Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
KPTD-1608SYCK by Kingbright Electronic is a 0.7mm SUPER BRIGHT YELLOW LED with peak wavelength of 590nm. It has a max forward current of 0.03A and viewing angle of 60°. Ideal for surface mount applications, this SINGLE COLOR LED operates b/w -40 to 85 °C, offering a luminous intensity of 480.0mcd.
Median Price
$0.108
Lifecycle Status
Suppliers In-Stock
16
In-Stock Inventory
1k+
Arrow
1+ parts
$0.096
100+ parts
-
1k+ parts
10k+ parts
$0.082
TTI Europe
$0.097
Verical
$0.143
Newark
Element14
$0.267
RS (Exports)
$0.180
Farnell
$0.098
NAC Semi
$0.142
Chip Stock
Vyrian
IBS Electronics
$0.093
Pegasus Components GmbH
TME
$0.212
$0.175
$0.125
ComSIT Distribution GmbH
Bristol Electronics
Nova Conductors
Semicontronic
$0.080
Corohmni
$0.594
Aztec Data Supply Inc.
$0.600
Abacus Technologies
Perfect Parts
Continental Prestige Electronics
Argo Parts USA
Bastille Electronics
The single configuration allows for easy integration into various circuit designs.
Small size makes this LED suitable for compact electronic devices.
With a high maximum forward current, this LED can produce bright light.
The peak wavelength of 590 nm ensures a vibrant yellow color output.
The water clear lens provides optimal light transmission and visibility.
This single color LED is perfect for applications requiring a consistent color output.
Two terminals make for easy connectivity and installation.
Can withstand high temperatures, increasing the LED's durability.
Low height allows for discreet placement in electronic devices.
The round shape offers uniform light distribution in all directions.
Withstands low temperatures, making it suitable for various environments.
The super bright yellow color adds visibility to products or displays.
TR packaging ensures safe delivery and storage of the LEDs.
The terminal pitch of 1.65 mm makes soldering easy and secure.
The wide 60° viewing angle allows for versatile placement options.
The high luminous intensity ensures a bright and eye-catching light output.
The surface mount feature simplifies installation and saves space in electronic designs.
Visible LEDs KPTD-1608SYCK attributes and parameters. Explore more Visible LEDs devices from Kingbright Electronic
Color:
Configuration:
Maximum Forward Current:
Lens Type:
Nominal Luminous Intensity (mcd):
Mounting Feature:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Optoelectronic Type:
Height:
Packing Method:
Peak Wavelength (nm):
Shape:
Size:
Terminal Pitch:
Viewing Angle:
KPTD-1608SYCK Optoelectronics trade compliance attributes, and parameters.
HTS
8541.40.20.00
SB
The Kingbright group was founded in 1980 as one of Taiwan’s LED pioneers. Over the last 40 years, we have grown from a small local business to a multi-national enterprise spanning Europe, America, and Asia. Our products are found in computers, consumer electronics, automotive, lighting, and many other applications. The Kingbright brand is trusted by customers world-wide as a world-class manufacturer of LEDs, one of the top-three LED packagers in Taiwan. The group has over 2,000 employees and more than 38,000 sq. meters of automated production facilities. Kingbright people are highly educated (16% with advanced degrees) and experienced (97% of managers with more than 5 years of service). Over the last 40 years of experience in LED design and manufacturing, with support from our loyal customers and suppliers, form the foundation of our competitive strength. Kingbright has five manufacturing plants with a monthly production rate of 800-million LEDs per month. Kingbright maintains the highest quality standards, recognized with ISO 9001 quality, TS 16949 automotive, and ISO 14001 environmental certifications. Our products also carry UL and VDE certifications. The factory is recognized with the BS OHSAS 18001 certificate for employee health and safety, as well as green certifications from Sony and Samsung. The production flow is managed by an advanced Oracle ERP system. Six Sigma management principles guide continuous improvement to the production efficiency and quality.
OPA2227UA
Texas Instruments
OPA2227UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 200 uV and bias current of 0.01 uA. It operates at temperatures ranging from -40 to 85 °C, making it suitable for industrial applications requiring precise signal amplification. With a unity gain bandwidth of 8000 kHz, this op amp is ideal for high-frequency circuit designs.
1554216002
Molex
WIRE AND CABLE;
2N2222A
Surge Components
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .6 A; No. of Terminals: 3;
SS14
Dc Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
CRCW080510K0FKEA
Vishay Intertechnology
Vishay Intertechnology's CRCW080510K0FKEA is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 reference standard compliance and -55 to 155 °C operating temperature range.
BAV99
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
ULN2803A
Allegro MicroSystems
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Maximum Operating Temperature: 85 Cel; Terminal Form: THROUGH-HOLE;
1N4148WS
Formosa Microsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
2N7002
Rectron
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Operating Mode: ENHANCEMENT MODE; Maximum Operating Temperature: 150 Cel; Terminal Form: GULL WING;
SMBJ18CA
International Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.1 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;
RC0402FR-071KL
Yageo
The Yageo RC0402FR-071KL is a fixed resistor with a resistance of 1000 ohm and a tolerance of 1%. It is suitable for surface mount applications and has a max operating temperature of 155 °C.
Samsung
N-CHANNEL AND P-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain-Source On Resistance: 5 ohm; No. of Terminals: 3;
FDN5618P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Transistor Element Material: SILICON; Moisture Sensitivity Level (MSL): 1;
M39029/58-360
Glenair
CONNECTOR ACCESSORY; Contact Gender: MALE; Material: COPPER ALLOY; IEC Conformity: NO; MIL-Connector Accessory Name: CONTACT; MIL Conformity: YES;
PIC18F4550-I/PT
Microchip Technology
PIC18F4550-I/PT by Microchip: 8-bit microcontroller with 44 terminals, 48 MHz clock frequency, and USB connectivity. Ideal for industrial applications requiring low power mode and 10-bit ADC channels.
MMSZ5245BT1G
Onsemi
MMSZ5245BT1G by Onsemi is a Zener diode with 15V nominal reference voltage, 8.5mA test current, and 16 ohm dynamic impedance. It is used in applications requiring precise voltage regulation in a compact SMD package for temperatures ranging from -55 to 150°C.
1N4148
Diodes Incorporated
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Continental Device India
Jiangsu Changjiang Electronics Technology
RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): .715 V; Maximum Operating Temperature: 150 Cel; Maximum Reverse Recovery Time: .006 us; Maximum Output Current: .2 A;
OVSRRGBCC3TM
Optek Technology
TRIPLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 4; Nominal Luminous Intensity (mcd): 105.0/330.0/200.0; Lens Type: DIFFUSED WHITE; Shape: ROUND;
LSGT676-P7R-1-0+N7P9-24-0-20-R18-ZB
Osram Opto Semiconductors
Osram Opto Semiconductors' LSGT676-P7R-1-0+N7P9-24-0-20-R18-ZB is a dual-color LED with peak wavelengths of 645nm and 572nm. It has a max forward current of 0.03A, viewing angle of 120°, and nominal luminous intensity of 118.0/68.0 mcd. Ideal for applications requiring separate color elements in compact spaces like indicator lights or displays.
HSMH-C150
Broadcom
HSMH-C150 by Broadcom is a 2mm SINGLE COLOR LED with peak wavelength of 660nm. It has max forward current of 0.03A and viewing angle of 170°. Ideal for applications requiring red light emission, such as indicator lights in electronic devices.
HSMG-C170
HSMG-C170 by Broadcom is a 1.4mm SINGLE COLOR LED with peak wavelength of 570nm, ideal for applications requiring green light emission. With max forward current of 0.02A and viewing angle of 170°, it operates b/w -40 to 85 °C, making it suitable for surface mount configurations in various electronic devices.
TLMY1100-GS08
Vishay Intertechnology's TLMY1100-GS08 is a 1.6mm SINGLE COLOR LED with peak wavelength of 591nm, forward current of 0.03A, and luminous intensity of 0.05cd. Ideal for applications requiring YELLOW light emission in compact spaces with operating temperatures ranging from -40 to 100°C.
SML-LX23SUGC-TR
Lumex
SML-LX23SUGC-TR by Lumex is a 2mm single color LED with peak wavelength of 574nm. It has a max forward current of 0.025A and viewing angle of 90°. Ideal for surface mount applications in electronics, displays, and indicators due to its super ultra green color and clear lens type.
KP-1608SURCK
Kingbright
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 150.0; Lens Type: WATER CLEAR; Packing Method: TR;
HLMP-4000#002
Agilent Technologies
DUAL COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 3; Nominal Luminous Intensity (mcd): 2.1/4.2; Lens Type: DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb);
LTST-C190YKT
Lite-on Technology
LTST-C190YKT by Lite-on Technology is a 1.1mm YELLOW LED with WATER CLEAR lens, operating at -55 to 85 °C. It has a peak wavelength of 585nm, forward current of 20A, and viewing angle of 130°. Ideal for surface mount applications requiring a single color LED with high luminous intensity and low forward voltage.
KP-3216SRC-PRV
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 80.0; Lens Type: WATER CLEAR; Maximum Operating Temperature: 85 Cel;
HLMP-3401
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 8.0; Lens Type: TINTED DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb);
HSMW-C265
Visible LEDs; Lens Type: DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Operating Temperature: 85 Cel; Maximum Forward Voltage: 3.9 V; JESD-609 Code: e0;
158302250
Wuerth Elektronik & Kg
SINGLE COLOR LED;
CMD15-21UBC/TR8
Cml Technologies & Kg
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 45.0; Lens Type: CLEAR; Maximum Forward Current: .03 A;
CLV1A-FKB-CK1VW1DE1BB7C3C3
Wolfspeed
CLV1A-FKB-CK1VW1DE1BB7C3C3 by Wolfspeed is a triple color LED with a common anode configuration. It has a max forward current of 0.025 A and can operate at temperatures ranging from -40 to 85 °C. This LED is commonly used in surface mount applications for its red, green, and blue color capabilities.
3000
Nte Electronics
SINGLE COLOR LED; Mounting Feature: AXIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 1.4; Lens Type: CLEAR; Viewing Angle: 80 deg;
VLMTG1300-GS08
VLMTG1300-GS08 by Vishay Intertechnology is a 1.1mm TRUE GREEN LED with peak wavelength of 530nm, forward current of 0.02A, and forward voltage of 3.6V. Ideal for surface mount applications in electronics due to its compact size and high luminous intensity of 260.5mcd at a wide viewing angle of 130°.
550-0507F
Dialight
Dialight's 550-0507F is a 5mm red LED with built-in resistor, operating at -40 to 85°C. It has a peak wavelength of 655nm, forward current of 0.0075A, and forward voltage of 5V. Ideal for applications requiring a single color LED with diffused lens in radial mount configuration.
QS103XXW24
Apem Components
Visible LEDs;
OVSA1SBC2R8
Tt Electronics Plc
OVSA1SBC2R8 by Tt Electronics Plc is a WATER CLEAR SINGLE COLOR LED with 0.07A max forward current, 120° viewing angle, and 1600.0 mcd luminous intensity. Ideal for surface mount applications in environments ranging from -40 to 100 °C, this ROUND LED in RED color is commonly used in electronic displays and indicators.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
KPTD-3216SURCK
Kingbright Electronic
KPTD-3216SURCK by Kingbright Electronic is a 1.6mm SINGLE COLOR LED with peak wavelength of 650nm, suitable for applications requiring HYPER RED light. With a max forward current of 0.03A and viewing angle of 50°, it's ideal for surface mount installations in various electronic devices.
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 500.0; Lens Type: WATER CLEAR; Shape: ROUND;
KPTD-3216CGCK
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 200.0; Lens Type: WATER CLEAR; Terminal Finish: Gold (Au);
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 300.0; Lens Type: WATER CLEAR; Terminal Finish: GOLD;
KPTD-3216MGC
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 350.0; Lens Type: WATER CLEAR; Packing Method: TR;
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 350.0; Lens Type: WATER CLEAR; Viewing Angle: 50 deg;
KPTD-1608CGCK
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 180.0; Lens Type: WATER CLEAR; Configuration: SINGLE;
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 180.0; Lens Type: WATER CLEAR; Minimum Operating Temperature: -40 Cel;
KPTD-1608SURCK
KPTD-1608SURCK by Kingbright Electronic is a 0.7mm SINGLE COLOR LED with peak wavelength of 650nm. With water clear lens and 700.0mcd luminous intensity, it's ideal for surface mount applications in hyper red lighting projects. Operating temperature ranges from -40 to 85°C, making it suitable for various environments.
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 700.0; Lens Type: WATER CLEAR; Configuration: SINGLE;
KPTD-1608SYCK
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 480.0; Lens Type: WATER CLEAR; Minimum Operating Temperature: -40 Cel;
KPTD-1608LVZGCK
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 220.0; Lens Type: WATER CLEAR; Peak Wavelength (nm): 515;
KPTD-2012SURCK
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 1650.0; Lens Type: WATER CLEAR; Size: .8 mm;
KPTD-1608SECK
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 800.0; Lens Type: WATER CLEAR; Size: .7 mm;
KPTD-1608SECK by Kingbright Electronic is a 0.7mm SINGLE COLOR LED with peak wavelength of 610nm. It has a max forward current of 0.03A and nominal luminous intensity of 800.0mcd. Ideal for applications requiring SUPER BRIGHT ORANGE light, such as indicator lights in electronic devices.
KPTD-2012QBC-D
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 400.0; Lens Type: WATER CLEAR; Minimum Operating Temperature: -40 Cel;
KPTD-1608LVSECK-J3-PF
KPTD-1608LVSECK-J3-PF by Kingbright Electronic is a 0.7mm SINGLE COLOR LED with peak wavelength of 640nm. It has max forward current of 0.03A and viewing angle of 60°. Ideal for applications requiring HYPER RED light in compact spaces, such as indicator lights in electronic devices.
KPTD-1608QBC-D
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 250.0; Lens Type: WATER CLEAR; Packing Method: TR;
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 250.0; Lens Type: WATER CLEAR; Terminal Pitch: 1.65 mm;
KPTD-1608SEC-J3
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 3000.0; Lens Type: WATER CLEAR; Terminal Finish: GOLD OVER NICKEL;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved