Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
BRUSHLESS DC MOTOR CONTROLLER; Temperature Grade: INDUSTRIAL; No. of Terminals: 4; Package Code: SIP; Package Shape: RECTANGULAR; Surface Mount: NO;
Median Price
-
Lifecycle Status
Suppliers In-Stock
0
In-Stock Inventory
< 1k
Native Components
1+ parts
$0.408
100+ parts
1k+ parts
10k+ parts
$0.392
Northwest PG Solutions
$0.449
$0.396
Glotronic Ltd.
Motion Control ICs AH284-PL attributes and parameters. Explore more Motion Control ICs devices from Integrated Circuit Technology
Other IC type:
JESD-30 Code:
Length:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Maximum Output Current:
Package Body Material:
Package Code:
Package Shape:
Package Style (Meter):
Qualification:
Maximum Seated Height:
Maximum Supply Voltage (Vsup):
Minimum Supply Voltage (Vsup):
Nominal Supply Voltage (Vsup):
Surface Mount:
Temperature Grade:
Terminal Form:
Terminal Pitch:
Terminal Position:
Width (mm):
AH284-PL Other Function Semiconductors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
2N7002
Vishay Intertechnology
2N7002 by Vishay Intertechnology is a N-CHANNEL FET with 60V DS Breakdown Voltage, 0.115A Drain Current, and 7.5 ohm On Resistance. Ideal for SWITCHING applications due to its SINGLE configuration with BUILT-IN DIODE. Operates in ENHANCEMENT MODE, suitable for surface mount with GULL WING terminals.
Changzhou Galaxy Century Microelectronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Minimum DS Breakdown Voltage: 60 V; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; No. of Terminals: 3;
CRCW06031K00FKEAHP
Vishay Intertechnology's CRCW06031K00FKEAHP is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.33 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance and operating voltage of 75 V.
ERJ2RKF1002X
Panasonic
Panasonic's ERJ2RKF1002X is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance and operating temperature range of -55 to 155 °C.
ULN2803A
NPN; Configuration: COMPLEX; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Package Body Material: PLASTIC/EPOXY; JESD-30 Code: R-PDIP-T18;
NXP Semiconductors
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .83 W; JESD-609 Code: e3; Minimum DS Breakdown Voltage: 60 V;
2N2222A
Baneasa S A
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .8 A; Qualification: Not Qualified;
1N4148WT
Diodes Incorporated
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SMBJ18CA
Taiwan Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Rectron
ABS25-32.768KHZ-1-T
Abracon
Abracon's ABS25-32.768KHZ-1-T crystal oscillator offers 10 ppm frequency tolerance, 126% stability, and 50000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal operating frequency, such as IoT devices and precision timing systems.
MBRS130LT3G
Rochester Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: J BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WSF-7
1N4148WSF-7 by Diodes Inc. is a single silicon rectifier diode with max output current of 0.25A and max reverse voltage of 100V. It operates b/w -55 to 150°C, has a small outline package style, and is suitable for surface mount applications in various electronic circuits.
0460-202-16141
TE Connectivity
TE Connectivity's 0460-202-16141 contact features a crimp terminal type, machined contact design, and rated AC voltage of 1500V. With a wire gauge range of 20-16 AWG, it is ideal for applications requiring a male round pin-socket contact style in assembly products.
STM32H753IIT6
STMicroelectronics
STM32H753IIT6 by STMicroelectronics is a 32-bit microcontroller with 176 terminals, operating at up to 48 MHz. It features 20-Ch 16-Bit ADCs and 2-Ch 12-Bit DACs, suitable for industrial applications requiring high-speed data processing and connectivity via CAN, ETHERNET, USB, and more.
Thinking Electronic Industrial
M85049/85-08W02
CONNECTOR ACCESSORY; Minimum Operating Temperature: -65 Cel; Wire Gauge (AWG): 0; Maximum Wire Size: 0 AWG; Maximum Operating Temperature: 175 Cel; Material: ALUMINUM ALLOY;
Supertex
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; No. of Elements: 1; Maximum Feedback Capacitance (Crss): 5 pF;
AB26TRB-32.768KHZ--T
AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.
BAV99
Weitron Technology
RECTIFIER DIODE; Surface Mount: YES; Maximum Operating Temperature: 150 Cel; Maximum Output Current: .215 A; JESD-609 Code: e0; Maximum Forward Voltage (VF): .715 V;
TC647BEOA
Microchip Technology
Microchip TC647BEOA is a Motion Control IC with 8 terminals, operating voltage of 3.3-5V, and temp range -40 to 85°C. Ideal for Brushless DC Motor control applications due to small outline package and industrial temperature grade suitability. Features matte tin finish, gull wing terminals, and moisture sensitivity level of 3.
PDRV8847SPWR
Texas Instruments
STEPPER MOTOR CONTROLLER;
L6235PD
L6235PD by STMicroelectronics is a Motion Control IC with 36 terminals, operating voltage of 8-52V, and max output current of 5.6A. Ideal for automotive applications, this BCDMOS technology IC offers precise control for brushless DC motor controllers in compact dimensions.
VNH7100BASTR
VNH7100BASTR by STMicroelectronics is a Motion Control IC with 16 terminals, operating voltage range of 4-28V, and max output current of 15A. Ideal for Brush DC Motor control applications due to AEC-Q100 screening, small outline package style, and dual terminal position.
LB1909MC-BH
Onsemi
LB1909MC-BH by Onsemi is a Motion Control IC with 12V supply voltage, 10 terminals, and 35mA supply current. It operates b/w -30 to 85°C and has a peak reflow temperature of 260°C. Ideal for applications requiring precise motion control in compact designs.
DRV8411RTER
DRV8411RTER by Texas Instruments is a Motion Control IC with 16 terminals, operating voltage range of 1.65V to 11V, and max output current of 4A. It is ideal for brush DC motor control applications due to its compact chip carrier package and wide temperature range (-40°C to 125°C).
IRMCF341TY
Infineon Technologies
Infineon's IRMCF341TY is a Motion Control IC with 64 terminals, operating at 3.3V. It features a low profile flatpack package, suitable for AC motor control applications in industrial settings. With a temperature range of -40 to 85°C and compact dimensions of 10x10mm, it offers precise control in various environments.
TMC5072-LA
Trinamic Motion Control & Kg
TMC5072-LA by Trinamic is a Motion Control IC with 2 functions, operating at -40 to 125 °C. Ideal for automotive applications, it offers a max output current of 2A and operates on a supply voltage range of 4.6V to 5.25V.
FSBB20CH120D
FSBB20CH120D by Onsemi is a Motion Control IC with 27 terminals, Vsup ranging from 300V to 800V. It operates b/w -40°C to 125°C, suitable for automotive applications. This AC Motor Controller has a max output current of 40A and uses hybrid technology.
DRV11873PWPR
DRV11873PWPR by Texas Instruments is a motion control IC with 16 terminals and a supply voltage range of 5-16V. It features a max output current of 2A, operating temperature range of -40 to 85°C, and terminal finish in nickel palladium gold. Ideal for industrial applications requiring precise brushless DC motor control in compact spaces.
TLE5205-2GP
TLE5205-2GP by Infineon: 6A max output current, 40V max supply voltage, BCDMOS technology. Ideal for brush DC motor control applications due to small outline package and dual terminal position. Supports supply voltages from 6V to 18V with matte tin finish and gull wing terminals.
DRV8841PWPR
Texas Instruments' DRV8841PWPR is a Motion Control IC with 28 terminals, supporting supply voltages from 8.2V to 45V. It features a max output current of 2.5A and operates in industrial temperatures (-40°C to 85°C). Ideal for stepper motor control applications, this IC comes in a small outline package with gull wing terminals.
LV8827LFQA-NH
LV8827LFQA-NH by Onsemi is a Motion Control IC with 24V supply voltage, 1.5A output current, and BICMOS technology. Ideal for Brushless DC Motor Controllers, it operates b/w -40 to 80°C and has a compact square package with matte tin finish.
DRV8424EPWPR
DRV8424EPWPR by Texas Instruments is a Motion Control IC with 28 terminals, operating at -40 to 125°C. It features a max output current of 2.5A and supports stepper motor control applications. This small outline IC has a package size of 9.7mm x 4.4mm x 1.2mm, making it suitable for automotive use with a supply voltage range of 0-5.5V.
A3983SLPTR
Allegro MicroSystems
Allegro MicroSystems' A3983SLPTR is a Motion Control IC with 24 terminals, operating voltage of 3-5.35V, and max output current of 2A. Ideal for stepper motor control applications due to its BCDMOS technology, compact size (7.8mm x 4.4mm), and temp range of -20°C to 85°C.
DRV8872DDARQ1
DRV8872DDARQ1 by Texas Instruments is a Motion Control IC with 24V nominal voltage and 3.5A max output current. Ideal for automotive applications, it features AEC-Q100 screening level, -40 to 125°C operating temperature range, and GULL WING terminal form.
L6226PDTR
STMicroelectronics L6226PDTR is a Motion Control IC with 36 terminals, operating voltage of 8-52V. It's a Brushless DC Motor Controller in small outline package suitable for automotive applications. Features include 2.8A output current, BCDMOS technology, and temp range -40 to 150°C.
DRV8835DSST
DRV8835DSST by Texas Instruments is a motion control IC with 12 terminals, operating at 3-7V. It offers a max output current of 1.5A and supports brush DC motor control applications. The small outline package with a very thin profile makes it suitable for compact designs requiring precise motion control.
DRV8424ERGER
DRV8424ERGER by Texas Instruments is a Motion Control IC with 24 terminals, operating at -40 to 125°C. It features a max output current of 2.5A and supports stepper motor control applications. This chip carrier package with a very thin profile is suitable for automotive use, offering a supply voltage range of 0-5.5V.
A3909GLYTR-T
Allegro MicroSystems' A3909GLYTR-T is a Motion Control IC with 10 terminals, operating voltage range of 4-18V, and max output current of 1A. Ideal for industrial applications requiring precise control over voice coil motors, it features a compact square package suitable for surface mount assembly. With an operating temperature range from -40 to 105°C, this IC offers reliable performance in various environments.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Integrated Circuit Technology
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved