Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Diodes Inc. AP2186SG-13 is a peripheral driver with 8 terminals, operating voltage range of 2.7V to 5.5V, and built-in protections against over current and thermal issues. It has a max output current of 1.5A and is ideal for industrial applications requiring buffer or inverter based peripheral drivers in compact spaces due to its small outline package style.
Median Price
$1.370
Lifecycle Status
Suppliers In-Stock
13
In-Stock Inventory
1k+
Farnell
1+ parts
$1.130
100+ parts
$0.656
1k+ parts
$0.497
10k+ parts
$0.486
DigiKey
$0.796
$0.707
-
Mouser Electronics
$0.797
$0.698
$0.660
Newark
$1.410
$0.821
Element14
$1.930
$1.060
$0.860
$0.826
Verical
$0.578
Avnet
Nova Conductors
$0.735
Chip Stock
Vyrian
VNN
NAC Semi
Prism Electronics
Ampacity Inc.
$0.491
Argo Parts USA
Netroflash
Continental Prestige Electronics
$1.590
$0.920
$0.638
$0.601
Perfect Parts
QUARKTWIN TECHNOLOGY LTD
Lixinc
Authorized Procurement Solutions
Eastek
$0.380
GreenTree Electronics
Provides durability and protection for internal components
Enables easy installation onto circuit boards
Allows for flexibility in power input
Enhances safety and reliability of the device
Sufficient connectivity options for various applications
Can handle high current loads
Ensures consistent performance under load
Provides versatility in interfacing with different components
Peripheral Drivers AP2186SG-13 attributes and parameters. Explore more Peripheral Drivers devices from Diodes Incorporated
Built-in Protections:
Driver No. of Bits:
Interface IC Type:
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Output Current Flow Direction:
Maximum Output Current:
Nominal Output Peak Current Limit:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Power Supplies (V):
Qualification:
Maximum Seated Height:
Sub-Category:
Maximum Supply Voltage:
Minimum Supply Voltage:
Nominal Supply Voltage:
Surface Mount:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Width:
AP2186SG-13 Interface ICs trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Design/Specification - Bond Wire 13/Jan/2012
PCN Assembly/Origin - Mult Dev A/T Site 16/Apr/2021
Diodes Incorporated is an international leader in the design and production of high-grade application specific standard products utilized in a wide variety of industries. The company has developed cutting-edge technology that enhances the performance and reliability of components for consumer, industrial, automotive and communication applications. Established in 1959, Diodes Incorporated has been providing superior services to its customers by creating innovative solutions from their world-class manufacturing centers located around the world. Their commitment to delivering quality products extends to their selection of materials which are carefully chosen to meet the demand of both commercial and military requirements.
Chairman and CEO
Keh-Shew Lu
CFO
Brett R. Whitmire
Lead Director
Angie Chen Button
Fab 1
Fabrication
Fab Initiation
1987
China
Shanghai
Wafer Capacity
40,000
Zizhu Fab 1
2013
18,500
G Fab
2008
UK
Greenock
8,000
Keelung Fab
1990
Taiwan
Keelung
58,000
Wuxi Fab
2004
Wuxi
190,000
Shanghai Fab
1993
110,000
1970
22,000
Hsinchu Fab
1998
Hsinchu
38,000
Fab 2
2003
20,000
SPFAB
1995
USA
South Portland
17,000
N/A
1982
Oldham
4,000
2N2222A
Transistor & Electronic
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
2N7002
Sinyork
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Operating Temperature: 85 Cel; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Operating Mode: ENHANCEMENT MODE;
SMBJ18CA
Bytesonic Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
ABS25-32.768KHZ-1-T
Abracon
Abracon's ABS25-32.768KHZ-1-T crystal oscillator offers 10 ppm frequency tolerance, 126% stability, and 50000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal operating frequency, such as IoT devices and precision timing systems.
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
LM78L05ACMX/NOPB
National Semiconductor
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 8; Package Code: SOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;
CC0603KRX7R9BB103
Yageo
Yageo CC0603KRX7R9BB103 is a 0603 SMT ceramic capacitor with capacitance of 0.01uF and rated DC voltage of 50V. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring stable capacitance across temperatures.
BAV99
Continental Device India
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WT-7
Diodes Incorporated
1N4148WT-7 by Diodes Inc. is a fast recovery rectifier diode with a max reverse recovery time of 0.004 us and a max forward voltage of 1.25 V. It has a package style of small outline, making it suitable for surface mount applications where high-speed switching is required at temperatures ranging from -65 to 150 °C.
LL4148
Excel (Suzhou) Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Itt Semiconductor
M39029/56351
Souriau
CONNECTOR ACCESSORY; MIL Conformity: YES; Contact Gender: FEMALE; Insertion Tools: M81969/14-10; Tool Settings: M22520/2-10; DIN Conformity: NO;
Loras Industries
ERJ3GEY0R00V
Panasonic
ERJ3GEY0R00V by Panasonic is a SMT fixed resistor with 0 ohm resistance, suitable for jumper applications. It features a metal glaze/thick film technology, rated for temperatures b/w -55 to 155 °C. With a compact rectangular construction and matte tin over nickel terminal finish, it is ideal for surface mount installations in various electronic devices.
FDN306P
Onsemi
FDN306P by Onsemi is a P-CHANNEL FET with 12V DS Breakdown Voltage, ideal for SWITCHING applications. It features SINGLE configuration with BUILT-IN DIODE and GULL WING terminals. Operating in ENHANCEMENT MODE, it has a max ID of 2.6A and 0.04 ohm RDS(on), suitable for small outline packages at temperatures ranging from -55 to 150°C.
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Package Style (Meter): SMALL OUTLINE; Terminal Position: DUAL;
Bkc Semiconductors
Multicomp Pro
SPC TECHNOLOGY/ MULTICOMP
AUIR2085STR
Infineon Technologies
AUIR2085STR by Infineon is a CMOS peripheral driver with 8 terminals, operating voltage of 10-15V. It offers built-in protections against transient, over current, and under voltage. Ideal for automotive applications due to AEC-Q100 screening and small outline package style.
TPS2H000BQPWPRQ1
Texas Instruments
TPS2H000BQPWPRQ1 by Texas Instruments is a Peripheral Driver with 2 functions, operating at -40 to 125 °C. It has built-in protections for transient, over current, thermal & under voltage. Ideal for automotive applications due to AEC-Q100 screening & high side driver feature.
LMD18200T
LMD18200T by Texas Instruments is a peripheral driver with a max supply voltage of 55V and built-in protections for transient, thermal, and under voltage. It has a max output current of 6A and operates in automotive temperature grades. This HB-based peripheral driver with PWM is ideal for applications requiring high current sourcing and sinking capabilities.
IPS2050HQ
STMicroelectronics
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; JESD-609 Code: e4; Moisture Sensitivity Level (MSL): 3; Peak Reflow Temperature (C): 260; Terminal Finish: NICKEL PALLADIUM GOLD;
BTS3205GXUMA1
BTS3205GXUMA1 by Infineon Technologies is a peripheral driver with built-in protections for transient, over voltage, and thermal issues. It operates at a nominal voltage of 12V with a turn-on time of 38µs and turn-off time of 45µs. This small outline package is ideal for applications requiring sink output current flow direction.
BSP452E6327T
BSP452E6327T by Infineon Technologies is a Peripheral Driver with 4 terminals, offering built-in protections against various faults. It operates at supply voltages ranging from 5V to 34V and has a nominal output peak current limit of 1.7A. This small outline package driver is ideal for applications requiring buffer or inverter-based interface ICs.
BTS4141NHUMA1
BTS4141NHUMA1 by Infineon is a peripheral driver with 4 terminals, operating voltage range of 12-45V, and built-in protections. Widely used in automotive applications due to its small outline package style and sink output current flow direction. Turn-on time is 100 us and turn-off time is 150 us for efficient performance.
UCC23513DWY
UCC23513DWY by Texas Instruments is a small outline peripheral driver with built-in transient and under voltage protections. It operates in industrial temperature range (-40 to 115°C) and can handle up to 33V supply voltage, providing a max output current of 4.5A. Ideal for applications requiring source and sink current flow direction control, such as buffer or inverter-based systems.
BSP75NTA
Zetex Plc
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 4; Package Code: SOP; Package Shape: RECTANGULAR; Turn-off Time: 20 us;
TPS27SA08CPWPR
TPS27SA08CPWPR by Texas Instruments is a peripheral driver with a max supply voltage of 36V and built-in protections for transient, over current, thermal, and under voltage. It has a high side driver feature, output polarity is true, and can handle a max output current of 10A. This automotive-grade IC is ideal for applications requiring reliable control of high-side loads in harsh environments.
ISO1H811GAUMA1
ISO1H811GAUMA1 by Infineon Technologies is a peripheral driver with built-in protections for transient, over current, and over voltage. It operates at a max supply voltage of 5.5V and has a max output current of 0.625A. This interface IC type is ideal for applications requiring buffer or inverter based peripheral drivers in compact designs.
BTM7740GXUMA1
Infineon's BTM7740GXUMA1 is a 28-terminal peripheral driver with a peak current limit of 15A. It features Gull Wing terminals, suitable for surface mount applications. This buffer/inverter-based driver supports bidirectional current flow and is ideal for various electronic systems requiring high output currents.
FPF2702MX
Fairchild Semiconductor
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
VNI4140KTR-32
VNI4140KTR-32 by STMicroelectronics is a 24V peripheral driver with 4 bits, suitable for BUFFER OR INVERTER BASED applications. It features a small outline package with dual terminals and matte tin finish. The device has a peak reflow temperature of 260°C and moisture sensitivity level of MSL3.
VN7140ASTR-E
STMicroelectronics' VN7140ASTR-E is a peripheral driver with 8 terminals, offering built-in protections against various faults. It operates at supply voltages ranging from 4V to 28V and has a turn-on time of 120 us. Ideal for applications requiring sink output current flow direction and buffer or inverter based interface IC type.
SZNUD3160DMT1G
SZNUD3160DMT1G by Onsemi is a 6-terminal peripheral driver with AEC-Q101 screening. It features transient protection, operates b/w -40 to 125 °C, and has a small outline package style. Ideal for automotive applications requiring sink output current flow direction.
MIC5842YN
Micrel
SIPO BASED PERIPHERAL DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 18; Package Code: DIP; Package Shape: RECTANGULAR;
SN6507DGQR
SN6507DGQR by Texas Instruments is a peripheral driver with a max supply voltage of 36V and nominal output peak current limit of 1.3A. It operates b/w -55 to 125°C, making it suitable for various industrial applications requiring buffer or inverter-based interface ICs in compact designs.
TPS22965QWDSGTQ1
TPS22965QWDSGTQ1 by Texas Instruments is a small outline, heat sink package with built-in transient protection. It operates b/w -40 to 125 °C and supports a supply voltage range of 2.5V to 5.5V, making it ideal for automotive applications requiring source and sink current flow control.
FSFR2100
HALF BRIDGE BASED PERIPHERAL DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 9; Package Code: ZIP; Package Shape: RECTANGULAR;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
AP2171WG-7
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 5; Package Code: LSSOP; Package Shape: RECTANGULAR;
AP2151AW-7
AP2156SG-13
AP2156SG-13 by Diodes Inc. is a peripheral driver with 8 terminals, offering a max output current of 0.5A and built-in protections against overcurrent and thermal issues. It operates within an industrial temperature range from -40 to 85°C, making it suitable for various applications requiring sink-type drivers in compact designs.
AP2196SG-13
AP2196SG-13 by Diodes Inc. is a peripheral driver with 8 terminals, operating voltage of 2.7-5.5V, and max output current of 1.5A. It offers overcurrent and thermal protection, ideal for industrial applications requiring buffer or inverter-based peripheral drivers in compact designs with surface mount capability.
AP2151AFM-7
AP2151AFM-7 by Diodes Inc. is a peripheral driver with 6 terminals, operating voltage range of 2.7V to 5.5V, and built-in protections against transient, over current, thermal issues. It has a small outline package style suitable for industrial applications requiring source output current flow direction in a compact form factor.
AP21510FM-7
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 6; Package Code: SON; Package Shape: UNSPECIFIED;
AP2152SG-13
AP2181WG-7
AP2181WG-7 by Diodes Inc. is a 5V peripheral driver with built-in protections for transient, over current, and under voltage. It has a max output current of 1.5A and nominal voltage of 5V. Ideal for interface IC applications requiring sink output current flow direction in compact designs.
AP2171FMG-7
AP2171FMG-7 by Diodes Inc. is a peripheral driver with max supply voltage of 5.5V, built-in protections for transient, over current, thermal & under voltage. It operates in industrial temperature range (-40 to 85°C) and has a max output current of 1A. Ideal for applications requiring buffer or inverter based peripheral drivers with sink output current flow direction.
AP2186MPG-13
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: HTSSOP; Package Shape: RECTANGULAR;
AP2191AW-7
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Finish: MATTE TIN; JESD-609 Code: e3; Peak Reflow Temperature (C): 260;
AP2191SG-13
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
AP2161WG-7
AP2171MPG-13
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: HTSSOP; Package Shape: SQUARE;
AP2192MPG-13
AP2171AW-7
AP2171AW-7 by Diodes Inc. is a 5V peripheral driver with built-in protections for transient, over current, thermal, and under voltage. It has a max supply voltage of 5.5V and nominal output peak current limit of 1A. Ideal for industrial applications requiring a compact design and source output current flow direction.
AP2145MPG-13
AP2141AS-13
AP2145SG-13
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved