Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SCR; Package Style (Meter): FLANGE MOUNT; Surface Mount: NO; Terminal Position: UPPER; Configuration: SERIES CONNECTED, CENTER TAP, 2 ELEMENTS; Case Connection: ISOLATED;
Median Price
-
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
< 1k
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
Digiode
Modulus Dynamics
$4.595
$4.411
$4.227
Corphita
Silicon Controlled Rectifiers (SCR) TT310N24KOFHPSA1 attributes and parameters. Explore more Silicon Controlled Rectifiers (SCR) devices from Infineon Technologies
Case Connection:
Configuration:
Maximum DC Gate Trigger Current:
JESD-30 Code:
No. of Elements:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Maximum RMS On-state Current:
Reference Standard:
Repetitive Peak Off-state Voltage:
Repetitive Peak Reverse Voltage:
Surface Mount:
Terminal Form:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Trigger Device Type:
TT310N24KOFHPSA1 Triggering Devices trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8541.30.00.80
SB
Infineon Technologies AG is a leading global semiconductor manufacturer and provider of comprehensive solutions for automotive, industrial, and consumer applications. Founded in 1999, the company has grown to become one of the largest semiconductor manufacturers in Europe. Infineon is headquartered in Neubiberg, Germany with operations across countries in Europe and Asia Pacific. Infineon provides microelectronics products that address many of today's societal challenges affecting energy efficiency, mobility, security and connectivity. Over the past two decades Infineon has become a major player in the semiconductor industry with an impressive portfolio of innovative technologies. As one of only four companies that produce DRAM chips for automobiles, Infineon produces cutting-edge processors for use in advanced driver assistance systems (ADAS). Likewise, they specialize in providing advanced embedded secure microcontrollers that are essential for connected devices. Furthermore, they offer integrated circuit solutions for industrial power control such as motor controllers and embedded gate drivers.
CEO
Jochen Hanebeck
Chief Financial Officer
Sven Schneider
Chief Marketing Officer
Andreas Urschitz
Villach 300mm
Fabrication
Fab Initiation
2011
Austria
Villach
Wafer Capacity
11,000
Kulim 2
2016
Malaysia
Kulim
79,500
Dresden - Module 3
1999
Germany
Dresden
58,000
Villach Building
2,000
Regensburg
1986
60,000
Dresden 200 - Module 1
1995
28,000
Dresden 200 - Module 2
1996
Building 38
2005
500
Building 47
Kulim 1
2006
110,000
Mesa Facility
1990
USA
Mesa
3,000
Villach 150mm
1981
35,000
Villach 200mm
68,000
Temecula
30,000
2021
2018
5,000
Kulim 3
2024
Fab 25
Austin
31,000
Dresden - Module 4
2026
1554216004
Molex
WIRE AND CABLE;
M39029/58360
Esterline Technologies
CONNECTOR ACCESSORY; Terminal Type: CRIMP; Removal Tools: M81969/14-01; Associated Military - Specifications: MIL-DTL-38999; IEC Conformity: NO; MIL-Connector Accessory Name: CONTACT;
M39029/56351
CONNECTOR ACCESSORY; IEC Conformity: NO; Contact Gender: FEMALE; DIN Conformity: NO; MIL-Connector Accessory Name: CONTACT; Tool Settings: M22520/2-10;
LM358D-T
NXP Semiconductors
LM358D-T by NXP Semiconductors is a dual operational amplifier with 70dB CMRR, 1000kHz unity gain bandwidth, and 9000uV max input offset voltage. Widely used in commercial applications due to its small outline package and low bias current of 0.5uA.
2N2222A
Itt Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
BSS138
Taitron Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3.5 ohm; Maximum Drain Current (ID): .2 A; Peak Reflow Temperature (C): NOT SPECIFIED;
BAV99
Lite-on Technology
RECTIFIER DIODE; Surface Mount: YES; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Operating Temperature: 175 Cel; Maximum Output Current: .1 A; Maximum Reverse Recovery Time: .006 us;
LM2931AZ-5.0RAG
Onsemi
LM2931AZ-5.0RAG by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V nominal output voltage, 0.1A max output current, and 0.6V max dropout voltage. Ideal for applications requiring stable voltage regulation in temperature-sensitive environments up to 150°C.
LM358DT
ROHM
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: LSOP; Package Shape: RECTANGULAR;
M39029/58-360
Glenair
CONNECTOR ACCESSORY; Contact Gender: MALE; Material: COPPER ALLOY; IEC Conformity: NO; MIL-Connector Accessory Name: CONTACT; MIL Conformity: YES;
MBR0520LT1G
MBR0520LT1G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, has a peak reflow temperature of 260°C, and a repetitive peak reverse voltage of 20V. This diode is ideal for applications requiring high-speed switching in compact electronic devices.
2N7002
Motorola
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Package Body Material: PLASTIC/EPOXY; Qualification: Not Qualified; Minimum Operating Temperature: -55 Cel;
CRG0805F10K
TE Connectivity
TE Connectivity's CRG0805F10K is a 10000 ohm fixed resistor with 1% tolerance. It operates b/w -55 to 155 °C and has a power dissipation of 0.125 W. Ideal for surface mount applications in various electronic circuits due to its compact size and high temperature rating.
SMBJ18CA
Semtech
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
North American Philips Discrete Products Div
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Tt Electronics Plc
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .8 A; JESD-30 Code: O-MBCY-W3;
1N4148
Unitrode
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM317T
Linear Technology
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Operating Temperature (TJ-Min): 0 Cel; No. of Functions: 1; JESD-609 Code: e0;
RC0603JR-070RL
Yageo
Yageo's RC0603JR-070RL is a SMT fixed resistor with 0 ohm resistance, rated for temperatures from -55 to 155 °C. Its metal glaze/thick film technology and 0.1 W power dissipation make it ideal for jumper applications in various electronic devices.
Zetex Plc
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Peak Reflow Temperature (C): 260; Package Shape: RECTANGULAR;
2N1595
Diodes Incorporated
SCR; Package Style (Meter): CYLINDRICAL; Surface Mount: NO; Terminal Position: BOTTOM; Configuration: SINGLE; Package Shape: ROUND;
F1857HD1200
Crydom
The Crydom F1857HD1200 is a single SCR with built-in diode, featuring a max on-state current of 55A and repetitive peak reverse voltage of 1200V. Ideal for applications requiring high power control such as industrial machinery and motor drives.
JANTX2N2323AS
M/a-com Technology Solutions
SCR; Package Style (Meter): CYLINDRICAL; Surface Mount: NO; Terminal Position: BOTTOM; Configuration: SINGLE; Maximum RMS On-state Current: 2.512 A;
P0102DN5AA4
STMicroelectronics
P0102DN5AA4 by STMicroelectronics is a SCR with 0.2mA DC Gate Trigger Current, 8A Non Repetitive Peak On-state Current, and 400V Repetitive Peak Reverse Voltage. It is used in applications requiring high current switching such as power supplies and motor control due to its small outline package and ANODE case connection.
2N690
Semitronics
SCR; Package Style (Meter): POST/STUD MOUNT; Surface Mount: NO; Terminal Position: UPPER; Configuration: SINGLE; Case Connection: ANODE;
TN2540-800G-TR
STMicroelectronics TN2540-800G-TR is a SCR with 16A max on-state current, 40mA DC gate trigger current, and 314A non-repetitive peak on-state current. Ideal for applications requiring high power control in industrial electronics due to its 800V repetitive peak reverse voltage and UL recognized reference standard.
MCC200-18IO1
Littelfuse
MCC200-18IO1 by Littelfuse is a SERIES CONNECTED SCR with 150mA DC Gate Trigger Current and 8640A Non Repetitive Peak On-state Current. It has a max On-state Current of 216A, making it ideal for high-power applications such as industrial motor drives and power supplies.
2N2323
Microsemi
SCR; Package Style (Meter): CYLINDRICAL; Surface Mount: NO; Terminal Position: BOTTOM; Configuration: SINGLE; Maximum Leakage Current: .1 mA;
2N687
Texas Instruments
2N687 by Texas Instruments is a Silicon Controlled Rectifier with 30mA DC Gate Trigger Current, 150A Non Repetitive Peak On-state Current, and 16A Max On-state Current. It operates b/w -60°C to 125°C and has a max DC Gate Trigger Voltage of 3V. Ideal for applications requiring high current switching capabilities.
M50-100-1-2-F-V
Sensata Technologies
The Sensata Technologies M50-100-1-2-F-V is a Silicon Controlled Rectifier with 150 mA DC Gate Trigger Current and 1500 A Non Repetitive Peak On-state Current. It features a common cathode configuration, suitable for applications requiring up to 100 A Max On-state Current. The device operates in temperatures ranging from -40°C to 125°C, making it ideal for various industrial and power control systems.
MCC56-12IO1B
IXYS Corporation
2N2454
2N2454 by Texas Instruments is a Silicon Controlled Rectifier with max DC Gate Trigger Current of 20mA, Non Repetitive Peak On-state Current of 75A, and Max On-state Current of 3A. It operates b/w -55°C to 105°C and has a Repetitive Peak Off-state Voltage of 400V. Ideal for power control applications requiring precise current regulation.
Central Semiconductor
F18107SD400
Cynergy3 Components
JANTX2N2323A
SCR; Package Style (Meter): CYLINDRICAL; Surface Mount: NO; Terminal Position: BOTTOM; Configuration: SINGLE; Qualification: Not Qualified;
MCO50-16IO1
The Littelfuse MCO50-16IO1 is a single SCR with 1600V repetitive peak reverse voltage and 85A max RMS on-state current. It has a plastic/epoxy package body, flange mount style, and operates b/w -40 to 150°C. Ideal for high-power applications requiring reliable switching capabilities.
TZ860N16KOFHPSA2
Infineon Technologies
TZ860N16KOFHPSA2 by Infineon Technologies is a single SCR with 1600V repetitive peak reverse voltage and 1500A max RMS on-state current. It is used in applications requiring high power control, such as industrial motor drives and power supplies. Operating temperatures range from -40°C to 125°C for versatile use.
2N1599
Hi-tron Semiconductor
SCR; Package Style (Meter): CYLINDRICAL; Surface Mount: NO; Terminal Position: BOTTOM; Terminal Form: WIRE; Minimum Operating Temperature: -60 Cel;
SZNYC0102BLT1G
SCR; Peak Reflow Temperature (C): NOT SPECIFIED; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED;
2N5062
Digitron Semiconductors
SCR; Package Style (Meter): CYLINDRICAL; Surface Mount: NO; Terminal Position: BOTTOM; Configuration: SINGLE; No. of Elements: 1;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
TT310N26KOF-A
SCR; Configuration: COMMON ANODE, 2 ELEMENTS; Maximum Operating Temperature: 125 Cel; Maximum DC Gate Trigger Current: 250 mA; Maximum Holding Current: 300 mA; No. of Elements: 2;
TT310N24KOC
SCR; Non Repetitive Peak On-state Current: 9000 A; Repetitive Peak Reverse Voltage: 2400 V; Screw Terminals Description: A-K-AK; Quick Connects Description: 2G-2GR; Maximum Operating Temperature: 125 Cel;
TT310N20KOFHPSA1
TT310N26KOC-A
SCR; Configuration: COMMON ANODE, 2 ELEMENTS; Screw Terminals Description: 2K-CA; Repetitive Peak Reverse Voltage: 2600 V; Maximum On-state Current: 310 A; Non Repetitive Peak On-state Current: 9000 A;
TT310N24KOF
SCR; Maximum DC Gate Trigger Voltage: 1.5 V; Maximum DC Gate Trigger Current: 250 mA; Quick Connects Description: 2G-2GR; Maximum On-state Current: 310 A; Repetitive Peak Reverse Voltage: 2400 V;
TT310N22KOF-A
SCR; Configuration: COMMON ANODE, 2 ELEMENTS; Quick Connects Description: 2G-2GR; Non Repetitive Peak On-state Current: 9000 A; Maximum Operating Temperature: 125 Cel; Maximum Holding Current: 300 mA;
TT310N26KOFHOSA1
SCR; Package Style (Meter): FLANGE MOUNT; Surface Mount: NO; Terminal Position: UNSPECIFIED; Configuration: SERIES CONNECTED, CENTER TAP, 2 ELEMENTS; Case Connection: ISOLATED;
TT310N20KOC-A
SCR; Configuration: COMMON ANODE, 2 ELEMENTS; Repetitive Peak Reverse Voltage: 2000 V; Screw Terminals Description: 2K-CA; No. of Elements: 2; Non Repetitive Peak On-state Current: 9000 A;
TT310N24KOC-A
SCR; Configuration: COMMON ANODE, 2 ELEMENTS; No. of Elements: 2; Maximum On-state Current: 310 A; Maximum Operating Temperature: 125 Cel; Quick Connects Description: 2G-2GR;
TT310N22KOC
SCR; Maximum Operating Temperature: 125 Cel; Maximum On-state Current: 310 A; Screw Terminals Description: A-K-AK; Non Repetitive Peak On-state Current: 9000 A; Quick Connects Description: 2G-2GR;
TT310N26KOC
SCR; Repetitive Peak Reverse Voltage: 2600 V; Quick Connects Description: 2G-2GR; Maximum On-state Current: 310 A; Maximum Operating Temperature: 125 Cel; Non Repetitive Peak On-state Current: 9000 A;
TT310N24KOF-A
SCR; Configuration: COMMON ANODE, 2 ELEMENTS; Screw Terminals Description: 2K-CA; Minimum Operating Temperature: -40 Cel; Quick Connects Description: 2G-2GR; Maximum DC Gate Trigger Current: 250 mA;
TT310N22KOF
SCR; Minimum Operating Temperature: -40 Cel; Maximum DC Gate Trigger Voltage: 1.5 V; Maximum DC Gate Trigger Current: 250 mA; Non Repetitive Peak On-state Current: 9000 A; Maximum Operating Temperature: 125 Cel;
TT310N26KOF
TT310N20KOF-A
SCR; Configuration: COMMON ANODE, 2 ELEMENTS; Minimum Operating Temperature: -40 Cel; Maximum On-state Voltage: 2.22 V; Maximum On-state Current: 310 A; Maximum Operating Temperature: 125 Cel;
TT310N22KOFHPSA1
TT310N20KOC
SCR; Non Repetitive Peak On-state Current: 9000 A; Screw Terminals Description: A-K-AK; Repetitive Peak Reverse Voltage: 2000 V; Maximum Operating Temperature: 125 Cel; Maximum On-state Current: 310 A;
TT310N20KOF
SCR; Maximum On-state Current: 310 A; Maximum DC Gate Trigger Voltage: 1.5 V; Maximum Holding Current: 300 mA; Screw Terminals Description: A-K-AK; Maximum DC Gate Trigger Current: 250 mA;
TT310N22KOC-A
SCR; Configuration: COMMON ANODE, 2 ELEMENTS; No. of Elements: 2; Screw Terminals Description: 2K-CA; Maximum Operating Temperature: 125 Cel; Repetitive Peak Reverse Voltage: 2200 V;
Eupec & Kg
SCR; Package Style (Meter): FLANGE MOUNT; Surface Mount: NO; Terminal Position: UNSPECIFIED; Configuration: COMMON ANODE, 2 ELEMENTS; Case Connection: ISOLATED;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved