Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
FOD2711S by Fairchild Semiconductor is a SINGLE optocoupler with max. forward current of 0.02A, min. collector-emitter breakdown voltage of 70V, and isolation voltage of 5000V. It is used in applications requiring high electrical isolation and signal transfer efficiency at temperatures ranging from -40°C to 85°C.
Median Price
$0.370
Lifecycle Status
Suppliers In-Stock
9
In-Stock Inventory
1k+
Rochester
1+ parts
-
100+ parts
1k+ parts
$0.307
10k+ parts
$0.274
DigiKey
$0.320
Verical
$0.384
$0.342
Nova Conductors
$0.271
Digiode
$0.288
American Microsemiconductor Inc.
$15.950
Vyrian
DigiKey Marketplace
Prism Electronics
Ampacity Inc.
$0.258
Argo Parts USA
$0.262
Continental Prestige Electronics
$0.265
Corphita
$0.273
Andel Nordic
$7.844
$7.530
A-Z Elektronik GmbH
Alle Elektronik GmbH
Supply Digital
Assy Fe
Netroflash
$0.257
$0.252
Perfect Parts
Single configuration allows for simple integration and easy setup in various applications.
With a high maximum forward current, this optocoupler transistor output can handle a range of loads with ease.
Transistor output optocoupler provides reliable signal isolation and switching capabilities.
High maximum operating temperature ensures stable performance in various environmental conditions.
Low minimum operating temperature allows for reliable operation even in extreme cold environments.
Matte tin terminal finish offers good conductivity and corrosion resistance for long-term reliability.
Low maximum dark current results in minimal leakage current, enhancing overall performance.
High minimum collector-emitter breakdown voltage provides protection against voltage spikes and overloads.
Nominal current transfer ratio ensures accurate signal transmission and consistent output.
High maximum isolation voltage ensures safe operation and effective isolation of signals.
Optocoupler Transistor Outputs FOD2711S attributes and parameters. Explore more Optocoupler Transistor Outputs devices from Fairchild Semiconductor
Additional Features:
Minimum Collector-emitter Breakdown Voltage:
Configuration:
Nominal Current Transfer Ratio:
Maximum Dark Current:
Maximum Forward Current:
Maximum Isolation Voltage:
JESD-609 Code:
No. of Elements:
Maximum Operating Temperature:
Minimum Operating Temperature:
Optoelectronic Type:
Terminal Finish:
FOD2711S Optoelectronics trade compliance attributes, and parameters.
HTS
8541.40.80.00
SB
In 2016 Fairchild was acquired by ON Semiconductor (after 2022, onsemi). Fairchild Semiconductor International, Inc. was an American semiconductor company based in San Jose, California. Founded in 1957 as a division of Fairchild Camera and Instrument, it became a pioneer in the manufacturing of transistors and of integrated circuits. Schlumberger bought the firm in 1979 and sold it to National Semiconductor in 1987; Fairchild was spun off as an independent company again in 1997. In September 2016, Fairchild was acquired by ON Semiconductor. The company had locations in the United States at San Jose, California; San Rafael, California; South Portland, Maine; West Jordan, Utah; and Mountaintop, Pennsylvania. Outside the US it operated locations in Australia;[4] Singapore; Bucheon, South Korea; Penang, Malaysia; Suzhou, China; and Cebu, Philippines, among others.
08055C104KAT2A
KYOCERA AVX
08055C104KAT2A by KYOCERA AVX is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic circuits.
LM107H
Raytheon Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Low-Offset: NO;
IRLML6401TRPBF
International Rectifier
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.3 W; Minimum Operating Temperature: -55 Cel; Avalanche Energy Rating (EAS): 33 mJ;
LM317T
Comset Semiconductors
Other Regulators; No. of Terminals: 3; Terminal Pitch: 2.54 mm; Minimum Output Voltage-1: 1.2 V; Technology: BIPOLAR; Operating Temperature (TJ-Max): 125 Cel;
2N7002
Calogic
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Peak Reflow Temperature (C): NOT SPECIFIED; Terminal Position: DUAL;
ABS25-32.768KHZ-1-T
Abracon
Abracon's ABS25-32.768KHZ-1-T crystal oscillator offers 10 ppm frequency tolerance, 126% stability, and 50000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal operating frequency, such as IoT devices and precision timing systems.
BSS138
NXP Semiconductors
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; No. of Terminals: 3; Maximum Drain Current (ID): .2 A; Operating Mode: ENHANCEMENT MODE;
DS18B20Z
Maxim Integrated
DS18B20Z by Maxim Integrated is a 12-bit digital temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, with ±0.5°C accuracy. Suitable for applications requiring precise temperature monitoring in compact spaces.
SMBJ18CA
Dc Components
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
06035C103KAT2A
06035C103KAT2A by KYOCERA AVX is a SMT ceramic capacitor with 0.01uF capacitance and 50V URdc. It has X7R temperature characteristics, -55 to 125 °C operating range, and 10% tolerance. Ideal for applications requiring compact surface mount capacitors with stable performance in a wide temperature range.
STM32H753ZIT6
STMicroelectronics
STM32H753ZIT6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, offering 20-Ch 16-Bit ADC and 2-Ch 12-Bit DAC channels. With a clock frequency of up to 48 MHz, it is ideal for industrial applications requiring CAN, Ethernet, and USB connectivity. This microcontroller operates b/w -40°C to +85°C temperature range.
Bourns
1N4148
Semiconductors
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Forward Voltage (VF): 1 V; Maximum Operating Temperature: 200 Cel; No. of Elements: 1;
BAV99
Panasonic
MIXER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148W-7-F
Multicomp Pro
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
International Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
BAV99-7-F
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Changzhou Starsea Electronics
SS14
General Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
M39029/58-360
Conesys
CONNECTOR ACCESSORY; MIL Conformity: YES; Mating Contacts: M39029/57-354; Terminal Type: CRIMP; DIN Conformity: NO; MIL-Connector Accessory Name: CONTACT;
LTV-817S-TA1-D
Lite-on Technology
LTV-817S-TA1-D by Lite-on Technology is a single optocoupler with max forward current of 0.05 A, operating temp range -30 to 110 °C. It features transistor output, min current transfer ratio of 300%, and max isolation voltage of 5000 V. Ideal for applications requiring high isolation and signal transmission efficiency in electronic circuits.
HMHA2801A
Fairchild Semiconductor
TRANSISTOR OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Tin (Sn); No. of Elements: 1; Minimum Operating Temperature: -55 Cel; Minimum Collector-emitter Breakdown Voltage: 80 V;
LTV247-V-G
LTV247-V-G by Lite-on Technology is a 4-channel optocoupler with separate configuration. It has a max forward current of 0.05A and an isolation voltage of 3750V, making it ideal for applications requiring high electrical isolation such as industrial control systems. With a fast response time of 18μs, this surface mount device ensures reliable performance in harsh environments.
PS2911-1-F3-AX
Renesas Electronics
PS2911-1-F3-AX by Renesas Electronics is a single optocoupler with max. forward current of 0.05A, ideal for applications requiring high isolation voltage up to 2500V. With a min. operating temp of -55°C and max. power dissipation of 0.12W, it's suitable for surface mount configurations in various electronic devices.
TLP293(GR-TPL,E
Toshiba
Toshiba's TLP293(GR-TPL,E is a single optocoupler with max. forward current of 0.05A, ideal for applications requiring high isolation voltage up to 3750V. With a min. C-E breakdown voltage of 80V and surface mount feature, it operates b/w -55°C to 125°C efficiently.
4N35
General Electric Solid State
TRANSISTOR OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Matte Tin (Sn); Configuration: SINGLE; JESD-609 Code: e3; Maximum On State Current: .1 A;
H11G2SM
Harris Semiconductor
Optocoupler - Transistor Outputs; Mounting Feature: SURFACE MOUNT; Terminal Finish: Tin/Lead (Sn/Pb); Minimum Operating Temperature: -55 Cel; JESD-609 Code: e0; Minimum Current Transfer Ratio: 1000 %;
TCMT1600
Telefunken Microelectronics
Optocoupler - Transistor Outputs; Mounting Feature: SURFACE MOUNT; Maximum Isolation Voltage: 3750 V; Maximum Operating Temperature: 100 Cel; Minimum Current Transfer Ratio: 20 %; No. of Elements: 1;
LTV-817-A
LTV-817-A by Lite-on Technology is a SINGLE optocoupler with max. forward current of 0.05A, collector-emitter breakdown voltage of 35V, and isolation voltage of 5000V. It is ideal for applications requiring high electrical isolation such as industrial control systems and power supplies due to its robust design and wide operating temperature range from -30°C to 110°C.
TCET1100
Optocoupler - Transistor Outputs; Mounting Feature: THROUGH HOLE MOUNT; Maximum Isolation Voltage: 3750 V; Maximum Forward Voltage: 1.6 V; Maximum Power Dissipation: .25 W; Maximum Forward Current: .06 A;
TLP181(GR-TPL,F)
Toshiba's TLP181(GR-TPL,F) is a single optocoupler with max. forward current of 0.02A, operating temp. range from -55 to 110°C, and isolation voltage of 3750V. Ideal for applications requiring high collector-emitter breakdown voltage, low dark current, and reliable signal transfer ratio of 100%.
CNY17-3S-TA-V
Lite-on Technology's CNY17-3S-TA-V is a SINGLE optocoupler with max. forward current of 0.06 A, operating temp. range -55 to 100°C, and isolation voltage of 5000 V. Ideal for applications requiring high collector-emitter breakdown voltage, low dark current, and reliable transistor output optocoupling.
SFH6156-4-X001T
Infineon Technologies
SFH6156-4-X001T by Infineon: Optocoupler with 0.06A forward current, 70V breakdown voltage, and 5300V isolation. Ideal for applications requiring high voltage protection and signal transmission in harsh environments.
SFH6156-3T
Optocoupler - Transistor Outputs; Mounting Feature: SURFACE MOUNT; Minimum Current Transfer Ratio: 34 %; Maximum Power Dissipation: .15 W; Maximum Isolation Voltage: 5300 V; Maximum On State Current: .05 A;
SFH690BT
TRANSISTOR OUTPUT OPTOCOUPLER; Terminal Finish: Tin/Lead (Sn/Pb); Nominal Current Transfer Ratio: 100 %; No. of Elements: 1; Minimum Operating Temperature: -55 Cel; Additional Features: UL RECOGNIZED;
TLP281-4(GB-TP,J,F
Toshiba's TLP281-4(GB-TP,J,F) is a 4-channel optocoupler with a max forward current of 0.05A and an isolation voltage of 2500V. It operates in temperatures ranging from -55 to 100 °C and has a min collector-emitter breakdown voltage of 80V. This optocoupler is commonly used for applications requiring electrical isolation b/w high-voltage systems and low-voltage control circuits.
MOCD217R2M
Onsemi
The Onsemi MOCD217R2M is a 2-channel optocoupler with separate configuration. It has a max forward current of 0.06 A and min operating temperature of -40°C, making it suitable for applications requiring high isolation voltage up to 2500 V such as industrial control systems and power supplies.
HCPL-817-300E
Agilent Technologies
TRANSISTOR OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Tin (Sn); Maximum Dark Current: 100 nA; Maximum Forward Voltage: 1.4 V; Maximum Power Dissipation: .15 W;
PS2801-4-A
Nec Electronics America
TRANSISTOR OUTPUT OPTOCOUPLER; Configuration: SEPARATE, 4 CHANNELS; Nominal Current Transfer Ratio: 80 %; Minimum Operating Temperature: -55 Cel; Maximum Operating Temperature: 100 Cel; No. of Elements: 4;
Nec Compound Semiconductor Devices
TRANSISTOR OUTPUT OPTOCOUPLER; Terminal Finish: Tin/Bismuth (Sn/Bi); Nominal Current Transfer Ratio: 80 %; Minimum Collector-emitter Breakdown Voltage: 80 V; Maximum Forward Current: .05 A; No. of Elements: 4;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
FOD2712AR2V
TRANSISTOR OUTPUT OPTOCOUPLER; Terminal Finish: Matte Tin (Sn); Maximum Operating Temperature: 85 Cel; Additional Features: UL RECOGNIZED, VDE APPROVED; No. of Elements: 1; Maximum Forward Current: .02 A;
FOD2712AR2V by Onsemi is a single optocoupler with a max forward current of 0.02 A and min operating temperature of -40°C, ideal for applications requiring high isolation voltage up to 2500 V. With a collector-emitter breakdown voltage of 70 V and surface mounting feature, it offers reliable performance in various electronic circuits.
FOD2712AR2
FOD2712AR2 by Onsemi is a single optocoupler with max forward current of 0.02A, min operating temp -40°C, and max isolation voltage of 2500V. Ideal for applications requiring high collector-emitter breakdown voltage, such as industrial control systems and power supplies.
TRANSISTOR OUTPUT OPTOCOUPLER; Terminal Finish: Matte Tin (Sn); No. of Elements: 1; Additional Features: UL RECOGNIZED; Maximum Forward Current: .02 A; Configuration: SINGLE;
FOD2742BR2
TRANSISTOR OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); Additional Features: UL RECOGNIZED; Minimum Current Transfer Ratio: 100 %; Maximum Operating Temperature: 85 Cel;
FOD2742BR2 by Onsemi is a single optocoupler with max forward current of 0.02A, min operating temp -25°C, and max isolation voltage of 2500V. Ideal for applications requiring high current transfer ratio, low dark current, and surface mounting feature.
FOD2742BR2V
TRANSISTOR OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); No. of Elements: 1; Maximum Forward Voltage: 1.5 V; Maximum Dark Current: 50 nA;
TRANSISTOR OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: MATTE TIN; Minimum Operating Temperature: -25 Cel; Maximum Forward Current: .02 A; Maximum On State Current: .05 A;
FOD2742BV
TRANSISTOR OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: MATTE TIN; Maximum Isolation Voltage: 2500 V; Maximum Power Dissipation: .085 W; No. of Elements: 1;
TRANSISTOR OUTPUT OPTOCOUPLER; Terminal Finish: Matte Tin (Sn); Nominal Current Transfer Ratio: 140 %; Maximum Operating Temperature: 85 Cel; Maximum Forward Current: .02 A; Minimum Collector-emitter Breakdown Voltage: 70 V;
FOD2712A
TRANSISTOR OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: MATTE TIN; Maximum On State Current: .05 A; Maximum Operating Temperature: 85 Cel; Maximum Isolation Voltage: 2500 V;
TRANSISTOR OUTPUT OPTOCOUPLER; Terminal Finish: Matte Tin (Sn); Additional Features: UL RECOGNIZED; No. of Elements: 1; Maximum Dark Current: 50 nA; Minimum Collector-emitter Breakdown Voltage: 70 V;
FOD2712AV
TRANSISTOR OUTPUT OPTOCOUPLER; Terminal Finish: Matte Tin (Sn); Additional Features: UL RECOGNIZED, VDE APPROVED; Maximum Operating Temperature: 85 Cel; Minimum Operating Temperature: -40 Cel; Minimum Collector-emitter Breakdown Voltage: 70 V;
TRANSISTOR OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: MATTE TIN; Maximum Forward Current: .02 A; Maximum Forward Voltage: 1.5 V; Minimum Collector-emitter Breakdown Voltage: 70 V;
FOD2742B
TRANSISTOR OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); Maximum Forward Voltage: 1.5 V; Minimum Operating Temperature: -25 Cel; Maximum Operating Temperature: 85 Cel;
TRANSISTOR OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: MATTE TIN; Maximum Dark Current: 50 nA; Maximum Power Dissipation: .085 W; Maximum Operating Temperature: 85 Cel;
FOD2741BSDV
FOD2741BSDV by Onsemi is a single optocoupler with a min C-E breakdown voltage of 70V. It has a max isolation voltage of 5000V and min current transfer ratio of 100%. Ideal for applications requiring high voltage isolation, such as industrial control systems.
TRANSISTOR OUTPUT OPTOCOUPLER; Terminal Finish: Matte Tin (Sn); Nominal Current Transfer Ratio: 100 %; Maximum Dark Current: 50 nA; No. of Elements: 1; Minimum Collector-emitter Breakdown Voltage: 70 V;
FOD2741AS
TRANSISTOR OUTPUT OPTOCOUPLER; Terminal Finish: Matte Tin (Sn); Maximum Operating Temperature: 85 Cel; Minimum Operating Temperature: -25 Cel; Additional Features: UL APPROVED; Maximum Forward Current: .02 A;
TRANSISTOR OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: MATTE TIN; JESD-609 Code: e3; Minimum Operating Temperature: -40 Cel; Maximum Power Dissipation: .085 W;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved