Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
HALF BRIDGE BASED PERIPHERAL DRIVER; Peak Reflow Temperature (C): 260; Terminal Finish: Matte Tin (Sn); JESD-609 Code: e3; Moisture Sensitivity Level (MSL): 3; Maximum Time At Peak Reflow Temperature (s): 40;
Median Price
$4.425
Lifecycle Status
Suppliers In-Stock
18
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
$5.330
100+ parts
$3.240
1k+ parts
$2.940
10k+ parts
-
Chip1Stop
$6.780
$4.510
DigiKey
$6.810
$4.414
$4.271
Newark
$6.870
$4.460
$4.320
Arrow
$2.792
Verical
Farnell
$3.520
$3.290
Element14
Rochester
$2.990
$2.680
$2.520
Digiode
$3.686
Nova Conductors
$4.050
Maritex
$7.480
$3.911
Chip Stock
IBS Electronics
$4.004
$3.948
Anansix
DigiKey Marketplace
Vyrian
Flip Electronics
Ampacity Inc.
$2.820
Corphita
$3.492
Aranea Global
$3.969
$3.810
Argo Parts USA
Component Stockers USA
$4.350
$4.090
$3.710
Corohmni
$8.450
Aztec Data Supply Inc.
$12.661
Microchip USA
$25.230
iodParts Technologies Inc.
QUARKTWIN TECHNOLOGY LTD
Lixinc
UNI Independent Distributors
Authorized Procurement Solutions
Continental Prestige Electronics
$4.490
$4.160
A-Z Elektronik GmbH
Peripheral Drivers MC33931EKR2 attributes and parameters. Explore more Peripheral Drivers devices from Freescale Semiconductor
Interface IC Type:
JESD-609 Code:
Moisture Sensitivity Level (MSL):
Peak Reflow Temperature (C):
Terminal Finish:
Maximum Time At Peak Reflow Temperature (s):
MC33931EKR2 Interface ICs trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Assembly/Origin - Mult Dev A/T Site 28/Apr/2021
PCN Packaging - Mult Dev Pkg Seal 15/Dec/2020 All Dev Label Update 15/Dec/2020
On December 7, 2015, NXP completed the merger with Freescale Semiconductor; the merged company continued its operation as NXP Semiconductors N.V.
BSS138
NXP Semiconductors
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; No. of Terminals: 3; Maximum Drain Current (ID): .2 A; Operating Mode: ENHANCEMENT MODE;
LL4148
Rectron
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
261
Micronetics
Other Interface ICs; Temperature Grade: MILITARY; Terminal Form: FLAT; No. of Terminals: 14; Package Code: DFP; Package Shape: SQUARE;
BSS138K-13
Diodes Incorporated
BSS138K-13 by Diodes Inc. is a N-channel FET with 50V DS breakdown voltage, ideal for switching applications. It features single configuration with built-in diode, operating in enhancement mode. With 3 terminals and 0.31A max drain current, it offers high performance in small outline package style.
MMBF170LT1G
Onsemi
MMBF170LT1G by Onsemi is a N-CHANNEL FET with 60V DS Breakdown Voltage and 0.5A Drain Current. Ideal for SWITCHING applications, it operates in ENHANCEMENT MODE with a max power dissipation of 0.225W. This small outline transistor has a temperature range from -55 to 150 °C.
SS14
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Surface Mount: YES; Technology: SCHOTTKY; No. of Phases: 1; Config: SINGLE; Maximum Operating Temperature: 125 Cel;
2N2222A
Baneasa S A
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .8 A; Qualification: Not Qualified;
USB2514BI-AEZG
Microchip Technology
USB2514BI-AEZG by Microchip is a BUS CONTROLLER IC with 36 terminals, operating at 3.3V, supporting I2C, SMBUS, and USB buses. It has a clock frequency of up to 24MHz and can withstand industrial temperatures from -40°C to 85°C. This chip carrier package is surface mountable and suitable for various applications requiring USB connectivity.
SMMBT2222ALT1G
SMMBT2222ALT1G by Onsemi is a NPN BJT transistor with 3 terminals, 0.6A IC, and 40V VCE. It has a hFE of 75, fT of 300MHz, and operates up to 150°C. Ideal for small signal applications in automotive electronics due to AEC-Q101 compliance.
1N4148
Invensys Sensor Systems
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; Maximum Repetitive Peak Reverse Voltage: 100 V;
LM358M
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
Kec
RECTIFIER DIODE; Surface Mount: NO; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Non Repetitive Peak Forward Current: 2 A; Config: SINGLE; Maximum Operating Temperature: 200 Cel;
Fairchild Semiconductor
ESD5Z5.0T1G
ESD5Z5.0T1G by Onsemi is a unidirectional Trans Voltage Suppressor Diode with 5V reverse test voltage and 174W peak power dissipation. It is used for transient suppression in electronic circuits, meeting IEC-61000-4-2, 4-4 standards and UL recognized for reliability.
Shenzhen Yixinsemi Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
CRG0805F10R
TE Connectivity
TE Connectivity's CRG0805F10R is a 10 ohm fixed resistor with 1% tolerance and 0.125 W power dissipation. It features thick film technology, SMT package style, and matte tin over nickel terminal finish. Ideal for surface mount applications in electronics, offering a temperature coefficient of 200 ppm/°C and operating voltage of 150 V.
CC0603KRX7R9BB104
Yageo
Yageo's CC0603KRX7R9BB104 is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. With X7R temperature characteristics, it operates b/w -55 to 125°C. Ideal for surface mount applications in electronics due to its compact size of 1.6mm x 0.8mm x 0.8mm and wraparound terminals.
FDLL4148
SN65HVD230DR
Texas Instruments
SN65HVD230DR by Texas Instruments is a BICMOS technology interface circuit with 1Mbps data rate, suitable for industrial applications. It operates at 3.3V, has 8 terminals in a small outline package, and can withstand temperatures from -40 to 85°C.
BAV99
General Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
VND5050KTR-E
STMicroelectronics
VND5050KTR-E by STMicroelectronics is a peripheral driver with built-in protections for transient, over current, thermal, and under voltage. It operates within a supply voltage range of 4.5V to 36V and has 24 terminals in a small outline package style. Ideal for applications requiring buffer or inverter based peripheral drivers with sink output current flow direction.
ULN2803AN
YOUTAI SEMICONDUCTOR CO LTD
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: THROUGH-HOLE; No. of Terminals: 18; Package Code: DIP; Package Shape: RECTANGULAR; No. of Functions: 1;
NCV8402ADDR2G
NCV8402ADDR2G by Onsemi is a peripheral driver with 2 functions, AEC-Q101 screening level, and built-in protections for transient, over current, over voltage, and thermal issues. It has a max output current of 2A and is suitable for military-grade applications requiring buffer or inverter based peripheral drivers. Operating temperature ranges from -55 to 150°C.
AUIPS7111STRL
International Rectifier
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 4; Package Shape: RECTANGULAR; Package Style (Meter): SMALL OUTLINE, HEAT SINK/SLUG;
TPS22965DSGR
TPS22965DSGR by Texas Instruments is a Peripheral Driver with 8 terminals, operating b/w -40 to 105 °C. It has a supply voltage range of 2.5V to 5.7V and built-in transient protection. Ideal for industrial applications requiring source/sink current flow control in compact designs.
MAX14900EAGM+CKT
Analog Devices
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Peak Reflow Temperature (C): 260; Terminal Finish: Matte Tin (Sn) - annealed; Moisture Sensitivity Level (MSL): 3; Maximum Time At Peak Reflow Temperature (s): 30; JESD-609 Code: e3;
VN808CMTR-32-E
STMicroelectronics' VN808CMTR-32-E is a peripheral driver with 8 functions, operating at supply voltages of 10.5V to 32V. It offers built-in thermal and under voltage protections, suitable for automotive applications with a temperature range from -40°C to 125°C. The driver has a small outline package style, source output current flow direction, and turn-on/off times of 100us and 150us respectively.
VNS3NV04DP-E
VNS3NV04DP-E by STMicroelectronics is a peripheral driver with built-in thermal and overvoltage protections. It has 2 functions, 8 terminals, and a peak output current limit of 5A. Ideal for applications requiring sink output flow direction, it features a turn-on time of 1.35us and turn-off time of 10us in a small outline package style.
ULN2003D
Signetics
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Terminal Pitch: 1.27 mm;
A2982SLWTR
Allegro MicroSystems
Allegro MicroSystems' A2982SLWTR is a small outline peripheral driver with 8 functions and built-in transient protection. It operates b/w -20 to 85°C, with a supply voltage range of 5-50V. Ideal for applications requiring a max output current of 0.35A, such as buffer or inverter-based interface ICs.
TPS22965TDSGRQ1
TPS22965TDSGRQ1 by Texas Instruments is an 8-terminal peripheral driver with a supply voltage range of 2.5V to 5.5V and operating temperature from -40°C to 105°C. It features built-in transient protection, no-lead terminal form, and source/sink current flow direction. Ideal for industrial applications requiring buffer or inverter-based interface ICs in compact spaces due to its small outline package style.
VND5160AJ-E
VND5160AJ-E by STMicroelectronics is a peripheral driver with 36V max supply voltage, built-in protections, and 12 terminals. It is a CMOS technology-based buffer or inverter driver with turn-on time of 10us and turn-off time of 15us. Ideal for applications requiring sink output current flow direction and operating within the 4.5-36V power supply range.
LMD18200-2D/883
HB BASED PERIPHERAL DRIVER WITH PWM; Temperature Grade: AUTOMOTIVE; Terminal Form: THROUGH-HOLE; No. of Terminals: 24; Package Code: DIP; Package Shape: RECTANGULAR;
MCZ33996EK
Freescale Semiconductor
SIPO BASED PERIPHERAL DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 32; Package Code: HSSOP; Package Shape: RECTANGULAR;
BTS6163DXT
Infineon Technologies
BTS6163DXT by Infineon is a MOS technology peripheral driver with built-in protections for transient, over current, and over voltage. It operates at supply voltages ranging from 5.5V to 24V and has a nominal output peak current limit of 6.5A. This rectangular package is suitable for automotive applications requiring high reliability under harsh conditions.
L293DNEE4
L293DNEE4 by Texas Instruments is a half bridge based peripheral driver with 2 functions, 16 terminals, and a max output current of 1.2A. It operates b/w -40 to +70°C and is ideal for driving inductive loads in robotics and motor control applications.
VN5T006ASP-E
STMicroelectronics' VN5T006ASP-E is a peripheral driver with 10 terminals, AEC-Q100 screening, and built-in protections against various faults. It operates b/w -40 to 150 °C with a supply voltage range of 8-36 V. Ideal for automotive applications requiring a buffer or inverter-based peripheral driver with a nominal output peak current limit of 115 A.
FDC6323L
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 6; Package Code: LSSOP; Package Shape: RECTANGULAR; No. of Functions: 1;
SN75451BDR
SN75451BDR by Texas Instruments is a peripheral driver with 2 functions, operating at 5V. It features open-collector output polarity and can handle a max output current of 0.5A. Ideal for applications requiring AND gate based peripheral drivers in commercial temperature grades.
ULN2003V12PWR
ULN2003V12PWR by Texas Instruments is a 7-bit peripheral driver with a nominal output peak current limit of 1A. It features built-in transient protections and operates b/w -40°C to 125°C. Ideal for applications requiring inverted output polarity and sink current flow direction in a small outline, thin profile package.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
MC33879APEK-R2
MC33879APEK-R2 by Freescale is a peripheral driver with 32 terminals, operating at -40 to 125 °C. It offers built-in protections for transient, over current, and over voltage situations. Ideal for automotive applications due to its MOS technology and true output polarity.
MC33879APEKR2,518
MC33879APEKR2,518 by NXP Semiconductors is a peripheral driver with 32 terminals and built-in protections for transient, over current, and over voltage. Operating at -40 to 125 °C, it has a supply voltage range of 3.1-5.5 V and output polarity is true. Ideal for automotive applications due to its MOS technology and sink output current flow direction.
MC33879TEK
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 32; Package Code: HSSOP; Package Shape: RECTANGULAR;
MC33932VW
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Moisture Sensitivity Level (MSL): 3; Peak Reflow Temperature (C): 245; Maximum Time At Peak Reflow Temperature (s): 30;
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Moisture Sensitivity Level (MSL): 3; Maximum Time At Peak Reflow Temperature (s): 30; Peak Reflow Temperature (C): 245; Screening Level: AEC-Q100;
MC33879TEKR2
MC33879TEK-R2
MC33879APEK
MC33298DWR2
Motorola
SIPO BASED PERIPHERAL DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 24; Package Code: SOP; Package Shape: RECTANGULAR;
MC33298DW/R2
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 24; Package Code: SOP; Package Shape: RECTANGULAR;
MC33932EK
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Screening Level: AEC-Q100; Terminal Finish: TIN; Moisture Sensitivity Level (MSL): 3; Peak Reflow Temperature (C): 260; Maximum Time At Peak Reflow Temperature (s): 40;
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Maximum Time At Peak Reflow Temperature (s): 40; Peak Reflow Temperature (C): 260; JESD-609 Code: e3; Moisture Sensitivity Level (MSL): 3; Terminal Finish: Matte Tin (Sn);
MC33932VW/R2
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 44; Package Code: HSSOP; Package Shape: RECTANGULAR;
MC33932VWR2
MC33932VWR2 by NXP Semiconductors is a peripheral driver with 44 terminals, operating voltage range of 8-28 V. It offers built-in protections against transient, over current, and over voltage. Ideal for automotive applications due to AEC-Q100 screening level and compact rectangular package style.
MC33879APEK,574
MC33298DW
MC33931EK
HALF BRIDGE BASED PERIPHERAL DRIVER; Peak Reflow Temperature (C): 260; JESD-609 Code: e3; Maximum Time At Peak Reflow Temperature (s): 40; Terminal Finish: Matte Tin (Sn); Moisture Sensitivity Level (MSL): 3;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved