Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Osram Opto Semiconductors' LGM67K-G1J2-24 is a 1.5mm SINGLE COLOR LED with peak wavelength of 572nm, emitting GREEN light. With max forward current of 0.02A and viewing angle of 120°, it's ideal for surface mount applications requiring green-yellow illumination at an operating temp range of -40 to 100°C.
Median Price
$0.084
Lifecycle Status
Suppliers In-Stock
11
In-Stock Inventory
1k+
Newark
1+ parts
$0.470
100+ parts
$0.120
1k+ parts
$0.086
10k+ parts
Mouser Electronics
$0.490
$0.123
$0.089
$0.067
Arrow
-
$0.049
Verical
Element14
Farnell
$0.076
$0.064
Avnet
RS (Exports)
$0.491
Nova Conductors
TME
$0.310
$0.111
$0.071
$0.056
Vyrian
Semicontronic
$0.017
$0.016
Aranea Global
$0.081
Continental Prestige Electronics
Argo Parts USA
$0.083
Glotronic Ltd.
Infinite Electronics LLP (Excess)
Corohmni
Authorized Procurement Solutions
Having a single configuration simplifies the installation process and reduces chances of errors.
Compact size allows for versatile placement and integration in various designs.
Efficiently utilizes power while providing sufficient brightness for visibility.
Specific peak wavelength ensures consistent color output for visual applications.
Clear lens helps in accurate color representation without distortion.
Designed for specific color output, ideal for applications requiring uniform lighting.
Simple 2-terminal design for easy installation and connection.
High operating temperature range ensures reliable performance in various environments.
Low profile design for discreet placement while providing adequate luminosity.
Rectangular shape offers directional lighting suitable for specific applications.
Wide temperature range allows for operation in extreme conditions without performance issues.
Durable terminal finish for reliable connectivity and longevity.
Color consistency at green-yellow wavelength ensures accurate representation for visual needs.
Specific green color output suitable for various signaling and illumination purposes.
TR packaging ensures protection during transportation and storage.
Higher reverse voltage tolerance for added protection against voltage fluctuations.
Standard terminal pitch for easy integration into existing setups.
Wide viewing angle for optimal visibility from different perspectives.
Sufficient luminous intensity for visible output in various lighting conditions.
Surface mount design for easy and secure installation on PCBs or other surfaces.
Low forward voltage for efficient power usage and reduced heat generation.
Visible LEDs LGM67K-G1J2-24 attributes and parameters. Explore more Visible LEDs devices from Osram Opto Semiconductors
Additional Features:
Color:
Color At Wavelength:
Configuration:
Maximum Forward Current:
Maximum Forward Voltage:
JESD-609 Code:
Lens Type:
Nominal Luminous Intensity (mcd):
Mounting Feature:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Optoelectronic Type:
Height:
Packing Method:
Peak Wavelength (nm):
Maximum Reverse Voltage:
Shape:
Size:
Sub-Category:
Terminal Finish:
Terminal Pitch:
Viewing Angle:
LGM67K-G1J2-24 Optoelectronics trade compliance attributes, and parameters.
HTS
8541.40.20.00
SB
ams OSRAM is a global leader in optical solutions. We offer a unique product and technology portfolio for sensing, illumination and visualization: from prime-quality light emitters and optical components to micro-modules, light sensors, ICs and related software. Designing pioneering optical solutions that inspire our customers is what we do best. We are known for our imagination and deep engineering expertise. As trusted partner serving the entire value chain of optical solutions, we enable our customers in the consumer, automotive, industrial and healthcare sectors maintain their competitive edge. We add intelligence to light and passion to innovation to enrich people’s lives.
LM358AN
Texas Instruments
LM358AN by Texas Instruments is an Operational Amplifier with 2 functions. It has a Max Input Offset Voltage of 5000 uV and Nominal Common Mode Reject Ratio of 85 dB. Widely used in voltage-feedback applications due to its high Min Voltage Gain of 15000 and Unity Gain Bandwidth of 1000 kHz.
INA826AIDGKR
INA826AIDGKR by Texas Instruments is an instrumentation amplifier with 150uV max input offset voltage, 0.095uA max average bias current, and 1MHz nominal bandwidth. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and high common mode rejection ratio of 120dB.
1N4148WS
Vishay Semiconductors
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
Dionics-usa
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
BSS138
Panjit International
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3 ohm; Minimum DS Breakdown Voltage: 50 V; Terminal Form: GULL WING;
2N7002
Motorola
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Package Body Material: PLASTIC/EPOXY; Qualification: Not Qualified; Minimum Operating Temperature: -55 Cel;
Siliconix
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain Current (ID): .115 A; Operating Mode: ENHANCEMENT MODE;
NE555D
NE555D by Texas Instruments is an 8-terminal IC with a supply voltage range of 4.5V to 16V, suitable for analog waveform generation applications. It operates at temperatures from 0°C to 70°C and has a max supply current of 15mA. The package style is small outline, making it ideal for compact electronic designs.
Vishay Intertechnology
2N7002 by Vishay Intertechnology is a N-CHANNEL FET with 60V DS Breakdown Voltage, 0.115A Drain Current, and 7.5 ohm On Resistance. Ideal for SWITCHING applications due to its SINGLE configuration with BUILT-IN DIODE. Operates in ENHANCEMENT MODE, suitable for surface mount with GULL WING terminals.
Philips Semiconductors
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Moisture Sensitivity Level (MSL): 1; Maximum Operating Temperature: 150 Cel;
LM555CN
LM555CN by Texas Instruments is an Analog Waveform Generation IC with a supply voltage range of 4.5V to 16V. It operates b/w 0°C to 70°C, making it suitable for commercial applications. This rectangular package IC has dual terminals and uses bipolar technology for pulse generation in various electronic circuits.
AT90CAN128-16AU
Microchip Technology
AT90CAN128-16AU by Microchip Technology is a microcontroller with 8-bit data RAM and 16-bit address bus width. It operates at a max clock frequency of 16 MHz, making it suitable for industrial applications requiring low power mode and connectivity options like CAN, SPI, and USART. With 53 I/O lines and 8-channel 10-bit ADCs, this microcontroller offers versatile peripheral support for various embedded systems.
SMBJ18CA
Db Lectro
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
CRCW080510R0FKEA
Vishay Intertechnology's CRCW080510R0FKEA is a fixed resistor with 10 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for surface mount applications in automotive electronics due to its AEC-Q200 reference standard and operating voltage of 150 V. Operating temperature range from -55 to 155 °C ensures reliability in various environments.
BAV99WT1G
Onsemi
BAV99WT1G by Onsemi is a series connected diode with 0.006 us reverse recovery time. It is a small outline rectifier diode with 70V peak reverse voltage, ideal for surface mount applications in electronics requiring fast switching and low forward voltage drop.
BAV99
Vishay Intertechnology's BAV99 diode features a max forward voltage of 1.3V and a max output current of 0.15A, making it ideal for rectification applications. With a small outline package style and dual terminal position, this series-connected diode is designed for surface mount usage in various electronic circuits with an operating temperature range from -55°C to 150°C.
Raytheon Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Minimum DC Current Gain (hFE): 100; Maximum Turn On Time (ton): 35 ns;
AH180-WG-7
Diodes Incorporated
AH180-WG-7 by Diodes Inc. is a magnetic field sensor with 1.5mT hysteresis, 0.30V output range, and 9mA max operating current. Ideal for applications requiring non-inverting analog voltage output in a compact rectangular package suitable for surface mount installations.
BSS138-7-F
Diodes Inc. BSS138-7-F is a N-channel FET with 50V DS breakdown voltage, 0.2A max drain current, and 3.5 ohm RDS(on). Ideal for switching applications in small outline packages with matte tin finish, operating up to 150°C peak reflow temp.
SS14
Surge Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SML-210VTT86L
ROHM
ROHM's SML-210VTT86L is a 1.25mm SINGLE COLOR LED with peak wavelength of 650nm, forward current of 0.025A, and luminous intensity of 8.15mcd. Ideal for surface mount applications in visible LEDs category, featuring colorless transparent lens and gold terminal finish.
570-0100-111F
Dialight
Dialight's 570-0100-111F is a single color LED array with separate, 3-element configuration. It has a peak wavelength of 627/590nm and max forward current of 0.03A. Ideal for applications requiring red light emission, such as indicator lights in electronic devices.
LTST-C170KGKT
Lite-on Technology
LTST-C170KGKT by Lite-on Technology is a 1.4mm GREEN LED with WATER CLEAR lens. It has a peak wavelength of 574nm, forward current of 0.03A, and luminous intensity of 35.0mcd. Ideal for surface mount applications in electronics due to its compact size and wide viewing angle of 130°.
LTST-C170CKT
LTST-C170CKT by Lite-on Technology is a 1.4mm single color LED with peak wavelength of 660nm. It has a max forward current of 0.04A and viewing angle of 130°, making it ideal for applications requiring red light emission in compact spaces.
150141GS73100
Wuerth Elektronik & Kg
150141GS73100 by Wurth Elektronik is a single color LED with a peak wavelength of 515nm and max forward current of 0.03A. With water clear lens, it has a viewing angle of 120° and nominal luminous intensity of 1000mcd. Ideal for surface mount applications in electronics for its compact size (2.4mm) and green light emission.
HLMP-3301
Hewlett Packard
SINGLE COLOR LED; Lens Type: DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb); Shape: ROUND; Maximum Forward Current: .03 A; Minimum Operating Temperature: -55 Cel;
LTW-C191TS5
LTW-C191TS5 by Lite-on Technology is a 1.1mm SINGLE COLOR LED with a viewing angle of 130° and nominal luminous intensity of 70.0 mcd. Ideal for surface mount applications, it operates b/w -20 to 80 °C, with a max forward current of 0.02 A.
LTST-C19HE1WT-H
Visible LEDs;
HLMP1719
Cml Technologies & Kg
HLMP1719 by Cml Technologies & Kg is a 3mm SINGLE COLOR LED with peak wavelength of 585nm. It has max forward current of 0.0075A and operates b/w -55 to 100°C. Ideal for applications requiring yellow light emission, such as indicator lights or signage displays.
HSMG-C191
Agilent Technologies
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 15.0; Lens Type: UNTINTED DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb);
597-6601-607F
Dialight's 597-6601-607F LED has a peak wavelength of 468nm, max forward current of 0.02A, and water-clear lens. Ideal for applications requiring blue light emission with a viewing angle of 70°. Operating temp range from -55°C to 85°C makes it suitable for various lighting solutions.
LXR7-SW65
Lumileds Holding B V
SINGLE COLOR LED;
HLMP-1301-E0002
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 4.95; Lens Type: DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb);
APG1608CGKC/T
Kingbright
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 60.0; Lens Type: WATER CLEAR; Shape: RECTANGULAR;
HSMG-C120
Broadcom
HSMG-C120 by Broadcom is a 1.2mm single color LED with peak wavelength of 570nm, ideal for applications requiring green light emission. With a max forward current of 0.02A and viewing angle of 155°, it's suitable for surface mount configurations in various electronic devices. Operating b/w -40°C to 85°C, this LED offers clear untinted nondiffused lighting with a nominal luminous intensity of 15.0mcd.
KPHBM-2012SURKCGKC
Kingbright Electronic
KPHBM-2012SURKCGKC by Kingbright Electronic is a 1.3mm DUAL COLOR LED with WATER CLEAR lens, HYPER RED/GREEN color, and 120cd min luminous intensity. Ideal for applications requiring separate elements like indicator lights in electronic devices due to its 2 functions and surface mounting feature. Operating temperature range from -40 to 85 °C ensures versatility in various environments.
553-0212F
Dialight's 553-0212F is a dual color LED array with separate, 2-element configuration. It has peak wavelengths of 650nm for green and 563nm for red, ideal for status indicators in electronics. With a max forward current of 0.007A and operating temperatures from -55°C to 100°C, it offers reliable performance in various applications.
568-0102-222F
Dialight's 568-0102-222F is a 3mm single color LED array with 4 separate elements. It has a peak wavelength of 565nm, forward current of 0.03A, and max voltage of 2.3V. Ideal for applications requiring green light emission with a viewing angle of 60° and nominal luminous intensity of 12.6mcd.
HLMP-1301-E0002 by Broadcom is a 3mm single color LED with peak wavelength of 635nm. It has a max forward current of 0.03A and nominal luminous intensity of 4.95mcd. Ideal for applications requiring high efficiency red light emission, such as indicator lights in electronic devices.
Fairchild Semiconductor
Fairchild Semiconductor's HLMP-3301 is a 5mm single color LED with peak wavelength of 635nm. It has a max forward current of 0.03A and operates b/w -55°C to 100°C. Ideal for applications requiring high efficiency red light emission, such as indicator lights in electronic devices.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
LGM67K-G1J2-24-Z
Osram Opto Semiconductors
Osram Opto Semiconductors' LGM67K-G1J2-24-Z is a 1.5mm single-color LED with peak wavelength of 572nm, emitting green light. It has a max forward current of 0.02A and viewing angle of 120°, suitable for surface mount applications in various electronic devices.
LGM67K-G1J2-24-0-2-R18-Z
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 4.45; Lens Type: COLORLESS CLEAR; Terminal Finish: PURE TIN OVER NICKEL;
LGM67K-H1J2-24
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 30.0; Lens Type: COLORLESS CLEAR; Terminal Finish: TIN OVER NICKEL;
LGM676-N2Q1-24-Z
Osram Opto Semiconductors' LGM676-N2Q1-24-Z is a 1.5mm GREEN LED with peak wavelength of 572nm, max forward current of 0.03A, and luminous intensity of 62.75mcd. Ideal for surface mount applications with a viewing angle of 120° and operating temperature range from -40 to 100 °C.
LGM670-HK
Infineon Technologies
SINGLE COLOR LED; Lens Type: CLEAR; Terminal Finish: Tin/Lead (Sn/Pb); No. of Functions: 1; Size: 1.5 mm; Viewing Angle: 120 deg;
LGM670-J
SINGLE COLOR LED; Lens Type: CLEAR; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Forward Voltage: 2.6 V; Minimum Operating Temperature: -55 Cel; Viewing Angle: 120 deg;
LGM670-J2
Visible LEDs; Lens Type: CLEAR; Terminal Finish: Tin/Lead (Sn/Pb); Viewing Angle: 120 deg; Minimum Operating Temperature: -40 Cel; Peak Wavelength (nm): 565;
LGM670-J2K2-1
Visible LEDs; Lens Type: CLEAR; Terminal Finish: Tin/Lead (Sn/Pb); Color At Wavelength: Green; Height: 1.4 mm; JESD-609 Code: e0;
LGM670-JM
SINGLE COLOR LED; Lens Type: CLEAR; Terminal Finish: Tin/Lead (Sn/Pb); Color: GREEN; Maximum Reverse Voltage: 5 V; Size: 1.5 mm;
LGM670-K
SINGLE COLOR LED; Lens Type: CLEAR; Terminal Finish: Tin/Lead (Sn/Pb); Peak Wavelength (nm): 565; Configuration: SINGLE; Maximum Forward Voltage: 2.6 V;
LGM670-K1
Visible LEDs; Lens Type: CLEAR; Terminal Finish: Tin/Lead (Sn/Pb); Viewing Angle: 120 deg; Maximum Forward Voltage: 2.6 V; Maximum Operating Temperature: 100 Cel;
LGM670-K2
Visible LEDs; Lens Type: CLEAR; Terminal Finish: Tin/Lead (Sn/Pb); Viewing Angle: 120 deg; Maximum Forward Voltage: 2.6 V; Minimum Operating Temperature: -40 Cel;
LGM670-K2M1-1
Visible LEDs; Lens Type: CLEAR; Terminal Finish: Tin/Lead (Sn/Pb); JESD-609 Code: e0; Minimum Luminous Intensity: 120 cd; Color At Wavelength: Green;
LGM670-L1
Visible LEDs; Lens Type: CLEAR; Terminal Finish: Tin/Lead (Sn/Pb); Height: 1.4 mm; Peak Wavelength (nm): 565; Color At Wavelength: Green;
LGM670-L2
Visible LEDs; Lens Type: CLEAR; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Forward Current: .03 A; Maximum Forward Voltage: 2.6 V; Maximum Operating Temperature: 100 Cel;
LGM670-M1
Visible LEDs; Lens Type: CLEAR; Terminal Finish: Tin/Lead (Sn/Pb); Viewing Angle: 120 deg; Peak Wavelength (nm): 565; Minimum Operating Temperature: -40 Cel;
LGM67K-G1H1-24
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 2.675; Lens Type: COLORLESS CLEAR; Viewing Angle: 120 deg;
LGM67K-G2J1-24
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 3.92; Lens Type: COLORLESS CLEAR; Size: 1.5 mm;
LGM67K-H2K1-24
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 6.275; Lens Type: COLORLESS CLEAR; Configuration: SINGLE;
LGM67K-G1H2-24
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 20.0; Lens Type: COLORLESS CLEAR; Terminal Finish: TIN OVER NICKEL;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved