Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; JESD-609 Code: e0; Package Style (Meter): Radial; Maximum Energy Absorbing Capacity: 91 J; Technology: METAL OXIDE FILM;
Median Price
$0.375
Lifecycle Status
Suppliers In-Stock
8
In-Stock Inventory
1k+
ECAB
1+ parts
-
100+ parts
1k+ parts
10k+ parts
Digiode
Bristol Electronics
$0.225
First Choice Components Inc.
Vyrian
Inland Empire Components Inc.
ACDS - Activité Composants Distribution Service
Goldney Electronics S.L.
Modulus Dynamics
$0.126
$0.121
$0.116
RoMaks
Assy Fe
Perfect Parts
Corphita
Non-linear Resistors S20K175 attributes and parameters. Explore more Non-linear Resistors devices from Infineon Technologies
Maximum Circuit DC Voltage:
Maximum Circuit RMS Voltage:
Maximum Energy Absorbing Capacity:
JESD-609 Code:
Mounting Type:
Package Style (Meter):
Resistor Type:
Sub-Category:
Technology:
Terminal Finish:
Operating Voltage:
S20K175 Resistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8533.40.40.00
SB
8533.40.00.80
NSN
5920-01-451-5097, 5920014515097
NIIN
014515097
Infineon Technologies AG is a leading global semiconductor manufacturer and provider of comprehensive solutions for automotive, industrial, and consumer applications. Founded in 1999, the company has grown to become one of the largest semiconductor manufacturers in Europe. Infineon is headquartered in Neubiberg, Germany with operations across countries in Europe and Asia Pacific. Infineon provides microelectronics products that address many of today's societal challenges affecting energy efficiency, mobility, security and connectivity. Over the past two decades Infineon has become a major player in the semiconductor industry with an impressive portfolio of innovative technologies. As one of only four companies that produce DRAM chips for automobiles, Infineon produces cutting-edge processors for use in advanced driver assistance systems (ADAS). Likewise, they specialize in providing advanced embedded secure microcontrollers that are essential for connected devices. Furthermore, they offer integrated circuit solutions for industrial power control such as motor controllers and embedded gate drivers.
CEO
Jochen Hanebeck
Chief Financial Officer
Sven Schneider
Chief Marketing Officer
Andreas Urschitz
Villach 300mm
Fabrication
Fab Initiation
2011
Austria
Villach
Wafer Capacity
11,000
Kulim 2
2016
Malaysia
Kulim
79,500
Dresden - Module 3
1999
Germany
Dresden
58,000
Villach Building
2,000
Regensburg
1986
60,000
Dresden 200 - Module 1
1995
28,000
Dresden 200 - Module 2
1996
Building 38
2005
500
Building 47
Kulim 1
2006
110,000
Mesa Facility
1990
USA
Mesa
3,000
Villach 150mm
1981
35,000
Villach 200mm
68,000
Temecula
30,000
2021
2018
5,000
Kulim 3
2024
Fab 25
Austin
31,000
Dresden - Module 4
2026
LM317TG
Texas Instruments
LM317TG by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and max output current of 1.5A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. The package style is flange mount, with a rectangular shape and through-hole terminals for easy installation.
SS14
Pro-an Electronic
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Vishay Intertechnology
2N7002 by Vishay Intertechnology is a N-CHANNEL FET with 60V DS Breakdown Voltage, 0.115A Drain Current, and 7.5 ohm On Resistance. Ideal for SWITCHING applications due to its SINGLE configuration with BUILT-IN DIODE. Operates in ENHANCEMENT MODE, suitable for surface mount with GULL WING terminals.
LL4148
SPC TECHNOLOGY/ MULTICOMP
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
LM107H
General Electric Solid State
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Minimum Voltage Gain: 25000;
Inter F E T
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain-Source On Resistance: 7.5 ohm; Maximum Drain Current (Abs) (ID): .115 A;
NE555D
NXP Semiconductors
SQUARE; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: LSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
FT232RL-TUBE
FTDI
FTDI's FT232RL-TUBE is a bus controller with 28 terminals, operating at 3.3-5.25V. It supports USB, VBUS, and UART interfaces with a data transfer rate of 60MBps. Ideal for industrial applications requiring RS232/RS422/RS485 compatibility in compact designs due to its small outline package style.
STM32H753IIT6
STMicroelectronics
STM32H753IIT6 by STMicroelectronics is a 32-bit microcontroller with 176 terminals, operating at up to 48 MHz. It features 20-Ch 16-Bit ADCs and 2-Ch 12-Bit DACs, suitable for industrial applications requiring high-speed data processing and connectivity via CAN, ETHERNET, USB, and more.
L7805CV
L7805CV by STMicroelectronics is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1.5A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring stable voltage regulation in electronic circuits.
STM32H743BIT6
STM32H743BIT6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, 208 terminals, and 1085440 bytes of RAM. It features 2 DAC channels, 32 ADC channels, and operates at a max clock frequency of 48 MHz. Ideal for industrial applications requiring high-speed processing and extensive peripheral connectivity.
NDT2955
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 3 W; Package Style (Meter): SMALL OUTLINE; Maximum Drain Current (Abs) (ID): 2.5 A;
Panjit International
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Time At Peak Reflow Temperature (s): 40; Minimum DS Breakdown Voltage: 60 V;
Temic Semiconductors
RECTIFIER DIODE; Terminal Position: END; Terminal Form: NO LEAD; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
SMBJ18CA
Alpha & Omega Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Iskra Semic Capacitors Industry
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Operating Temperature: 200 Cel; JESD-609 Code: e0; Maximum Non Repetitive Peak Forward Current: 2 A;
BAV99
Promax-johnton
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Hy Electronic
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
2N2222A
Vpt Components
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 1 W; Maximum Collector Current (IC): .8 A; Maximum Power Dissipation Ambient: .5 W;
Dc Components
MICROSMD075F-2
TE Connectivity
TE Connectivity's MICROSMD075F-2 is a PTC resettable fuse with a rated AC voltage of 6V. Featuring dual-ended terminals and a rectangular package, it is ideal for temperature sensing applications. With a max operating temperature of 85°C, this surface-mount thermistor offers reliable protection in various electronic devices.
NTCALUG02A103FLA
Vishay Intertechnology's NTCALUG02A103FLA is a non-linear resistor with a resistance of 10000 ohm and a thermal sensitivity index of 3435 K. It is used for temperature sensing applications, with a max operating temperature of 125 °C and a min operating temperature of -55 °C.
B72220S3301K101
Epcos Ag
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; Rated Power Dissipation (P): 1 W; Maximum Operating Temperature: 85 Cel; Maximum Circuit RMS Voltage: 300 V; No. of Terminals: 2;
NANOSMDC075F-2
TE Connectivity's NANOSMDC075F-2 is a PTC resettable fuse with 6V URac, 0.8W power dissipation, and 85°C max operating temp. It features dual-ended terminals in a rectangular package for temperature sensing applications. Suitable for surface mounting method.
NCP18XH103F03RB
Murata Manufacturing
Murata Manufacturing's NCP18XH103F03RB is a 10000 ohm NTC thermistor with dual-ended terminals, SMT package style, and 1% tolerance. It is used for temperature sensing applications with an operating voltage of 5V and a thermal sensitivity index of 3380K. The thermistor has a max operating temperature of 125°C and min of -40°C, making it suitable for various temperature monitoring systems.
NTCALUG02A103G
Vishay Intertechnology's NTCALUG02A103G is a 10000 ohm NTC thermistor with 2 terminals, radial placement, and disk package shape. It has a thermal sensitivity index of 3984 K and operates b/w -55 to 125 °C. Ideal for temperature sensing applications, it features tin terminal finish and chassis mount packaging.
V82ZA20PX10
Littelfuse
Littelfuse V82ZA20PX10 varistor has a rated temp of 85°C, max operating temp of 125°C, and min operating temp of -55°C. It is a metal oxide film technology varistor with radial terminal placement for surge protection applications.
ERTJ0EP473F
Panasonic
Panasonic ERTJ0EP473F is a NTC thermistor with 47000 ohm resistance, 1% tolerance, and 0.066 W power dissipation. It is used for temperature compensation in applications requiring thermal sensitivity index of 4100 K. With dual-ended terminals and SMT package style, it operates b/w -40 to 125 °C for precise measurements.
NTCS0603E3103GMT
Vishay Intertechnology's NTCS0603E3103GMT is a NTC thermistor with 10000 ohm resistance, 2% tolerance, and 150°C max operating temp. Ideal for temperature sensing applications due to its thermal sensitivity index of 3610 K and surface mount package style.
ERTJ0EG103FA
Panasonic ERTJ0EG103FA is a NTC thermistor with 10000 ohm resistance, 1% tolerance, and 125°C max operating temp. Ideal for temperature compensation in SMT applications due to its dual-ended terminals and compact rectangular package design.
V5.5MLA0603NHX2888
V5.5MLA0603NHX2888 by Littelfuse is a VARISTOR with 5.5V operating voltage and 0.1J energy absorption capacity. It has dual-ended terminals, matte tin finish, and operates b/w -55°C to 150°C. Ideal for surface mount applications requiring protection against voltage surges in electronic circuits.
RUEF300
PTC RESETTABLE FUSE; Mounting Type: THROUGH HOLE MOUNT; Resistance: .08 ohm; Rated Power Dissipation (P): 2 W; Maximum Operating Temperature: 85 Cel; Additional Features: RESISTANCE RANGE(MIN-MAX): 0.020-0.050;
B57541G1103F005
TDK
B57541G1103F005 by TDK is a NTC thermistor with 10000 ohm resistance, 1% tolerance, and rated power dissipation of 0.018 W. It is used for temperature sensing applications with a thermal sensitivity index of 3625 K, operating b/w -55 to 250 °C. The thermistor has radial terminal placement in disk package shape for chassis mounting.
MINISMDC010F-2
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .7 ohm; Maximum Operating Temperature: 85 Cel; JESD-609 Code: e3; Height (Package): .89 mm;
MOV-14D560K
Bourns
The Bourns MOV-14D560K is a VARISTOR with 35V max circuit RMS voltage and 11J energy absorption. Ideal for surge protection in applications requiring high reliability, it operates b/w -40°C to 105°C. With radial terminal placement and metal oxide technology, it offers through-hole mounting in bulk packaging.
V275LA20APX2855
V275LA20APX2855 by Littelfuse is a VARISTOR with 275V URac and 369V operating voltage. It has a max energy absorption of 75J, suitable for TEMPERATURE COMPENSATION applications. With radial terminal placement and metal oxide film technology, it operates b/w -55°C to 125°C effectively.
NTCS0603E3104JXT
Vishay Bc Components
NTC THERMISTOR; Mounting Type: SURFACE MOUNT; Resistance: 100000 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 150 Cel; Tolerance: 5 %;
RF2577-000
PTC RESETTABLE FUSE; Mounting Type: THROUGH HOLE MOUNT; Resistance: 20 ohm; Rated Power Dissipation (P): .22 W; Maximum Operating Temperature: 85 Cel; Additional Features: RESISTANCE RANGE(MIN-MAX): 7.3-11.1;
NTCG164BH103HT1
NTCG164BH103HT1 by TDK is a NTC thermistor with 10000 ohm resistance, 3% tolerance, and 125°C max operating temp. Ideal for temperature sensing applications due to its high thermal sensitivity index of 4100 K. Features SMT package style and surface mounting type.
B59955C0120A070
The TDK B59955C0120A070 is a PTC thermistor with resistance of 0.8 ohm, rated for 30V AC/DC. It is used for overcurrent protection in radial disk package, operating b/w -40°C to 125°C. Ideal for through-hole mounting applications requiring high temperature tolerance and strip pack packaging.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
S20K275
Infineon Technologies
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; Rated Power Dissipation (P): 1 W; JESD-609 Code: e0; Shape (Package): DISK PACKAGE; Terminal Placement: RADIAL;
Herrmann Kg
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; Package Style (Meter): Radial; Maximum Circuit RMS Voltage: 275 V; Terminal Finish: Tin/Lead (Sn/Pb); Operating Voltage: 350 V;
S20K95
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; Maximum Circuit DC Voltage: 125 V; Maximum Circuit RMS Voltage: 95 V; Operating Voltage: 125 V; Terminal Finish: Tin/Lead (Sn/Pb);
S20K35
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; Maximum Circuit RMS Voltage: 35 V; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Circuit DC Voltage: 45 V; Operating Voltage: 45 V;
S20K300
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; Package Style (Meter): Radial; Terminal Finish: Tin/Lead (Sn/Pb); Operating Voltage: 385 V; Maximum Circuit DC Voltage: 385 V;
S20K11
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; Package Style (Meter): Radial; Operating Voltage: 14 V; Maximum Circuit DC Voltage: 14 V; Maximum Circuit RMS Voltage: 11 V;
S20K385
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; Maximum Energy Absorbing Capacity: 160 J; Package Style (Meter): Radial; Operating Voltage: 505 V; JESD-609 Code: e0;
S20K14
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; JESD-609 Code: e0; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Circuit DC Voltage: 18 V; Package Style (Meter): Radial;
S20K230
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; Package Style (Meter): Radial; Maximum Circuit DC Voltage: 300 V; Terminal Finish: Tin/Lead (Sn/Pb); Technology: METAL OXIDE FILM;
S20K25
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; Maximum Energy Absorbing Capacity: 26 J; Maximum Circuit RMS Voltage: 25 V; JESD-609 Code: e0; Operating Voltage: 31 V;
S20K30
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; JESD-609 Code: e0; Package Style (Meter): Radial; Maximum Circuit RMS Voltage: 30 V; Maximum Circuit DC Voltage: 38 V;
S20K17
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; Maximum Energy Absorbing Capacity: 14 J; Maximum Circuit DC Voltage: 22 V; JESD-609 Code: e0; Operating Voltage: 22 V;
S20K320
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; Maximum Circuit RMS Voltage: 320 V; Terminal Finish: Tin/Lead (Sn/Pb); JESD-609 Code: e0; Package Style (Meter): Radial;
S20K130
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; Maximum Energy Absorbing Capacity: 72 J; Package Style (Meter): Radial; Operating Voltage: 170 V; Maximum Circuit DC Voltage: 170 V;
S20K140
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; Maximum Energy Absorbing Capacity: 72 J; Operating Voltage: 180 V; Terminal Finish: Tin/Lead (Sn/Pb); JESD-609 Code: e0;
S20K250
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; JESD-609 Code: e0; Package Style (Meter): Radial; Maximum Circuit DC Voltage: 320 V; Maximum Energy Absorbing Capacity: 130 J;
S20K20
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; Package Style (Meter): Radial; JESD-609 Code: e0; Maximum Circuit DC Voltage: 26 V; Operating Voltage: 26 V;
S20K1000
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; Terminal Finish: Tin/Lead (Sn/Pb); JESD-609 Code: e0; Package Style (Meter): Radial; Maximum Energy Absorbing Capacity: 410 J;
S20K115
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; Terminal Finish: Tin/Lead (Sn/Pb); Package Style (Meter): Radial; Maximum Energy Absorbing Capacity: 60 J; JESD-609 Code: e0;
Siemens
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; Package Style (Meter): Radial; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Circuit DC Voltage: 150 V; Maximum Circuit RMS Voltage: 115 V;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved