Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Exar's SP3232EBCA-L/TR is a Line Driver & Receiver with 16 terminals, operating at 3-5.5V. It features EIA-232-F, TIA-232-F, V.24, and V.28 interface standards for commercial-grade applications requiring Schmitt trigger input characteristics and dual-terminal position in a small outline package style.
Median Price
$1.230
Lifecycle Status
Suppliers In-Stock
10
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
100+ parts
$0.713
1k+ parts
$0.636
10k+ parts
$0.568
DigiKey
$0.711
$0.640
-
RS (Exports)
$0.584
Nova Conductors
$0.648
Ozdisan Elektronik
$1.102
Vyrian
NAC Semi
$0.587
Bristol Electronics
Inventory MP
Atlantic Semiconductor
Netroflash
$0.635
$0.616
$0.603
Component Stockers USA
$1.210
$0.790
$0.550
$0.470
Vigor
$1.220
Microchip USA
$3.732
QUARKTWIN TECHNOLOGY LTD
GreenTree Electronics
Perfect Parts
Authorized Procurement Solutions
Metaverse IC Inc.
The use of plastic/epoxy material helps in reducing the overall weight of the product, making it more portable and easier to handle.
The surface mount feature allows for easy installation and space-saving on the circuit board, improving overall design efficiency.
The high maximum supply voltage ensures compatibility with a wide range of systems and applications, providing flexibility in usage.
Having multiple functions in one device can help in saving space and cost, making the product more versatile and efficient.
Supporting multiple power supply options allows for compatibility with different systems and voltage requirements, increasing flexibility in usage.
The high number of terminals provides more connectivity options, enabling the product to interface with multiple devices or systems.
The low minimum operating temperature ensures reliable performance even in cold environments, making the product suitable for a wide range of applications.
The high maximum output low current allows for driving power-hungry devices or long cables without compromising signal integrity, ensuring robust performance.
Supporting multiple interface standards ensures compatibility with various communication protocols, making the product versatile and suitable for different applications.
Having multiple driver bits enhances data transmission capabilities, improving the overall performance and reliability of the product.
Line Drivers & Receivers SP3232EBCA-L/TR attributes and parameters. Explore more Line Drivers & Receivers devices from Exar
Differential Output:
Driver No. of Bits:
Input Characteristics:
Interface IC Type:
Interface Standard:
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Minimum Out Swing:
Maximum Output Low Current:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Power Supplies (V):
Qualification:
Maximum Receive Delay:
Receiver No. of Bits:
Maximum Seated Height:
Sub-Category:
Maximum Supply Current:
Maximum Supply Voltage:
Minimum Supply Voltage:
Nominal Supply Voltage:
Surface Mount:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Width:
SP3232EBCA-L/TR Interface ICs trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
BSS138LT3G
Onsemi
BSS138LT3G by Onsemi is a N-CHANNEL FET with a min DS breakdown voltage of 50V. It is used for switching applications and has a max drain current of 0.2A and max drain-source on resistance of 3.5 ohm.
LM358D-T
NXP Semiconductors
LM358D-T by NXP Semiconductors is a dual operational amplifier with 70dB CMRR, 1000kHz unity gain bandwidth, and 9000uV max input offset voltage. Widely used in commercial applications due to its small outline package and low bias current of 0.5uA.
1N4148
Continental Device India
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
OPA2277UA/2K5E4
Texas Instruments
OPA2277UA/2K5E4 by Texas Instruments is a dual operational amplifier with low-offset and micropower features. It has a max input offset voltage of 100uV, nominal common mode reject ratio of 140dB, and min slew rate of 0.8V/us. Ideal for industrial applications requiring precise signal amplification in compact designs.
STM32H743IIT6
STMicroelectronics
STM32H743IIT6 by STMicroelectronics is a 32-bit microcontroller with integrated cache and a max supply voltage of 3.6V. It is commonly used in industrial applications due to its wide temperature range (-40°C to 85°C) and various connectivity options (CAN, I2C, UART, USB).
SS14
Taiwan Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Shenzhen Yixinsemi Electronics
LM107H/883
Advanced Micro Devices
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Low-Offset: NO;
PAP-06V-S
J S T Mfg
PAP-06V-S by J S T Mfg is a 6-contact BOARD CONNECTOR with 94V-0 UL Flammability Code. It has FEMALE contacts, CRIMP termination, and comes WITH CABLE ASSEMBLY for CABLE mounting applications.
STM32F103C8T6
STM32F103C8T6 by STMicroelectronics is a 32-bit microcontroller with 48 terminals, operating at up to 16 MHz. It features 10-Ch 12-Bit ADC channels and 7 DMA channels, suitable for industrial applications requiring low power consumption and high-speed connectivity via CAN, I2C(2), SPI(2), USART(3), USB.
ABS25-32.768KHZ-1-T
Abracon
Abracon's ABS25-32.768KHZ-1-T crystal oscillator offers 10 ppm frequency tolerance, 126% stability, and 50000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal operating frequency, such as IoT devices and precision timing systems.
1N4148WS
Rugao Dachang Electronic
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
NC7WZ07P6X
The Onsemi NC7WZ07P6X is a logic gate with 2 functions, featuring a propagation delay of 4.8 ns at 1.8V supply voltage. With open-drain output characteristics, it operates in industrial temperatures from -40 to 85°C. Ideal for applications requiring fast signal processing and low power consumption in compact designs.
ULN2003ADR
ULN2003ADR by Texas Instruments is a NPN BJT with 7 elements, max IC of 0.5A, and VCEsat of 1.6V. Ideal for switching applications in small outline packages with Gull Wing terminals.
SMBJ18CA
Fagor Electronica S Coop
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
International Components
RECTIFIER DIODE; Surface Mount: NO; No. of Elements: 1; Terminal Finish: Tin/Lead (Sn/Pb); JESD-609 Code: e0; Maximum Reverse Recovery Time: .004 us;
M39029/58-360
Carlisle Interconnect Technologies
GENERAL CONN ACCESSORY; Associated Military - Specifications: MIL-C-55302/69, MIL-C-38999; Maximum Operating Temperature: 200 Cel; MIL-Connector Accessory: CONTACT; Terminal Type: CRIMP; MIL Conformity: YES;
Pro-an Electronic
LM358N
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
MAX3490EESA+
Maxim Integrated
LINE TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
LMH0387SLE/NOPB
LINE TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 48; Package Code: VQCCN; Package Shape: SQUARE;
MAX3232IDRE4
MAX3232IDRE4 by Texas Instruments is a Line Driver & Receiver with 16 terminals, operating at -40 to 85°C. It features a max supply voltage of 3.6V, transmit delay of 300ns, and output low current of 1.6A. Ideal for industrial applications requiring EIA-232-F, TIA-232-F, V.28 interface standard compatibility in compact designs with inverted output polarity.
SN75176ADRG4
SN75176ADRG4 by Texas Instruments is a Line Driver & Receiver with 8 terminals, operating at 5V. It features a max transmit delay of 60ns and differential output. Ideal for V.11 and EIA-422-B interface standards in commercial temperature grade applications.
MAX13487EESA+T
Analog Devices
MAX13487EESA+T by Analog Devices is a BICMOS line transceiver with EIA-422-B and EIA-485 interface standards. It operates at 5V, has 8 terminals, and supports differential input characteristics. With a max supply voltage of 5.25V, it is ideal for industrial applications requiring reliable communication over short distances.
MAX3232CUE-T
MAX3232CUE-T by Maxim Integrated is a Line Driver & Receiver with 3.3/5V power supplies, operating b/w 0-70°C. It features EIA-232 and EIA-562 interface standards, SCHMITT TRIGGER input characteristics, and GULL WING terminal form. Ideal for applications requiring reliable data transmission in commercial temperature environments.
MAX3232EEUE+T
LINE TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: TSSOP; Package Shape: RECTANGULAR;
SP3485CN-L/TR
Maxlinear
LINE TRANSCEIVER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
SP3232EEN-L
LINE TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR;
MAX3490EESA
MAX3490EESA by Maxim Integrated is a line driver/receiver with 3.3V supply, 35ns transmit delay, and EIA-422/EIA-485 interface standards. Ideal for industrial applications requiring differential output and Schmitt trigger input characteristics in a compact small outline package.
MAX3232IDWRG4
MAX3232IDWRG4 by Texas Instruments is a Line Driver & Receiver with 16 terminals. It operates at 3.3/5V, has a max supply voltage of 3.6V, and supports EIA-232-F interface standard. Ideal for industrial applications requiring reliable data transmission with low power consumption and fast transmit delay of 300ns.
SP485EN-L
MAX232EEPE+
MAX232EEPE+ by Analog Devices is a Line Driver & Receiver with 2 functions, operating at 5V. It has a max supply voltage of 5.5V and operates in industrial temperature range (-40 to 85°C). Ideal for EIA-232-E, TIA-232-E, V.28 interfaces in various applications requiring inverted output polarity and Schmitt trigger input characteristics.
MAX3232CDRE4
MAX3232CDRE4 by Texas Instruments is a Line Driver & Receiver with 16 terminals. It operates at 3.3/5V, has a max supply voltage of 3.6V, and offers inverted output polarity. Ideal for EIA-232-F, TIA-232-F, V.28 interfaces in commercial temperature grades applications.
MAX3232EEUE+T by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at -40 to 85 °C. It supports EIA-232, TIA-232 interfaces and has a max supply voltage of 5.5 V. Ideal for industrial applications requiring BICMOS technology and Schmitt trigger input characteristics.
MAX3485EESA-T
MAX3485EESA-T by Maxim Integrated is a CMOS Line Transceiver with EIA-422 and EIA-485 interface standards. It operates at 3.3V, has 8 terminals, and offers differential output. With a max transmit delay of 35ns, it's ideal for industrial applications requiring fast data transmission over short distances.
MAX232CSE+T
LINE TRANSCEIVER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR;
DS10BR150TSDX/NOPB
DS10BR150TSDX/NOPB by Texas Instruments is a Line Transceiver with 3.3V supply, 0.6ns max transmit/receive delay, and operates in -40 to 85°C range. Ideal for industrial applications requiring differential input characteristics and a compact chip carrier package.
ADM3202ARNZ-REEL7
ADM3202ARNZ-REEL7 by Analog Devices is a Line Driver & Receiver with 3.3V power supply, 5.5V max voltage, and 1.6A output current. Ideal for industrial applications requiring EIA-232-E, TIA-232-E, V.28 interface standard compliance in compact design with dual terminals and CMOS technology.
ISL81387IAZ-T7A
Intersil
LINE TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 20; Package Code: SSOP; Package Shape: RECTANGULAR;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
SP3232EEY-L/TR
Exar
Exar's SP3232EEY-L/TR is a Line Driver & Receiver with 16 terminals, operating at -40 to 85°C. It supports EIA-232 interface standard, with 3/5V power supplies and Schmitt trigger input characteristics. Ideal for industrial applications requiring reliable data transmission in compact spaces.
SP3232EEN-L/TR
Exar's SP3232EEN-L/TR is a 16-terminal line driver/receiver with 3-5V power supplies. It operates in industrial temperatures (-40 to 85°C) and supports EIA-232, V.24 interfaces. With dual terminals and Schmitt trigger input characteristics, it's ideal for data communication applications.
SP3232EEY-L
SP3232EBCN-L/TR
SP3232EBEY-L/TR
SP3232ECN-L/TR
SP3232EBEN-L/TR
Exar's SP3232EBEN-L/TR is a 16-terminal line driver/receiver with 3.3/5V power supplies, operating from -40 to 85°C. It features EIA-232-F, TIA-232-F, V.24, and V.28 interface standards for industrial applications requiring a max output low current of 1.6Amp and min out swing of 10V.
SP3232ECY-L/TR
Exar's SP3232ECY-L/TR is a Line Driver & Receiver with 16 terminals, operating at 3-5V. It features EIA-232 interface standard, Schmitt trigger input, and dual terminal position. Ideal for commercial applications requiring reliable data transmission in temperature range of 0-70°C.
SP3232EBCN-L
SP3232EEA-L
LINE TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SSOP; Package Shape: RECTANGULAR;
SP3232ECN-L
SP3232EEA-L/TR
Exar's SP3232EEA-L/TR is a 16-terminal line driver/receiver with dual terminal position, operating at -40 to 85 °C. It supports EIA-232 interface standard, with 3/5 V power supplies and 1 mA max supply current. Ideal for industrial applications requiring Schmitt trigger input characteristics and peak reflow temp of 260C.
SP3232EBCY-L/TR
LINE TRANSCEIVER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: TSSOP; Package Shape: RECTANGULAR;
SP3232ECY-L
SP3222ECY-L/TR
LINE TRANSCEIVER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 20; Package Code: TSSOP; Package Shape: RECTANGULAR;
SP3243EBEY-L/TR
LINE TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 28; Package Code: TSSOP; Package Shape: RECTANGULAR;
SP3232EET-L
Exar's SP3232EET-L is a 16-terminal line driver/receiver with 3-5V power supplies, operating from -40 to 85°C. It supports EIA-232, V.24 interfaces and has a max output low current of 1.6A, making it ideal for industrial applications requiring reliable communication over short distances.
SP3232EUCN-L
SP3232EBEN-L
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved