Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
POWER SUPPLY SUPPORT CIRCUIT; Temperature Grade: INDUSTRIAL; No. of Terminals: 12; Package Code: TSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
Median Price
$10.540
Lifecycle Status
Suppliers In-Stock
14
In-Stock Inventory
1k+
Verical
1+ parts
$6.458
100+ parts
-
1k+ parts
10k+ parts
Farnell
$9.350
$8.050
$6.090
$5.300
Arrow
$10.281
$8.785
$7.056
$6.405
Chip1Stop
$10.800
$7.600
$7.050
DigiKey
$12.520
$8.936
$7.866
$7.694
Mouser Electronics
$12.900
$9.210
$8.100
Element14
$979.640
$843.990
$638.150
$555.810
Richardson RFPD
$7.490
Nova Conductors
$7.773
Digiode
$8.882
Chip Stock
Anansix
Vyrian
Component Sense
Aztec Data Supply Inc.
$6.040
Corohmni
$6.850
Advanced Electronics
$6.703
Ampacity Inc.
$7.950
Semicontronic
$7.751
$7.712
Parana Technologies
$8.061
$7.497
Corphita
$8.415
IDEA Electronic Components Group
$8.668
$8.235
Continental Prestige Electronics
$10.400
$7.780
$5.900
DigiPath Technology Company
$13.522
$12.981
MARBEL Systems
$20.651
Texas Native Microelectronics
$23.737
$20.889
Kenton Components
$28.484
$25.066
Qasali Group International
$64.090
RC Electronics
Robosynatics
Lucentia Tech
$6.713
$6.576
Futuretech Components
Argo Parts USA
Netroflash
$7.617
$7.384
$7.228
Perfect Parts
Power Management ICs LTC2945IMS#PBF attributes and parameters. Explore more Power Management ICs devices from Linear Technology
Adjustable Threshold:
Other IC type:
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Channels:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Power Supplies (V):
Qualification:
Maximum Seated Height:
Sub-Category:
Maximum Supply Current (Isup):
Maximum Supply Voltage (Vsup):
Minimum Supply Voltage (Vsup):
Nominal Supply Voltage (Vsup):
Surface Mount:
Technology:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Width (mm):
LTC2945IMS#PBF Other Function Semiconductors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Design/Specification - Die Chg 04/May/2016 Mult Dev Mark Chg 4/Feb/2020
U.S. In July 2016, Analog Devices agreed to buy Linear Technology for 14.8 billion dollars. This acquisition was finalized on March 10, 2017. The Linear name survives as the "Power by Linear" brand that is used to market the combined power management portfolios of Linear Technology and Analog Devices.
BAV99
Won-top Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WT
Onsemi
1N4148WT by Onsemi is a single rectifier diode with a max output current of 0.3A and forward voltage of 0.72V. It has a small outline package style, matte tin terminal finish, and operates at temperatures up to 150°C. Ideal for applications requiring fast reverse recovery time such as power supplies and signal demodulation circuits.
1N4148
Toshiba
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM7805CT
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;
Terry Semiconductor
RECTIFIER DIODE; Surface Mount: NO; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; JESD-609 Code: e0; Maximum Repetitive Peak Reverse Voltage: 100 V;
LM555CM
Texas Instruments
LM555CM by Texas Instruments is an Analog Waveform Generation IC with a supply voltage range of 4.5V to 16V and max operating temperature of 70°C. It comes in a small outline package, suitable for applications requiring pulse generation or rectangular waveform outputs. With surface mount capability and low supply current of 15mA, it is ideal for commercial-grade electronic circuits.
FT232RQ-REEL
FTDI
FTDI's FT232RQ-REEL is a USB bus controller with 32 terminals, operating at 3.3-5.25V. It supports data transfer rates up to 60MBps and clock frequency of 12.02MHz, suitable for RS232/RS422/RS485 interfaces in various applications like industrial automation and communication systems.
Frontier Electronics
LM358MX
LM358MX by Texas Instruments is a dual operational amplifier with a max input offset voltage of 9000 uV. It has a nominal voltage of 5V and a min voltage gain of 15000. This op amp is commonly used in applications requiring amplification and signal conditioning.
2N7002-7-F
Diodes Incorporated
Diodes Inc. 2N7002-7-F is a N-channel FET with 60V DS breakdown voltage, 0.115A max drain current, and 13.5 ohm RDS(on). Ideal for switching applications in enhancement mode operation. Features Gull Wing terminals, small outline package style, and operates up to 150°C.
LM317D2TG
LM317D2TG by Onsemi is an adjustable positive single output standard regulator with a max output current of 1.5A and a max output voltage of 37V. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
1N4148WS
Rectron
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Allegro MicroSystems
RECTIFIER DIODE; Terminal Position: END; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
FDV303N
FDV303N by Onsemi is a N-CHANNEL FET with 25V DS Breakdown Voltage, 0.68A Drain Current, and 0.45 ohm On Resistance. Ideal for SWITCHING applications, it operates in ENHANCEMENT MODE at temperatures ranging from -55 to 150°C. Package style is SMALL OUTLINE with GULL WING terminals for surface mount assembly.
M39029/58-360
Glenair
CONNECTOR ACCESSORY; Contact Gender: MALE; Material: COPPER ALLOY; IEC Conformity: NO; MIL-Connector Accessory Name: CONTACT; MIL Conformity: YES;
2N2222A
Solid State Devices
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Continental Device India
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Vishay Sprague
NPN; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; JEDEC-95 Code: TO-18; Maximum Collector-Emitter Voltage: 40 V;
International Devices
ECA2DHG4R7
Panasonic
ECA2DHG4R7 by Panasonic is a 4.7uF aluminum electrolytic capacitor with 200V rated DC voltage. It features tan delta of 0.15, leakage current of 0.0664mA, and ripple current of 50mA, making it ideal for applications requiring high capacitance stability and low leakage in through-hole mounting setups at temperatures ranging from -25 to 105°C.
BTS4142N
Infineon Technologies
BTS4142N by Infineon Technologies is a MOS Power Management IC with 4 terminals, operating voltage range of 12-45V. AEC-Q100 screened for automotive applications, it has a compact rectangular package suitable for power supply support circuits. With a temperature range of -40 to 125°C and small outline design, it offers reliable performance in various environments.
TPS2051BDGNRG4
TPS2051BDGNRG4 by Texas Instruments is a Power Management IC with 8 terminals, operating at temperatures from -40 to 85°C. It supports a supply voltage range of 2.7V to 5.5V and has a max supply current of 0.07mA. This IC is ideal for industrial applications requiring power supply support circuits in compact spaces.
LTC2955ITS8-1#TRMPBF
Analog Devices
LTC2955ITS8-1#TRMPBF by Analog Devices is a Power Management IC with Vsup range of 1.5V to 36V, operating temp from -40°C to 85°C, and adjustable threshold feature. It is used in industrial applications for power supply support circuits due to its small outline package and dual terminal position.
LTC4041EUFD#PBF
LTC4041EUFD#PBF by Analog Devices is a Power Management IC with 24 terminals, operating b/w -40 to 125 °C. It supports supply voltages from 2.9V to 5.5V and features an adjustable threshold for automotive applications. The package style is chip carrier with a very thin profile, suitable for surface mount assembly.
TPS26621DRCT
TPS26621DRCT by Texas Instruments is a Power Management IC with a 24V nominal voltage, 0.88A max output current, and 60V max supply voltage. It is designed for automotive applications and features a small outline package with heat sink/slug and very thin profile suitable for surface mount assembly.
LTC4368IMS-2#PBF
LTC4368IMS-2#PBF by Analog Devices is a Power Management IC with 10 terminals, operating voltage range of 2.5V to 60V, and adjustable threshold feature. It is designed for industrial applications, offering a small outline package style suitable for surface mount assembly in power supply support circuits. The IC has a temperature range from -40°C to 85°C and features CMOS technology with dual terminal position.
PTN5150AHXMP
NXP Semiconductors
PTN5150AHXMP by NXP Semiconductors is a Power Management IC with 12 terminals, operating at -40 to 85°C. It supports a supply voltage range of 2.7V to 5.5V and has an adjustable threshold of +5V. This chip carrier is ideal for industrial applications requiring power supply support circuits in compact spaces.
PTPS16632RGET
POWER SUPPLY SUPPORT CIRCUIT;
LTC4368IDD-2#PBF
LTC4368IDD-2#PBF by Analog Devices is a Power Management IC with 10 terminals, operating temperature range of -40 to 85°C, and supply voltage from 2.5V to 60V. It is used in industrial applications for power supply support circuits due to its small outline package and adjustable threshold feature.
TPS65295RJER
TPS65295RJER by Texas Instruments is a Power Management IC with 18 terminals, operating at -40 to 125°C. It supports a supply voltage range of 4.5-16V and has 4 channels for automotive applications. The chip carrier package is surface-mountable and has a compact size of 3x3mm.
MCP73871T-2CCI/ML
Microchip Technology
MCP73871T-2CCI/ML by Microchip Tech is a Power Management IC with 20 terminals, operating temp range of -40 to 85 °C. It has a supply voltage of 4.479-6V and supports power supply circuits. The chip carrier package style makes it suitable for industrial applications requiring precise power management.
BQ24075QRGTRQ1
BQ24075QRGTRQ1 by Texas Instruments is a Power Management IC with 16 terminals, supporting supply voltages from 4.5V to 6.3V. It operates in automotive-grade temperatures (-40°C to 125°C) and has an adjustable threshold of +6.6V, making it ideal for power supply support circuits in various applications.
MC32PF3000A1EPR2
MC32PF3000A1EPR2 by NXP Semiconductors is a 48-terminal Power Management IC with a nominal voltage of 3.6V, suitable for industrial applications. It features a max operating temperature of 85°C, MOS technology, and adjustable threshold capability for power supply support circuits.
LM5069MMX-1/NOPB
LM5069MMX-1/NOPB by Texas Instruments is a Power Management IC with 48V nominal voltage and 500A max output current. It features a small outline package, matte tin terminal finish, and automotive temperature grade. Ideal for power supply support circuits in applications requiring high voltage and low power consumption.
MAX14690AEWX+
Maxim Integrated
POWER SUPPLY SUPPORT CIRCUIT; Temperature Grade: INDUSTRIAL; No. of Terminals: 36; Package Code: VFBGA; Package Shape: RECTANGULAR; Surface Mount: YES;
LTC2945HUD-1#PBF
Linear Technology
POWER SUPPLY SUPPORT CIRCUIT; Temperature Grade: AUTOMOTIVE; No. of Terminals: 12; Package Code: HVQCCN; Package Shape: SQUARE; Surface Mount: YES;
TPS2042BDGN
TPS2042BDGN by Texas Instruments is a Power Management IC with 8 terminals, operating at -40 to 85°C. It supports a supply voltage range of 2.7V to 5.5V and has a max supply current of 0.09mA. Ideal for industrial applications requiring power supply support circuits in compact spaces.
LTC4367IDD-1#PBF
LTC4367IDD-1#PBF by Analog Devices is a Power Management IC with 8 terminals, operating temperature range of -40 to 85°C, and adjustable threshold. It supports power supply circuits in industrial applications, with a package style of small outline and very thin profile for surface mount assembly.
PTPS25750DRJKT
PTPS25750DRJKT by Texas Instruments is a Power Management IC with 38 terminals, operating b/w -40°C to 125°C. It supports a nominal voltage of 3.3V and has an adjustable threshold feature. Ideal for automotive applications due to its temperature grade and surface mount capability in a rectangular package shape.
LM74502HDDFR
LM74502HDDFR by Texas Instruments is a Power Management IC with 8 terminals, operating b/w -40 to 125°C. It supports supply voltages from 3.2V to 65V and has an adjustable threshold of +2.8V, making it ideal for power supply support circuits in various applications.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
LTC2945HMS#PBF
LTC2945HMS#PBF by Analog Devices is a Power Management IC with 12 terminals, operating from -40 to 125 °C. It supports supply voltages from 4V to 80V and has an adjustable threshold feature. Ideal for automotive applications due to its CMOS technology and compact design.
POWER SUPPLY SUPPORT CIRCUIT; Temperature Grade: AUTOMOTIVE; No. of Terminals: 12; Package Code: TSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LTC2945IMS#PBF
LTC2945IMS#PBF by Analog Devices is a Power Management IC with 12 terminals, operating b/w -40 to 85°C. It supports supply voltages from 2.7V to 80V and has an adjustable threshold feature. Ideal for industrial applications requiring precise power monitoring in compact spaces.
LTC2945IUD#PBF
LTC2945IUD#PBF by Analog Devices is a Power Management IC with 12 terminals, operating from -40 to 85°C. It supports supply voltages from 2.7V to 80V and has an adjustable threshold feature. This CMOS technology chip is ideal for industrial applications requiring precise power monitoring in compact spaces.
POWER SUPPLY SUPPORT CIRCUIT; Temperature Grade: INDUSTRIAL; No. of Terminals: 12; Package Code: HVQCCN; Package Shape: SQUARE; Surface Mount: YES;
LTC2945IMS#TRPBF
LTC2945IMS#TRPBF by Analog Devices is a Power Management IC with 12 terminals, operating from -40 to 85°C. It supports supply voltages from 2.7V to 80V and has an adjustable threshold feature. Ideal for industrial applications requiring precise power monitoring in compact spaces.
LTC2945HUD#PBF
LTC2945HUD#PBF by Analog Devices is a Power Management IC with 12 terminals, operating b/w -40 to 125 °C. It has a nominal voltage of 5 V and supports power supply circuits. The chip carrier package style with matte tin finish makes it suitable for automotive applications.
LTC2955IDDB-1#TRMPBF
LTC2955IDDB-1#TRMPBF by Analog Devices is a Power Management IC with 10 terminals, operating from -40 to 85°C. It supports supply voltages from 1.5V to 36V and has an adjustable threshold feature. This IC is ideal for industrial applications requiring precise power supply support circuits in compact spaces.
POWER SUPPLY SUPPORT CIRCUIT; Temperature Grade: INDUSTRIAL; No. of Terminals: 10; Package Code: HVSON; Package Shape: RECTANGULAR; Surface Mount: YES;
LTC2945IMS-1#PBF
LTC2945IMS-1#PBF by Analog Devices is a Power Management IC with 12 terminals, operating b/w -40 to 85°C. It supports supply voltages from 2.7V to 80V and has an adjustable threshold feature. Ideal for industrial applications requiring precise power monitoring in compact spaces.
LTC2945HMS-1#PBF
LTC2945HMS-1#PBF by Analog Devices is a Power Management IC with 12 terminals, operating temperature range of -40 to 125°C, and supply voltage from 4V to 80V. It is designed for automotive applications and features adjustable threshold levels for power supply support circuits.
LTC2945HUD-1#PBF by Analog Devices is a Power Management IC with 12 terminals, operating from -40 to 125 °C. It has a supply voltage range of 4-80 V and adjustable threshold feature. Ideal for automotive applications due to its CMOS technology and compact chip carrier package style.
LTC2945CMS#PBF
LTC2945CMS#PBF by Analog Devices is a Power Management IC with 12 terminals, operating b/w 0-70°C. It supports supply voltages from 2.7V to 80V and has an adjustable threshold feature. This IC is ideal for power supply support circuits in various applications due to its compact size and CMOS technology.
POWER SUPPLY SUPPORT CIRCUIT; Temperature Grade: COMMERCIAL; No. of Terminals: 12; Package Code: TSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LTC2945CMS-1#TRPBF
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved