Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
MAX9993ETP+T by Analog Devices is an RF down converter with LO tunable feature. It operates b/w -40 to 85 °C, supporting RF input frequencies from 1700 to 2200 MHz. With a VSWR of 1.5 and IF range of 50-350 MHz, it's ideal for RF/Microwave applications.
Median Price
$12.240
Lifecycle Status
Suppliers In-Stock
8
In-Stock Inventory
1k+
Bristol Electronics
1+ parts
100+ parts
$9.914
1k+ parts
-
10k+ parts
R&J Components
Vyrian
Chip Stock
Cyclops Electronics Ltd
Dan-Mar Components
Digiode
Anansix
MARBEL Systems
$2.434
Texas Native Microelectronics
$2.798
$2.686
$2.602
$2.462
Kenton Components
$3.358
$2.955
Qasali Group International
$7.555
$7.026
$6.648
One Stop Electronics
$9.000
AZTECH Wire
$10.302
Semicontronic
$40.000
$39.000
$38.800
Metaverse IC Inc.
QUARKTWIN TECHNOLOGY LTD
Kepictronics
GreenTree Electronics
RC Electronics
Glotronic Ltd.
Authorized Procurement Solutions
Corphita
Low VSWR indicates efficient power transfer and minimal signal reflections, ensuring good performance and reliability.
Component construction typically offers high quality and performance, making this converter a reliable choice for RF/Microwave applications.
High maximum operating temperature allows for versatility in different operating environments, ensuring stable performance under varying conditions.
Wide temperature range capability enables operation in extreme cold environments, increasing the product's usability in various settings.
Matte Tin finish provides good solderability and corrosion resistance, enhancing the product's longevity and reliability.
Tunable LO (Local Oscillator) allows for flexibility in frequency selection, enabling customization and optimization of performance based on specific requirements.
Down converter design converts higher frequency RF signals to lower intermediate frequencies, facilitating compatibility with downstream components and systems.
Support for a low minimum RF input frequency allows for operation in various frequency bands, increasing the versatility of the product.
Standard 50 ohm impedance matches common RF systems, ensuring compatibility and efficient signal transmission.
Low minimum IF frequency allows for processing of signals at relatively low frequencies, making this converter suitable for a wide range of applications.
High maximum RF input frequency provides versatility in handling a wide range of RF signals, making the converter suitable for diverse applications.
Support for a minimum input power of 22 dBm ensures compatibility with various input power levels, enabling efficient signal processing and conversion.
High maximum IF frequency allows for processing signals at relatively higher frequencies, providing versatility in signal conversion and processing capabilities.
RF/Microwave Up/Down Converters MAX9993ETP+T attributes and parameters. Explore more RF/Microwave Up/Down Converters devices from Analog Devices
Characteristic Impedance:
Construction:
Maximum Intermediate Frequency (IF):
Minimum Intermediate Frequency (IF):
Minimum Input Power (CW):
JESD-609 Code:
LO Tunable:
Maximum Operating Temperature:
Minimum Operating Temperature:
Maximum RF Input Frequency:
Minimum RF Input Frequency:
RF or Microwave Device Type:
Terminal Finish:
Maximum Voltage Standing Wave Ratio:
MAX9993ETP+T RF & Microwave trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
Analog Devices Inc. (ADI) is one of the leading companies in the areas of integrated circuit (IC) design, manufacturing, testing, and marketing. ADI is known for their high-performance semiconductor solutions which enable customers to create innovative systems that solve critical challenges. The company has over 40 years of experience in the industry and has been consistently recognized as an industry leader for its innovation as well as its commitment to quality products and services. They have garnered numerous awards throughout the years including awards from Gartner Magic Quadrant for Industrial IoT Platforms; Frost & Sullivan’s Global Product Leadership Award; and various awards relating to automotive safety technology such as JESD209-3 Automotive Grade Certifications from AEC-Q100.
CEO
Vincent Roche
Interim CFO
James Mollica
CAO
Michael Sondel
Limerick Fab
Fabrication
Fab Initiation
1977
Ireland
Limerick
Wafer Capacity
30,000
Hillview Fab
2001
USA
Milpitas
15,000
Wilmington Fab
1967
Wilmington
50,000
Camas Fab
1997
Camas
18,000
Beaverton-Portland
1987
Beaverton
14,000
2N7002
Jiangsu Changjiang Electronics Technology
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Operating Mode: ENHANCEMENT MODE; Transistor Application: SWITCHING;
LL4148
Vishay Intertechnology
Vishay Intertechnology's LL4148 diode features a max reverse recovery time of 0.004 us, forward voltage of 1 V, and output current of 0.15 A. Ideal for rectification applications in electronics due to its high efficiency and low power dissipation capabilities.
BSS138K-13
Diodes Incorporated
BSS138K-13 by Diodes Inc. is a N-channel FET with 50V DS breakdown voltage, ideal for switching applications. It features single configuration with built-in diode, operating in enhancement mode. With 3 terminals and 0.31A max drain current, it offers high performance in small outline package style.
BSS138
Changzhou Galaxy Century Microelectronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Minimum DS Breakdown Voltage: 50 V; Maximum Operating Temperature: 150 Cel;
SMBJ18CA
Good-ark Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V; Maximum Time At Peak Reflow Temperature (s): 10; JESD-609 Code: e3;
OPA2227UA
Texas Instruments
OPA2227UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 200 uV and bias current of 0.01 uA. It operates at temperatures ranging from -40 to 85 °C, making it suitable for industrial applications requiring precise signal amplification. With a unity gain bandwidth of 8000 kHz, this op amp is ideal for high-frequency circuit designs.
BSS138LT3G
Onsemi
BSS138LT3G by Onsemi is a N-CHANNEL FET with a min DS breakdown voltage of 50V. It is used for switching applications and has a max drain current of 0.2A and max drain-source on resistance of 3.5 ohm.
Diotec Semiconductor Ag
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Time At Peak Reflow Temperature (s): 10; Terminal Finish: MATTE TIN;
Fairchild Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Time At Peak Reflow Temperature (s): 30; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
1N4148
Renesas Technology
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Db Lectro
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Shanghai Lunsure Electronic Technology
RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): 1 V; Maximum Non Repetitive Peak Forward Current: .5 A; No. of Elements: 1; Maximum Reverse Recovery Time: .004 us;
2N2222A
New Jersey Semiconductor Products
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Package Shape: ROUND;
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: J BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
DS18B20
Dallas Semiconductor
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 3; Package Shape or Style: ROUND; Housing: PLASTIC; Output Interface Type: 1-WIRE INTERFACE;
MS3V-T1R32.768KHZ+/-20PPM12.5PF
Golledge Electronics
MS3V-T1R32.768KHZ+/-20PPM12.5PF by Golledge Electronics is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 12.5 pF load capacitance. It is ideal for applications requiring precise timing in temperature-sensitive environments due to its -40 to 85 °C operating range.
General Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
FDV303N
FDV303N by Onsemi is a N-CHANNEL FET with 25V DS Breakdown Voltage, 0.68A Drain Current, and 0.45 ohm On Resistance. Ideal for SWITCHING applications, it operates in ENHANCEMENT MODE at temperatures ranging from -55 to 150°C. Package style is SMALL OUTLINE with GULL WING terminals for surface mount assembly.
LL4148GS08
Temic Semiconductors
LL4148GS08 by Temic Semiconductors is a glass diode with a max reverse recovery time of 0.008 us and max forward voltage of 1 V. It is a rectifier diode with a max output current of 0.15 A, ideal for applications requiring fast switching speeds and low power dissipation in electronic circuits.
M39029/56-351
TE Connectivity
TE Connectivity's M39029/56-351 is a CRIMP contact type backshell accessory with rated voltage of 115V. It operates b/w -65 to 175 °C, suitable for MIL-C-39029/56 connectors with wire gauge ranging from 28 to 22 AWG. Ideal for military applications requiring female contacts and copper alloy material.
F1178NBGI8
Renesas Electronics
DOWN CONVERTER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 36; Package Body Material: PLASTIC/EPOXY; Package Equivalence Code: LCC36,.25SQ,20; JESD-609 Code: e3;
MAX2106UCM-TD
Maxim Integrated
DOWN CONVERTER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 48; Package Body Material: PLASTIC/EPOXY; Minimum Operating Temperature: 0 Cel; Construction: COMPONENT;
MAX2682EUT-T
MAX2682EUT-T by Maxim Integrated is a RF/Microwave Down Converter with 1.5 VSWR, 8.7 dB min gain, and 50 ohm impedance. Ideal for applications requiring RF signal conversion from 400 MHz to 2500 MHz with LO tunability and surface mount installation.
TUA6110XS
Infineon Technologies
DOWN CONVERTER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 28; Package Body Material: PLASTIC/EPOXY; Technology: BIPOLAR; Maximum Operating Temperature: 80 Cel;
MAX2680
Analog Devices
MAX2680 by Analog Devices is an RF/Microwave DOWN CONVERTER with 11.6 dB Min Gain, 400-2500 MHz RF Input Frequency range, and 10-500 MHz IF range. It features LO Tuning capability and a Noise Figure of 6.3 dB. Ideal for applications requiring high-performance RF signal conversion in various frequency bands.
ADMV4640BCPZN
DOWN CONVERTER;
HMC1190ALP6NE
HMC1190ALP6NE by Analog Devices is a RF/Microwave DOWN CONVERTER with 40 terminals, LO Tunable feature, and 3.3V power supply. It operates b/w -40 to 85 °C, has a min down conversion gain of 4.7 dB, and supports RF input frequencies from 700 MHz to 3800 MHz. Ideal for applications requiring high-performance RF signal processing in various electronic systems.
HPMX-7123-TR1
Broadcom
DOWN CONVERTER; Terminal Finish: Tin/Lead (Sn/Pb); JESD-609 Code: e0; Minimum Down Conversion Gain: 12.5 dB; Minimum RF Input Frequency: 400 MHz; Maximum RF Input Frequency: 2400 MHz;
MAX2700ECM-T
DOWN CONVERTER; Minimum RF Input Frequency: 1800 MHz; Maximum Voltage Standing Wave Ratio: 1.7; Maximum RF Input Frequency: 2100 MHz; Minimum Operating Temperature: -40 Cel; Characteristic Impedance: 50 ohm;
MAX2104CCM+
DOWN CONVERTER; LO Tunable: YES; Minimum Operating Temperature: 0 Cel; Construction: COMPONENT; Characteristic Impedance: 50 ohm; Terminal Finish: Matte Tin (Sn);
ADMV7420BCEZ
Analog Devices' ADMV7420BCEZ is a RF/Microwave DOWN CONVERTER with 34 terminals, LO Tunable feature, and 1.92 VSWR. It operates b/w -40 to 85 °C, has a min gain of 6 dB, and supports RF input frequencies from 81-86 GHz. Ideal for applications requiring high-performance RF signal conversion in compact setups.
F1751NBGI8
DOWN CONVERTER; Minimum Intermediate Frequency (IF): 50 MHz; Construction: COMPONENT; Minimum RF Input Frequency: 1400 MHz; Maximum Operating Temperature: 105 Cel; LO Tunable: YES;
MAX2661EUT-T
UP CONVERTER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Package Body Material: PLASTIC/EPOXY; Technology: BIPOLAR; Minimum RF Output Frequency: 400 MHz;
5010
Herley Industries
DOWN CONVERTER; Maximum Intermediate Frequency (IF): 1450 MHz; Minimum Intermediate Frequency (IF): 950 MHz; Maximum Voltage Standing Wave Ratio: 2.2; Construction: COAXIAL; Maximum Noise Figure: 2.5 dB;
UPC2758T
RF/Microwave Up/Down Converters; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Package Body Material: PLASTIC/EPOXY; Technology: BIPOLAR; Minimum Operating Temperature: -40 Cel;
UPC2758TB-E3-A
California Eastern Laboratories
DOWN CONVERTER; Minimum Intermediate Frequency (IF): 20 MHz; Maximum Noise Figure: 15 dB; Maximum Intermediate Frequency (IF): 300 MHz; Minimum Down Conversion Gain: 14 dB; LO Tunable: YES;
F1192BNLGK
DOWN CONVERTER; JESD-609 Code: e3; Terminal Finish: Tin (Sn);
MAX2720EUP-T
UP CONVERTER; Minimum RF Output Frequency: 1700 MHz; Terminal Finish: TIN LEAD; Construction: COMPONENT; LO Tunable: YES; Minimum Operating Temperature: -40 Cel;
TRF1115IRGPTG3
TRF1115IRGPTG3 by Texas Instruments is a RF/Microwave DOWN CONVERTER with 16 dB Min. Down Conversion Gain, 2300-2700 MHz RF Input Frequency range, and 400-500 MHz IF. It operates at -40 to 85°C, requires 5V supply, and has a Noise Figure of max. 7 dB. Ideal for applications requiring high-performance RF signal conversion in various electronic systems.
UPB1004GS-E1
RF/Microwave Up/Down Converters; Mounting Feature: SURFACE MOUNT; No. of Terminals: 30; Package Body Material: PLASTIC/EPOXY; Technology: BIPOLAR; Minimum Operating Temperature: -20 Cel;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
ADMV8420ACPZ
Analog Devices' ADMV8420ACPZ is a 24-terminal BAND PASS FILTER with a Center Frequency of 15500 MHz and Input Impedance of 50Ω. Operating b/w -40°C to 85°C, it's ideal for applications requiring precise filtering in electronic systems.
ADN4693E-1BCPZ
ADN4693E-1BCPZ by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3.3V nominal voltage. It features a max transmit delay of 2.4ns and differential output for EIA/TIA-899 interface standard applications in industrial settings.
ADPA7005AEHZ
ADPA7005AEHZ by Analog Devices is a wide band medium power RF amplifier with 12 dB gain. It operates b/w 18-44 GHz, handling up to 27 dBm CW input power. Ideal for applications requiring high frequency amplification in temperatures ranging from -40 to 85°C.
ADPA7005AEHZ-R7
ADPA7005AEHZ-R7 by Analog Devices is a wide band medium power RF amplifier with 12 dB gain, operating from 18-44 GHz. It can handle up to 27 dBm CW input power and operates in temperatures ranging from -40 °C to 85°C. Ideal for applications requiring high frequency amplification in RF & microwave systems.
ADN4693E-1BCPZ-RL7
ADN4693E-1BCPZ-RL7 by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3.3V. It offers a max transmit delay of 2.4ns and max supply current of 24mA. Ideal for applications requiring differential output and EIA/TIA interface standards compliance in tight spaces due to its very thin profile chip carrier package style.
ADMV8420ACPZ-R5
ADMV8420ACPZ-R5 by Analog Devices is a 24-terminal BAND PASS FILTER with a Center Frequency of 15500 MHz and Input Impedance of 50 OHM. It operates b/w -40 to 85 °C and is ideal for applications requiring precise frequency filtering in electronic circuits.
ADPA7005CHIP
ADPA7005CHIP by Analog Devices is a wide band medium power RF amplifier with 11.5 dB gain, operating from 20-44 GHz. It can handle up to 27 dBm CW input power and operates in temperatures ranging from -55 °C to 85°C. Ideal for applications requiring high frequency amplification in RF & microwave systems.
AD3542RBCPZ16
AD3542RBCPZ16 by Analog Devices is a 16-bit D/A converter with max analog output voltage of 7.5V and linearity error of 0.006103%. It features a nominal settling time of 0.1us, making it ideal for applications requiring precise analog signal generation in temperature-sensitive environments. With a compact square package shape and surface mount capability, this chip carrier is suitable for space-constrained designs where high performance is essential.
ADAQ23876BBCZ
Analog Devices' ADAQ23876BBCZ is a 16-bit ADC with 0.00125% EL, 15 MHz sample rate, and 2'S COMPLEMENT BINARY output. Ideal for wireless data acquisition applications due to its compact GRID ARRAY package and fast 0.063 us conversion time. Operating from -40 to 85 °C, it offers precise analog-to-digital conversion in a small form factor.
AD3542RBCPZ16-RL7
AD3542RBCPZ16-RL7 by Analog Devices is a 16-bit D/A converter with max analog output voltage of 7.5V, 0.006103% linearity error, and 0.1us settling time. Ideal for applications requiring precise analog signal generation in temperature-sensitive environments.
MAX9993ETP+
DOWN CONVERTER; Maximum RF Input Frequency: 2200 MHz; Minimum Input Power (CW): 22 dBm; Maximum Operating Temperature: 85 Cel; Minimum Operating Temperature: -40 Cel; Maximum Intermediate Frequency (IF): 350 MHz;
MAX9986ETP+D
DOWN CONVERTER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 20; Package Body Material: PLASTIC/EPOXY; Technology: BICMOS; Maximum RF Input Frequency: 995 MHz;
MAX9996ETP+D
DOWN CONVERTER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 20; Package Body Material: PLASTIC/EPOXY; Technology: BICMOS; Minimum Down Conversion Gain: 7 dB;
MAX9996ETP+TD
MAX9984ETP+TD
DOWN CONVERTER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 20; Package Body Material: PLASTIC/EPOXY; Technology: BICMOS; Minimum RF Input Frequency: 400 MHz;
MAX9986ETP+
MAX9996ETP+
DOWN CONVERTER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 20; Package Body Material: PLASTIC/EPOXY; Technology: BICMOS; Minimum Operating Temperature: -40 Cel;
MAX9996ETP+T
DOWN CONVERTER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 20; Package Body Material: PLASTIC/EPOXY; Technology: BICMOS; Maximum RF Input Frequency: 2200 MHz;
MAX9993ETP+TD
DOWN CONVERTER; Minimum Intermediate Frequency (IF): 50 MHz; Maximum Intermediate Frequency (IF): 350 MHz; Minimum Input Power (CW): 22 dBm; Construction: COMPONENT; Minimum RF Input Frequency: 1700 MHz;
MAX9986ETP+TD
DOWN CONVERTER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 20; Package Body Material: PLASTIC/EPOXY; Technology: BICMOS; Minimum Down Conversion Gain: 9 dB;
MAX9986ETP+T
DOWN CONVERTER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 20; Package Body Material: PLASTIC/EPOXY; Technology: BICMOS; Characteristic Impedance: 50 ohm;
MAX9994ETP+D
DOWN CONVERTER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 20; Package Body Material: PLASTIC/EPOXY; Technology: BICMOS; JESD-609 Code: e3;
MAX9993ETP+D
DOWN CONVERTER; Characteristic Impedance: 50 ohm; Maximum Voltage Standing Wave Ratio: 1.5; Maximum RF Input Frequency: 2200 MHz; Terminal Finish: Matte Tin (Sn) - annealed; Minimum RF Input Frequency: 1700 MHz;
MAX9984ETP+D
DOWN CONVERTER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 20; Package Body Material: PLASTIC/EPOXY; Technology: BICMOS; Terminal Finish: Matte Tin (Sn) - annealed;
MAX9986ETP
DOWN CONVERTER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 20; Package Body Material: PLASTIC/EPOXY; Technology: BICMOS; LO Tunable: YES;
MAX9993ETP
DOWN CONVERTER; JESD-609 Code: e0; LO Tunable: YES; Characteristic Impedance: 50 ohm; Minimum RF Input Frequency: 1700 MHz; Maximum Operating Temperature: 85 Cel;
MAX9984ETP-T
DOWN CONVERTER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 20; Package Body Material: PLASTIC/EPOXY; Technology: BICMOS; Minimum Intermediate Frequency (IF): 50 MHz;
DOWN CONVERTER; Minimum RF Input Frequency: 1700 MHz; Terminal Finish: MATTE TIN; Characteristic Impedance: 50 ohm; Maximum Voltage Standing Wave Ratio: 1.5; LO Tunable: YES;
DOWN CONVERTER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 20; Package Body Material: PLASTIC/EPOXY; Technology: BICMOS; Terminal Finish: MATTE TIN;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved