Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
LTC5576IUF#PBF by Analog Devices is a RF/Microwave Mixer with 15 dBm CW input power, operating from 3.3/5V supplies. It features double balanced design, 50 ohm impedance, and operates b/w 3-8 GHz. Ideal for applications requiring high frequency mixing in components assembly.
Median Price
$17.195
Lifecycle Status
Suppliers In-Stock
13
In-Stock Inventory
1k+
Analog Devices Inc
1+ parts
$20.330
100+ parts
-
1k+ parts
$11.250
10k+ parts
Newark
$20.940
$16.830
$15.530
DigiKey
$23.480
$16.474
$15.386
Mouser Electronics
$15.980
$15.740
Verical
$12.097
Arrow
$11.486
$11.419
Chip1Stop
$12.302
Rochester
$14.060
$12.580
$11.840
Vyrian
$11.270
Digiode
$12.901
Chip Stock
Anansix
Nova Conductors
MARBEL Systems
$0.914
Texas Native Microelectronics
$1.051
$1.009
$0.977
$0.925
Kenton Components
$1.261
$1.110
Parana Technologies
$1.907
$1.774
IDEA Electronic Components Group
$2.051
$1.948
Qasali Group International
$2.838
$2.639
$2.497
DigiPath Technology Company
$3.200
$3.072
Ampacity Inc.
$9.580
Semicontronic
$9.340
$9.293
Corphita
$12.222
Corohmni
$13.884
Continental Prestige Electronics
$17.560
$13.540
Argo Parts USA
Aranea Global
Perfect Parts
The use of plastic/epoxy material ensures lightweight construction and high durability, making it suitable for various applications.
With a high maximum input power handling capacity, this product can withstand strong signals without distortion or damage.
Compatible with common voltage supplies, providing flexibility in power source selection for the system.
Having 16 terminals allows for multiple connections and enhanced signal processing capabilities.
With a high maximum operating temperature, this mixer can withstand demanding environmental conditions and maintain reliable performance.
The wide operating temperature range ensures usability in extreme cold conditions, making it suitable for various outdoor applications.
Matte tin finish offers good conductivity and corrosion resistance for long-term stability and performance.
With a moderate supply current requirement, this mixer is power-efficient and suitable for portable or low-power applications.
Double balanced configuration helps minimize unwanted harmonics and improve signal purity in mixing applications.
The standard 50 ohm impedance ensures compatibility with a wide range of RF systems and components for seamless integration.
Supports operation at lower frequencies for a versatile performance range in various communication or signal processing systems.
Surface mount design facilitates easy and efficient installation on circuit boards, saving space and simplifying assembly processes.
With high-frequency capability, this mixer is suitable for applications requiring processing of high-frequency RF or microwave signals.
RF/Microwave Mixers LTC5576IUF#PBF attributes and parameters. Explore more RF/Microwave Mixers devices from Analog Devices
Characteristic Impedance:
Construction:
Maximum Input Power (CW):
JESD-609 Code:
Mounting Feature:
No. of Terminals:
Maximum Operating Frequency:
Minimum Operating Frequency:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Equivalence Code:
Power Supplies (V):
RF or Microwave Device Type:
Maximum Supply Current:
Terminal Finish:
LTC5576IUF#PBF RF & Microwave trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
Analog Devices Inc. (ADI) is one of the leading companies in the areas of integrated circuit (IC) design, manufacturing, testing, and marketing. ADI is known for their high-performance semiconductor solutions which enable customers to create innovative systems that solve critical challenges. The company has over 40 years of experience in the industry and has been consistently recognized as an industry leader for its innovation as well as its commitment to quality products and services. They have garnered numerous awards throughout the years including awards from Gartner Magic Quadrant for Industrial IoT Platforms; Frost & Sullivan’s Global Product Leadership Award; and various awards relating to automotive safety technology such as JESD209-3 Automotive Grade Certifications from AEC-Q100.
CEO
Vincent Roche
Interim CFO
James Mollica
CAO
Michael Sondel
Limerick Fab
Fabrication
Fab Initiation
1977
Ireland
Limerick
Wafer Capacity
30,000
Hillview Fab
2001
USA
Milpitas
15,000
Wilmington Fab
1967
Wilmington
50,000
Camas Fab
1997
Camas
18,000
Beaverton-Portland
1987
Beaverton
14,000
NDT2955
Onsemi
NDT2955 by Onsemi is a P-CHANNEL FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features a max IDM of 15A and EAS of 174mJ, suitable for ENHANCEMENT MODE operation. With a compact SMALL OUTLINE package and -55 to 150 °C operating range, it offers efficient power dissipation up to 3W.
1N4148W-7-F
Multicomp Pro
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
FDC5614P
MSKSEMI SEMICONDUCTOR
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 2 W; Transistor Element Material: SILICON; Minimum DS Breakdown Voltage: 60 V;
SMBJ18CA
Semtech
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SN65HVD230DR
Texas Instruments
SN65HVD230DR by Texas Instruments is a BICMOS technology interface circuit with 1Mbps data rate, suitable for industrial applications. It operates at 3.3V, has 8 terminals in a small outline package, and can withstand temperatures from -40 to 85°C.
LM317T
Samsung
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Load Regulation (%): 1.5 %; Operating Temperature (TJ-Min): 0 Cel; Maximum Line Regulation (%/V): .07;
1N4148WT
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SS14
Microsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Promax-johnton
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Terminal Form: GULL WING; Maximum Drain-Source On Resistance: 7.5 ohm; Minimum DS Breakdown Voltage: 60 V;
1N4148
Tak Cheong Electronics Holdings
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
C0603X104K5RACAUTO
KEMET Corporation
C0603X104K5RACAUTO by KEMET Corp is a ceramic capacitor with capacitance of 0.1 uF and rated DC voltage of 50 V. It has a temperature coefficient of 15% and can operate b/w -55 to 125 °C. This SMT package is commonly used in automotive applications due to its AEC-Q200 reference standard.
BAV99
Philips Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
International Devices
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Semitronics
CRG0805F10R
TE Connectivity
TE Connectivity's CRG0805F10R is a 10 ohm fixed resistor with 1% tolerance and 0.125 W power dissipation. It features thick film technology, SMT package style, and matte tin over nickel terminal finish. Ideal for surface mount applications in electronics, offering a temperature coefficient of 200 ppm/°C and operating voltage of 150 V.
LM107H/883C
National Semiconductor
LM107H/883C by National Semiconductor is a MILITARY-grade Operational Amplifier with +-5/+-15V supplies. Featuring 2000uV max input offset voltage, it operates from -55 to 125 °C. Ideal for applications requiring VOLTAGE-FEEDBACK architecture and frequency compensation.
Aeroflex/metelics
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Package Shape: ROUND; Transistor Application: SWITCHING;
LM555CN
Rca Solid State
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
M39029/56351
Souriau-sunbank Connection Technologies
Souriau-sunbank's M39029/56351 is a CRIMP contact type backshell accessory compliant with MIL-DTL-38999. It features FEMALE gender contacts, compatible with M39029/58363 mating contacts. The insertion and removal tools required are M81969/14-10 and M22520/2-10 respectively, making it ideal for military connector applications.
1N4148WS
HMC622LP4ERTR
Analog Devices
Analog Devices' HMC622LP4ERTR is a GAAS RF/Microwave Mixer with 24 terminals, operating from -40 to 85°C. It requires a 5V power supply, drawing a max of 220mA. This surface-mount device is ideal for applications requiring high-frequency signal mixing in various electronic systems.
HMC488MS8GE
Analog Devices' HMC488MS8GE is a RF/Microwave Mixer with 50 ohm impedance, operating from 4-7 GHz. It offers a max conversion loss of 10.5 dB and can handle up to 13 dBm CW input power. Ideal for high-frequency applications requiring double balanced mixers.
SPM5001
RF/Microwave Mixers; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Package Body Material: PLASTIC/EPOXY; Package Equivalence Code: FL6,.07,25;
AD8344ACPZ
AD8344ACPZ by Analog Devices is a RF/Microwave Mixer with 16 terminals, operating at -40 to 85°C. It uses 5V power supply, bipolar technology, and surface mounting feature. Ideal for applications requiring high-frequency signal processing in various electronic systems.
HMC525ALC4
HMC525ALC4 by Analog Devices is a RF/Microwave Mixer with 24 terminals, operating from -40 to 85 °C. Featuring GaAs technology, it has a frequency range of 4-8500 MHz and conversion loss of 11 dB. Ideal for applications requiring high input power handling up to 20 dBm in a ceramic package.
HMC521ALC4TR-R5
Analog Devices' HMC521ALC4TR-R5 is an RF/Microwave Mixer with 20 dBm CW input power, 9.5 dB conversion loss, and 50 ohm impedance. It operates b/w -40°C to 85°C, suitable for applications requiring image rejection in the frequency range of 8.5-13.5 GHz.
LTC5556IUH#TRMPBF
LTC5556IUH#TRMPBF by Analog Devices is a RF/Microwave Mixer with 20 dBm CW input power, 3.3V supply, and 32 terminals. It operates from -40 to 105 °C, has a max current of 450mA, and covers frequencies from 1.5 to 7GHz. Ideal for single balanced RF/microwave applications in surface mount setups.
AD8343ARU-REEL7
AD8343ARU-REEL7 by Analog Devices is a RF/Microwave Mixer with 14 terminals, operating from -40 to 85°C. It has a VSWR of 2, operates at frequencies up to 2500 MHz, and requires a 5V power supply. Ideal for applications requiring double balanced mixers in the RF/microwave domain.
SA611DH
NXP Semiconductors
DOUBLE BALANCED; Maximum Operating Temperature: 85 Cel; Maximum Input Power (CW): 20 dBm; Maximum Operating Frequency: 1000 MHz; Minimum Operating Frequency: 800 MHz; Minimum Operating Temperature: -40 Cel;
LTC5549IUDB#PBF
LTC5549IUDB#PBF by Analog Devices is a RF/Microwave Mixer with 20 dBm CW input power, operating from -40 to 105 °C. It features double balanced construction, 50 ohm impedance, and operates b/w 2-14 GHz. Ideal for high-frequency applications requiring precise signal mixing in various electronic systems.
HMC220AMS8TR
Analog Devices' HMC220AMS8TR is a GAAS double balanced RF mixer with 8 terminals. It offers a max conversion loss of 10.5 dB and operates b/w -40 °C to 85°C. Ideal for RF/microwave applications, this surface mount device is housed in a plastic/epoxy package body.
TFF1013HN/N1,115
TFF1013HN/N1,115 by NXP Semiconductors is an RF/microwave mixer designed for surface mount applications. It operates b/w -40 °C and 85 °C with a 5V power supply and features 16 terminals. Ideal for communication systems, it ensures reliable performance in various environments.
HMC260LC3B
Analog Devices' HMC260LC3B is a RF/Microwave Mixer with GaAs technology. It operates from 14 GHz to 26 GHz, offering a max conversion loss of 12 dB and can handle up to 15 dBm CW input power. Ideal for applications requiring high-frequency signal mixing in a compact surface-mount package.
AMMP-6545-BLKG
Broadcom
AMMP-6545-BLKG by Broadcom is a RF/Microwave Mixer with 8 terminals. It operates from 18-40 GHz, offering a max conversion loss of 12 dB. Suitable for high-frequency applications, it can handle up to 25 dBm CW input power and has a temperature range of -55 to 125°C.
HMC260
Analog Devices' HMC260 is a GAAS double balanced RF mixer with 50 ohm impedance. It operates from 14-26 GHz, handles up to 15 dBm CW power, and has a max conversion loss of 10.5 dB. Ideal for RF/microwave applications requiring high performance in extreme temperature conditions.
ADL5355XCPZ-R7
ADL5355XCPZ-R7 by Analog Devices is a RF/Microwave Mixer with double balanced type, 50 ohm impedance, operating from -40 °C to 85°C. It operates b/w 1200 MHz to 2500 MHz making it suitable for various RF applications requiring high frequency mixing capabilities.
HMC338LC3BTR
Analog Devices' HMC338LC3BTR is a GAAS RF/Microwave Mixer with 12 terminals, operating from -40 to 85°C. It requires a 4V power supply and draws a max current of 40mA. Ideal for surface mount applications due to its ceramic package body material and double balanced technology.
HMC140
Analog Devices' HMC140 is a GAAS double balanced RF/Microwave Mixer with 12 dB max conversion loss. Operating from -55 °C to 125°C, it covers 1-2 GHz range. Ideal for applications requiring high frequency signal mixing in harsh environments.
HMC264LM3TR
Analog Devices' HMC264LM3TR is a GAAS RF/Microwave Mixer with 6 terminals, operating from -40 to 85 °C. It features a double balanced design, 50 ohm impedance, and operates b/w 20-30 GHz. Ideal for surface mount applications requiring a power supply of 3/4V.
CM-1
Sirenza Microdevices
DOUBLE BALANCED; Maximum Operating Frequency: 500 MHz; Minimum Operating Temperature: -54 Cel; Construction: COMPONENT; Characteristic Impedance: 50 ohm; Minimum Operating Frequency: .5 MHz;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
ADMV8420ACPZ
Analog Devices' ADMV8420ACPZ is a 24-terminal BAND PASS FILTER with a Center Frequency of 15500 MHz and Input Impedance of 50Ω. Operating b/w -40°C to 85°C, it's ideal for applications requiring precise filtering in electronic systems.
AD3542RBCPZ16
AD3542RBCPZ16 by Analog Devices is a 16-bit D/A converter with max analog output voltage of 7.5V and linearity error of 0.006103%. It features a nominal settling time of 0.1us, making it ideal for applications requiring precise analog signal generation in temperature-sensitive environments. With a compact square package shape and surface mount capability, this chip carrier is suitable for space-constrained designs where high performance is essential.
ADPA7005CHIP
ADPA7005CHIP by Analog Devices is a wide band medium power RF amplifier with 11.5 dB gain, operating from 20-44 GHz. It can handle up to 27 dBm CW input power and operates in temperatures ranging from -55 °C to 85°C. Ideal for applications requiring high frequency amplification in RF & microwave systems.
AD3542RBCPZ16-RL7
AD3542RBCPZ16-RL7 by Analog Devices is a 16-bit D/A converter with max analog output voltage of 7.5V, 0.006103% linearity error, and 0.1us settling time. Ideal for applications requiring precise analog signal generation in temperature-sensitive environments.
ADN4693E-1BCPZ
ADN4693E-1BCPZ by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3.3V nominal voltage. It features a max transmit delay of 2.4ns and differential output for EIA/TIA-899 interface standard applications in industrial settings.
ADAQ23876BBCZ
Analog Devices' ADAQ23876BBCZ is a 16-bit ADC with 0.00125% EL, 15 MHz sample rate, and 2'S COMPLEMENT BINARY output. Ideal for wireless data acquisition applications due to its compact GRID ARRAY package and fast 0.063 us conversion time. Operating from -40 to 85 °C, it offers precise analog-to-digital conversion in a small form factor.
ADPA7005AEHZ
ADPA7005AEHZ by Analog Devices is a wide band medium power RF amplifier with 12 dB gain. It operates b/w 18-44 GHz, handling up to 27 dBm CW input power. Ideal for applications requiring high frequency amplification in temperatures ranging from -40 to 85°C.
ADN4693E-1BCPZ-RL7
ADN4693E-1BCPZ-RL7 by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3.3V. It offers a max transmit delay of 2.4ns and max supply current of 24mA. Ideal for applications requiring differential output and EIA/TIA interface standards compliance in tight spaces due to its very thin profile chip carrier package style.
ADPA7005AEHZ-R7
ADPA7005AEHZ-R7 by Analog Devices is a wide band medium power RF amplifier with 12 dB gain, operating from 18-44 GHz. It can handle up to 27 dBm CW input power and operates in temperatures ranging from -40 °C to 85°C. Ideal for applications requiring high frequency amplification in RF & microwave systems.
ADMV8420ACPZ-R5
ADMV8420ACPZ-R5 by Analog Devices is a 24-terminal BAND PASS FILTER with a Center Frequency of 15500 MHz and Input Impedance of 50 OHM. It operates b/w -40 to 85 °C and is ideal for applications requiring precise frequency filtering in electronic circuits.
LTC5541IUH#PBF
Linear Technology
DOUBLE BALANCED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 20; Package Body Material: PLASTIC/EPOXY; Technology: CMOS; Maximum Operating Temperature: 85 Cel;
LTC5541IUH#PBF by Analog Devices is a RF/Microwave Mixer with 15 dBm CW input power, operating from -40 to 85 °C. It features double balanced construction, 50 ohm impedance, and operates b/w 1300-2300 MHz. Ideal for applications requiring high-frequency signal mixing in various RF systems.
LTC5541IUH#TRPBF
DOUBLE BALANCED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 20; Package Body Material: PLASTIC/EPOXY; Technology: CMOS; Maximum Input Power (CW): 15 dBm;
LTC5541IUH#TRPBF by Analog Devices is a RF/Microwave Mixer with 15 dBm CW input power, operating from -40 to 85°C. It features double balanced construction, 50 ohm impedance, and operates b/w 1300-2300 MHz. Ideal for applications requiring high frequency mixing in RF systems.
LTC5549IUDB#TRMPBF
LTC5549IUDB#TRMPBF by Analog Devices is a RF/Microwave Mixer with 20 dBm CW input power, operating from -40 to 105 °C. It features double balanced design, 50 ohm impedance, and operates b/w 2-14 GHz. Ideal for high-frequency applications in communications and radar systems.
DOUBLE BALANCED; Construction: COMPONENT; Minimum Operating Frequency: 2000 MHz; Maximum Input Power (CW): 20 dBm; Characteristic Impedance: 50 ohm; JESD-609 Code: e3;
LTC5577IUF#PBF
DOUBLE BALANCED; JESD-609 Code: e3; Terminal Finish: Matte Tin (Sn);
DOUBLE BALANCED; Maximum Operating Frequency: 14000 MHz; Construction: COMPONENT; Maximum Input Power (CW): 20 dBm; Additional Features: CMOS COMPATIBLE; Characteristic Impedance: 50 ohm;
DOUBLE BALANCED; Terminal Finish: Matte Tin (Sn) - annealed; Additional Features: CMOS COMPATIBLE; Construction: COMPONENT; JESD-609 Code: e3; Maximum Input Power (CW): 20 dBm;
LTC5549IUDB#TRPBF
DOUBLE BALANCED; Minimum Operating Temperature: -40 Cel; Minimum Operating Frequency: 2000 MHz; Characteristic Impedance: 50 ohm; Additional Features: CMOS COMPATIBLE; JESD-609 Code: e3;
DOUBLE BALANCED; Maximum Operating Temperature: 105 Cel; Construction: COMPONENT; Minimum Operating Temperature: -40 Cel; Minimum Operating Frequency: 2000 MHz; Maximum Input Power (CW): 20 dBm;
LTC5553IUDB#TRMPBF
DOUBLE BALANCED; Minimum Operating Temperature: -40 Cel; Maximum Operating Frequency: 20000 MHz; Characteristic Impedance: 50 ohm; Minimum Operating Frequency: 3000 MHz; Maximum Input Power (CW): 20 dBm;
DOUBLE BALANCED; Maximum Operating Temperature: 105 Cel; Minimum Operating Frequency: 3000 MHz; Terminal Finish: MATTE TIN; Minimum Operating Temperature: -40 Cel; Maximum Operating Frequency: 20000 MHz;
LTC5510IUF#PBF
DOUBLE BALANCED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 16; Package Body Material: PLASTIC/EPOXY; Technology: CMOS; Package Equivalence Code: LCC16,.16SQ,25;
LTC5510IUF#PBF by Analog Devices is a RF/Microwave Mixer with max input power of 15 dBm, operating freq range of 1-6000 MHz, and characteristic impedance of 50 ohm. It is ideal for applications requiring high frequency mixing such as wireless communication systems and radar systems.
LTC5552IUDB#TRMPBF
DOUBLE BALANCED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 12; Package Body Material: PLASTIC/EPOXY; Package Equivalence Code: LCC12,.08X.12,20; Maximum Supply Current: 150 mA;
DOUBLE BALANCED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 12; Package Body Material: PLASTIC/EPOXY; Maximum Operating Frequency: 20000 MHz; Characteristic Impedance: 50 ohm;
LTC5562IUC#TRMPBF
LTC5562IUC#TRMPBF by Analog Devices is a RF/Microwave Mixer with 10 terminals, operating from 0.03 MHz to 7000 MHz. It has a max input power of 15 dBm and operates at temperatures ranging from -40°C to 105°C. Ideal for applications requiring double balanced RF or microwave devices in surface mount construction.
LTC5577IUF#TRPBF
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved