Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Kingbright Electronic's KP-1608SURCK is a 1.2mm SINGLE COLOR LED with peak wavelength of 650nm and max forward current of 0.03A. Ideal for applications requiring HYPER RED light emission, such as indicator lights in electronic devices due to its compact size and water clear lens type.
Median Price
$0.060
Lifecycle Status
Suppliers In-Stock
30
In-Stock Inventory
1k+
Newark
1+ parts
-
100+ parts
1k+ parts
10k+ parts
$0.059
TTI Europe
$0.049
Verical
$0.066
Arrow
$0.062
Element14
$0.265
$0.202
Farnell
$0.050
Chip1Stop
$0.052
RS (Exports)
$0.082
Tomark Electronics Ltd
$0.030
Maritex
$0.298
$0.081
Rapid Electronics
$60.401
NAC Semi
Vyrian
LIBRA Elektronik GmbH
TME
$0.083
$0.057
$0.047
IBS Electronics
$0.053
Rebound Electronics
Semi Source
Micros
ComSIT Distribution GmbH
Partservice
$0.111
$0.055
Micros sp.j. W. Kędra i J. Lic
$0.085
ACDS - Activité Composants Distribution Service
Bristol Electronics
Atlantic Semiconductor
ABC Electronics Ltd.
SOS electronic
$0.054
$0.048
Speed Components Ltd
Bas Electronics GmbH & Co. KG
Nova Conductors
Semicontronic
$0.042
$0.041
Advanced Electronics
$0.098
$0.093
Corohmni
$0.219
Aztec Data Supply Inc.
$0.420
Perfect Parts
Abacus Technologies
Eastek
GreenTree Electronics
Continental Prestige Electronics
iodParts Technologies Inc.
Allen Electronics Distributors
$0.072
Cyclops Electronics Ltd (Excess)
Bastille Electronics
Robosynatics
Lucentia Tech
$1.536
Modulus Dynamics
Argo Parts USA
Single configuration makes it easy to use and integrate in various applications.
Compact size allows for flexibility in design and placement.
Low forward current consumption helps in energy efficiency.
Peak wavelength of 650nm ensures a vibrant red color output.
Water clear lens type provides clear and bright illumination.
Single color LED ensures consistent and uniform light output.
High maximum operating temperature allows for use in various environments.
Low height allows for sleek and compact design.
Rectangular shape offers versatility in mounting options.
Wide operating temperature range ensures reliability in extreme conditions.
High luminous intensity ensures bright illumination.
Vibrant hyper red color output for eye-catching displays.
Bulk packing method is cost-effective for bulk orders.
High reverse voltage tolerance for added protection.
Optimal terminal pitch for easy soldering and connection.
Wide viewing angle for better visibility from different angles.
High nominal luminous intensity ensures a strong and bright light output.
Surface mount feature simplifies installation and provides a neat finish.
Low forward voltage helps in energy efficiency and reduces heat generation.
Visible LEDs KP-1608SURCK attributes and parameters. Explore more Visible LEDs devices from Kingbright Electronic
Color:
Color At Wavelength:
Configuration:
Maximum Forward Current:
Maximum Forward Voltage:
Lens Type:
Minimum Luminous Intensity:
Nominal Luminous Intensity (mcd):
Mounting Feature:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Optoelectronic Type:
Height:
Packing Method:
Peak Wavelength (nm):
Maximum Reverse Voltage:
Shape:
Size:
Sub-Category:
Terminal Pitch:
Viewing Angle:
KP-1608SURCK Optoelectronics trade compliance attributes, and parameters.
HTS
8541.40.20.00
SB
The Kingbright group was founded in 1980 as one of Taiwan’s LED pioneers. Over the last 40 years, we have grown from a small local business to a multi-national enterprise spanning Europe, America, and Asia. Our products are found in computers, consumer electronics, automotive, lighting, and many other applications. The Kingbright brand is trusted by customers world-wide as a world-class manufacturer of LEDs, one of the top-three LED packagers in Taiwan. The group has over 2,000 employees and more than 38,000 sq. meters of automated production facilities. Kingbright people are highly educated (16% with advanced degrees) and experienced (97% of managers with more than 5 years of service). Over the last 40 years of experience in LED design and manufacturing, with support from our loyal customers and suppliers, form the foundation of our competitive strength. Kingbright has five manufacturing plants with a monthly production rate of 800-million LEDs per month. Kingbright maintains the highest quality standards, recognized with ISO 9001 quality, TS 16949 automotive, and ISO 14001 environmental certifications. Our products also carry UL and VDE certifications. The factory is recognized with the BS OHSAS 18001 certificate for employee health and safety, as well as green certifications from Sony and Samsung. The production flow is managed by an advanced Oracle ERP system. Six Sigma management principles guide continuous improvement to the production efficiency and quality.
2N2222A
Crystalonics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
2N7002
Vishay Intertechnology
2N7002 by Vishay Intertechnology is a N-CHANNEL FET with 60V DS Breakdown Voltage, 0.115A Drain Current, and 7.5 ohm On Resistance. Ideal for SWITCHING applications due to its SINGLE configuration with BUILT-IN DIODE. Operates in ENHANCEMENT MODE, suitable for surface mount with GULL WING terminals.
1N4148
Laube Technology
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
NC7WZ17P6X
Onsemi
The Onsemi NC7WZ17P6X is a logic gate with 2 functions, featuring a propagation delay of 13.1 ns at 1.8V supply voltage. Ideal for industrial applications, it operates b/w -40 to 85°C and has a max power supply current of 100mA. With Schmitt Trigger technology and small outline packaging, it suits compact electronic designs requiring fast signal processing.
Gulf Semiconductor
Zetex Plc
RC0603FR-0710KL
Yageo
Yageo's RC0603FR-0710KL is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. It operates b/w -55 to 155 °C and is ideal for surface mount applications in electronics requiring precise resistance values.
BAV99
Vishay Telefunken
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
M24308/2-1F
Cristek Interconnects
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Rows Loaded: 2; Shell Size: 1/E; Filter Feature: NO;
General Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; JEDEC-95 Code: TO-236AB; Qualification: Not Qualified; Package Style (Meter): SMALL OUTLINE;
LL4148
Synsemi
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
1N4148WT
Diotec Semiconductor Ag
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Samsung
N-CHANNEL AND P-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain-Source On Resistance: 5 ohm; No. of Terminals: 3;
1N4148WS
Hitano Enterprise
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Meritek Electronics
DS18B20+
Maxim Integrated
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 3; Package Shape or Style: RECTANGULAR; Maximum Operating Current: 1.5 mA; Package Equivalence Code: SIP3,.1,50;
M39029/56351
Souriau
CONNECTOR ACCESSORY; MIL Conformity: YES; Contact Gender: FEMALE; Insertion Tools: M81969/14-10; Tool Settings: M22520/2-10; DIN Conformity: NO;
Surge Components
NC7WZ07P6X
The Onsemi NC7WZ07P6X is a logic gate with 2 functions, featuring a propagation delay of 4.8 ns at 1.8V supply voltage. With open-drain output characteristics, it operates in industrial temperatures from -40 to 85°C. Ideal for applications requiring fast signal processing and low power consumption in compact designs.
FT232RQ-REEL
FTDI
FTDI's FT232RQ-REEL is a USB bus controller with 32 terminals, operating at 3.3-5.25V. It supports data transfer rates up to 60MBps and clock frequency of 12.02MHz, suitable for RS232/RS422/RS485 interfaces in various applications like industrial automation and communication systems.
LGL29K-G2J1-24-Z
Osram Opto Semiconductors
Osram Opto Semiconductors' LGL29K-G2J1-24-Z is a 1.3mm single color LED with peak wavelength of 572nm and max forward current of 0.02A. Ideal for applications requiring green light emission, such as indicator lights in electronic devices. Operating temperature range from -40 to 100°C makes it versatile for various environments.
597-7721-207F
Dialight
Dialight's 597-7721-207F is a dual-color LED with peak wavelengths of 586/565nm. It has a max forward current of 0.03A and a viewing angle of 120°, making it ideal for surface mount applications requiring yellow/green light emission. The LED's water-clear lens and compact size of 2.3876mm make it suitable for various optoelectronic designs.
SML-LX0603USBW-TR
Lumex
The Lumex SML-LX0603USBW-TR is a 1mm single color LED with peak wavelength of 470nm. It has a max forward current of 0.025A and viewing angle of 140°. Ideal for surface mount applications, this ultra super blue LED operates b/w -25 to 85 °C, making it suitable for various lighting projects.
HLMP-1301-E00A2
Broadcom
Broadcom's HLMP-1301-E00A2 is a 3mm single color LED with peak wavelength of 635nm. It has a max forward current of 0.03A and viewing angle of 60°. Ideal for applications requiring high efficiency red light emission in bulk packaging, suitable for radial mounting setups.
SSL-LX3059IGW
SSL-LX3059IGW by Lumex is a 3mm dual color LED with common cathode configuration. It has a peak wavelength of 635/565nm and max forward current of 0.025A, making it ideal for applications requiring high intensity red/green light output. With a viewing angle of 60° and radial mount feature, this LED is suitable for various lighting projects in temperatures ranging from -40 to 85°C.
SSL-LX5093SUGC
SSL-LX5093SUGC by Lumex is a 5mm single color LED with built-in resistor. It has a peak wavelength of 574nm, viewing angle of 30°, and luminous intensity of 1000.0mcd. Ideal for applications requiring super ultra green light emission in bulk packaging for radial mounting setups.
LGL29K-G2J1-24-0-2-R18-Z
Osram Opto Semiconductors' LGL29K-G2J1-24-0-2-R18-Z is a 1.3mm SINGLE COLOR LED with peak wavelength of 572nm and viewing angle of 160°. Ideal for surface mount applications, it has a max forward current of 0.02A and nominal luminous intensity of 3.92mcd.
5310F5
Industrial Devices
Visible LEDs; Lens Type: DIFFUSED; Color At Wavelength: Green; Height: 11 mm; Viewing Angle: 90 deg; Maximum Forward Current: .03 A;
LTST-S326KGJRKT
Lite-on Technology
LTST-S326KGJRKT by Lite-on Technology is a 2mm dual-color LED with common anode configuration. It has a max forward current of 0.03A and peak wavelengths of 639nm (super red) and 574nm (green). Ideal for surface mount applications, this LED offers a viewing angle of 130° and nominal luminous intensity of 25/35mcd, suitable for various lighting projects.
HLMP-4000#002
HLMP-4000#002 by Broadcom is a 5mm dual color LED with common cathode configuration. It has a max forward current of 0.03A and peak wavelengths of 635nm/568nm. Ideal for applications requiring high efficiency red/green illumination in a radial mount setup.
550-2405F
The Dialight 550-2405F is a 5mm red LED with peak wavelength of 650nm. It has a max forward current of 0.02A and forward voltage of 3V, suitable for single color indicator lights in various applications. With diffused lens and nominal luminous intensity of 2.2mcd, it offers a wide viewing angle of 50° for clear visibility.
XHP35B-H0-0000-0D0HC440G
Cree Led
SINGLE COLOR LED;
TLMG1100-GS08
Vishay Intertechnology's TLMG1100-GS08 is a 1.6mm GREEN LED with peak wavelength of 572nm, forward current of 0.03A, and forward voltage of 2.4V. Ideal for surface mount applications in visible LED displays due to its high luminous intensity of 35mcd and wide viewing angle of 160°.
XHP35B-00-0000-0D0BD40E7
SML-D12M8WT86Q
ROHM
ROHM SML-D12M8WT86Q is a 1.2mm SINGLE COLOR LED with 0.02A max forward current, emitting YELLOWISH GREEN light. Ideal for surface mount applications, it has a luminous intensity of 25.0mcd and operates b/w -40°C to 85°C temperature range.
HLMP-1301
Qt Optoelectronics
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 2.5; Lens Type: RED DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb);
KPHHS-1005SURCK
Kingbright Electronic
KPHHS-1005SURCK by Kingbright Electronic is a 0.8mm SINGLE COLOR LED with peak wavelength of 650nm. It has a max forward current of 0.03A and viewing angle of 120°. Ideal for applications requiring hyper red light emission in compact spaces.
LTST-C230KRKT
LTST-C230KRKT by Lite-on Technology is a 1.6mm single color LED with peak wavelength of 639nm, ideal for applications requiring red light emission. With a max forward current of 0.03A and forward voltage of 2.4V, it operates b/w -30°C to 85°C temperature range efficiently in surface mount configurations.
SSL-LX3052YD
SSL-LX3052YD by Lumex is a 3mm single color LED with peak wavelength of 585nm. It has a max forward current of 0.03A and viewing angle of 70°. Ideal for applications requiring yellow light emission, such as indicator lights in electronic devices.
SSL-LX5093IGW
The Lumex SSL-LX5093IGW is a 5mm dual-color LED with red/green colors, diffused milky white lens, and common bipolar terminal. It has a max forward current of 0.03A, peak wavelengths of 635nm/565nm, and nominal luminous intensity of 30.0/20.0 mcd. Ideal for applications requiring radial mounting such as indicator lights in electronic devices.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
KP-1608SURCK
Kingbright
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 150.0; Lens Type: WATER CLEAR; Packing Method: TR;
KP-1608SGC
KP-1608SGC by Kingbright Electronic is a 1.2mm SINGLE COLOR LED with peak wavelength of 565nm and max forward current of 0.025A. Ideal for applications requiring SUPER BRIGHT GREEN illumination, it has a viewing angle of 120° and operates b/w -40 to 85 °C temperatures.
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 15.0; Lens Type: WATER CLEAR; Maximum Operating Temperature: 85 Cel;
KP-1608MGC
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 70.0; Lens Type: WATER CLEAR; Maximum Forward Current: .03 A;
KP-1608MGC by Kingbright Electronic is a 1.2mm rectangular single color LED with a peak wavelength of 574nm and a max forward current of 0.03A. It is commonly used in applications such as surface mount lighting and displays due to its water clear lens and high luminous intensity of 70.0mcd.
KP-1608SURC
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 200.0; Lens Type: WATER CLEAR; Minimum Operating Temperature: -40 Cel;
KP-1608SURC by Kingbright Electronic is a 1.2mm SINGLE COLOR LED with peak wavelength of 640nm and 120° viewing angle. Ideal for applications requiring HYPER RED light emission, such as indicator lights in electronic devices. With a max forward current of 0.03A, it operates b/w -40°C to 85°C temperature range efficiently.
KP-1608SYCK
Kingbright Electronic's KP-1608SYCK is a 1.2mm SINGLE COLOR LED with peak wavelength of 590nm and luminous intensity of 120.0mcd. Ideal for applications requiring SUPER BRIGHT YELLOW illumination, such as indicator lights in electronic devices due to its WATER CLEAR lens and surface mounting feature.
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 120.0; Lens Type: WATER CLEAR; Minimum Operating Temperature: -40 Cel;
KP-1608CGCK
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 40.0; Lens Type: WATER CLEAR; Maximum Operating Temperature: 85 Cel;
Kingbright Electronic's KP-1608CGCK is a 1.2mm SINGLE COLOR LED with peak wavelength of 574nm, max forward current of 0.03A, and water clear lens. Ideal for applications requiring green light emission in compact spaces due to its small size and surface mounting feature.
KP-1608SRC-PRV
KP-1608SRC-PRV by Kingbright Electronic is a 1.2mm SINGLE COLOR LED with a peak wavelength of 660nm and max forward current of 0.03A. Ideal for applications requiring SUPER BRIGHT RED illumination, such as indicator lights in electronic devices due to its WATER CLEAR lens and surface mounting feature.
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 100.0; Lens Type: WATER CLEAR; Shape: RECTANGULAR;
KP-1608SECK
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 160.0; Lens Type: WATER CLEAR; Packing Method: TR;
KP-1608SECK by Kingbright Electronic is a 1.2mm rectangular single color LED with a peak wavelength of 610nm and a max forward current of 0.03A. It is commonly used in applications that require a super bright orange light source, such as signage or indicator lights.
KP-1608VGC-A
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 180.0; Lens Type: WATER CLEAR; Configuration: SINGLE;
KP-1608PBC-A
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 60.0; Lens Type: WATER CLEAR; Packing Method: BULK;
KP-1608ZGC-E
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 650.0; Lens Type: WATER CLEAR; Configuration: SINGLE;
KP-1608SYC
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 150.0; Lens Type: WATER CLEAR; Size: 1.2 mm;
KP-1608SEC
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 200.0; Lens Type: WATER CLEAR; Maximum Forward Current: .03 A;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved