Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
RF SMB CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Termination Type: SOLDER; MIL Conformity: NO; Manufacturer Series: SMB;
Median Price
$3.014
Lifecycle Status
Suppliers In-Stock
31
In-Stock Inventory
1k+
Powell Electronics
1+ parts
$0.990
100+ parts
-
1k+ parts
10k+ parts
PEI Genesis
$1.260
RS (Exports)
$2.020
RS Americas
$2.300
Farnell
$2.840
$1.670
Interstate Connecting
$3.407
$2.968
$2.667
Mouser Electronics
$3.570
$2.740
DigiKey
$2.575
$2.189
$2.052
Element14
$4.130
$3.170
$2.690
Newark
$5.130
$4.040
$3.520
Chip1Stop
$6.040
$3.040
$2.670
Master Electronics
$2.200
$1.800
$1.720
Verical
$3.187
$2.551
Arrow
Nova Conductors
$1.930
Component Electronics Inc.
$3.850
$2.880
$2.500
Bristol Electronics
Vyrian
IBS Electronics
$3.086
$2.525
$2.412
Electro Sonic
$1.740
$1.470
$1.360
Bisco
Prism Electronics
SPM Sales
NexGen Digital
J2 Sourcing AB
DF Sales Co.
Connector Distribution Corp
Right Parts Inc.
Semtec, LLC
VNN
Ampacity Inc.
$0.840
Corohmni
$1.719
Allen Electronics Distributors
Continental Prestige Electronics
$2.890
$1.940
$1.520
Advanced Electronics
$3.486
$3.172
$2.859
Authorized Procurement Solutions
Perfect Parts
Kepictronics
Futuretech Components
Glotronic Ltd.
Netroflash
$1.891
$1.833
$1.795
Argo Parts USA
GreenTree Electronics
SSMB Connectors 131-3701-261 attributes and parameters. Explore more SSMB Connectors devices from Johnson Components
Additional Features:
Body or Shell Style:
Characteristic Impedance:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Coupling Type:
DIN Conformance:
Filter Feature:
IEC Conformity:
Insertion Loss:
Insulator Material:
JESD-609 Code:
MIL Conformity:
Manufacturer Series:
Mounting Style:
Mounting Type:
Maximum Operating Frequency:
Option:
Panel Mount:
Termination Type:
131-3701-261 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.10
SB
BAV99
Allegro MicroSystems
RECTIFIER DIODE; Terminal Position: END; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
OPA2227UA
Texas Instruments
OPA2227UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 200 uV and bias current of 0.01 uA. It operates at temperatures ranging from -40 to 85 °C, making it suitable for industrial applications requiring precise signal amplification. With a unity gain bandwidth of 8000 kHz, this op amp is ideal for high-frequency circuit designs.
RC0402FR-0710KL
Yageo
Yageo's RC0402FR-0710KL is a 10000 ohm SMT fixed resistor with 1% tolerance, suitable for applications requiring a rated power dissipation of 0.0625 W. With a temperature coefficient of 100 ppm/°C, it operates b/w -55 to 155 °C, making it ideal for various electronic circuits.
2N2222A
Electronic Transistors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LM107H
Intersil
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Nominal Common Mode Reject Ratio: 96 dB;
1N4148
1N4148 by Texas Instruments is a rectifier diode with max reverse recovery time of 0.004 us and max forward voltage of 1V. Ideal for applications requiring low reverse current such as signal demodulation circuits. Operates at max temp of 200°C, making it suitable for high-temperature environments.
RC0603FR-071KL
Yageo's RC0603FR-071KL is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in electronics, it operates b/w -55 to 155 °C with a temperature coefficient of 100 ppm/°C.
261
Deltrol Controls
Other Relays;
2N7002
Micro Commercial Components
Small Signal Field-Effect Transistors; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Transistor Application: SWITCHING; Maximum Drain Current (ID): .34 A; Package Style (Meter): SMALL OUTLINE;
STM32H753IIT6
STMicroelectronics
STM32H753IIT6 by STMicroelectronics is a 32-bit microcontroller with 176 terminals, operating at up to 48 MHz. It features 20-Ch 16-Bit ADCs and 2-Ch 12-Bit DACs, suitable for industrial applications requiring high-speed data processing and connectivity via CAN, ETHERNET, USB, and more.
M24308/2-1F
TE Connectivity
TE Connectivity's M24308/2-1F D-Sub Connector features 9 contacts, 2 rows, and a shell size of 1/E. With a rated current of 7.5A, it operates b/w -55°C to 125°C. Ideal for cable mounting applications, this connector has a steel shell with cadmium finish and uses crimp termination for female contact pins.
SMBJ18CA
Sangdest Microelectronics (Nanjing)
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
FDLL4148
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Good-ark Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Hitachi
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Esterline Technologies
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mounting Option-1: HOLE .115-.125; Mounting Type: CABLE AND PANEL; Mating Contact Finish: NOT SPECIFIED;
Sipex
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Peak Reflow Temperature (C): 240; Terminal Finish: TIN LEAD;
Mde Semiconductor
NDT2955
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 3 W; Package Style (Meter): SMALL OUTLINE; Maximum Drain Current (Abs) (ID): 2.5 A;
Sun Wai Electronic
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Reverse Recovery Time: .004 us; Maximum Repetitive Peak Reverse Voltage: 100 V;
131-3693-116
Bel Fuse
Bel Fuse 131-3693-116 is a RF SMB connector with 50 ohm impedance, suitable for RG-405 cable types. It offers low insertion loss of 0.6 dB and high durability with 500 cycles. Ideal for commercial applications requiring reliable connections up to 4 GHz frequency.
131-3303-501
Johnson Components
RF SMB CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Additional Features: APPLICABLE CABLES: RG 161/U; RG 174, CAPTIVE CONTACT, INSERTION LOSS MAX AT 1.5 GHZ; Insulator Material: POLYTETRAFLUOROETHYLENE; Characteristic Impedance: 50 ohm;
SMB1252B1-3GT30G-50
Amphenol
Amphenol SMB1252B1-3GT30G-50 is an RF SMB connector with gold over nickel finish. It features snap coupling, PTFE insulator, and solder termination. Ideal for board mounting applications requiring male contact gender in a right-angle jack configuration.
1-2345654-1
TE Connectivity 1-2345654-1 is a SSMB Connector with dimensions of 1.079" x 0.386" x 0.655". It has PBT-POLYESTER insulator, operates b/w -40°C to 125°C, and features polarized SMB connector type. Ideal for cable mounting applications with crimp termination, suitable for 115/230VAC mains connectors.
131-3701-261
FA1-NHSJ-C04-0
RF SMB CONNECTOR; Manufacturer Series: FA1;
5415006-1
TE Connectivity 5415006-1 is an RF SMB connector with 50 ohm impedance, 0.3 dB insertion loss, and 1.25 VSWR. Ideal for commercial applications, it has a durability of 500 cycles and operates b/w -65 to 165°C.
1-413985-1
Tyco Electronics Amp
RF SMB CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Contact Finish: GOLD; Insertion Loss: .3 dB; Maximum Operating Frequency: 4 GHz;
5414337-1
TE Connectivity's 5414337-1 RF SMB Connector features 0.3 dB Insertion Loss, SNAP Coupling Type, and POLYTETRAFLUOROETHYLENE Insulator Material. Ideal for applications requiring a 50 ohm Characteristic Impedance, this connector operates b/w -65 to 165 °C with a max frequency of 4 GHz.
1-1337482-0
TE Connectivity 1-1337482-0 is a RF SMB CONNECTOR with characteristic impedance of 50 ohm. It has PTFE insulator, gold shell finish, and operates b/w -65 to 165 °C. Ideal for applications requiring high frequency up to 4 GHz, such as in board mounting configurations.
R114665000W
Radiall S A
The Radiall S A R114665000W is a RF SMB connector with gold-plated contacts and PTFE insulator. It has a 50 ohm impedance, operates up to 4 GHz, and features snap coupling for easy installation. Ideal for board mounting in applications requiring MIL and IEC conformity.
B51-328-9019AU0
Itt Cannon
B51-328-9019AU0 by ITT Cannon is an RF SMB Connector with 50 ohm impedance, 0.25 dB insertion loss, and gold termination contact finish. Ideal for applications requiring MIL conformity, this snap-coupling connector features a right-angle mounting style and operates up to 4 GHz frequency.
2FA1-NDSJ-C04-0
RF SMB CONNECTOR; Manufacturer Series: 2FA1;
1-2345654-0
TE Connectivity 1-2345654-0 is a SSMB Connector with dimensions of 1.079" x 0.386" x 0.655". It has PBT-POLYESTER insulator, operates b/w -40 to 125°C, and features SMB connector type for cable mounting. Suitable for applications requiring polarized female connectors with crimp termination.
131-3711-201
Ef Johnson
RF SMB CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Maximum Operating Frequency: 4 GHz; Mating Contact Finish: GOLD (30); MIL Conformity: NO;
A51-451-0000220
A51-451-0000220 by ITT Cannon is an RF SSMB connector with a characteristic impedance of 50 ohm and insertion loss of 0.3 dB. It features a max operating frequency of 4 GHz, making it ideal for commercial applications requiring high-frequency signal transmission on boards. With a durability of 500 cycles and snap coupling type, this connector offers reliable performance in various electronic systems.
5414363-5
TE Connectivity's 5414363-5 RF SMB Connector has a body diameter of 0.25", insertion loss of 0.3 dB, and insulation resistance of 1e9 ohm. Ideal for applications requiring a durable right angle plug with characteristic impedance of 50 ohm, suitable for cables like RG 188, RG 174, and RG 316. Operating temperature ranges from -65 to 165 °C.
RF SMB CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Panel Mount: NO; Mounting Type: BOARD; Coupling Type: SNAP;
R114005000
The Radiall S A R114005000 SSMB Connector features low insertion loss of 0.05 dB and gold termination contact finish. With MIL and IEC conformity, it has a snap coupling type for RF SMB applications up to 4 GHz frequency range. Ideal for cable mounting with 50 ohm impedance, this female plug connector offers reliable performance in various RF systems.
73100-0157
Molex
Molex 73100-0157 is an RF SMB connector with a characteristic impedance of 75 ohm and max operating frequency of 4 GHz. It features a SNAP coupling type, POLYTETRAFLUOROETHYLENE insulator material, and is ideal for board mounting applications requiring low Voltage Standing Wave Ratio.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Vertiv
RF SMB CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Insulator Material: PERFLUOROALKOXY/POLYTETRAFLUOROETHYLENE; Insertion Loss: .3 dB;
Bel Fuse 131-3711-201 is a RF SMB connector with 50 ohm impedance, 1400VAC dielectric voltage, and -65 to 165 °C operating range. Ideal for commercial applications requiring durable, male contact right angle mounting on boards at up to 4 GHz frequency.
Cinch Connectivity Solutions
RF SMB CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Termination Type: SURFACE MOUNT; DIN Conformance: NO; MIL Conformity: NO;
131-3701-811
RF SMB CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Coupling Type: SNAP; Maximum Operating Frequency: 4 GHz; Mounting Style: STRAIGHT;
RF SMB CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 1400VAC; Durability: 500 Cycles; Shell Material: BRASS;
RF SMB CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Maximum Operating Frequency: 4 GHz; Mounting Style: STRAIGHT; Insulator Material: PERFLUOROALKOXY/POLYTETRAFLUOROETHYLENE;
RF SMB CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Termination Contact Finish: GOLD (30); Coupling Type: SNAP; Termination Type: SURFACE MOUNT;
RF SMB CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; MIL Conformity: NO; Insertion Loss: .3 dB; Body or Shell Style: RECEPTACLE;
RF SMB CONNECTOR; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1400VAC; Body Depth: .545 inch; Maximum Operating Temperature (Cel): 165;
RF SMB CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1400VAC; Insulator Material: PERFLUOROALKOXY/POLYTETRAFLUORO ETHYLENE;
RF SMB CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Termination Type: SOLDER; Panel Mount: NO; Mounting Style: RIGHT ANGLE;
RF SMB CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Insertion Loss: .6 dB; Body or Shell Style: PLUG; Termination Contact Finish: NICKEL;
RF SMB CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Panel Mount: NO; JESD-609 Code: e4; Insulator Material: POLYTETRAFLUOROETHYLENE;
RF SMB CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Maximum Operating Frequency: 4 GHz; Body or Shell Style: JACK; Mounting Type: CABLE AND PANEL;
RF SMB CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Insulator Material: POLYTETRAFLUOROETHYLENE; Termination Contact Finish: GOLD (30); Maximum Operating Frequency: 4 GHz;
RF SMB CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mounting Style: RIGHT ANGLE; Mating Contact Finish: GOLD (30); Voltage Standing Wave Ratio: 1.51;
RF SMB CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 1400VAC; Total No. of Contacts: 1; Insertion Loss: .6 dB;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved