Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
OTHER FIFO; Temperature Grade: COMMERCIAL; No. of Terminals: 28; Package Code: SOP; Package Shape: RECTANGULAR; Qualification: Not Qualified;
Median Price
$12.160
Lifecycle Status
Suppliers In-Stock
3
In-Stock Inventory
1k+
Nova Conductors
1+ parts
100+ parts
-
1k+ parts
10k+ parts
VNN
Vyrian
AZTECH Wire
$8.328
Ampacity Inc.
$10.000
Aranea Global
$11.917
$11.440
Continental Prestige Electronics
Microchip USA
$35.538
Argo Parts USA
FIFO 7200L12SOG8 attributes and parameters. Explore more FIFO devices from Integrated Device Technology
Maximum Access Time:
Additional Features:
Maximum Clock Frequency (fCLK):
Cycle Time:
JESD-30 Code:
JESD-609 Code:
Length:
Memory Density:
Memory IC Type:
Memory Width:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Terminals:
No. of Words:
No. of Words Code:
Operating Mode:
Maximum Operating Temperature:
Minimum Operating Temperature:
Organization:
Output Enable:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Parallel or Serial:
Peak Reflow Temperature (C):
Power Supplies (V):
Qualification:
Maximum Seated Height:
Maximum Standby Current:
Sub-Category:
Maximum Supply Current:
Maximum Supply Voltage (Vsup):
Minimum Supply Voltage (Vsup):
Nominal Supply Voltage / Vsup (V):
Surface Mount:
Technology:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Width:
7200L12SOG8 Memory ICs trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.32.00.71
SB
8542.32.00.70
PCN Design/Specification - All Dev Label Chg 1/Dec/2022 Mult Dev Marking/MSL Chgs 17/Sep/2019
Renesas Electronics Corporation (TSE: 6723, “Renesas”), a premier supplier of advanced semiconductor solutions, and Integrated Device Technology, Inc. (“IDT”), a leading supplier of analog mixed-signal products, including sensors, connectivity and wireless power, today jointly announced the successful completion of Renesas’ acquisition of IDT, as of March 30, 2019 JST, March 29, 2019 PDT, following approvals by IDT shareholders and the relevant regulatory authorities.
ESD5Z5.0T1G
Onsemi
ESD5Z5.0T1G by Onsemi is a unidirectional Trans Voltage Suppressor Diode with 5V reverse test voltage and 174W peak power dissipation. It is used for transient suppression in electronic circuits, meeting IEC-61000-4-2, 4-4 standards and UL recognized for reliability.
LM358N
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
BSS123NH6327XTSA1
Infineon Technologies
Infineon BSS123NH6327XTSA1 is a N-CHANNEL FET with 100V DS breakdown voltage, 0.19A ID, and 6 ohm RDS(on). Ideal for small outline applications requiring high drain current and low on-resistance. AEC-Q101 compliant for automotive use.
C0603X104K5RACAUTO
KEMET Corporation
C0603X104K5RACAUTO by KEMET Corp is a ceramic capacitor with capacitance of 0.1 uF and rated DC voltage of 50 V. It has a temperature coefficient of 15% and can operate b/w -55 to 125 °C. This SMT package is commonly used in automotive applications due to its AEC-Q200 reference standard.
ULN2803A
Rochester Electronics
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Additional Features: LOGIC LEVEL COMPATIBLE; Qualification: Not Qualified;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
Silicon Group
C0603C104K5RACAUTO
KEMET C0603C104K5RACAUTO is a ceramic capacitor with 0.1uF capacitance, rated for 50V. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for automotive applications meeting AEC-Q200 standard, it comes in SMT package with matte tin finish and wraparound terminals.
BSS138LT1G
BSS138LT1G by Onsemi is a N-CHANNEL FET with 50V DS Breakdown Voltage, 0.2A Drain Current, and 3.5 ohm On Resistance. Ideal for SWITCHING applications due to its ENHANCEMENT MODE operation and built-in DIODE. Operates b/w -55 to 150 °C with small outline package style for surface mount assembly.
M24308/2-1F
Cristek Interconnects
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Rows Loaded: 2; Shell Size: 1/E; Filter Feature: NO;
1554216004
Molex
WIRE AND CABLE;
BSS138W-7-F
Multicomp Pro
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Transistor Element Material: SILICON; No. of Elements: 1;
1N4148
Hy Electronic
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Texas Instruments
ULN2803A by Texas Instruments is a peripheral driver with 8 functions. It has a max supply voltage of 3V and can operate in temperatures ranging from -40 to 85°C. This IC is commonly used as a buffer or inverter based peripheral driver for various applications.
2N2222A
Crimson Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Micro Commercial Components
LL4148
International Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
LM317LMX/NOPB
LM317LMX/NOPB by Texas Instruments is an adjustable positive single output standard regulator with a max input-output voltage differential of 40V. It operates in temperatures ranging from -40°C to 125°C and has a max output current of 0.1A, making it suitable for various applications requiring precise voltage regulation.
NC7WZ17P6X
Fairchild Semiconductor
BUFFER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 6; Package Code: TSSOP; Package Shape: RECTANGULAR;
MBRS360T3G
MBRS360T3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.63V and a max output current of 3A. It is designed for applications requiring high-speed switching and low power loss, making it suitable for use in various electronic devices.
SN74ACT72211L-50RJR
SN74ACT72211L-50RJR by Texas Instruments is a FIFO chip with 512x9 organization, operating at 5V. It features a cycle time of 50ns and max clock frequency of 20MHz, suitable for synchronous applications. This CMOS technology memory IC has a memory density of 4608 bits and supports parallel operation with output enable functionality.
SN54ABT3614GB
SN54ABT3614GB by Texas Instruments is a FIFO with 128x36 organization, operating at 5V. It features a cycle time of 20ns and operates in synchronous mode. Ideal for military applications due to its MIL-STD temperature range and BICMOS technology.
SN74ABT3613PCB
SN74ABT3613PCB by Texas Instruments is a FIFO with 64x36 organization, operating at 5V. It has a cycle time of 30ns and max access time of 15ns. This synchronous device in a square package is ideal for applications requiring fast data storage and retrieval.
7202LA20LB8
Renesas Electronics
Renesas Electronics' 7202LA20LB8 is a CMOS FIFO chip carrier with 1Kx9 organization, operating at 33.3MHz clock frequency and 30ns cycle time. Ideal for military applications due to MIL-STD-883 Class B screening level, it features asynchronous operation and offers a memory density of 9216 bits.
SN74ABT3613-30PQR
SN74ABT3613-30PQR by Texas Instruments is a FIFO with 64x36 organization, 30 ns cycle time, and 5V nominal voltage. It is used in applications requiring fast data transfer and storage, such as communication systems and high-speed computing devices.
SN74ACT7202LA-15DVR
SN74ACT7202LA-15DVR by Texas Instruments is a FIFO with 1KX9 organization, 25 ns cycle time, and 5V nominal voltage. It operates in asynchronous mode and has a memory density of 9216 bit. This device is ideal for applications requiring fast data storage and retrieval in commercial temperature environments.
SN74ABT7819-20PN
SN74ABT7819-20PN by Texas Instruments is a FIFO memory with 512x18 organization, operating at 20ns cycle time and 50MHz clock frequency. It is used in applications requiring fast data storage and retrieval, featuring a 3-STATE output characteristic and GULL WING terminal form for parallel communication.
72V241L10PFG8
Integrated Device Technology
OTHER FIFO; Temperature Grade: COMMERCIAL; No. of Terminals: 32; Package Code: LQFP; Package Shape: SQUARE; Minimum Operating Temperature: 0 Cel;
SN74ACT2235-30PM
SN74ACT2235-30PM by Texas Instruments is a FIFO memory with 1Kx9 organization, 30ns cycle time, and operates at 5V. It features a 33MHz clock frequency, GULL WING terminals, and is suitable for applications requiring fast data storage and retrieval in commercial temperature environments.
SN74ACT3651-30PCB
SN74ACT3651-30PCB by Texas Instruments is a FIFO memory IC with 2Kx36 organization, operating at 30ns cycle time and 33.4MHz clock frequency. It features a parallel interface, synchronous operation, and output enable function. Ideal for applications requiring fast data storage and retrieval in commercial temperature environments.
SN74ACT7813-15DL
SN74ACT7813-15DL by Texas Instruments is a 64x18 FIFO with 15ns cycle time, operating at 5V. It features synchronous operation, 67MHz clock frequency, and 1152-bit memory density. Ideal for applications requiring fast data transfer in commercial-grade environments.
7201LA15JGI8
Renesas Electronics 7201LA15JGI8 FIFO chip features 512x9 organization, operates at 40MHz clock frequency, and has a cycle time of 25ns. Ideal for industrial applications requiring fast data processing with parallel operation and a supply voltage range of 4.5V to 5.5V.
72V211L15PFGI
OTHER FIFO; Temperature Grade: INDUSTRIAL; No. of Terminals: 32; Package Code: LQFP; Package Shape: SQUARE; Nominal Supply Voltage / Vsup (V): 3.3;
74HC40105PW,112
Nexperia
OTHER FIFO; Temperature Grade: AUTOMOTIVE; No. of Terminals: 16; Package Code: TSSOP; Package Shape: RECTANGULAR; Technology: CMOS;
SN74ACT7206L-50DV
SN74ACT7206L-50DV by Texas Instruments is a FIFO memory with 16Kx9 organization, 65ns cycle time, and 15MHz clock frequency. It operates asynchronously at 5V and is ideal for parallel data storage applications in commercial temperature environments.
SN74ACT3638-30PCB
SN74ACT3638-30PCB by Texas Instruments is a FIFO memory with 512x32 organization, 30 ns cycle time, and 33.4 MHz clock frequency. It operates synchronously at 5V and has a low profile flatpack package. Ideal for applications requiring fast data storage and retrieval in commercial temperature environments.
7203L25J8
7203L25J8 by Integrated Device Technology is a FIFO chip with 2KX9 organization, operating at 5V. It features a cycle time of 35ns and max clock frequency of 28.5MHz. Ideal for applications requiring fast data storage and retrieval in commercial temperature environments.
SN54ALS233J
SN54ALS233J by Texas Instruments is a 16x5 FIFO memory IC with 20 terminals, operating at 5V. It has a max clock frequency of 20MHz and can withstand temperatures from -55°C to 125°C. Ideal for military-grade applications requiring asynchronous operation in a ceramic package.
72V261LA10TFG8
The Renesas Electronics 72V261LA10TFG8 FIFO operates in synchronous mode with a cycle time of 10 ns and a clock frequency of up to 100 MHz. It features a memory density of 147456 bit, suitable for applications requiring fast data processing such as networking equipment and telecommunications devices.
72V2105L10PFG8
OTHER FIFO; Temperature Grade: COMMERCIAL; No. of Terminals: 64; Package Code: LQFP; Package Shape: SQUARE; Nominal Supply Voltage / Vsup (V): 3.3;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
7200L12SOG8
OTHER FIFO; Temperature Grade: COMMERCIAL; No. of Terminals: 28; Package Code: SOP; Package Shape: RECTANGULAR; Package Body Material: PLASTIC/EPOXY;
7200L15JGI8
7200L15JGI8 by Integrated Device Technology is a FIFO chip with 256x9 organization, operating at max frequency of 40 MHz. It has a temperature range of -40 to 85°C and consumes up to 80mA supply current. Ideal for industrial applications requiring fast access times within a compact chip carrier package.
7200L15SOGI8
OTHER FIFO; Temperature Grade: INDUSTRIAL; No. of Terminals: 28; Package Code: SOP; Package Shape: RECTANGULAR; Technology: CMOS;
Renesas Electronics 7200L15SOGI8 FIFO operates asynchronously at 5V, with 256x9 organization and 40MHz clock frequency. Ideal for industrial applications requiring fast access times and low standby current.
7200L15SOI8
OTHER FIFO; Temperature Grade: INDUSTRIAL; No. of Terminals: 28; Package Code: SOP; Package Shape: RECTANGULAR; Additional Features: RETRANSMIT;
7200L25JI8
OTHER FIFO; Temperature Grade: INDUSTRIAL; No. of Terminals: 32; Package Code: QCCJ; Package Shape: RECTANGULAR; Output Enable: NO;
7200L25SOI8
OTHER FIFO; Temperature Grade: INDUSTRIAL; No. of Terminals: 28; Package Code: SOP; Package Shape: RECTANGULAR; Memory Width: 9;
7200L15TDGI8
OTHER FIFO; Temperature Grade: INDUSTRIAL; No. of Terminals: 28; Package Code: DIP; Package Shape: RECTANGULAR; Maximum Supply Current: 80 mA;
7200L15JGI
OTHER FIFO; Temperature Grade: INDUSTRIAL; No. of Terminals: 32; Package Code: QCCJ; Package Shape: RECTANGULAR; Terminal Form: J BEND;
7200L15TDI8
7200L15TDGI
OTHER FIFO; Temperature Grade: INDUSTRIAL; No. of Terminals: 28; Package Code: DIP; Package Shape: RECTANGULAR; JESD-30 Code: R-XDIP-T28;
7200L15JG
OTHER FIFO; Temperature Grade: COMMERCIAL; No. of Terminals: 32; Package Code: QCCJ; Package Shape: RECTANGULAR; Technology: CMOS;
7200L15TDI
OTHER FIFO; Temperature Grade: INDUSTRIAL; No. of Terminals: 28; Package Code: DIP; Package Shape: RECTANGULAR; Terminal Pitch: 2.54 mm;
7200L12JG8
OTHER FIFO; Temperature Grade: COMMERCIAL; No. of Terminals: 32; Package Code: QCCJ; Package Shape: RECTANGULAR; Maximum Standby Current: .005 Amp;
7200L15TPG
OTHER FIFO; Temperature Grade: COMMERCIAL; No. of Terminals: 28; Package Code: DIP; Package Shape: RECTANGULAR; Terminal Form: THROUGH-HOLE;
7200L15SOGI
OTHER FIFO; Temperature Grade: INDUSTRIAL; No. of Terminals: 28; Package Code: SOP; Package Shape: RECTANGULAR; Maximum Supply Voltage (Vsup): 5.5 V;
7200L12TDG
OTHER FIFO; Temperature Grade: COMMERCIAL; No. of Terminals: 28; Package Code: DIP; Package Shape: RECTANGULAR; Package Equivalence Code: DIP28,.3;
7200L12JG
OTHER FIFO; Temperature Grade: COMMERCIAL; No. of Terminals: 32; Package Code: QCCJ; Package Shape: RECTANGULAR; Minimum Supply Voltage (Vsup): 4.5 V;
7200L12SOG
OTHER FIFO; Temperature Grade: COMMERCIAL; No. of Terminals: 28; Package Code: SOP; Package Shape: RECTANGULAR; Output Enable: NO;
7200L12SO
OTHER FIFO; Temperature Grade: COMMERCIAL; No. of Terminals: 28; Package Code: SOP; Package Shape: RECTANGULAR; Technology: CMOS;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved