Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
DOUBLE BALANCED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 20; Package Body Material: PLASTIC/EPOXY; Technology: CMOS; Maximum Input Power (CW): 15 dBm;
Median Price
$11.703
Lifecycle Status
Suppliers In-Stock
6
In-Stock Inventory
1k+
Arrow
1+ parts
-
100+ parts
1k+ parts
10k+ parts
Chip Stock
Vyrian
Digiode
Anansix
Nova Conductors
Advanced Electronics
$1.160
$1.102
Parana Technologies
$1.180
$1.098
IDEA Electronic Components Group
$1.269
$1.206
DigiPath Technology Company
$1.980
$1.900
MARBEL Systems
$2.037
Texas Native Microelectronics
$2.341
$2.247
$2.177
$2.060
Corohmni
$2.502
Aztec Data Supply Inc.
$2.760
Kenton Components
$2.809
$2.472
Qasali Group International
$6.321
$5.878
$5.562
Ampacity Inc.
$9.950
One Stop Electronics
Semicontronic
$9.701
$9.652
RC Electronics
Lixinc
Authorized Procurement Solutions
Argo Parts USA
Corphita
Continental Prestige Electronics
A-Z Elektronik GmbH
Robosynatics
Lucentia Tech
$8.823
Bastille Electronics
RF/Microwave Mixers LTC5541IUH#TRPBF attributes and parameters. Explore more RF/Microwave Mixers devices from Linear Technology
Characteristic Impedance:
Construction:
Maximum Input Power (CW):
JESD-609 Code:
Mounting Feature:
No. of Terminals:
Maximum Operating Frequency:
Minimum Operating Frequency:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Equivalence Code:
Power Supplies (V):
RF or Microwave Device Type:
Sub-Category:
Technology:
Terminal Finish:
LTC5541IUH#TRPBF RF & Microwave trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
U.S. In July 2016, Analog Devices agreed to buy Linear Technology for 14.8 billion dollars. This acquisition was finalized on March 10, 2017. The Linear name survives as the "Power by Linear" brand that is used to market the combined power management portfolios of Linear Technology and Analog Devices.
LM358N
STMicroelectronics
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
BSS138
Philips Semiconductors
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Operating Mode: ENHANCEMENT MODE; Maximum Operating Temperature: 150 Cel;
SMBJ18CA
First Components International
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.1 V; Polarity: BIDIRECTIONAL; Maximum Repetitive Peak Reverse Voltage: 18 V;
Panjit International
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3 ohm; Minimum DS Breakdown Voltage: 50 V; Terminal Form: GULL WING;
KSZ9031RNXIA
Microchip Technology
KSZ9031RNXIA by Microchip is a 48-terminal Ethernet transceiver with data rate of 1000 Mbps. Operating temperature range from -40 to 85°C makes it suitable for industrial applications. This square-shaped chip carrier has a very thin profile and matte tin finish, ideal for network interfaces.
LL4148
General Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
FDN5618P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Transistor Element Material: SILICON; Moisture Sensitivity Level (MSL): 1;
INA826AIDGKR
Texas Instruments
INA826AIDGKR by Texas Instruments is an instrumentation amplifier with 150uV max input offset voltage, 0.095uA max average bias current, and 1MHz nominal bandwidth. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and high common mode rejection ratio of 120dB.
C0603X104K5RACAUTO
KEMET Corporation
C0603X104K5RACAUTO by KEMET Corp is a ceramic capacitor with capacitance of 0.1 uF and rated DC voltage of 50 V. It has a temperature coefficient of 15% and can operate b/w -55 to 125 °C. This SMT package is commonly used in automotive applications due to its AEC-Q200 reference standard.
Forward International Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Nominal Breakdown Voltage: 21.05 V; Maximum Clamping Voltage: 29.2 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;
BAV99
Surge Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Good-ark Electronics
Sensitron Semiconductor
M24308/2-1F
Tyco Electronics Amp
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; IEC Conformity: NO; Mixed Contacts: NO; Empty Shell: NO;
2N7002
Jiangsu Changjiang Electronics Technology
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Operating Mode: ENHANCEMENT MODE; Transistor Application: SWITCHING;
MMBT3904-7-F
Diodes Incorporated
Diodes Inc. MMBT3904-7-F is a NPN BJT transistor for switching applications. Features include VCEsat of 0.3V, hFE of 30, and IC of 0.2A. With a max operating temp of 150°C, it's ideal for small outline SMT designs in automotive electronics.
SS495A-SP
Honeywell Sensing And Control
SS495A-SP by Honeywell is a magnetic field sensor with 10.5V max supply voltage, 3" body width, and 1.5% linearity. Ideal for applications requiring a Hall effect sensor with -40 to 150°C operating temperature range, such as position sensing in automotive or industrial systems.
BSS138BK,215
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Peak Reflow Temperature (C): 260; Additional Features: LOGIC LEVEL COMPATIBLE; Maximum Operating Temperature: 150 Cel;
Pulse Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Electronic Devices
AD8343ARUZ-REEL7
Analog Devices
AD8343ARUZ-REEL7 by Analog Devices is a RF/Microwave Mixer with 14 terminals, operating voltage of 5V, and max freq of 2500MHz. It has a VSWR of 2 and operates b/w -40 to 85°C. Ideal for applications requiring double balanced RF or microwave devices in surface mount technology.
HMC213AMS8ETR
Analog Devices' HMC213AMS8ETR is a GAAS technology RF/Microwave Mixer with 8 terminals and matte tin finish. It operates b/w -40 °C to 85°C, making it suitable for various applications requiring double balanced surface mount devices.
TUF-3HSM+
Mini-circuits
The Mini-circuits TUF-3HSM+ is a RF/Microwave Mixer with max input power of 23 dBm, VSWR of 1.53, and conversion loss of 8 dB. It is a double balanced component suitable for applications requiring surface mounting in the frequency range from 0.15 MHz to 400 MHz.
AMMC-3041-W50
Broadcom
DOUBLE BALANCED; Minimum Operating Frequency: 18000 MHz; Maximum Operating Frequency: 42000 MHz; Minimum Operating Temperature: -55 Cel; Maximum Operating Temperature: 140 Cel; Characteristic Impedance: 50 ohm;
RMS-30
The Mini-circuits RMS-30 is a ceramic RF mixer with 6 terminals, operating from 200 MHz to 3 GHz. It offers a low conversion loss of 9.8 dB and can handle up to 17 dBm input power. Ideal for RF/microwave applications requiring double balanced mixers in surface mount packages.
HMC215LP4
Analog Devices' HMC215LP4 is a RF/Microwave Mixer with 24 terminals, operating from -40 to 85°C. It features a max input power of 22 dBm, double balanced technology, and operates b/w 1700-4000 MHz. Ideal for applications requiring high frequency conversion with low loss and impedance matching in surface mount configurations.
AMMP-6530
IMAGE REJECTION; Maximum Operating Frequency: 30000 MHz; JESD-609 Code: e4; Maximum Conversion Loss: 10 dB; Minimum Operating Frequency: 5000 MHz; Characteristic Impedance: 50 ohm;
HMC340ALP5ETR
Analog Devices' HMC340ALP5ETR is a GAAS technology RF/Microwave Mixer with 32 terminals. It operates b/w -40 °C to 85°C, featuring a double balanced design for surface mount applications. Ideal for high-frequency signal processing in communication systems.
UPC1685B
Renesas Electronics
RF/Microwave Mixers; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Body Material: CERAMIC; Maximum Operating Temperature: 125 Cel; Terminal Finish: Tin/Lead (Sn/Pb);
HMC523
Analog Devices' HMC523 is an RF/Microwave Mixer with 20 dBm CW input power, 11.5 dB conversion loss, and 50 ohm impedance. It operates b/w -55°C to 85°C, suitable for image rejection applications in the frequency range of 15-23.6 GHz.
HMC521A-SX
Analog Devices' HMC521A-SX is an RF/Microwave Mixer with max input power of 20 dBm, conversion loss of 8.5 dB, and operating frequency range from 8.5 GHz to 13.5 GHz. Ideal for image rejection applications in temperatures ranging from -40°C to 85°C.
HMC521ALC4
HMC521ALC4 by Analog Devices is an RF/Microwave Mixer with a max input power of 20 dBm, operating from -40 to 85°C. It features image rejection type with 50 ohm impedance, conversion loss of 9.5 dB, and operates b/w 8.5-13.5 GHz. Ideal for applications requiring high-frequency mixing in various electronic systems.
HMC410AMS8GE
Analog Devices' HMC410AMS8GE is a RF/Microwave Mixer with 20 dBm CW input power, 11 dB conversion loss, and 50 ohm impedance. It operates b/w -40 to 85 °C and covers frequencies from 9-15 GHz. Ideal for high-frequency applications requiring double balanced mixers.
CMY210
Infineon Technologies
Infineon Technologies' CMY210 is a GAAS RF/Microwave Mixer with 17 dBm CW input power, 7 dB conversion loss, and 500-2500 MHz frequency range. Featuring a double balanced design, it's ideal for surface mount applications requiring high-frequency signal mixing in a 50 ohm system.
LTC5576IUF#PBF
LTC5576IUF#PBF by Analog Devices is a RF/Microwave Mixer with 15 dBm CW input power, operating from 3.3/5V supplies. It features double balanced design, 50 ohm impedance, and operates b/w 3-8 GHz. Ideal for applications requiring high frequency mixing in components assembly.
HMC171C8
HMC171C8 by Analog Devices is a RF/Microwave Mixer with 10 dB max conversion loss, operating from 7-10 GHz. It has a double balanced design, can handle up to 13 dBm CW input power, and operates b/w -55°C to 85°C. Ideal for high-frequency applications requiring precise signal mixing.
HMC-C009
Analog Devices' HMC-C009 is a COAXIAL RF/Microwave Mixer with 50 ohm impedance. It operates from 4-8.5 GHz, handles up to 20 dBm CW power, and offers image rejection type performance. Ideal for applications requiring high frequency conversion with low loss and temperature range of -55 to 85°C.
HMC622LP4ERTR
Analog Devices' HMC622LP4ERTR is a GAAS RF/Microwave Mixer with 24 terminals, operating from -40 to 85°C. It requires a 5V power supply, drawing a max of 220mA. This surface-mount device is ideal for applications requiring high-frequency signal mixing in various electronic systems.
PMB2330
RF/Microwave Mixers; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Body Material: PLASTIC/EPOXY; Technology: BIPOLAR; Power Supplies (V): 3/7;
SA631DK
NXP Semiconductors
DOUBLE BALANCED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 20; Package Body Material: PLASTIC/EPOXY; Technology: BICMOS; Maximum Input Power (CW): 20 dBm;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
LTC5541IUH#PBF
Linear Technology
DOUBLE BALANCED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 20; Package Body Material: PLASTIC/EPOXY; Technology: CMOS; Maximum Operating Temperature: 85 Cel;
LTC5541IUH#PBF by Analog Devices is a RF/Microwave Mixer with 15 dBm CW input power, operating from -40 to 85 °C. It features double balanced construction, 50 ohm impedance, and operates b/w 1300-2300 MHz. Ideal for applications requiring high-frequency signal mixing in various RF systems.
LTC5541IUH#TRPBF
LTC5541IUH#TRPBF by Analog Devices is a RF/Microwave Mixer with 15 dBm CW input power, operating from -40 to 85°C. It features double balanced construction, 50 ohm impedance, and operates b/w 1300-2300 MHz. Ideal for applications requiring high frequency mixing in RF systems.
LTC5549IUDB#TRMPBF
LTC5549IUDB#TRMPBF by Analog Devices is a RF/Microwave Mixer with 20 dBm CW input power, operating from -40 to 105 °C. It features double balanced design, 50 ohm impedance, and operates b/w 2-14 GHz. Ideal for high-frequency applications in communications and radar systems.
DOUBLE BALANCED; Construction: COMPONENT; Minimum Operating Frequency: 2000 MHz; Maximum Input Power (CW): 20 dBm; Characteristic Impedance: 50 ohm; JESD-609 Code: e3;
LTC5577IUF#PBF
DOUBLE BALANCED; JESD-609 Code: e3; Terminal Finish: Matte Tin (Sn);
LTC5549IUDB#PBF
DOUBLE BALANCED; Maximum Operating Frequency: 14000 MHz; Construction: COMPONENT; Maximum Input Power (CW): 20 dBm; Additional Features: CMOS COMPATIBLE; Characteristic Impedance: 50 ohm;
DOUBLE BALANCED; Terminal Finish: Matte Tin (Sn) - annealed; Additional Features: CMOS COMPATIBLE; Construction: COMPONENT; JESD-609 Code: e3; Maximum Input Power (CW): 20 dBm;
LTC5549IUDB#TRPBF
DOUBLE BALANCED; Minimum Operating Temperature: -40 Cel; Minimum Operating Frequency: 2000 MHz; Characteristic Impedance: 50 ohm; Additional Features: CMOS COMPATIBLE; JESD-609 Code: e3;
DOUBLE BALANCED; Maximum Operating Temperature: 105 Cel; Construction: COMPONENT; Minimum Operating Temperature: -40 Cel; Minimum Operating Frequency: 2000 MHz; Maximum Input Power (CW): 20 dBm;
LTC5553IUDB#TRMPBF
DOUBLE BALANCED; Minimum Operating Temperature: -40 Cel; Maximum Operating Frequency: 20000 MHz; Characteristic Impedance: 50 ohm; Minimum Operating Frequency: 3000 MHz; Maximum Input Power (CW): 20 dBm;
DOUBLE BALANCED; Maximum Operating Temperature: 105 Cel; Minimum Operating Frequency: 3000 MHz; Terminal Finish: MATTE TIN; Minimum Operating Temperature: -40 Cel; Maximum Operating Frequency: 20000 MHz;
LTC5510IUF#PBF
DOUBLE BALANCED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 16; Package Body Material: PLASTIC/EPOXY; Technology: CMOS; Package Equivalence Code: LCC16,.16SQ,25;
LTC5510IUF#PBF by Analog Devices is a RF/Microwave Mixer with max input power of 15 dBm, operating freq range of 1-6000 MHz, and characteristic impedance of 50 ohm. It is ideal for applications requiring high frequency mixing such as wireless communication systems and radar systems.
LTC5552IUDB#TRMPBF
DOUBLE BALANCED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 12; Package Body Material: PLASTIC/EPOXY; Package Equivalence Code: LCC12,.08X.12,20; Maximum Supply Current: 150 mA;
DOUBLE BALANCED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 12; Package Body Material: PLASTIC/EPOXY; Maximum Operating Frequency: 20000 MHz; Characteristic Impedance: 50 ohm;
LTC5562IUC#TRMPBF
LTC5562IUC#TRMPBF by Analog Devices is a RF/Microwave Mixer with 10 terminals, operating from 0.03 MHz to 7000 MHz. It has a max input power of 15 dBm and operates at temperatures ranging from -40°C to 105°C. Ideal for applications requiring double balanced RF or microwave devices in surface mount construction.
LTC5577IUF#TRPBF
DOUBLE BALANCED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 16; Package Body Material: PLASTIC/EPOXY; Maximum Operating Frequency: 8000 MHz; Characteristic Impedance: 50 ohm;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved