Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
KPTD-3216SRC-PRV by Kingbright Electronic is a 1.6mm SINGLE COLOR LED with peak wavelength of 660nm and max forward current of 0.03A. Ideal for applications requiring SUPER BRIGHT RED illumination, it has a viewing angle of 50° and nominal luminous intensity of 300.0mcd.
Median Price
$0.111
Lifecycle Status
Suppliers In-Stock
6
In-Stock Inventory
1k+
RS (Exports)
1+ parts
-
100+ parts
1k+ parts
10k+ parts
$0.097
ComSIT Distribution GmbH
Vyrian
LIBRA Elektronik GmbH
LittleDiode
Nova Conductors
Aztec Data Supply Inc.
$0.760
Andel Nordic
$10.183
$9.776
Perfect Parts
Glotronic Ltd.
Kepictronics
Bastille Electronics
Single configuration makes it easy to control and integrate into circuits.
Compact size allows for versatile placement and use in various applications.
Low forward current draw ensures energy efficiency and longer lifespan.
Peak wavelength of 660nm provides a vibrant red color output.
Water clear lens ensures maximum light transmission and visibility.
Specifically designed for single color applications, ensuring consistent output.
High maximum operating temperature allows for use in a variety of environments.
Low profile design for easy integration and space saving.
Round shape provides uniform light distribution and aesthetic appeal.
Wide range of operating temperatures suitable for various climate conditions.
Super bright red color adds visibility and attractiveness to the product.
TR packing method ensures secure and safe transportation of the product.
Terminal pitch of 3.75mm provides easy soldering and connection.
Wide viewing angle of 50° allows for increased visibility from different perspectives.
High luminous intensity ensures bright and clear light output.
Surface mount design for easy and secure installation on circuit boards.
Visible LEDs KPTD-3216SRC-PRV attributes and parameters. Explore more Visible LEDs devices from Kingbright Electronic
Color:
Configuration:
Maximum Forward Current:
Lens Type:
Nominal Luminous Intensity (mcd):
Mounting Feature:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Optoelectronic Type:
Height:
Packing Method:
Peak Wavelength (nm):
Shape:
Size:
Terminal Pitch:
Viewing Angle:
KPTD-3216SRC-PRV Optoelectronics trade compliance attributes, and parameters.
HTS
8541.40.20.00
SB
The Kingbright group was founded in 1980 as one of Taiwan’s LED pioneers. Over the last 40 years, we have grown from a small local business to a multi-national enterprise spanning Europe, America, and Asia. Our products are found in computers, consumer electronics, automotive, lighting, and many other applications. The Kingbright brand is trusted by customers world-wide as a world-class manufacturer of LEDs, one of the top-three LED packagers in Taiwan. The group has over 2,000 employees and more than 38,000 sq. meters of automated production facilities. Kingbright people are highly educated (16% with advanced degrees) and experienced (97% of managers with more than 5 years of service). Over the last 40 years of experience in LED design and manufacturing, with support from our loyal customers and suppliers, form the foundation of our competitive strength. Kingbright has five manufacturing plants with a monthly production rate of 800-million LEDs per month. Kingbright maintains the highest quality standards, recognized with ISO 9001 quality, TS 16949 automotive, and ISO 14001 environmental certifications. Our products also carry UL and VDE certifications. The factory is recognized with the BS OHSAS 18001 certificate for employee health and safety, as well as green certifications from Sony and Samsung. The production flow is managed by an advanced Oracle ERP system. Six Sigma management principles guide continuous improvement to the production efficiency and quality.
BSS138BKW,115
NXP Semiconductors
NXP Semiconductors' BSS138BKW,115 is a N-CHANNEL FET with 60V DS breakdown voltage and 0.32A ID. Ideal for SWITCHING applications, it features a built-in diode, 1.6 ohm RDS(on), and operates in ENHANCEMENT MODE. Suitable for surface mount with GULL WING terminals, it meets AEC-Q101 standards.
STM32F407VGT6
STMicroelectronics
STM32F407VGT6 by STMicroelectronics is a 32-bit microcontroller with 2/3.3V power supplies, 196608 bytes RAM, and 16-Ch 12-Bit ADC channels. It is ideal for industrial applications requiring CAN, ETHERNET, I2C(3), SPI(3), UART(2), USB(2) connectivity and features DMA(16) for efficient data transfer. With a max clock frequency of 50 MHz and operating temperature range of -40 to 85 °C, it offers high performance in a compact package style (14mm x 14mm).
1552200253
Molex
WIRE AND CABLE;
2N2222A
Zetex Plc
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
C1210C104K5RACTU
KEMET Corporation
KEMET C1210C104K5RACTU is a ceramic capacitor with 0.1uF capacitance, rated for 50V. It has X7R temperature characteristics and ±10% tolerance, suitable for surface mount applications in a wide temperature range from -55°C to 125°C. Its compact rectangular package makes it ideal for various electronic devices.
Solid State Devices
NUP2105LT1G
Onsemi
NUP2105LT1G by Onsemi is a Transient Suppression Device with 350W power dissipation, 29.1V breakdown voltage, and 44V clamping voltage. Commonly used in electronic circuits for surge protection due to its bidirectional polarity and silicon diode element material.
ULN2803A
YOUTAI SEMICONDUCTOR CO LTD
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 18; Package Code: SOP; Package Shape: RECTANGULAR; JESD-30 Code: R-PDSO-G18;
2N7002
Continental Device India
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .83 W; Package Body Material: PLASTIC/EPOXY; JEDEC-95 Code: TO-236AB;
BAV99
Meritek Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138
Infineon Technologies
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Maximum Drain Current (Abs) (ID): .2 A; Maximum Feedback Capacitance (Crss): 8 pF;
1N4148WS
Vishay Semiconductors
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Leshan Radio
RECTIFIER DIODE; Surface Mount: YES; Maximum Non Repetitive Peak Forward Current: 2 A; Maximum Reverse Recovery Time: .004 us; No. of Phases: 1; Maximum Operating Temperature: 175 Cel;
ATMEGA328P-AU
Microchip Technology
ATMEGA328P-AU by Microchip: 8-bit RISC CPU, 20 MHz clock, 23 I/O lines. Ideal for industrial applications with SPI, TWI, USART connectivity and low power mode. Features include 2048 RAM bytes, 1024 EEPROM size, and 16384 ROM words.
LM107H/883C
Rochester Electronics
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Package Equivalence Code: CAN8,.2;
BAT54SLT1G
BAT54SLT1G by Onsemi is a fast recovery Schottky diode with 2 elements in series connected configuration. It has a max reverse recovery time of 0.005 us and a max forward voltage of 0.8 V. Ideal for applications requiring high-speed rectification, it operates b/w -55 to 150 °C and can handle a max output current of 0.2 A.
LM107H
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Code: TO-99; Package Shape: ROUND;
LL4148-GS08
Vishay Intertechnology
The Vishay Intertechnology LL4148-GS08 is a glass diode with fast recovery time of 0.008 us and max reverse current of 5 uA. Ideal for applications requiring rectification, it has a breakdown voltage of 100 V and can handle a peak forward current of 2 A.
Panasonic
MIXER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Cobham Plc
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Minimum DC Current Gain (hFE): 100; Maximum Turn Off Time (toff): 300 ns;
HLMP-3962
Broadcom
HLMP-3962 by Broadcom is a 5mm single color LED with a peak wavelength of 565nm and a max forward current of 0.03A. It is commonly used in applications that require high performance green lighting.
HSMS-C191
HSMS-C191 by Broadcom is a 1mm SINGLE COLOR LED with peak wavelength of 630nm. It has a max forward current of 0.02A and operates b/w -40 to 85°C. Ideal for applications requiring high efficiency red or orange light emission, such as in surface mount configurations.
VLMS1300-GS08
VLMS1300-GS08 by Vishay Intertechnology is a 1.1mm SUPER RED LED with peak wavelength of 639nm, forward current of 0.03A, and forward voltage of 2.4V. Ideal for surface mount applications in electronics due to its compact size and high luminous intensity of 54.0mcd at a wide viewing angle of 130°.
QS83XXR24
Apem Components
Visible LEDs;
HLMP-1301-G0000
Broadcom's HLMP-1301-G0000 is a 3mm single color LED with peak wavelength of 635nm. With max forward current of 0.03A, it offers high efficiency red light for various applications like indicators and displays. Operating b/w -55°C to 100°C, this LED has a viewing angle of 60° and nominal luminous intensity of 12.6mcd.
LLN9-WW-XXX
Dialight
The Dialight LLN9-WW-XXX is a complex LED array with 9 functions, warm white color, and surface mount feature. Ideal for lighting applications in bulk packaging, this single-color LED array has 4 terminals and a round shape.
KP-2012SGC
Kingbright
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 15.0; Lens Type: WATER CLEAR; Height: .75 mm;
598-8140-107F
Dialight's 598-8140-107F is a single color LED with water clear lens, emitting yellow light. It has a size of 1.2mm and max forward current of 0.025A, suitable for surface mount applications in various electronic devices due to its compact size and high luminous intensity of 130mcd.
XHP35B-00-0000-0D0BD40E5
Wolfspeed
SINGLE COLOR LED;
CMD17-21VGD/TR8
Visual Communications Company
CMD17-21VGD/TR8 by Visual Communications Company is a 1.4mm SINGLE COLOR LED with peak wavelength of 570nm and green color. It has a max forward current of 0.03A, viewing angle of 140°, and surface mounting feature. Ideal for applications requiring low luminous intensity in compact spaces.
LTST-C190TBKT
Lite-on Technology
LTST-C190TBKT by Lite-on Technology is a 1.1mm BLUE LED with WATER CLEAR lens, operating at -20 to 80°C. It has a peak wavelength of 468nm, forward current of 0.02A, and viewing angle of 130°. Ideal for surface mount applications requiring a single color LED with high luminous intensity up to 130cd.
HLMP3401
Three-five Systems
HLMP3401 by Three-five Systems is a visible LED with peak wavelength of 583nm, forward voltage of 3V, and max current of 0.02A. It's used in applications requiring yellow light emission, with diffused lens type and wide 75° viewing angle.
HLMP-1719
Qt Optoelectronics
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 2; Lens Type: DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb);
LTST-C190YKT
LTST-C190YKT by Lite-on Technology is a 1.1mm YELLOW LED with WATER CLEAR lens, operating at -55 to 85 °C. It has a peak wavelength of 585nm, forward current of 20A, and viewing angle of 130°. Ideal for surface mount applications requiring a single color LED with high luminous intensity and low forward voltage.
QTLP650C2TR
Everlight Electronics
The Everlight Electronics QTLP650C2TR is a 2mm single color LED with peak wavelength of 635nm. It has a max forward current of 0.03A and viewing angle of 140°, making it ideal for high efficiency red lighting applications in various industries. With water clear lens and surface mounting feature, this LED operates b/w -40°C to 85°C temperature range.
597-7701-202F
The Dialight 597-7701-202F is a dual color LED with separate configuration and a size of 2.39 mm. It has a max forward current of 0.03 A and peak wavelengths of 635 nm (super red) and 572 nm (green). This LED is suitable for surface mount applications requiring water clear lenses and offers a viewing angle of 120°.
571-0120-100F
SINGLE COLOR LED ARRAY;
OVM12F3Y7
Tt Electronics Plc
HLMP-1790
Agilent Technologies
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 2.3; Lens Type: TINTED DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb);
1.90.690.269/0000
Rafi & Kg
1.90.690.269/0000 by Rafi & Kg is a 3mm red LED with max current of 0.05A, T-1 code, and radial mount feature. Ideal for indicator lights in electronics due to its single color configuration and round shape.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
KPTD-3216SURCK
Kingbright Elec
KPTD-3216SURCK by Kingbright Electronic is a 1.6mm SINGLE COLOR LED with peak wavelength of 650nm, suitable for applications requiring HYPER RED light. With a max forward current of 0.03A and viewing angle of 50°, it's ideal for surface mount installations in various electronic devices.
KPTD-3216CGCK
Kingbright Electronic
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 300.0; Lens Type: WATER CLEAR; Terminal Finish: GOLD;
KPTD-3216MGC
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 350.0; Lens Type: WATER CLEAR; Viewing Angle: 50 deg;
KPTD-1608CGCK
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 180.0; Lens Type: WATER CLEAR; Minimum Operating Temperature: -40 Cel;
KPTD-1608SURCK
KPTD-1608SURCK by Kingbright Electronic is a 0.7mm SINGLE COLOR LED with peak wavelength of 650nm. With water clear lens and 700.0mcd luminous intensity, it's ideal for surface mount applications in hyper red lighting projects. Operating temperature ranges from -40 to 85°C, making it suitable for various environments.
KPTD-3216SYCK
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 250.0; Lens Type: WATER CLEAR; Terminal Finish: Gold (Au);
KPTD-1608SYCK
KPTD-1608SYCK by Kingbright Electronic is a 0.7mm SUPER BRIGHT YELLOW LED with peak wavelength of 590nm. It has a max forward current of 0.03A and viewing angle of 60°. Ideal for surface mount applications, this SINGLE COLOR LED operates b/w -40 to 85 °C, offering a luminous intensity of 480.0mcd.
KPTD-1608LVZGCK
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 220.0; Lens Type: WATER CLEAR; Peak Wavelength (nm): 515;
KPTD-2012SURCK
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 1650.0; Lens Type: WATER CLEAR; Size: .8 mm;
KPTD-1608SECK
KPTD-1608SECK by Kingbright Electronic is a 0.7mm SINGLE COLOR LED with peak wavelength of 610nm. It has a max forward current of 0.03A and nominal luminous intensity of 800.0mcd. Ideal for applications requiring SUPER BRIGHT ORANGE light, such as indicator lights in electronic devices.
KPTD-2012QBC-D
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 400.0; Lens Type: WATER CLEAR; Minimum Operating Temperature: -40 Cel;
KPTD-3216SURC
KPTD-3216SURC by Kingbright Electronic is a 1.6mm SINGLE COLOR LED with peak wavelength of 640nm, ideal for applications requiring HYPER RED light. With a max forward current of 0.03A and viewing angle of 50°, it's suitable for surface mount installations in various electronic devices.
KPTD-1608LVSECK-J3-PF
KPTD-1608LVSECK-J3-PF by Kingbright Electronic is a 0.7mm SINGLE COLOR LED with peak wavelength of 640nm. It has max forward current of 0.03A and viewing angle of 60°. Ideal for applications requiring HYPER RED light in compact spaces, such as indicator lights in electronic devices.
KPTD-1608QBC-D
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 250.0; Lens Type: WATER CLEAR; Packing Method: TR;
KPTD-3216SGC
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 50.0; Lens Type: WATER CLEAR; Shape: ROUND;
KPTD-3216SRC-PRV
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 300.0; Lens Type: WATER CLEAR; Terminal Finish: Gold (Au);
KPTD-3216SRD-PRV
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 100; Lens Type: DIFFUSED RED; Height: 1.8 mm;
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 500.0; Lens Type: WATER CLEAR; Shape: ROUND;
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 250.0; Lens Type: WATER CLEAR; Peak Wavelength (nm): 590;
KPTD-3216SYC
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 300.0; Lens Type: WATER CLEAR; Configuration: SINGLE;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved