Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
FEED THROUGH CAPACITOR; Rated Current: 5 A; JESD-609 Code: e4; Height: 2.79 mm; Terminal Finish: GOLD; Diameter (mm): 4.01;
Median Price
$54.270
Lifecycle Status
Suppliers In-Stock
3
In-Stock Inventory
1k+
TTI
1+ parts
$32.560
100+ parts
$26.610
1k+ parts
$19.940
10k+ parts
-
Master Electronics
$28.010
$26.050
Verical
$68.093
$33.103
Perfect Parts
Data Line Filters 4300-014LF attributes and parameters. Explore more Data Line Filters devices from Cts
Additional Features:
Capacitance:
Diameter (mm):
Filter Type:
Height:
Maximum Insertion Loss:
JESD-609 Code:
Mounting Type:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Dimensions:
Rated Current:
Rated Voltage:
Terminal Finish:
4300-014LF Filters trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8504.50.80.00
SB
8504.50.00.00
Founded in 1896, CTS Corporation (NYSE: CTS) is a leading designer and manufacturer of products that Sense, Connect, and Move. The company manufactures sensors, actuators, and electronic components in North America, Europe, and Asia. CTS provides solutions to OEMs in the aerospace, communications, defense, industrial, information technology, medical, and transportation markets. CTS focuses on providing advanced technology, exceptional customer service and superior value to industry partners throughout the globe. CTS aims to be at the forefront of technology, delivering innovative sensing, connectivity and motion solutions for the creation and advancement of products and services around the world.
SMBJ18CA
Jgd Semiconductors
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Polarity: BIDIRECTIONAL; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.2 V; Maximum Repetitive Peak Reverse Voltage: 18 V;
LM317T
Bay Linear
Other Regulators; No. of Terminals: 3; No. of Outputs: 1; Surface Mount: NO; Maximum Load Regulation (%): 1.5 %; Operating Temperature (TJ-Min): 0 Cel;
CRCW040210K0FKED
Vishay Intertechnology
Vishay Intertechnology's CRCW040210K0FKED is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.063 W power dissipation. Ideal for surface mount applications in electronics due to its compact SMT package style and high operating temperature range of -55 to 155 °C.
SS14
Rfe International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99
First Components International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
M39029/56-351
Glenair
CONNECTOR ACCESSORY; Associated Backshell Military - Specifications: MIL-DTL-38999; Material: COPPER ALLOY; Associated Military - Specifications: MIL-DTL-38999; Contact Gender: FEMALE; DIN Conformity: NO;
1552200168
Molex
WIRE AND CABLE;
350766-1
TE Connectivity
TE Connectivity 350766-1 is a rectangular power connector with 0.25" mating contact pitch, rated for 600V and operating temperatures from -55 to 105°C. It has a durable design with POLYAMIDE insulator material, suitable for commercial applications requiring secure crimp termination in cable mounting setups.
SN65HVD234DR
Texas Instruments
SN65HVD234DR by Texas Instruments is an 8-terminal interface circuit with a data rate of 1 Mbps. Operating temperature ranges from -40 to 125 °C, making it ideal for automotive applications. With a supply voltage of 3.3 V and low current draw of 6 mA, it's suitable for network interfaces in compact designs.
Carlisle Interconnect Technologies
CONNECTOR ACCESSORY; MIL Conformity: YES; Contact Type: CRIMP; Removal Tools: M81969/8-06, M81969/14-02; IEC Conformity: NO; Contact Gender: FEMALE;
BSS138
National Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Maximum Feedback Capacitance (Crss): 10 pF; JEDEC-95 Code: TO-236AB;
2N7002
Zetex Plc
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Peak Reflow Temperature (C): 260; Package Shape: RECTANGULAR;
2N2222A
Baneasa S A
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .8 A; Qualification: Not Qualified;
Transistor & Electronic
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Siemens
Plessey Semiconductors Discrete Components Div
Other Transistors;
1N4148WS
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Electronic Transistors
Surge Components
Taitron Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3.5 ohm; Maximum Drain Current (ID): .2 A; Peak Reflow Temperature (C): NOT SPECIFIED;
RB6122-16-1M0
Schaffner Holding Ag
RB6122-16-1M0 by Schaffner Holding Ag is a UL-approved data line filter with 1000uH inductance, 16A rated current, and 1000V rated voltage. It operates b/w -40°C to 125°C and is ideal for applications requiring noise suppression in data lines.
MPZ1608S300ATAH0
TDK
TDK's MPZ1608S300ATAH0 is a 0603 chip bead filter with 2 terminals. It offers a max operating temp of 125°C, DC resistance of 0.01 ohm, and output impedance of 30 ohm. Ideal for data line filtering applications due to its compact size and high rated current of 5A.
NFM18PC105R0J3D
Murata Manufacturing
Murata Manufacturing's NFM18PC105R0J3D is a FEED THROUGH CAPACITOR with 500 Mohm Min Insulation Resistance, 6.3V Rated Voltage, and 1000000uF Capacitance. Ideal for data line filtering applications due to its compact L1.6XB0.8XH0.8 (mm) size and surface mounting type.
NFM3DCC102R1H3L
Murata Manufacturing's NFM3DCC102R1H3L is a data line filter with 1000 Mohm insulation resistance, 50V rated voltage, and FEED THROUGH CAPACITOR type. Ideal for applications requiring surface mount filters with dimensions of L3.2XB1.25XH0.7mm such as electronic devices or communication equipment.
DLW21SN371SQ2L
Murata Manufacturing's DLW21SN371SQ2L is a data line filter with 2 functions, rated at 50V and 0.28A. It offers a min insulation resistance of 10 Mohm, operating b/w -40 to 85 °C. Ideal for applications requiring high impedance filtering in compact spaces.
M-FIAM9HN1
Vicor
Vicor's M-FIAM9HN1 is a 36V, 18A data line filter module with 9 terminals. Operating from -40 to 100°C, it offers TIN LEAD finish and panel mount installation. Ideal for applications requiring high current filtering in compact spaces.
B82790C0113N201
TDK B82790C0113N201 is an 80V data line filter with 11uH inductance and 0.08 ohm DC resistance. It has UL and IEC approvals, suitable for applications requiring a 50 OHM output impedance in surface mount configurations.
7427927141
Wuerth Elektronik & Kg
Wurth Elektronik 7427927141 is a FERRITE CHIP data line filter with 1 function and 2 terminals. It has a max operating temperature of 125°C and min of -55°C. With dimensions of L1.0XB0.5XH0.5 (mm), it is ideal for surface mount applications requiring an output impedance of 470 OHM at a rated current of 0.25 A.
BLM21PG600SN1J
Murata Manufacturing's BLM21PG600SN1J is an 0805 chip bead filter with 2 terminals, operating from -55 to 125°C. With a width of 1.25mm and length of 2mm, it offers a max DC resistance of 0.025 ohm and output impedance of 60 ohm at frequencies up to 100 MHz. Ideal for data line filtering applications, this ferrite chip is rated for a current of 3A and features tin terminal finish in surface mount packaging.
BK2125HM102-T
Taiyo Yuden
BK2125HM102-T by Taiyo Yuden is a chip bead data line filter with 400V rated voltage, -55 to 125°C operating temperature range, and 1000 ohm output impedance. Ideal for surface mount applications in electronic devices requiring noise suppression at frequencies up to 100MHz.
4400-099LF
Cts
4400-099LF by Cts is a Data Line Filter with 20000 Mohm Min Insulation Resistance, 50 V Rated Voltage, and FEED THROUGH CAPACITOR filter type. It operates b/w -55 to 125 °C, has a Max Insertion Loss of 70 dB, and a Capacitance of 50000 uF. Ideal for panel mounting applications requiring up to 10 A rated current.
BKP2125HS600-T
Taiyo Yuden's BKP2125HS600-T is an 0805 multilayer chip data line filter with 2 terminals. Featuring a ferrite chip construction, it offers a max operating temp of 85°C and min of -55°C. Ideal for applications requiring a 60Ω output impedance at frequencies ranging from 100 MHz, this surface mount filter has dimensions of L2.0xB1.25xH0.85 (mm) and can handle up to 3A rated current.
P0429NLT
Pulse Electronics
Pulse Electronics P0429NLT is a data line filter with 2 functions, AEC-Q200 screening level. It has inductance of 810uH, rated current of 9.7A, and max operating temp of 120°C. Ideal for automotive applications due to its surface mounting type and compact dimensions (L30.99xB25.4xH12.7 mm).
744235510
Wurth Elektronik 744235510 is a Data Line Filter with 2 functions, rated at 60V. With inductance of 51uH and max DC resistance of 1 ohm, it operates b/w -40 to 125 °C. Ideal for applications requiring a surface mount filter with output impedance of 3000 OHM.
NFM21PC224R1C3D
Murata Manufacturing's NFM21PC224R1C3D is a data line filter with 16V rated voltage, 220000uF capacitance, and 2A rated current. It features a feed through capacitor design for noise suppression in electronic circuits. Ideal for surface mount applications where high insulation resistance and temperature tolerance are required.
P0422NLT
Pulse Electronics P0422NLT is a data line filter with 2 functions, AEC-Q200 screening level, and inductance of 770uH. It operates b/w -40°C to 120°C, has a max DC resistance of 0.04 ohm, and rated current of 4.7A. Ideal for surface mount applications in automotive electronics due to its compact size (L19.56xB17.02xH9.91 mm).
744220203
Wurth Elektronik 744220203 is a Data Line Filter with 2 functions and rated voltage of 80V. It has inductance of 20000uH, max operating temp of 125°C, and DC resistance of 2.6 ohm. Ideal for applications requiring noise suppression in data lines with approval from IEC standards.
PBY201209T-601Y-N
FERRITE CHIP; Construction: Chip Bead; Maximum DC Resistance: .1 ohm; Maximum Frequency: 100 MHz; Material: Ferrite; Rated Current: 2 A;
BNX016-01
Murata Manufacturing's BNX016-01 is a 3-function data line filter with 40 dB max insertion loss, rated for 25V and 15A. With dimensions of L12.0xB11.0xH8.0 mm, it operates b/w -40 to 125 °C and has an output impedance of 50 ohm. Ideal for applications requiring noise suppression in data lines.
EMI4192MTTAG
Onsemi
EMI4192MTTAG by Onsemi is a Data Line Filter with 2 functions and 10 terminals. It has a max operating temperature of 85°C, DC resistance of 5 ohm, and output impedance of 50 ohm. Ideal for applications requiring surface mount filters with a capacitance of 1.3 uF in plastic/epoxy packages.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved