Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
CONNECTOR ACCESSORY;
Median Price
$2.210
Lifecycle Status
Suppliers In-Stock
7
In-Stock Inventory
1k+
Master Electronics
1+ parts
-
100+ parts
$1.960
1k+ parts
$1.690
10k+ parts
Verical
$2.459
$2.158
Nova Conductors
$1.303
IBS Electronics
$2.772
$2.390
Electro Sonic
$1.646
$1.404
$0.947
VNN
Vyrian
Continental Prestige Electronics
$1.277
Argo Parts USA
Netroflash
$1.238
$1.212
Ampacity Inc.
$1.930
Assembly Products 192900-0465 attributes and parameters. Explore more Assembly Products devices from ITT Cannon
Connector Accessory Type:
From the invention of the rack-and-panel and D-sub connectors to the latest miniaturized products, ITT Cannon provides innovative interconnect solutions to customers around the world. From our global manufacturing locations we serve a wide range of markets, including commercial aviation, defense, energy, industrial, medical, oil & gas, transportation, and space.
FDC5614P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.6 W; Transistor Application: SWITCHING; Maximum Drain Current (ID): 3 A;
LM317T
Samsung
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Load Regulation (%): 1.5 %; Operating Temperature (TJ-Min): 0 Cel; Maximum Line Regulation (%/V): .07;
M39029/56-351
TE Connectivity
TE Connectivity's M39029/56-351 is a CRIMP contact type backshell accessory with rated voltage of 115V. It operates b/w -65 to 175 °C, suitable for MIL-C-39029/56 connectors with wire gauge ranging from 28 to 22 AWG. Ideal for military applications requiring female contacts and copper alloy material.
USB2514BI-AEZG
Microchip Technology
USB2514BI-AEZG by Microchip is a BUS CONTROLLER IC with 36 terminals, operating at 3.3V, supporting I2C, SMBUS, and USB buses. It has a clock frequency of up to 24MHz and can withstand industrial temperatures from -40°C to 85°C. This chip carrier package is surface mountable and suitable for various applications requiring USB connectivity.
LL4148
Sinyork
RECTIFIER DIODE; Surface Mount: YES; Config: SINGLE; No. of Phases: 1; No. of Elements: 1; Maximum Repetitive Peak Reverse Voltage: 100 V;
SMBJ18CA
Jgd Semiconductors
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Polarity: BIDIRECTIONAL; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.2 V; Maximum Repetitive Peak Reverse Voltage: 18 V;
BSS138-TP
Micro Commercial Components
BSS138-TP by Micro Commercial Components is a N-channel small signal FET with a min DS breakdown voltage of 50V and max drain current of 0.22A. It is commonly used in applications requiring enhancement mode operation, such as power management and switching circuits.
1N4148
NXP Semiconductors
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
CRG0805F10R
TE Connectivity's CRG0805F10R is a 10 ohm fixed resistor with 1% tolerance and 0.125 W power dissipation. It features thick film technology, SMT package style, and matte tin over nickel terminal finish. Ideal for surface mount applications in electronics, offering a temperature coefficient of 200 ppm/°C and operating voltage of 150 V.
LM358N
Motorola
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
BAV99
Cheng-yi Electronic
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Shape: RECTANGULAR; Terminal Position: DUAL;
Kec
Db Lectro
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SS14
Silicon Standard
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
CRCW04020000Z0ED
Vishay Intertechnology
Vishay Intertechnology's CRCW04020000Z0ED is a 0 ohm jumper resistor with METAL GLAZE/THICK FILM tech. Operating b/w -55 to 155 °C, it suits SMT applications in automotive electronics due to AEC-Q200 compliance and 0.063 W power dissipation.
2N7002
Philips Semiconductors
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Moisture Sensitivity Level (MSL): 1; Maximum Operating Temperature: 150 Cel;
Weitron Technology
RECTIFIER DIODE; Surface Mount: NO; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; Maximum Output Current: .15 A; Terminal Finish: Tin/Lead (Sn/Pb);
LM7805CT/NOPB
National Semiconductor
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Voltage Tolerance: 5 %; Operating Temperature (TJ-Max): 125 Cel; Maximum Output Voltage-1: 5.25 V;
ULN2803ADW
Texas Instruments
ULN2803ADW by Texas Instruments is a peripheral driver with 8 functions, open-collector output characteristics, and built-in transient protections. It operates b/w -40 to 85 °C and has a max supply voltage of 3 V. Ideal for applications requiring buffer or inverter-based peripheral drivers with sink current flow direction.
50058-8000
Molex
The Molex 50058-8000 is a female crimp contact with bellowed design, made of phosphor bronze. It has a finish thickness of 35 and supports wire sizes from 32 to 28 AWG. Ideal for use in applications requiring the 51021 housing with a min cable entry of 0.02 inch and max cable entry of 0.039 inch.
1-770904-1
TE Connectivity's 1-770904-1 plug housing has approvals from CSA and UL, rated for 600V with a max operating temp of 105°C. It features stranded construction, crimp terminals, and is designed for power applications with female contacts.
1731120248
CONNECTOR ACCESSORY; Usage: FCT D-SUB; DIN Conformity: NO; Mounting Option-2: SCREW; Assembly Item Name: SCREW LOCK; MIL Conformity: NO;
DF11-2428SCF
Hirose Electric
4-1437284-3
CONNECTOR ACCESSORY; Wire Gauge (AWG): 0; Maximum Operating Temperature: 125 Cel; Maximum Wire Size: 0 AWG; Minimum Operating Temperature: -40 Cel;
1-206062-4
TE Connectivity's 1-206062-4 CLAMP KIT features Shell Size 11, accommodates up to 0 AWG wire size, and has a max cable entry of 0.329". Ideal for straight mounting with polyethylene material, it uses a 5/8-24 UNEF-2B screw for installation in various assembly products.
G125-0010005
Harwin Plc
G125-0010005 by Harwin PLC is a female contact with round pin-socket style, made of beryllium copper. It has a rated current of 2.8A and can handle up to 450V AC/DC voltage. With a terminal length of 0.079 inch, it is ideal for signal applications requiring crimp terminals in assemblies with 0.031 inch cable entry.
02-09-2116
Molex 02-09-2116 is a male contact with round pin-socket design, made of brass material. It has a terminal length of 0.24 inch and supports wire sizes from 22 AWG to 18 AWG. Ideal for applications requiring a straight mounting style and crimp terminal type.
WM-4S
TE Connectivity's WM-4S is a POWER AND SIGNAL WEDGE ITEM for DTM SERIES assemblies. It supports wire sizes up to 0 AWG, with a temp range of -55 to 125°C. Made of POLYBUTYLENE TEREPHTHALATE, it ensures reliable connections in various applications.
AT60-202-20141
Amphenol
163557-2
The TE Connectivity 163557-2 is a MATE-N-LOK HOUSING with CRIMP terminals. It supports wire sizes from 22 AWG to 18 AWG and rated for 15A current at 250V AC. Ideal for power applications, it features FEMALE contacts with ROUND PIN-SOCKET design and BRASS material construction.
DF11-22SC
112263-90
TE Connectivity's 112263-90 is an Assembly Product with HD30 Series Connector. It features Female Contact Gender, Aluminum Material, and supports up to 0 AWG wire size. With a temperature range of -55 to 125°C, it is ideal for various industrial applications.
1050017:0001
Phoenix Contact
TERMINAL BLOCK ACCESSORY; DIN Conformity: NO; IEC Conformity: NO; MIL Conformity: NO; Manufacturer Series: 1050017:0001; Assembly Item Name: TERMINAL MARKER;
AW12S
AW12S by Amphenol is an assembly product designed for AT series connectors. It has a temperature range of -55°C to 125°C, with polyethylene material. Supports wire sizes from 20 AWG to 14 AWG, making it ideal for various industrial applications.
02-08-2004
Molex 02-08-2004 is a CRIMP FEMALE CONTACT with STRAIGHT MOUNTING STYLE. Made of BRASS, it features SQ PIN-SKT CONTACT STYLE. Ideal for assembly products requiring secure electrical connections in various applications.
33001-3004
Molex 33001-3004 CONTACT features CRIMP terminal type for 20-18 AWG wire sizes. FEMALE gender, BELLOWED TYPE contact style with STRAIGHT mounting. Ideal for assembly products requiring 30 finish thickness in various applications.
39-00-0041
Molex 39-00-0041 contact features crimp terminal type, brass material, and square pin-socket design. Ideal for 5559, 30068, 42475 series housing with wire sizes ranging from 24 to 18 AWG. Suitable for applications requiring male contact gender and straight mounting style.
1-1743447-2
TE Connectivity 1-1743447-2 features COMPLIANT FIT terminals, STAMPED contact design, and supports wire sizes up to 0 AWG. With a temperature range of -40°C to 125°C, it is ideal for applications requiring reliable male contacts in assembly products.
1SET111008R0000
TE Connectivity's 1SET111008R0000 is a STRANDED assembly product with POLYPROPYLENE insulator. It supports up to 16 AWG wire gauge and operates at max 105°C temperature. Ideal for applications requiring DISCRETE WIRE connections with STRAIGHT mounting style.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
1-929939-1
CONNECTOR ACCESSORY; Manufacturer Series: 929939;
192991-0059
ITT Cannon
ITT Cannon's 192991-0059 is a contact assembly product with a finish thickness of 120. It features a crimp terminal type and machined contact design, making it suitable for applications requiring a max wire size of 16 AWG and rated current of 13 A. Its straight mounting style and round pin-socket contact style make it ideal for use in various industries.
192990-2530
192993-0084
CONNECTOR ACCESSORY; Approvals (V): UL; Material: ALUMINUM ALLOY; DIN Conformity: NO; Assembly Item Name: ENDBELL; IEC Conformity: NO;
192990-0110
CONNECTOR ACCESSORY; Rated Current: 13 A; Contact Design: STAMPED, LOOSE; Assembly Item Name: CONTACT; DIN Conformity: NO; Material: BRASS;
192900-0457
192993-0633
192990-0090
CONNECTOR ACCESSORY; Rated Current: 13 A; MIL Conformity: NO; Contact Design: LOOSE; Material: BRASS; Minimum Wire Size: 26 AWG;
1-929937-1
CONNECTOR ACCESSORY; Manufacturer Series: 929937;
192990-0070
ITT Cannon's 192990-0070 is a CRIMP FEMALE CONTACT with SQ PIN-SKT style made of BRASS. It is used in STRAIGHT mounting applications for Assembly Products.
192900-0187
192990-2490
ITT Cannon's 192990-2490 is a male contact assembly product with stamped design, made of brass. It supports wire sizes ranging from 18 AWG to 16 AWG and can handle a rated current of 13 A. This contact is commonly used in various applications requiring reliable electrical connections.
192990-2520
192900-0286
192990-0060
CONNECTOR ACCESSORY; Rated Current: 13 A; MIL Conformity: NO; Contact Design: STAMPED; Minimum Wire Size: 18 AWG; Contact Gender: MALE;
192991-0058
ITT Cannon's 192991-0058 contact features a CRIMP terminal type, MACHINED contact design, and 120 finish thickness. Ideal for applications requiring FEMALE contacts with 20 AWG wire size, rated at 13 A current. Suitable for STRAIGHT mounting style in various assembly products.
192900-0498
192900-0668
192900-0669
192900-0633
CONNECTOR ACCESSORY; Rated Current: 13 A; MIL Conformity: NO; Material: BRASS; DIN Conformity: NO; Assembly Item Name: CONTACT;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved