. It is ideal for surface mount applications requiring a max forward current of 0.03A and an operating temperature range from -55 to 85 °C.
LTST-C193KGKT-5A
LTST-C193KGKT-5A by Lite-on Technology is a single color LED with peak wavelength of 574nm, viewing angle of 130°, and luminous intensity of 16.25mcd. Ideal for surface mount applications in electronics, it operates b/w -55°C to 85°C temperature range and has a compact size of 1.15mm x 0.35mm.
LTST-C190GKTT
LTST-C190GKTT by Lite-on Technology is a single color LED with peak wavelength of 565nm and viewing angle of 130°. With a size of 1.06mm, it has a max forward current of 0.03A making it suitable for surface mount applications in electronics requiring green light emission.
LTST-C19HE1WT
LTST-C19HE1WT by Lite-on Technology is a single color LED with diffused white lens. It has a max forward current of 0.03A and operates b/w -20°C to 80°C. Ideal for applications requiring blue, blue-green, orange-red light emission with a min luminous intensity of 130cd.
LTST-C191TBKT-5A
Visible LEDs;
LTST-C191TBKT
LTST-C191TBKT by Lite-on Technology is a 1.1mm SINGLE COLOR LED with WATER CLEAR lens emitting ULTRA BRIGHT BLUE light at 468nm wavelength. It has a max forward current of 0.02A and viewing angle of 130°, making it ideal for surface mount applications requiring high luminous intensity up to 104.0mcd.
LTST-C170KRKT
LTST-C170KRKT by Lite-on Technology is a 1.4mm single color LED with peak wavelength of 639nm and max forward current of 0.03A. Ideal for applications requiring a red light source, such as indicator lights in electronic devices due to its water clear lens and surface mounting feature.
LTST-C193TBKT-5A
LTST-C193TBKT-5A by Lite-on Technology is a 1.15mm BLUE LED with a peak wavelength of 468nm and viewing angle of 130°. Ideal for surface mount applications, it has a max forward current of 0.02A and operates b/w -20°C to 80°C temperature range.
LTST-C191KRKT-5A
LTST-C171KGKT
LTST-C171KGKT by Lite-on Technology is a 1.4mm GREEN LED with a peak wavelength of 574nm and viewing angle of 130°. Ideal for surface mount applications, it has a max forward current of 0.03A and operates b/w -55°C to 85°C temperatures.
LTST-C150KGKT
LTST-C150KGKT by Lite-on Technology is a single color LED with a peak wavelength of 574nm and max forward current of 0.03A. With water clear lens, it has a viewing angle of 130° and nominal luminous intensity of 35.0mcd. Ideal for surface mount applications requiring green-yellow light emission in compact spaces.
LTST-C193KRKT-5A
LTST-C193KRKT-5A by Lite-on Technology is a single color LED with peak wavelength of 639nm and max forward current of 0.02A. Ideal for applications requiring a red light source, such as indicator lights in electronic devices. With a viewing angle of 130° and water clear lens type, it offers high luminous intensity at 26.05mcd.
LTST-C195KGJRKT
LTST-C195KGJRKT by Lite-on Technology is a 1.5mm DUAL COLOR LED with WATER CLEAR lens, featuring RED/GREEN colors and peak wavelengths of 639nm/574nm. It has a max forward current of 0.03A and viewing angle of 130°, suitable for surface mount applications in various electronic devices due to its compact size and high luminous intensity.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved