Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
KEMET A750MW187M1JAAE020 is a 180uF, 63V aluminum electrolytic capacitor with 0.12 Tan Delta and 2.268mA Leakage Current. Ideal for applications requiring high ripple current handling in temperatures ranging from -55 to 105°C.
Median Price
$1.580
Lifecycle Status
Suppliers In-Stock
5
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
$1.540
100+ parts
$0.754
1k+ parts
$0.630
10k+ parts
-
DigiKey
$1.620
$0.810
$0.564
$0.494
VNN
Rutronik
$0.446
Nova Conductors
Corohmni
$0.171
Ampacity Inc.
$1.090
Argo Parts USA
Continental Prestige Electronics
Aranea Global
Solid polymer aluminum dielectric material ensures reliable performance and long lifespan.
Low tan delta value indicates low dissipation factor, leading to efficient operation.
Low leakage current ensures minimal power loss and efficient energy usage.
High ripple current rating allows the capacitor to withstand fluctuating loads and provide stable performance.
Capable of operating at high temperatures without compromising performance, suitable for various applications.
High capacitance value enables the capacitor to store a significant amount of electrical charge.
Suitable for applications requiring a voltage rating of up to 63 volts, providing versatility in usage.
Fixed Capacitors A750MW187M1JAAE020 attributes and parameters. Explore more Fixed Capacitors devices from KEMET Corporation
Additional Features:
Capacitance:
Capacitor Type:
Diameter:
Dielectric Material:
Equivalent Series Resistance / ESR (mohm ):
Leakage Current (mA):
Length:
Mounting Feature:
Negative Tolerance:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Style (Meter):
Packing Method:
Polarity:
Positive Tolerance:
Rated DC Voltage (URdc):
Ripple Current (mA):
Tan Delta:
Terminal Pitch:
Terminal Shape:
A750MW187M1JAAE020 Capacitors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8532.22.00.20
SB
KEMET Corporation is an American electronics company that specializes in the design, manufacturing, and distribution of capacitors, electromagnetic compatibility solutions, and other electronic components. The company was founded in 1919 and is headquartered in Fort Lauderdale, Florida, with manufacturing facilities and sales offices around the world. KEMET Corporation and its subsidiaries (KEMET), is a wholly owned subsidiary of Yageo Corporation (TAIEX: 2327).
CEO
William M. Lowe, Jr.
Executive VP & CFO
Gregory C. Thompson
Executive VP & President - TOKIN Corporation
Shigenori (Sean) Oyama
Advanced Tantalum Manufacturing
Fabrication
Fab Initiation
USA
Simpsonville
Wafer Capacity
382
FELCO
Chicago
Fort Lauderdale
61
Indonesia
Batam
68
China
Anting-Shanghai
73
Mexico
Matamoros
286
Ciudad Victoria
265
Guadalupe
Monterrey
532
San Nicolas
North Macedonia
Skopje
126
Plant A
Suzhou
353
Plant B
Xiamen
432
Italy
Pontecchio
226
Portugal
Evora
233
TOKIN
Vietnam
Biên Hòa City
174
Thailand
Hom Sin
Chachoengsao
171
Japan
Sendai
378
Toyama
Nyuzen
209
Shiroishi
Finland
Suomussalmi
56
Bulgaria
Kyustendil
86
Sweden
Farjestaden
28
FDC5614P
TAIZHOU ELECTRONICS CO LTD
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.92 W; Maximum Operating Temperature: 150 Cel; Package Body Material: PLASTIC/EPOXY;
BAV99WT1G
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
L7805CV
Sgs-ates Componenti Electronici S P A
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Terminal Finish: Tin/Lead (Sn/Pb); Nominal Output Voltage-1: 5 V;
M24308/2-1F
TE Connectivity
TE Connectivity's M24308/2-1F D-Sub Connector features 9 contacts, 2 rows, and a shell size of 1/E. With a rated current of 7.5A, it operates b/w -55°C to 125°C. Ideal for cable mounting applications, this connector has a steel shell with cadmium finish and uses crimp termination for female contact pins.
LL4148
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
AT90CAN128-16AU
Microchip Technology
AT90CAN128-16AU by Microchip Technology is a microcontroller with 8-bit data RAM and 16-bit address bus width. It operates at a max clock frequency of 16 MHz, making it suitable for industrial applications requiring low power mode and connectivity options like CAN, SPI, and USART. With 53 I/O lines and 8-channel 10-bit ADCs, this microcontroller offers versatile peripheral support for various embedded systems.
Eic Semiconductor
BSS138
Good-ark Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 6 ohm; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
BSS123,215
NXP Semiconductors
NXP Semiconductors' BSS123,215 is a N-CHANNEL FET for SWITCHING applications. Features include 100V DS Breakdown Voltage, 0.17A Drain Current, and 6 ohm On Resistance. With GULL WING terminals and ENHANCEMENT MODE operation, it's ideal for small outline packages in various electronic devices.
Daco Semiconductor
Onsemi
BAV99WT1G by Onsemi is a series connected diode with 0.006 us reverse recovery time. It is a small outline rectifier diode with 70V peak reverse voltage, ideal for surface mount applications in electronics requiring fast switching and low forward voltage drop.
SMBJ18CA
Multicomp Pro
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Diode Element Material: SILICON; Technology: AVALANCHE; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V;
1N4148WS
Diodes Incorporated
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
STM32H753BIT6
STMicroelectronics
STM32H753BIT6 by STMicroelectronics is a 32-bit microcontroller with 208 terminals, operating at up to 48 MHz. It features 20-Ch 16-Bit ADCs, 2-Ch 12-Bit DACs, and extensive peripherals for industrial applications like CAN, Ethernet, and USB connectivity. With a wide temperature range of -40 to +85 °C, it's ideal for demanding environments requiring high-speed processing capabilities.
RC0805FR-0710RL
Yageo
Yageo's RC0805FR-0710RL is a 10 ohm SMT fixed resistor with 1% tolerance and 0.125 W power dissipation. With a temperature range of -55 to 155 °C, it suits applications requiring precise resistance values in compact surface mount designs.
FDLL4148
FDLL4148 by Onsemi is a single rectifier diode with a max reverse recovery time of 0.004 us. With a max forward voltage of 1V and output current of 0.2A, it is ideal for applications requiring fast switching speeds in electronic circuits. The diode's glass package body material and isolated case connection make it suitable for surface mount designs operating at temperatures up to 175°C.
2N2222A
New Jersey Semiconductor Products
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Package Shape: ROUND;
BAV99
First Components International
North American Philips Discrete Products Div
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
FDN306P
FDN306P by Onsemi is a P-CHANNEL FET with 12V DS Breakdown Voltage, ideal for SWITCHING applications. It features SINGLE configuration with BUILT-IN DIODE and GULL WING terminals. Operating in ENHANCEMENT MODE, it has a max ID of 2.6A and 0.04 ohm RDS(on), suitable for small outline packages at temperatures ranging from -55 to 150°C.
C1608X7R1H104K080AA
TDK
C1608X7R1H104K080AA by TDK is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. With X7R temperature characteristics, it operates b/w -55 to 125 °C, ideal for SMT applications requiring compact size and high reliability. Its wraparound terminals and multi-layer design make it suitable for various electronic circuits.
GRM1555C1H120JA01D
Murata Manufacturing
GRM1555C1H120JA01D by Murata is a ceramic capacitor with capacitance of 0.000012 uF and rated DC voltage of 50V. With C0G temperature characteristics, it operates b/w -55 to 125 °C, making it ideal for SMT applications requiring high precision and stability. Its compact rectangular package and surface mount feature enhance versatility in various electronic circuits.
M39006/22-0350
KYOCERA AVX
TANTALUM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 47 uF; Rated DC Voltage (URdc): 50 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (WET);
C4532X7R1E226M250KC
TDK C4532X7R1E226M250KC is a 22uF ceramic capacitor with 25V URdc. X7R temperature characteristics, -55 to 125 °C operating range, and SMT package make it ideal for surface mount applications in various electronic devices.
EEEHD1V221AP
Panasonic
Panasonic EEEHD1V221AP is a 220uF aluminum electrolytic capacitor with 35V rated DC voltage. It has low tan delta of 0.14 and leakage current of 0.077mA, suitable for automotive applications meeting AEC-Q200 standard. With compact SMT package style and cylindrical shape, it is ideal for surface mounting in tight spaces.
M39006/250220
Cornell Dubilier Electronics
M39006/250220 by Cornell Dubilier Electronics is a TANTALUM CAPACITOR with 220uF capacitance, 30V URdc, and 0.42 Tan Delta. It is ideal for applications requiring high ripple current handling capabilities and operates b/w -55 to 125 °C. This polarized capacitor conforms to MIL-C-39006/25 standards and features a tubular package with wire terminals for through-hole mounting.
CGA3E2X7R1H104K080AA
CGA3E2X7R1H104K080AA by TDK is a fixed ceramic capacitor with a capacitance of 0.1 uF and a rated DC voltage of 50 V. It has a temperature coefficient of 15% and can operate at temperatures ranging from -55 to 125 °C. This capacitor is commonly used in surface mount applications for various electronic devices.
C1608X5R1E106M080AC
C1608X5R1E106M080AC by TDK is a ceramic capacitor with a capacitance of 10 uF and a rated DC voltage of 25 V. It has a temperature coefficient of 15% and can operate in temperatures ranging from -55 to 85 °C. This capacitor is commonly used in surface mount applications.
C1608X5R0J226M080AC
C1608X5R0J226M080AC by TDK is a ceramic capacitor with 22uF capacitance and 6.3V rated DC voltage. Featuring X5R temperature characteristics, it operates b/w -55 to 85°C, making it ideal for SMT applications requiring compact size and high reliability. With a negative tolerance of 20%, this multi-layer capacitor is suitable for various electronic devices.
GRM155R60J106ME15D
Murata Manufacturing's GRM155R60J106ME15D is a ceramic capacitor with 10uF capacitance, 6.3V rated DC voltage, and X5R temperature characteristics. Ideal for surface mount applications in electronics due to its compact size (1x0.5x0.5mm) and high reliability with a temperature coefficient of 15%.
CGA2B3X7R1H104K050BE
CGA2B3X7R1H104K050BE by TDK is a ceramic capacitor with 0.1uF capacitance, X7R temperature characteristics, and 50V rated DC voltage. It is ideal for surface mount applications in automotive electronics due to its AEC-Q200 compliance and compact 0402 size. With a wide operating temperature range from -55°C to 125°C, it offers reliable performance in harsh environments.
C1608X7R1H103K080AA
The TDK C1608X7R1H103K080AA is a 0603 SMT ceramic capacitor with capacitance of 0.01uF and rated DC voltage of 50V. With X7R temperature characteristics, it operates b/w -55°C to 125°C, making it suitable for various electronic applications requiring stable performance in a compact size.
C0805C472K5RACTU
KEMET Corporation
The KEMET C0805C472K5RACTU is a ceramic capacitor with 0.0047uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring compact fixed capacitors with reliable performance.
T491B476K010AT
KEMET Corporation's T491B476K010AT is a 47uF TANTALUM CAPACITOR with 10V URdc. It features Tan Delta of 0.08, Leakage Current of 0.0047mA, and Ripple Current of 117mA. Ideal for applications requiring compact SMT capacitors with high capacitance and low ESR like power supplies and consumer electronics.
GMK107AB7105KAHT
Taiyo Yuden
Taiyo Yuden's GMK107AB7105KAHT is a ceramic capacitor with 1uF capacitance, X7R temperature characteristics, and 35V rated DC voltage. Ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance and compact dimensions of 1.6mm x 0.8mm x 0.8mm.
GRM188R71A225KE15D
GRM188R71A225KE15D by Murata is a ceramic capacitor with 2.2uF capacitance and 10V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring compact, high-performance capacitors.
CGA2B3X7R1H473K050BB
TDK's CGA2B3X7R1H473K050BB is a SMT ceramic capacitor with 0.047 uF capacitance, 50V URdc, and X7R temperature code. Ideal for AEC-Q200 applications requiring compact design, it operates b/w -55 to 125 °C with ±10% tolerance. Its multi-layer structure and matte tin finish make it suitable for automotive electronics.
GRM32ER71A476KE15L
Murata Manufacturing's GRM32ER71A476KE15L is a ceramic capacitor with 47uF capacitance, 10V rated DC voltage, and X7R temperature characteristics. It is ideal for surface mount applications in electronics requiring stable performance at temperatures ranging from -55 to 125°C.
M39006/22-0377
Vishay Tansitor
TANTALUM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 68 uF; Rated DC Voltage (URdc): 60 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (WET);
C1206C475K5PACTU
KEMET Corporation's C1206C475K5PACTU is a ceramic capacitor with 4.7uF capacitance and 50V rated DC voltage. It has X5R temperature characteristics, -55 to 85 °C operating range, and ±10% tolerance. Ideal for SMT applications requiring compact rectangular package with multi-layer design.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
A750MW337M1HAAE020
ALUMINUM ELECTROLYTIC CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 330 uF; Rated DC Voltage (URdc): 50 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: ALUMINUM (SOLID POLYMER);
A750KW337M1VAAE020
ALUMINUM ELECTROLYTIC CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 330 uF; Rated DC Voltage (URdc): 35 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: ALUMINUM (SOLID POLYMER);
A750MS108M1CAAE013
ALUMINUM ELECTROLYTIC CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 1000 uF; Rated DC Voltage (URdc): 16 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: ALUMINUM (SOLID POLYMER);
A750KS227M1EAAE015
ALUMINUM ELECTROLYTIC CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 220 uF; Rated DC Voltage (URdc): 25 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: ALUMINUM (SOLID POLYMER);
A750KS337M1EAAE018
ALUMINUM ELECTROLYTIC CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 330 uF; Rated DC Voltage (URdc): 25 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: ALUMINUM (SOLID POLYMER);
A750MS477M1EAAE015
KEMET A750MS477M1EAAE015 is a 470uF, 25V ALUMINUM ELECTROLYTIC CAPACITOR with low ESR of 15mohm. Ideal for applications requiring high ripple current (245mA) and low leakage current (2.35mA), such as power supplies and filtering circuits in electronics.
A750MW228M1CAAE010
ALUMINUM ELECTROLYTIC CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 2200 uF; Rated DC Voltage (URdc): 16 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: ALUMINUM (SOLID POLYMER);
A750KS158M0JAAE014
ALUMINUM ELECTROLYTIC CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 1500 uF; Rated DC Voltage (URdc): 6.3 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: ALUMINUM (SOLID POLYMER);
A750KK107M1EAAE040
ALUMINUM ELECTROLYTIC CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 100 uF; Rated DC Voltage (URdc): 25 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: ALUMINUM (SOLID POLYMER);
A750EQ477M1CAAE015
ALUMINUM ELECTROLYTIC CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 470 uF; Rated DC Voltage (URdc): 16 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: ALUMINUM (SOLID POLYMER);
A750MS567M1EAAE015
ALUMINUM ELECTROLYTIC CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 560 uF; Rated DC Voltage (URdc): 25 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: ALUMINUM (SOLID POLYMER);
A750MW567M1VAAE018
ALUMINUM ELECTROLYTIC CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 560 uF; Rated DC Voltage (URdc): 35 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: ALUMINUM (SOLID POLYMER);
A750KK477M1AAAE016
ALUMINUM ELECTROLYTIC CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 470 uF; Rated DC Voltage (URdc): 10 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: ALUMINUM (SOLID POLYMER);
A750KS567M1CAAE013
ALUMINUM ELECTROLYTIC CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 560 uF; Rated DC Voltage (URdc): 16 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: ALUMINUM (SOLID POLYMER);
A750KK337M1CAAE014
ALUMINUM ELECTROLYTIC CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 330 uF; Rated DC Voltage (URdc): 16 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: ALUMINUM (SOLID POLYMER);
A750EK227M1CAAE016
ALUMINUM ELECTROLYTIC CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 220 uF; Rated DC Voltage (URdc): 16 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: ALUMINUM (SOLID POLYMER);
A750KS477M1CAAE013
A750MW187M1JBAE020
ALUMINUM ELECTROLYTIC CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 180 uF; Rated DC Voltage (URdc): 63 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: ALUMINUM (SOLID POLYMER);
A750MW187M1JCAE020
A750MW187M1JEAE020
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved