Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Exar's SP3232EET-L is a 16-terminal line driver/receiver with 3-5V power supplies, operating from -40 to 85°C. It supports EIA-232, V.24 interfaces and has a max output low current of 1.6A, making it ideal for industrial applications requiring reliable communication over short distances.
Median Price
$1.093
Lifecycle Status
Suppliers In-Stock
12
In-Stock Inventory
1k+
DigiKey
1+ parts
$1.320
100+ parts
$0.819
1k+ parts
$0.693
10k+ parts
$0.631
Mouser Electronics
$1.530
$0.899
$0.766
$0.709
Arrow
-
$0.683
$0.660
$0.603
Verical
RS (Exports)
$0.944
IBS Electronics
$0.754
$0.722
$0.682
Vyrian
NAC Semi
$0.892
LIBRA Elektronik GmbH
ComSIT Distribution GmbH
ComSIT USA
Nova Conductors
Vigor
$1.550
Component Stockers USA
$1.580
$1.030
Microchip USA
$10.400
$10.340
$10.300
$10.270
QUARKTWIN TECHNOLOGY LTD
Perfect Parts
Argo Parts USA
Authorized Procurement Solutions
Continental Prestige Electronics
Kepictronics
GreenTree Electronics
Bastille Electronics
PLASTIC/EPOXY - This material provides durability and protection for the internal components, making it a reliable choice.
YES - Surface mounting allows for easy and efficient installation on circuit boards, saving time and effort during assembly.
5.5 V - With a high maximum supply voltage, this product can handle a wide range of power sources.
2 - Having multiple functions in one device increases efficiency and reduces the need for additional components.
RECTANGULAR - The rectangular shape of the package allows for a compact design, saving space on the circuit board.
3/5 - This product can operate with both 3V and 5V power supplies, providing flexibility in different applications.
16 - The numerous terminals allow for versatile connections and compatibility with various systems.
SMALL OUTLINE - The small outline package style is ideal for space-constrained applications.
3 V - With a low minimum supply voltage, this product can operate efficiently in low-power scenarios.
85 °C - The high maximum operating temperature ensures reliable performance even in harsh environments.
Line Drivers & Receivers SP3232EET-L attributes and parameters. Explore more Line Drivers & Receivers devices from Exar
Differential Output:
Driver No. of Bits:
Input Characteristics:
Interface IC Type:
Interface Standard:
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Minimum Out Swing:
Maximum Output Low Current:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Power Supplies (V):
Qualification:
Maximum Receive Delay:
Receiver No. of Bits:
Maximum Seated Height:
Sub-Category:
Maximum Supply Current:
Maximum Supply Voltage:
Minimum Supply Voltage:
Nominal Supply Voltage:
Surface Mount:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Width:
SP3232EET-L Interface ICs trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
SS14
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
FDV304P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Moisture Sensitivity Level (MSL): 1; Maximum Drain Current (ID): .46 A;
ABS10-32.768KHZ-T
Abracon
Abracon's ABS10-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 122% stability, and 70000 ohm series resistance. Ideal for applications requiring precise timing at 0.032768 MHz, such as IoT devices and wearables due to its compact size and low power consumption.
NE555D
NXP Semiconductors
SQUARE; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: LSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
2N2222A
Infineon Technologies
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
1N4148
Itt Components
RECTIFIER DIODE; Surface Mount: NO; Config: SINGLE; Maximum Operating Temperature: 200 Cel; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Output Current: .15 A;
LM555CMX
Texas Instruments
LM555CMX by Texas Instruments is an Analog Waveform Generation IC with 8 terminals. It operates at a nominal voltage of 5V and supports power supplies ranging from 5V to 15V. This versatile IC, housed in a small outline package, is commonly used for pulse and rectangular waveform generation in commercial temperature environments.
LM7805CT
Integrated Circuit Technology
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Terminal Position: SINGLE; Operating Temperature (TJ-Min): 0 Cel;
2N7002
Lite-on Semiconductor
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Qualification: Not Qualified; Additional Features: LOW THRESHOLD; Minimum DS Breakdown Voltage: 60 V;
MBRS130LT3G
Onsemi
MBRS130LT3G by Onsemi is a Schottky rectifier diode with a max output current of 1A and forward voltage of 0.445V. It operates b/w -65 to 125°C, has a reverse test voltage of 30V, and is ideal for power applications due to its small outline package style.
L7805CV
STMicroelectronics
L7805CV by STMicroelectronics is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1.5A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring stable voltage regulation in electronic circuits.
LM107H/883
LM107H/883 by Texas Instruments is a MIL-STD-883 compliant operational amplifier with 3000uV max input offset voltage, 80dB common mode reject ratio, and 250kHz unity gain bandwidth. Ideal for military applications due to its -55 to 125 °C operating temperature range and robust metal package body material.
SMBJ18CA
Daco Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
M39029/58-360
Tri-star Electronics International
CONNECTOR ACCESSORY; Material: COPPER ALLOY; MIL Conformity: YES; Associated Military - Specifications: MIL-C-55302/69, MIL-C-38999; MIL-Connector Accessory Name: CONTACT; Terminal Type: CRIMP;
World Products
Nte Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 1 W; Maximum Collector Current (IC): .8 A; Terminal Form: WIRE;
CC0603KRX7R9BB104
Yageo
Yageo's CC0603KRX7R9BB104 is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. With X7R temperature characteristics, it operates b/w -55 to 125°C. Ideal for surface mount applications in electronics due to its compact size of 1.6mm x 0.8mm x 0.8mm and wraparound terminals.
Tesla Elektronicke Soucastky
0462-201-16141
TE Connectivity
TE Connectivity's 0462-201-16141 is a CRIMP terminal with MACHINED contact design. It operates b/w -55 to 125 °C, suitable for wire gauges from 20 to 16 AWG. With a rated current of 13A, it is ideal for applications requiring FEMALE ROUND PIN-SOCKET contacts.
CL10B104KB8NNNC
Samsung Electro-mechanics
CL10B104KB8NNNC by Samsung Electro-mechanics is a ceramic capacitor with capacitance of 0.1uF and rated DC voltage of 50V. It has a negative tolerance of 10% and temperature coefficient of 15ppm/°C, suitable for surface mount applications in various electronic devices. With dimensions of 1.6mm x 0.8mm x 0.9mm, it operates b/w -55 to 125 °C providing stable performance in compact designs.
DS26C32ATMX
National Semiconductor
LINE RECEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR;
PTHVD1400DRLR
PTHVD1400DRLR by Texas Instruments is an EIA-485-A/TIA-485-A line transceiver with differential output and input characteristics. It operates in automotive-grade conditions, with a max supply voltage of 5.5V and transmit delay of 500ns. This small outline package is ideal for applications requiring high-speed data transmission in tight spaces.
MAX202ECSE-T
Maxim Integrated
MAX202ECSE-T by Maxim Integrated is a Line Driver & Receiver with 5.5V max supply voltage, 2 functions, and 16 terminals. It operates b/w 0-70°C and has an inverted output polarity for EIA-232-E, TIA-232-E, V.28 interfaces. Ideal for commercial applications requiring CMOS technology and Schmitt trigger input characteristics.
MAX3430ESA
MAX3430ESA by Maxim Integrated is a Line Driver & Receiver with 3.63V max supply voltage, 1500ns max transmit delay, and 120ns max receive delay. Ideal for EIA-422, EIA-485, TIA-485 interfaces in industrial applications requiring differential output and Schmitt trigger input characteristics.
MAX3160EEAP+T
Analog Devices
MAX3160EEAP+T by Analog Devices is a Line Driver & Receiver with 20 terminals, operating at 3-5.5V. It features a max transmit delay of 800ns and max output low current of 2.5A. Ideal for industrial applications requiring EIA-232, EIA-422, or EIA-485 interface standards in compact designs.
P82B96PWG4
P82B96PWG4 by Texas Instruments is a Line Transceiver with 2 functions, operating at temperatures from -40 to 85°C. It has a max supply voltage of 15V and min of 2V, suitable for industrial applications. This IC features a small outline package with thin profile and shrink pitch, making it ideal for space-constrained designs.
LTC2862IS8-1#PBF
LTC2862IS8-1#PBF by Analog Devices is a CMOS line transceiver with EIA-422 and EIA-485 interface standards. It operates in industrial temperature range (-40 to 85°C) with 3.3V nominal voltage. With differential output, it has a max transmit delay of 50ns and receive delay of 65ns, making it suitable for various communication applications.
SN65HVD10DR
SN65HVD10DR by Texas Instruments is a line driver and receiver with a max supply voltage of 3.6V. It has a max transmit delay of 16ns and operates in an industrial temperature range. This IC is commonly used as a line transceiver for EIA-485-A, TIA-485-A, and ISO 8482 interfaces.
SP3072EEN-L
Exar
Exar SP3072EEN-L is a BICMOS line transceiver with EIA-422, EIA-485, TIA-485 interface standards. It operates at 3.3V with 1A max output low current and 1500ns transmit delay. Ideal for industrial applications requiring reliable differential signal transmission in harsh environments.
MAX3232ESE
MAX3232ESE by Maxim Integrated is a Line Driver & Receiver with 3.3/5V power supplies, operating temperature of -40 to 85 °C. It has EIA-232 and EIA-562 interface standards, Schmitt trigger input characteristics, and inverted output polarity. Ideal for industrial applications requiring reliable communication over long distances.
MAX3082ECSA+
LINE TRANSCEIVER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
LTM2881MPY-3#PBF
LTM2881MPY-3#PBF by Analog Devices is a Line Driver & Receiver with 32 terminals, operating at -55 to 105°C. It features a max transmit delay of 85ns and differential output for EIA-485-A/TIA-485-A/EIA-422 interfaces. Ideal for applications requiring precise signal transmission in industrial environments.
MAX3232ESE+
LINE TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR;
MAX202ECSE+
MAX202ECSE+ by Analog Devices is a Line Driver & Receiver with 2 functions, operating at 5V. It features a max supply voltage of 5.5V, output polarity is inverted, and uses CMOS technology. Ideal for EIA-232-E, TIA-232-E, V.28 interfaces in commercial temperature grade applications.
MAX3430ESA-T
MAX3430ESA-T by Maxim Integrated is a Line Driver & Receiver with 3.3V supply, EIA-422/EIA-485/TIA-485 interface standards, and BICMOS technology. It features 1500ns max transmit delay, 120ns max receive delay, and 1.6A max output low current. Ideal for industrial applications requiring reliable communication over long distances.
ISO3082DW
ISO3082DW by Texas Instruments is a line driver/receiver with 16 terminals, operating at 3.15-5.5V. It offers differential output, EIA-422/EIA-485 interface standards, and Schmitt trigger input for industrial applications requiring fast transmission speeds and low power consumption.
MAX3471EUA+T
MAX3471EUA+T by Analog Devices is a line driver with 8 terminals, operating at 2.5-5.5V, suitable for EIA-422 and EIA-485 interfaces. It offers differential outputs, low current of 0.1mA, and max transmit delay of 2000ns, making it ideal for industrial applications requiring reliable communication over short distances.
MAX3232ECAE+
LINE TRANSCEIVER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SSOP; Package Shape: RECTANGULAR;
MAX232EESE
MAX232EESE by Maxim Integrated is a Line Driver & Receiver with 2 functions, operating at 5V. It features inverted output polarity, Schmitt trigger input characteristics, and EIA-232-E interface standard. Ideal for industrial applications requiring reliable communication over long distances.
LT1785IS8#PBF
LT1785IS8#PBF by Analog Devices is a Line Driver & Receiver with 8 terminals, operating at -40 to 85 °C. It has a max supply voltage of 5.25 V and differential output characteristics. Ideal for EIA-422/EIA-485 interfaces in industrial applications due to its small outline package and dual terminal position.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
SP3232EEY-L/TR
Sipex
LINE TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: TSSOP; Package Shape: RECTANGULAR;
Maxlinear
Exar's SP3232EEY-L/TR is a Line Driver & Receiver with 16 terminals, operating at -40 to 85°C. It supports EIA-232 interface standard, with 3/5V power supplies and Schmitt trigger input characteristics. Ideal for industrial applications requiring reliable data transmission in compact spaces.
SP3232EEN-L/TR
Exar's SP3232EEN-L/TR is a 16-terminal line driver/receiver with 3-5V power supplies. It operates in industrial temperatures (-40 to 85°C) and supports EIA-232, V.24 interfaces. With dual terminals and Schmitt trigger input characteristics, it's ideal for data communication applications.
SP3232EEY-L
SP3232EEN-L
SP3232EBCN-L/TR
LINE TRANSCEIVER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR;
SP3232EBEY-L/TR
SP3232EBEN-L/TR
Exar's SP3232EBEN-L/TR is a 16-terminal line driver/receiver with 3.3/5V power supplies, operating from -40 to 85°C. It features EIA-232-F, TIA-232-F, V.24, and V.28 interface standards for industrial applications requiring a max output low current of 1.6Amp and min out swing of 10V.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved