Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
LINE TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: TSSOP; Package Shape: RECTANGULAR;
Median Price
$1.060
Lifecycle Status
Suppliers In-Stock
19
In-Stock Inventory
1k+
Chip1Stop
1+ parts
$1.000
100+ parts
$0.685
1k+ parts
$0.633
10k+ parts
-
Farnell
$1.120
$0.777
$0.411
$0.405
DigiKey
$1.250
$0.724
$0.640
Mouser Electronics
$1.260
$0.727
$0.666
$0.565
Newark
$1.300
$0.854
$0.659
$0.517
Element14
$1.940
Future Electronics
$0.515
Arrow
$0.472
RS (Exports)
$0.964
Verical
$0.668
Nova Conductors
$1.094
IBS Electronics
$0.589
Vyrian
NAC Semi
$1.050
Sensible Micro Corp
Chip Stock
Rutronik
Micros
$1.089
$1.065
ComSIT Distribution GmbH
Continental Prestige Electronics
$0.914
$0.896
Argo Parts USA
Component Stockers USA
$0.920
$0.510
$0.470
Bastille Electronics
$1.039
$0.987
$0.974
Vigor
$1.290
Microchip USA
$3.483
Aztec Data Supply Inc.
$13.172
Advanced Electronics
$14.652
$13.333
$12.015
GreenTree Electronics
Kepictronics
Epart123
$1.700
Metaverse IC Inc.
QUARKTWIN TECHNOLOGY LTD
Perfect Parts
Authorized Procurement Solutions
iodParts Technologies Inc.
S.R.D Solutions
Line Drivers & Receivers SP3232EBEY-L/TR attributes and parameters. Explore more Line Drivers & Receivers devices from Sipex
Differential Output:
Driver No. of Bits:
Input Characteristics:
Interface IC Type:
Interface Standard:
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Minimum Out Swing:
Maximum Output Low Current:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Power Supplies (V):
Qualification:
Maximum Receive Delay:
Receiver No. of Bits:
Maximum Seated Height:
Sub-Category:
Maximum Supply Current:
Maximum Supply Voltage:
Minimum Supply Voltage:
Nominal Supply Voltage:
Surface Mount:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Width:
SP3232EBEY-L/TR Interface ICs trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
1N4148
Forward International Electronics
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Reverse Recovery Time: .004 us; Maximum Operating Temperature: 200 Cel; No. of Phases: 1;
First Components International
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Operating Temperature: 200 Cel; Config: SINGLE; No. of Elements: 1;
LM7805CT/NOPB
National Semiconductor
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Voltage Tolerance: 5 %; Operating Temperature (TJ-Max): 125 Cel; Maximum Output Voltage-1: 5.25 V;
CRGCQ0805F10R
TE Connectivity
TE Connectivity's CRGCQ0805F10R is a 10 ohm fixed resistor with 1% tolerance and 400 ppm/°C temperature coefficient. It is a surface mount thick film resistor in an 0805 package, suitable for applications requiring precise resistance values in compact electronic circuits.
FT232RQ-REEL
FTDI
FTDI's FT232RQ-REEL is a USB bus controller with 32 terminals, operating at 3.3-5.25V. It supports data transfer rates up to 60MBps and clock frequency of 12.02MHz, suitable for RS232/RS422/RS485 interfaces in various applications like industrial automation and communication systems.
OPA2277UA/2K5
Texas Instruments
OPA2277UA/2K5 by Texas Instruments is a dual operational amplifier with low offset voltage of 100 uV and micropower consumption of 0.004 uA. Ideal for industrial applications, it offers high common mode rejection ratio of 140 dB and unity gain bandwidth of 1 MHz. With a compact rectangular package style, it is suitable for surface mount designs in various electronic systems.
Synsemi
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
SMBJ18CA
Vishay Intertechnology
Vishay Intertechnology's SMBJ18CA is a bidirectional TRANS VOLTAGE SUPPRESSOR DIODE with a max clamping voltage of 29.2 V and a breakdown voltage of 21.05 V. It is surface mountable and commonly used in transient suppression applications.
FDN5618P
Onsemi
FDN5618P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage. It features a single configuration with built-in diode, suitable for switching applications. With 10A IDM and 0.17 ohm RDS(on), it operates in the temperature range of -55 to 150 °C, making it ideal for various electronic devices.
M24308/2-1F
Cristek Interconnects
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Rows Loaded: 2; Shell Size: 1/E; Filter Feature: NO;
SS14
Microsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WT
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SSL-LXA228SRC-TR11
Lumex
SSL-LXA228SRC-TR11 by Lumex is a 1.9mm SINGLE COLOR LED with peak wavelength of 660nm and max forward current of 0.03A. Ideal for applications requiring SUPER RED light emission, such as indicator lights in electronic devices due to its clear lens and surface mounting feature.
M39029/56-351
Defense Logistics Agency
CONNECTOR ACCESSORY; MIL Conformity: YES; Contact Gender: FEMALE; Mating Contacts: M39029/58-363; Removal Tool Sources: MILITARY; Alternate Contact Sources: MILITARY;
BSS138BKW,115
NXP Semiconductors
NXP Semiconductors' BSS138BKW,115 is a N-CHANNEL FET with 60V DS breakdown voltage and 0.32A ID. Ideal for SWITCHING applications, it features a built-in diode, 1.6 ohm RDS(on), and operates in ENHANCEMENT MODE. Suitable for surface mount with GULL WING terminals, it meets AEC-Q101 standards.
2N2222A
New Jersey Semiconductor Products
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Package Shape: ROUND;
CC0603KRX7R9BB103
Yageo
Yageo CC0603KRX7R9BB103 is a 0603 SMT ceramic capacitor with capacitance of 0.01uF and rated DC voltage of 50V. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring stable capacitance across temperatures.
Sensitron Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
E8WSDC12-32.768KTR
Ecliptek
PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Frequency Tolerance: 20 ppm; Aging: 3 PPM/YEAR; Load Capacitance: 12.5 pF; Nominal Operating Frequency: .032768 MHz;
LM107H/883
LM107H/883 by Texas Instruments is a MIL-STD-883 compliant operational amplifier with 3000uV max input offset voltage, 80dB common mode reject ratio, and 250kHz unity gain bandwidth. Ideal for military applications due to its -55 to 125 °C operating temperature range and robust metal package body material.
SN75LBC176DRG4
SN75LBC176DRG4 by Texas Instruments is a Line Driver & Receiver with 5V supply voltage, 25ns transmit delay, and 33ns receive delay. Ideal for EIA-485-A, TIA-485-A, ISO 8482 interfaces in commercial temperature grade applications requiring differential output and Schmitt trigger input characteristics.
ISL3172EIBZ-T
Renesas Electronics
ISL3172EIBZ-T by Renesas Electronics is a Line Driver & Receiver with 8 terminals, operating at -40 to 85°C. It features a differential output and supports EIA-422/EIA-485 interface standards. Ideal for industrial applications requiring BICMOS technology and a supply voltage range of 3V to 3.6V.
MAX3483ESA+
Maxim Integrated
LINE TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
HI-8585PSI
Holt Integrated Circuits
HI-8585PSI by Holt Integrated Circuits is a CMOS line driver with ARINC 429 interface. It operates at -40 to 85 °C, supports +-12/+-15 V supplies, and has 8 terminals in a small outline package. Ideal for industrial applications requiring standard input characteristics and zero receive delay.
LTC2872IUHF#PBF
Analog Devices
LTC2872IUHF#PBF by Analog Devices is a Line Driver & Receiver with 4 functions, operating at -40 to 85°C. It features EIA-232 and EIA-422 interface standards, SCHMITT TRIGGER input characteristics, and a CMOS technology. Ideal for industrial applications requiring reliable communication over short distances.
MAX3232EEAE-T
MAX3232EEAE-T by Maxim Integrated is a Line Driver & Receiver with 16 terminals, operating at 3-5.5V. It features dual functions, BICMOS technology, and supports EIA-232, TIA-232 interfaces. Ideal for industrial applications requiring reliable data transmission in harsh environments.
ST485EBDR
STMicroelectronics
ST485EBDR by STMicroelectronics is a Line Driver & Receiver with 5V supply, 45ns max transmit delay, and EIA-422/EIA-485 interface. It's used in industrial applications for differential signaling, offering dual terminal position and small outline package style.
ADM2483BRWZ-REEL
ADM2483BRWZ-REEL by Analog Devices is a Line Driver & Receiver with 16 terminals, operating voltage range of 2.7V to 5.5V, and max transmit delay of 620ns. Ideal for industrial applications requiring EIA-485-A, TIA-485-A, or ISO 8482E interface standards in harsh environments due to its wide temperature range from -40°C to 85°C.
SP3485CN-L
Sipex
LINE TRANSCEIVER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
SN65LVDS2DBVT
SN65LVDS2DBVT by Texas Instruments is a line driver with 3.6V max supply voltage, 3.1ns max transmit delay, and 85°C max operating temp. Ideal for industrial applications requiring EIA-644-A/TIA-644-A interface standard compliance and differential Schmitt trigger input characteristics.
P82B96PW
P82B96PW by Texas Instruments is a Line Transceiver with 2 functions, operating at temperatures from -40 to 85°C. It has a max supply voltage of 15V and requires only 2mA of current. This industrial-grade device is ideal for applications requiring standard input characteristics in surface-mount designs.
MAX232AEWE
Rochester Electronics
LINE TRANSCEIVER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR;
SP3232EEY-L
Maxlinear
LTC1480IS8#PBF
LTC1480IS8#PBF by Analog Devices is an 8-terminal line driver with a max supply voltage of 3.6V and operating temperature range of -40 to 85°C. It features differential outputs, EIA-422/EIA-485 interface standards, and a small outline package style. Ideal for industrial applications requiring reliable communication over long distances.
ICL3221EIVZ-T7A
Integrated Device Technology
MAX3295AUT-T
MAX3295AUT-T by Analog Devices is a line driver & receiver with a max supply voltage of 3.465V and a max transmit delay of 25ns. It is commonly used in automotive applications due to its temperature grade and moisture sensitivity level.
ADM2486BRWZ-REEL
ADM2486BRWZ-REEL by Analog Devices is a Line Driver & Receiver with 16 terminals, operating voltage range of 2.7V to 5.5V, and max transmit delay of 55ns. Ideal for industrial applications requiring EIA-485-A, TIA-485-A, or ISO 8482E interface standards in harsh environments with temperatures ranging from -40°C to 85°C.
TCA9617BDGKR
TCA9617BDGKR by Texas Instruments is a Line Transceiver with 8 terminals, operating at -40 to 85°C. It has a max supply voltage of 5.5V and transmit delay of 250ns. Ideal for industrial applications requiring true output polarity and standard input characteristics in a small outline package.
MAX3483ESA
MAX3483ESA by Maxim Integrated is a CMOS Line Transceiver with EIA-422 and EIA-485 interface standards. It operates at 3.3V, has 8 terminals, and offers differential outputs. With a max transmit delay of 1400ns, it's ideal for industrial applications requiring high-speed data transmission in harsh environments.
P82B96DGKRG4
P82B96DGKRG4 by Texas Instruments is a Line Transceiver with 2 functions, operating at temperatures from -40 to 85°C. It has a max supply voltage of 15V and min of 2V, suitable for industrial applications requiring standard input characteristics. This small outline package with dual terminals and Gull Wing form factor is ideal for space-constrained designs.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
SP3232EEY-L/TR
Exar
Exar's SP3232EEY-L/TR is a Line Driver & Receiver with 16 terminals, operating at -40 to 85°C. It supports EIA-232 interface standard, with 3/5V power supplies and Schmitt trigger input characteristics. Ideal for industrial applications requiring reliable data transmission in compact spaces.
SP3232EEN-L/TR
LINE TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR;
Exar's SP3232EEN-L/TR is a 16-terminal line driver/receiver with 3-5V power supplies. It operates in industrial temperatures (-40 to 85°C) and supports EIA-232, V.24 interfaces. With dual terminals and Schmitt trigger input characteristics, it's ideal for data communication applications.
SP3232EEN-L
SP3232EBCN-L/TR
SP3232EBEY-L/TR
SP3232EBEN-L/TR
Exar's SP3232EBEN-L/TR is a 16-terminal line driver/receiver with 3.3/5V power supplies, operating from -40 to 85°C. It features EIA-232-F, TIA-232-F, V.24, and V.28 interface standards for industrial applications requiring a max output low current of 1.6Amp and min out swing of 10V.
SP3232EBEY/TR
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved