Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SINGLE COLOR LED; Lens Type: CLEAR; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Forward Voltage: 2.6 V; Minimum Operating Temperature: -55 Cel; Viewing Angle: 120 deg;
Median Price
-
Lifecycle Status
Suppliers In-Stock
4
In-Stock Inventory
1k+
Connector Distribution Corp
1+ parts
100+ parts
1k+ parts
10k+ parts
Right Parts Inc.
Vyrian
Digiode
Modulus Dynamics
$0.553
$0.531
$0.509
Corphita
Visible LEDs LGM670-J attributes and parameters. Explore more Visible LEDs devices from Infineon Technologies
Color:
Color At Wavelength:
Configuration:
Maximum Forward Current:
Maximum Forward Voltage:
JESD-609 Code:
Lens Type:
No. of Functions:
Maximum Operating Temperature:
Minimum Operating Temperature:
Optoelectronic Type:
Height:
Peak Wavelength (nm):
Maximum Reverse Voltage:
Shape:
Size:
Sub-Category:
Terminal Finish:
Viewing Angle:
LGM670-J Optoelectronics trade compliance attributes, and parameters.
HTS
8541.40.20.00
SB
Infineon Technologies AG is a leading global semiconductor manufacturer and provider of comprehensive solutions for automotive, industrial, and consumer applications. Founded in 1999, the company has grown to become one of the largest semiconductor manufacturers in Europe. Infineon is headquartered in Neubiberg, Germany with operations across countries in Europe and Asia Pacific. Infineon provides microelectronics products that address many of today's societal challenges affecting energy efficiency, mobility, security and connectivity. Over the past two decades Infineon has become a major player in the semiconductor industry with an impressive portfolio of innovative technologies. As one of only four companies that produce DRAM chips for automobiles, Infineon produces cutting-edge processors for use in advanced driver assistance systems (ADAS). Likewise, they specialize in providing advanced embedded secure microcontrollers that are essential for connected devices. Furthermore, they offer integrated circuit solutions for industrial power control such as motor controllers and embedded gate drivers.
CEO
Jochen Hanebeck
Chief Financial Officer
Sven Schneider
Chief Marketing Officer
Andreas Urschitz
Villach 300mm
Fabrication
Fab Initiation
2011
Austria
Villach
Wafer Capacity
11,000
Kulim 2
2016
Malaysia
Kulim
79,500
Dresden - Module 3
1999
Germany
Dresden
58,000
Villach Building
2,000
Regensburg
1986
60,000
Dresden 200 - Module 1
1995
28,000
Dresden 200 - Module 2
1996
Building 38
2005
500
Building 47
Kulim 1
2006
110,000
Mesa Facility
1990
USA
Mesa
3,000
Villach 150mm
1981
35,000
Villach 200mm
68,000
Temecula
30,000
2021
2018
5,000
Kulim 3
2024
Fab 25
Austin
31,000
Dresden - Module 4
2026
DP83848IVVX/NOPB
Texas Instruments
Texas Instruments DP83848IVVX/NOPB is a 3.3V Ethernet transceiver with 100000 Mbps data rate, suitable for industrial applications. It features CMOS technology, operates b/w -40 to 85 °C, and comes in a low profile flatpack package with matte tin finish.
SMBJ18CA
Good-ark Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V; Maximum Time At Peak Reflow Temperature (s): 10; JESD-609 Code: e3;
1N4148WT
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
New Jersey Semiconductor Products
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
BAV99
Zetex Plc
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002DWH6327XTSA1
Infineon Technologies
2N7002DWH6327XTSA1 by Infineon: N-CHANNEL FET with 60V DS Breakdown Voltage, 0.3A ID, and 3ohm RDS. Ideal for SWITCHING applications in small outline packages with GULL WING terminals.
BAV99+
Multicomp Pro
BAV99+ by Multicomp Pro is a series connected diode with 0.2A output current and 75V peak reverse voltage. Its 0.006us reverse recovery time makes it ideal for high-speed applications. This small outline rectifier diode is designed for surface mount installation in electronic circuits.
CRCW06030000Z0EAHP
Vishay Intertechnology
Vishay Intertechnology's CRCW06030000Z0EAHP is a 0 ohm jumper resistor with METAL GLAZE/THICK FILM tech. Operating temp range -55 to 155 °C, it's SMT package style makes it ideal for automotive applications meeting AEC-Q200 standard.
M39029/56-351
Itt Cannon
CONNECTOR ACCESSORY; MIL Conformity: YES; Terminal Type: WIRE; IEC Conformity: NO; Alternate Contact Sources: ITT CANNON; Associated Military - Specifications: MIL-C-38999;
LM358N
LM358N by Texas Instruments is an operational amplifier with 2 functions, offering a max input offset voltage of 9000 uV and a nominal common mode reject ratio of 85 dB. Widely used in commercial applications, it operates at temperatures ranging from 0 to 70 °C and has a unity gain bandwidth of 1000 kHz.
2N7002
Formosa Microsemi
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Maximum Drain Current (Abs) (ID): .115 A;
LL4148
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Micro Commercial Components
BSS138-TP
BSS138-TP by Micro Commercial Components is a N-channel small signal FET with a min DS breakdown voltage of 50V and max drain current of 0.22A. It is commonly used in applications requiring enhancement mode operation, such as power management and switching circuits.
EU2B-YS2J03F
Idec
ROTARY SWITCH;
Weitronic Enterprise
Sensitron Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Temic Semiconductors
1N4148WS
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Shanghai Lunsure Electronic Technology
CMD15-21VGC/TR8
Visual Communications Company
CMD15-21VGC/TR8 by Visual Communications Company is a 2mm single color LED with peak wavelength of 570nm. It has a max forward current of 0.025A and viewing angle of 140°. Ideal for surface mount applications, this green LED operates b/w -40 to 85 °C, offering clear lens and rectangular shape.
KP-2012QBC-D
Kingbright Electronic
KP-2012QBC-D by Kingbright Electronic is a 1.3mm SINGLE COLOR LED with peak wavelength of 468nm and water clear lens. It has a max forward current of 0.03A, viewing angle of 120°, and blue color at wavelength. Ideal for surface mount applications requiring compact visible LEDs with high luminous intensity.
HLMP-3401
Agilent Technologies
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 8.0; Lens Type: TINTED DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb);
597-5112-407F
Dialight
Dialight's 597-5112-407F is a single color LED with peak wavelength of 660nm. It has a max forward current of 0.025A and forward voltage of 2.3V. Ideal for surface mount applications, offering diffused white lens and nominal luminous intensity of 11.7mcd in red color.
LTST-C191KSKT-5A
Lite-on Technology
LTST-C191KSKT-5A by Lite-on Technology is a 1.1mm SINGLE COLOR LED with a peak wavelength of 588nm and max forward current of 0.03A. Ideal for applications requiring ultra bright yellow light, such as indicator lights in electronic devices due to its water clear lens and surface mounting feature.
LTST-C190KFKT-5A
SINGLE COLOR LED;
LXZ1-4070
Lumileds Holding B V
Lumileds Holding B V's LXZ1-4070 is a single color LED with max forward current of 1A, operating temp range -40 to 135°C. Ideal for surface mount applications, emits warm white light with 120° viewing angle.
12-23C/R6GHBHC-A01/2C
Everlight Electronics
Everlight Electronics' 12-23C/R6GHBHC-A01/2C is a 2mm COMMON ANODE TRIPLE COLOR LED with peak wavelengths of 632nm, 518nm, and 468nm. It has a max forward current of 0.025A and water-clear lens type. Ideal for applications requiring brilliant red, green, and blue colors with surface mounting feature.
APHHS1005SURCK
Kingbright Electronic's APHHS1005SURCK is a 0.8mm SINGLE COLOR LED with peak wavelength of 650nm. It has a max forward current of 0.03A and viewing angle of 120°. Ideal for surface mount applications, this HYPER RED LED operates b/w -40 to 85 °C, with a luminous intensity of 140.0mcd.
Q62702P5179
Osram Opto Semiconductors
Osram Opto Semiconductors' Q62702P5179 is a 1.3mm SINGLE COLOR LED with peak wavelength of 572nm and max forward current of 0.025A. Ideal for applications requiring green light emission, such as indicator lights in electronic devices due to its colorless diffused lens and surface mounting feature.
MSL0104RGBU1
ROHM
ROHM's MSL0104RGBU1 is a 5.4mm TRIPLE COLOR LED with separate configuration and built-in ZENER DIODE. It has a max forward current of 0.04A, MILKY WHITE lens, and operates b/w -40 to 85°C. Ideal for applications requiring RGB color mixing in compact designs like signage, displays, and decorative lighting.
SML-522MU8WT86
ROHM's SML-522MU8WT86 is a 1.3mm dual-color LED with separate elements, featuring max forward current of 0.02A and nominal luminous intensity of 63.0/40.0 mcd. Ideal for surface mount applications in visible LED category, it emits red/yellow-green light with milky white lens, suitable for temperatures ranging from -40 to 85°C.
150060BS75000
Wuerth Elektronik & Kg
150060BS75000 by Wurth Elektronik is a SINGLE COLOR LED with a peak wavelength of 465nm and max forward current of 0.03A. With a viewing angle of 140°, it's ideal for applications requiring blue light in compact spaces like surface mount PCB designs.
HSMF-C164
Broadcom
HSMF-C164 by Broadcom is a 1.6mm dual-color LED with peak wavelengths of 637nm and 468nm, ideal for applications requiring separate elements. With a max forward current of 0.02A and viewing angle of 120°, it's suitable for surface mount configurations in electronics for status indicators or displays.
L-7104EC
The Kingbright Electronic L-7104EC is a 3mm SINGLE COLOR LED with a peak wavelength of 627nm and max forward current of 0.03A. Ideal for applications requiring HIGH EFFICIENCY RED light emission, such as indicator lights in electronic devices. With WATER CLEAR lens type, it offers a viewing angle of 34° and nominal luminous intensity of 60.0mcd.
HSMF-A341-A00J1
TRIPLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 4; Nominal Luminous Intensity (mcd): 80.0/160.0/40.0; Lens Type: DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb);
LHR974
LHR974 LED by Infineon has a peak wavelength of 660nm, forward current of 0.03A, and viewing angle of 160°. Ideal for applications requiring red light emission, such as indicator lights in automotive or consumer electronics due to its water diffused lens design.
HLMP-1301-G0000
Hewlett Packard
SINGLE COLOR LED; Maximum Forward Current: .03 A; Size: 3 mm; Minimum Operating Temperature: -55 Cel; Configuration: SINGLE; Shape: ROUND;
HSMG-C191
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 15.0; Lens Type: UNTINTED DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb);
597-6501-607F
Dialight's 597-6501-607F LED has a peak wavelength of 574nm, max forward current of 0.03A, and water-clear lens. Ideal for applications requiring single-color green-yellow light with a viewing angle of 70°. Operating temp range -55 to 85°C makes it suitable for various lighting projects.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
LGM67K-G1J2-24-Z
Osram Opto Semiconductors' LGM67K-G1J2-24-Z is a 1.5mm single-color LED with peak wavelength of 572nm, emitting green light. It has a max forward current of 0.02A and viewing angle of 120°, suitable for surface mount applications in various electronic devices.
LGM67K-G1J2-24-0-2-R18-Z
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 4.45; Lens Type: COLORLESS CLEAR; Terminal Finish: PURE TIN OVER NICKEL;
LGM67K-G1J2-24
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 28.0; Lens Type: COLORLESS CLEAR; Terminal Finish: TIN OVER NICKEL;
LGM67K-H1J2-24
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 30.0; Lens Type: COLORLESS CLEAR; Terminal Finish: TIN OVER NICKEL;
LGM676-N2Q1-24-Z
Osram Opto Semiconductors' LGM676-N2Q1-24-Z is a 1.5mm GREEN LED with peak wavelength of 572nm, max forward current of 0.03A, and luminous intensity of 62.75mcd. Ideal for surface mount applications with a viewing angle of 120° and operating temperature range from -40 to 100 °C.
LGM670-HK
SINGLE COLOR LED; Lens Type: CLEAR; Terminal Finish: Tin/Lead (Sn/Pb); No. of Functions: 1; Size: 1.5 mm; Viewing Angle: 120 deg;
LGM670-J2
Visible LEDs; Lens Type: CLEAR; Terminal Finish: Tin/Lead (Sn/Pb); Viewing Angle: 120 deg; Minimum Operating Temperature: -40 Cel; Peak Wavelength (nm): 565;
LGM670-J2K2-1
Visible LEDs; Lens Type: CLEAR; Terminal Finish: Tin/Lead (Sn/Pb); Color At Wavelength: Green; Height: 1.4 mm; JESD-609 Code: e0;
LGM670-JM
SINGLE COLOR LED; Lens Type: CLEAR; Terminal Finish: Tin/Lead (Sn/Pb); Color: GREEN; Maximum Reverse Voltage: 5 V; Size: 1.5 mm;
LGM670-K
SINGLE COLOR LED; Lens Type: CLEAR; Terminal Finish: Tin/Lead (Sn/Pb); Peak Wavelength (nm): 565; Configuration: SINGLE; Maximum Forward Voltage: 2.6 V;
LGM670-K1
Visible LEDs; Lens Type: CLEAR; Terminal Finish: Tin/Lead (Sn/Pb); Viewing Angle: 120 deg; Maximum Forward Voltage: 2.6 V; Maximum Operating Temperature: 100 Cel;
LGM670-K2
Visible LEDs; Lens Type: CLEAR; Terminal Finish: Tin/Lead (Sn/Pb); Viewing Angle: 120 deg; Maximum Forward Voltage: 2.6 V; Minimum Operating Temperature: -40 Cel;
LGM670-K2M1-1
Visible LEDs; Lens Type: CLEAR; Terminal Finish: Tin/Lead (Sn/Pb); JESD-609 Code: e0; Minimum Luminous Intensity: 120 cd; Color At Wavelength: Green;
LGM670-L1
Visible LEDs; Lens Type: CLEAR; Terminal Finish: Tin/Lead (Sn/Pb); Height: 1.4 mm; Peak Wavelength (nm): 565; Color At Wavelength: Green;
LGM670-L2
Visible LEDs; Lens Type: CLEAR; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Forward Current: .03 A; Maximum Forward Voltage: 2.6 V; Maximum Operating Temperature: 100 Cel;
LGM670-M1
Visible LEDs; Lens Type: CLEAR; Terminal Finish: Tin/Lead (Sn/Pb); Viewing Angle: 120 deg; Peak Wavelength (nm): 565; Minimum Operating Temperature: -40 Cel;
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 8.4; Lens Type: COLORLESS CLEAR; Terminal Finish: Tin/Nickel (Sn/Ni);
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved