Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
INTERFACE CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 12; Package Code: VQCCN; Package Shape: SQUARE;
Median Price
$0.300
Lifecycle Status
Suppliers In-Stock
17
In-Stock Inventory
1k+
Rochester
1+ parts
$0.226
100+ parts
$0.212
1k+ parts
$0.192
10k+ parts
-
DigiKey
$0.510
$0.276
$0.237
Newark
$0.525
$0.284
$0.243
Mouser Electronics
$0.530
$0.282
$0.218
Element14
$0.724
$0.355
$0.344
$0.311
Arrow
$0.206
Master Electronics
$0.268
$0.236
$0.208
Verical
$0.277
$0.244
Farnell
$0.323
$0.219
$0.217
Chip1Stop
$0.253
Digiode
$0.215
Nova Conductors
$0.901
Chip Stock
Flip Electronics
ACDS - Activité Composants Distribution Service
Vyrian
Semtec, LLC
Ampacity Inc.
$0.167
Semicontronic
$0.163
$0.162
Corohmni
$0.197
Corphita
$0.203
Argo Parts USA
Aztec Data Supply Inc.
$14.517
Futuretech Components
Metaverse IC Inc.
Perfect Parts
Infinite Electronics LLP (Excess)
Problanco Electronics
Continental Prestige Electronics
$0.990
$0.719
SupplyDigital Components
GreenTree Electronics
A-Z Elektronik GmbH
Kulean Microsystems
Formix International (Excess)
Alle Elektronik GmbH
QUARKTWIN TECHNOLOGY LTD
Netroflash
$0.883
$0.856
$0.838
Supply Digital
TANS Electronics
UHIMA Technologies
Other Function Interface ICs FXMAR2104UMX attributes and parameters. Explore more Other Function Interface ICs devices from Fairchild Semiconductor
Interface IC Type:
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Power Supplies (V):
Qualification:
Maximum Seated Height:
Sub-Category:
Maximum Supply Voltage:
Minimum Supply Voltage:
Nominal Supply Voltage:
Surface Mount:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Width:
FXMAR2104UMX Interface ICs trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Design/Specification - Marking Content 19/Nov/2013 Logo 17/Aug/2017
PCN Assembly/Origin - Mult Dev 06/Jan/2023
PCN Packaging - Mult Devices 24/Oct/2017
In 2016 Fairchild was acquired by ON Semiconductor (after 2022, onsemi). Fairchild Semiconductor International, Inc. was an American semiconductor company based in San Jose, California. Founded in 1957 as a division of Fairchild Camera and Instrument, it became a pioneer in the manufacturing of transistors and of integrated circuits. Schlumberger bought the firm in 1979 and sold it to National Semiconductor in 1987; Fairchild was spun off as an independent company again in 1997. In September 2016, Fairchild was acquired by ON Semiconductor. The company had locations in the United States at San Jose, California; San Rafael, California; South Portland, Maine; West Jordan, Utah; and Mountaintop, Pennsylvania. Outside the US it operated locations in Australia;[4] Singapore; Bucheon, South Korea; Penang, Malaysia; Suzhou, China; and Cebu, Philippines, among others.
AT90CAN128-16AUR
Microchip Technology
AT90CAN128-16AUR by Microchip: 16 MHz clock, 8-bit data RAM, and 131072 ROM words. Ideal for industrial applications with CAN, SPI, TWI connectivity and low power mode. Contains 4 timers, 8 ADC channels, and supports up to 10-bit analog to digital conversion.
KSZ9031RNXIA
KSZ9031RNXIA by Microchip is a 48-terminal Ethernet transceiver with data rate of 1000 Mbps. Operating temperature range from -40 to 85°C makes it suitable for industrial applications. This square-shaped chip carrier has a very thin profile and matte tin finish, ideal for network interfaces.
CR0805-FX-10R0ELF
Bourns
Bourns CR0805-FX-10R0ELF is a SMT fixed resistor with 10 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for applications requiring a temperature range of -55 to 155 °C, such as automotive electronics and industrial control systems.
SMBJ18CA
General Instrument
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
DS18B20Z
Dallas Semiconductor
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Housing: PLASTIC; Maximum Accuracy (Cel): 0.50;
MMBT2222ALT1G
Onsemi
MMBT2222ALT1G by Onsemi is a NPN BJT transistor with 3 terminals, max power dissipation of 0.3W, and hFE of 75. Ideal for switching applications, it operates b/w -55 to 150 °C with a max collector-emitter voltage of 40V. This surface-mount device has a transition frequency of 300MHz and turn-on time of 35ns.
RK73H2ATTD10R0F
Koa Speer Electronics
RK73H2ATTD10R0F by Koa Speer Electronics is a 0805 SMT fixed resistor with 10 ohm resistance, 1% tolerance, and 0.25 W power dissipation. Ideal for surface mount applications in automotive electronics due to its AEC-Q200 reference standard and operating voltage of 150 V.
General Diode
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Reverse Recovery Time: .004 us; Terminal Finish: Tin/Lead (Sn/Pb); No. of Elements: 1;
BAV99
Itt Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LM555CN
Rca Solid State
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
Changzhou Starsea Electronics
LL4148
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
LM358N
NXP Semiconductors
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
1N4148WT
Diodes Incorporated
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Texas Instruments
LM555CN by Texas Instruments is an Analog Waveform Generation IC with a supply voltage range of 4.5V to 16V. It operates b/w 0°C to 70°C, making it suitable for commercial applications. This rectangular package IC has dual terminals and uses bipolar technology for pulse generation in various electronic circuits.
STM32H743XIH6
STMicroelectronics
STM32H743XIH6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, 36-Ch 16-Bit ADC, and 2-Ch 12-Bit DAC. It operates at up to 48 MHz, has 1085440 bytes of RAM, and offers connectivity options like CAN, I2C, USB. Ideal for industrial applications requiring high-performance processing and extensive peripheral support.
Excel (Suzhou) Semiconductor
2N7002-7-F
Diodes Inc. 2N7002-7-F is a N-channel FET with 60V DS breakdown voltage, 0.115A max drain current, and 13.5 ohm RDS(on). Ideal for switching applications in enhancement mode operation. Features Gull Wing terminals, small outline package style, and operates up to 150°C.
LM317D2TG
LM317D2TG by Onsemi is an adjustable positive single output standard regulator with a max output current of 1.5A and a max output voltage of 37V. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
ISOW7842DWE
ISOW7842DWE by Texas Instruments is a digital isolator with 4 channels, operating at 3.3V nominal voltage and up to 5.5V max supply voltage. It features CMOS technology, dual terminal position, and small outline package style for automotive applications.
ISO7762DW
ISO7762DW by Texas Instruments is a 16-terminal IC with 6 functions, operating b/w -55 to 125 °C. It has a supply voltage range of 2.25-5.5 V and uses CMOS technology. This interface circuit in a small outline package is ideal for military-grade applications requiring high reliability and dual terminal positions.
TCA9517DGKR
TCA9517DGKR by Texas Instruments is an 8-terminal interface IC with a supply voltage range of 0.9V to 5.5V, suitable for industrial applications. It features a small outline package style, dual terminal position, and BICMOS technology, making it ideal for surface mount designs requiring reliable signal interfacing at temperatures ranging from -40°C to 85°C.
ISO7240CFDW
ISO7240CFDW by Texas Instruments is a digital isolator with 4 channels, CMOS technology, and 3.3V nominal voltage. It comes in a small outline package with gull wing terminals for automotive applications. Operating temperature ranges from -40 to 125°C, making it suitable for various industrial environments.
AY0438I/P
General Semiconductor
AY0438I/P by General Semiconductor is a 40-terminal CMOS IC with 32 segments, operating at 5V. It features a rectangular package style, PLASTIC/EPOXY body material, and Tin/Lead terminal finish. Ideal for applications requiring segment display mode in temperatures ranging from 0 to 85°C.
ISO7760FDW
ISO7760FDW by Texas Instruments is a CMOS interface IC with 6 functions, suitable for military-grade applications. It operates b/w -55 to 125 °C and supports a supply voltage range of 2.25-5.5 V. This small outline package has 16 terminals in a rectangular shape, making it ideal for surface mount designs.
PCA9548ADBR
PCA9548ADBR by Texas Instruments is an 8-channel interface IC with a supply voltage range of 2.3V to 5.5V. It operates in industrial temperature range (-40°C to 85°C) and has a small outline package style for surface mount applications. The terminal finish is Nickel/Palladium/Gold, making it suitable for various function interface circuits.
ADUM5402CRWZRL
Analog Devices
ADUM5402CRWZRL by Analog Devices is a 16-terminal interface IC with supply voltage range of 3V to 5.5V. It operates in industrial temperature range (-40°C to 105°C) and has small outline package style for surface mount applications. Ideal for various other function interface circuits requiring reliable performance in harsh environments.
PCA9615DPJ
PCA9615DPJ by NXP Semiconductors is a small outline, thin profile interface IC with 10 terminals. It operates b/w -40 to 85°C, with supply voltage ranging from 2.3V to 5.5V. Ideal for industrial applications requiring reliable communication at peak reflow temperature of 260°C.
ISOW7840FDWER
ISOW7840FDWER by Texas Instruments is a digital isolator with 4 channels, operating at -40 to 125°C. It features a supply voltage range of 3-5.5V and comes in a small outline package suitable for automotive applications. With surface mount capability and Gull Wing terminals, it offers reliable performance in various electronic systems.
MAX13035EETE+T
MAX13035EETE+T by Analog Devices is a 16-terminal interface IC with BICMOS technology. It operates b/w -40 to 85 °C, with supply voltages of 1.62-3.6 V. Ideal for industrial applications requiring a compact chip carrier package style and matte tin terminal finish.
ISO7762QDBQRQ1
ISO7762QDBQRQ1 by Texas Instruments is a digital isolator with 6 channels, operating at -40 to 125°C. It features a supply voltage range of 2.25-5.5V and AEC-Q100 screening for automotive applications. The package is small outline with dual gull wing terminals, suitable for surface mount assembly.
ADBMS6822WCCSZ-RL
ADBMS6822WCCSZ-RL by Analog Devices is an Interface IC with 2 functions, operating voltage range of 3V to 5.5V, and AEC-Q100 screening level. It comes in a square chip carrier package style suitable for automotive applications requiring a temperature range of -40°C to 125°C.
MAX7301AAI+
Maxim Integrated
INTERFACE CIRCUIT; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 28; Package Code: SSOP; Package Shape: RECTANGULAR;
MAX7301ATL+TGH7
MAX7301ATL+TGH7 by Maxim Integrated is a CMOS interface IC with 40 terminals, operating b/w -40 to 125 °C. It has a supply voltage range of 2.5V to 5.5V and is suitable for automotive applications due to its high-temperature grade. The package style is chip carrier with a very thin profile, making it ideal for space-constrained designs.
TXB0108RGYR
TXB0108RGYR by Texas Instruments is an 8-bit interface IC with a max supply voltage of 3.6V and operating temperature range of -40 to 85°C. It features a 20-terminal chip carrier package suitable for industrial applications, offering 3-STATE output characteristics and low supply current of 0.01mA. Ideal for various function interface requirements in electronic systems.
SI8660BC-B-IS1R
Silicon Labs
SI8660BC-B-IS1R by Silicon Labs is a digital isolator with 16 terminals, operating voltage range of 2.375V to 5.5V, and AEC-Q100 screening for automotive applications. It features CMOS technology, -40°C to 125°C temperature range, and GULL WING terminal form in a small outline package suitable for surface mount assembly.
LTC6820IMS#TRPBF
LTC6820IMS#TRPBF by Analog Devices is a CMOS interface IC with 16 terminals, operating from -40 to 85 °C. It has a supply voltage range of 2.7V to 5.5V and comes in a small outline package suitable for industrial applications requiring precise signal interfacing.
ISO6742FDWR
The Texas Instruments ISO6742FDWR is a CMOS interface IC with 4 functions, suitable for automotive applications. It operates b/w -40 to 125°C, with supply voltage ranging from 1.71V to 5.5V. This small outline package has 16 terminals and is surface mountable, making it ideal for various electronic systems.
MAX3738ETG
MAX3738ETG by Maxim Integrated is a 24-terminal interface IC with a supply voltage range of 2.97V to 3.63V, suitable for industrial applications. It operates in temperatures from -40°C to 85°C and features a square package style with a terminal pitch of 0.5mm. This bipolar technology chip carrier is surface-mountable and ideal for various other function interface applications.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
FXMA2102L8X
INTERFACE CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 8; Package Code: VQCCN; Package Shape: SQUARE;
FXMA2102L8X by Onsemi is a surface mount interface IC with 8 terminals, operating at supply voltages of 1.65V to 5.5V. With a package style of CHIP CARRIER and very thin profile, it is ideal for industrial applications requiring an interface circuit in tight spaces. This IC can withstand temperatures from -40°C to 85°C, making it suitable for various industrial environments.
FXMA2102UMX
FXMA2102UMX by Onsemi is a surface mount interface IC with 1 function, operating voltage range of 1.65V to 5.5V, and industrial temperature grade. It features a chip carrier package style, quad terminal position, and nickel palladium finish. Ideal for applications requiring precise signal interfacing in harsh environments.
INTERFACE CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 8; Package Code: VQCCN; Package Shape: RECTANGULAR;
FXMAR2102L8X
FXMAR2104UMX
FXMAR2104UMX by Onsemi is a surface mount interface IC with 12 terminals and a package style of CHIP CARRIER. It operates b/w -40 to 85 °C, with supply voltages ranging from 1.65V to 5.5V. Ideal for industrial applications requiring an interface circuit with a compact square shape and very thin profile design.
FXMA108BQX
INTERFACE CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 20; Package Code: HVQCCN; Package Shape: RECTANGULAR;
FXMAR2102UMX
FXMA2104UMX
FXMA9306MUX
INTERFACE CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: TSSOP; Package Shape: SQUARE;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved