Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
UP CONVERTER; Maximum Operating Temperature: 85 Cel; Minimum RF Output Frequency: 17700 MHz; Construction: COMPONENT; Minimum Intermediate Frequency (IF): 0 MHz; Maximum Intermediate Frequency (IF): 3750 MHz;
Median Price
-
Lifecycle Status
Suppliers In-Stock
4
In-Stock Inventory
1k+
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
Digiode
Semi Source
Cogito LLC
Parana Technologies
$1.631
$1.517
IDEA Electronic Components Group
$1.754
$1.666
DigiPath Technology Company
$2.736
$2.627
AZTECH Wire
$14.192
Semicontronic
$25.000
$24.375
$24.250
One Stop Electronics
$37.000
Authorized Procurement Solutions
Corphita
RF/Microwave Up/Down Converters HMC819LC5 attributes and parameters. Explore more RF/Microwave Up/Down Converters devices from Hittite Microwave
Characteristic Impedance:
Construction:
Maximum Intermediate Frequency (IF):
Minimum Intermediate Frequency (IF):
JESD-609 Code:
LO Tunable:
Maximum Operating Temperature:
Minimum Operating Temperature:
Maximum RF Output Frequency:
Minimum RF Output Frequency:
RF or Microwave Device Type:
Terminal Finish:
Minimum Up Conversion Gain:
HMC819LC5 RF & Microwave trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
NORWOOD, Mass. & CHELMSFORD, Mass.--(BUSINESS WIRE)-- Analog Devices, Inc. (NASDAQ:ADI), a global leader in high-performance semiconductors for signal processing applications, and Hittite Microwave Corporation (NASDAQ:HITT), an innovative designer and manufacturer of high performance integrated circuits, modules, subsystems and instrumentation for RF, microwave and millimeter wave applications, today announced that the two companies have entered into a definitive agreement whereby ADI will acquire Hittite for $78 per share in cash. The closing price of Hittite's common stock on June 6, 2014 was $60.56 per share. This agreement reflects a total enterprise value for Hittite of approximately $2 billion. ADI expects to fund the acquisition through a combination of cash on hand and short-term debt financing. The Boards of Directors of each company have approved the transaction, which is expected to close near the end of ADI's third fiscal quarter of 2014, subject to regulatory approvals and other customary closing conditions.
FDV303N
Fairchild Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Transistor Application: SWITCHING; JESD-609 Code: e3;
BSS138
Inter F E T
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Terminal Finish: TIN LEAD; Package Body Material: PLASTIC/EPOXY;
FDN306P
Onsemi
FDN306P by Onsemi is a P-CHANNEL FET with 12V DS Breakdown Voltage, ideal for SWITCHING applications. It features SINGLE configuration with BUILT-IN DIODE and GULL WING terminals. Operating in ENHANCEMENT MODE, it has a max ID of 2.6A and 0.04 ohm RDS(on), suitable for small outline packages at temperatures ranging from -55 to 150°C.
DS18B20Z/T&R
Maxim Integrated
DS18B20Z/T&R by Maxim Integrated is a 12-bit digital temperature sensor with a max supply voltage of 5.5V and an accuracy of 0.50°C. It features a 1-Wire interface, operates b/w -55°C to 125°C, and is ideal for applications requiring precise temperature monitoring in compact spaces.
1N4148WS
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
NXP Semiconductors
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Capar Components
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Forward Voltage (VF): 1 V; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Output Current: .15 A;
LL4148
International Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
BAV99
Nexperia
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LAN8720A-CP-TR
Microchip Technology
LAN8720A-CP-TR by Microchip: Ethernet transceiver with 100 Mbps data rate, operates at 3.3V, and consumes 54mA max supply current. Ideal for network interfaces in commercial applications due to its small size (4x4mm) and low power consumption.
Promax-johnton
MBRS140T3G
MBRS140T3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.6V and max output current of 1A. It operates b/w -65°C to 125°C, making it suitable for various applications requiring high-speed switching and low power loss in a small outline package style. The diode's matte tin terminal finish and dual position terminals enhance its performance in surface mount configurations.
MBR1560CT
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Surface Mount: NO; Maximum Operating Temperature: 150 Cel; Maximum Repetitive Peak Reverse Voltage: 60 V; Technology: SCHOTTKY; Maximum Non Repetitive Peak Forward Current: 150 A;
SMBJ18CA
Silicon Standard
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Excel (Suzhou) Semiconductor
CDSOT23-SM712
Bourns
Bourns CDSOT23-SM712 is a bidirectional Transient Voltage Suppressor diode with 400W peak power dissipation and 20uA reverse current. Ideal for surge protection in applications requiring a max clamping voltage of 14V, such as IEC-61000-4-2 compliant systems. Operates b/w -55°C to 150°C with matte tin finish and Gull Wing terminals.
CRCW080510K0FKEA
Vishay Intertechnology
Vishay Intertechnology's CRCW080510K0FKEA is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 reference standard compliance and -55 to 155 °C operating temperature range.
Jiangsu Changjiang Electronics Technology
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Package Style (Meter): SMALL OUTLINE; Maximum Drain Current (ID): .22 A; Package Shape: RECTANGULAR;
Uniohm
2N7002-7-F
Diodes Incorporated
Diodes Inc. 2N7002-7-F is a N-channel FET with 60V DS breakdown voltage, 0.115A max drain current, and 13.5 ohm RDS(on). Ideal for switching applications in enhancement mode operation. Features Gull Wing terminals, small outline package style, and operates up to 150°C.
HMC815BLC5TR
Analog Devices
Analog Devices' HMC815BLC5TR is an RF up converter with 21-27 GHz output frequency range, 7 dB min gain, and LO tunability. Ideal for applications requiring high-frequency conversion in RF/microwave systems. Operating temperature ranges from -40 to 85 °C, making it suitable for various environments.
MAX2320EUP+T
DOWN CONVERTER; Minimum Operating Temperature: -40 Cel; Terminal Finish: Matte Tin (Sn); Maximum RF Input Frequency: 2500 MHz; LO Tunable: YES; Maximum Intermediate Frequency (IF): 400 MHz;
MAX9993ETP+
MAX9993ETP+ by Analog Devices is an RF/Microwave DOWN CONVERTER with VSWR of 1.5, operating from -40 to 85 °C. It features LO tuning, 1700-2200 MHz RF input range, and 50-350 MHz IF output. Ideal for applications requiring high-performance RF signal conversion in a compact form factor.
TFF1018HN/N1,115
TFF1018HN/N1,115 by NXP Semiconductors is an RF/Microwave Up/Down Converter designed for surface mount applications. It operates b/w -40 °C to 85 °C and requires a 5V power supply with 16 terminals. Ideal for communication systems, it ensures reliable performance in various environments.
HMC6505ALC5
Analog Devices' HMC6505ALC5 is a RF up converter with 5500-8600 MHz output frequency range, 12 dB min gain, and 22 dBm max output power. Ideal for applications requiring high-frequency conversion in RF/microwave systems.
MAX2660
Analog Devices' MAX2660 is an RF up converter with a 40-2500 MHz output range and 8 dB gain. Ideal for applications requiring LO tunability, it offers a noise figure of 8 dB and supports IF frequencies from 10 to 500 MHz.
MAX2663EUT-T
UP CONVERTER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Package Body Material: PLASTIC/EPOXY; Technology: BIPOLAR; Maximum Noise Figure: 12.7 dB;
UPC2743GS-E1
Renesas Electronics
RF/Microwave Up/Down Converters; Mounting Feature: SURFACE MOUNT; No. of Terminals: 20; Package Body Material: PLASTIC/EPOXY; Technology: BIPOLAR; Minimum Operating Temperature: -20 Cel;
MAX9984ETP
DOWN CONVERTER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 20; Package Body Material: PLASTIC/EPOXY; Technology: BICMOS; Minimum Intermediate Frequency (IF): 50 MHz;
ADMV1014ACCZ
Analog Devices' ADMV1014ACCZ is a RF/Microwave DOWN CONVERTER with 32 terminals, LO tunable, and 50 ohm impedance. It operates b/w -40 to 85 °C, with RF input frequency ranging from 24-44 GHz. Ideal for applications requiring min noise figure of 8.5 dB and intermediate frequency up to 6 GHz.
HMC908LC5
HMC908LC5 by Analog Devices is a RF/Microwave DOWN CONVERTER with 8 dB Min Down Conversion Gain, 2.2 dB Max Noise Figure, and LO Tunable feature. It operates in temperatures ranging from -55°C to 85°C and supports RF input frequencies from 9 GHz to 12 GHz. Ideal for applications requiring high-performance RF signal conversion in various communication systems.
MAX9984ETP+TD
Analog Devices' MAX9984ETP+TD is a BICMOS RF Down Converter with 5V supply, 265mA current, LO tunability, and 400-1000MHz RF input range. It operates b/w -40 to 85 °C, has 20 terminals in PLASTIC/EPOXY package for SURFACE MOUNT applications at 50 ohm impedance.
MAX2324EUP+T
DOWN CONVERTER; Terminal Finish: Matte Tin (Sn); Maximum Noise Figure: 11.5 dB; Minimum Operating Temperature: -40 Cel; Minimum Down Conversion Gain: 11.3 dB; LO Tunable: YES;
ADMV4530ACCZ-RL7
Analog Devices' ADMV4530ACCZ-RL7 is an RF up converter with 27-31 GHz output range, 17 dB min gain, and 50 ohm impedance. Ideal for applications requiring high-frequency conversion in wireless communication systems. Operates b/w -40 to 85 °C with LO tunability and surface mounting feature.
MAX2684EUE
DOWN CONVERTER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 16; Package Body Material: PLASTIC/EPOXY; Minimum Down Conversion Gain: -.8 dB; Maximum Operating Temperature: 85 Cel;
ADMV1011AEZ
Analog Devices' ADMV1011AEZ is a RF/Microwave UP CONVERTER with 17-24 GHz output frequency range. Featuring 15 dB min up conversion gain, it operates from -40 to 85°C and supports LO tunability. Ideal for applications requiring high-frequency RF signal conversion in ceramic package with GAAS technology.
HMC571LC5RTR
Analog Devices' HMC571LC5RTR is a RF/Microwave Up/Down Converter with 32 terminals, operating at -55 to 85°C. It utilizes GaAs technology, requires 3.5V power supply, and draws a max current of 150mA. Ideal for applications requiring surface mount packages in ceramic material.
MAX2322EUP-T
DOWN CONVERTER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 20; Package Body Material: PLASTIC/EPOXY; LO Tunable: YES; Maximum Operating Temperature: 85 Cel;
MAX2325EGI-T
DOWN CONVERTER; Maximum Intermediate Frequency (IF): 400 MHz; JESD-609 Code: e0; Maximum RF Input Frequency: 950 MHz; Minimum Operating Temperature: -40 Cel; Construction: COMPONENT;
HPMX-7103-TR1
Broadcom
DOWN CONVERTER; Minimum RF Input Frequency: 400 MHz; Maximum Intermediate Frequency (IF): 400 MHz; Terminal Finish: Tin/Lead (Sn/Pb); Construction: COMPONENT; Maximum Noise Figure: 10 dB;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Hittite Microwave
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved