Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SINGLE PHASE EMI FILTER; Rated Current: 20 A; High Pot: 2500 V; Maximum Operating Temperature: 85 Cel; Rated Voltage: 250 V; Maximum Leakage Current: .25 mA;
Median Price
-
Lifecycle Status
Suppliers In-Stock
0
In-Stock Inventory
< 1k
EMI Mains Filters NBC-20-102-D attributes and parameters. Explore more EMI Mains Filters devices from Cosel
Approvals (V):
Filter Type:
Height:
High Pot:
Maximum Leakage Current:
Length:
Manufacturer Series:
Mounting Type:
Operating Frequency (Hz):
Maximum Operating Temperature:
Minimum Operating Temperature:
Dimensions:
Rated Current:
Rated Voltage:
Manufacture and sale of electronic equipment and electrical equipment. Main product - DC stabilized power supply (switching power supply, etc.)
1N4148
Shandong Yiguang Electronic Joint Stock
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
INA826AIDGKR
Texas Instruments
INA826AIDGKR by Texas Instruments is an instrumentation amplifier with 150uV max input offset voltage, 0.095uA max average bias current, and 1MHz nominal bandwidth. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and high common mode rejection ratio of 120dB.
SMBJ18CA
Eic Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N5819HW-7-F
Diodes Incorporated
1N5819HW-7-F by Diodes Inc. is a Schottky rectifier diode with 40V reverse test voltage, 1A output current, and 0.75V forward voltage. It's a surface mount device in a small outline package ideal for efficiency applications at temperatures ranging from -65 to 125°C.
2N2222A
Microchip Technology
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Minimum Operating Temperature: -65 Cel; Terminal Position: BOTTOM;
LM2675M-ADJ/NOPB
LM2675M-ADJ/NOPB by Texas Instruments is a voltage-mode switching regulator with 1A output current, 37V max output voltage, and 260kHz max switching frequency. Ideal for automotive applications due to its -40°C to 125°C operating temperature range and compact small outline package design.
2N7002
Onsemi
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Terminal Finish: Matte Tin (Sn) - annealed; Transistor Element Material: SILICON;
Uniohm
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Terminal Form: GULL WING; JESD-30 Code: R-PDSO-G3;
M39029/58-360
TE Connectivity
TE Connectivity's M39029/58-360 is a CRIMP terminal backshell for 22-28 AWG wires, rated at 5A. Ideal for male contacts in Mil-Spec applications, it offers a cross-section area of 0.34 mm2 and ensures secure connections in demanding environments.
BAV99
Kec
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138
Zetex Plc
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Style (Meter): SMALL OUTLINE; Maximum Operating Temperature: 150 Cel;
C0805C104K5RACTU
KEMET Corporation
KEMET C0805C104K5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring compact size and reliable performance.
SBAV99LT1G
SBAV99LT1G by Onsemi is a rectifier diode with a max repetitive peak reverse voltage of 100V. It has a small outline package style and a fast max reverse recovery time of 0.006 us. It is commonly used in applications requiring low power dissipation and high operating temperatures.
Philips Semiconductors
RECTIFIER DIODE; Surface Mount: YES; Maximum Output Current: .1 A; Peak Reflow Temperature (C): 260; Terminal Finish: MATTE TIN; Maximum Reverse Recovery Time: .006 us;
MMBT2907ALT1G
MMBT2907ALT1G by Onsemi is a PNP BJT transistor with 100 min hFE, 60V VCEO, and 200MHz fT. Ideal for switching applications, it has a small outline package with Gull Wing terminals and can handle up to 0.6A of collector current.
1N4148WS
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM555CMX
LM555CMX by Texas Instruments is an Analog Waveform Generation IC with 8 terminals. It operates at a nominal voltage of 5V and supports power supplies ranging from 5V to 15V. This versatile IC, housed in a small outline package, is commonly used for pulse and rectangular waveform generation in commercial temperature environments.
SPC TECHNOLOGY/ MULTICOMP
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Itt Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
SN13-500
Tokin
SINGLE PHASE EMI FILTER; Rated Current: 6 A; Height: 18 mm; Packing Method: TRAY; Diameter (mm): 31; Mounting Type: THROUGH HOLE MOUNT;
SS26V-070510
SINGLE PHASE EMI FILTER; Rated Current: .7 A; Operating Frequency (Hz): 50Hz; Minimum Operating Temperature: -25 Cel; Additional Features: INDUCTANCE 51 MILLI HENRY; Terminal Finish: NOT SPECIFIED;
CMS1-5-R
Eaton Corporation
Eaton Corporation's CMS1-5-R EMI Mains Filter is a single-phase filter with 4 terminals, UL approval, and rated current of 3.6A. With dimensions of L9.4xB7.2xH2.6 mm, it operates b/w -40°C to 160°C and is ideal for surface mount applications in electronic devices.
SCR25B-105-1R3A035JH
KEMET Corporation's SCR25B-105-1R3A035JH is a UL approved EMI mains filter with 500V rated voltage and 10.5A current. It offers 100 Mohm insulation resistance, operates b/w -25°C to 120°C, and is a single-phase filter suitable for through-hole mounting applications.
PLA10AN1030R7R2B
Murata Manufacturing
Murata Manufacturing's PLA10AN1030R7R2B is a SINGLE PHASE EMI FILTER with 100 Mohm Min. Insulation Resistance, 300 V Rated Voltage, and 0.7 A Rated Current. It operates b/w -25 to 120 °C and is ideal for EMI mains filtering applications due to its Through Hole Mounting type and compact dimensions of L18.0xB16.0xH17.5 mm.
FIL-1S-1-20A-230AC-PT
Phoenix Contact
SINGLE PHASE EMI FILTER; Rated Current: 20 A; Width (mm): 45; Height: 99 mm; Approvals (V): IEC; UL; VDE; Length: 99.5 mm;
B82722A2301N001
TDK
The TDK B82722A2301N001 is a UL, EN, IEC, VDE approved EMI mains filter with 250V rated voltage and 0.3A rated current. It features single-phase filtering, 50/60Hz operating frequency, and tin over nickel terminal finish. Ideal for applications requiring effective electromagnetic interference suppression in electronic devices.
SCF19XV-150-1R3A006JH
SINGLE PHASE EMI FILTER;
FN2030-10-06
Schaffner Holding Ag
FN2030-10-06 by Schaffner Holding Ag is a SINGLE PHASE EMI FILTER with approvals from UL, CSA, and ENEC-14. It has a rated voltage of 250V, rated current of 11.2A, and high pot of 1100V. This chassis mount filter operates b/w -25°C to 100°C and is ideal for applications requiring effective electromagnetic interference mains filtering.
7448040707
Wuerth Elektronik & Kg
Wurth Elektronik 7448040707 is a SINGLE PHASE EMI FILTER with 250V rated voltage and 7A rated current. With dimensions of L28.0XB19.0XH28.0 (mm), it is ideal for EMI mains filtering applications in electronics, ensuring efficient operation at temperatures ranging from -40 to 125 °C.
SN8D-300JB
KEMET Corporation's SN8D-300JB is a UL-approved SINGLE PHASE EMI FILTER with 2A rated current. Operating temperature ranges from -25°C to 105°C, making it suitable for various applications requiring EMI mains filtering. With dimensions of 15.5mm x 18.5mm x 18mm, it is designed for through-hole mounting in electronic devices.
250APH12P
The TE Connectivity 250APH12P is a UL-approved EMI mains filter with a rated voltage of 690V and rated current of 250A. This three-phase filter operates at temperatures from -10°C to 50°C, with high pot up to 2640V and max leakage current of 330mA. Ideal for panel mounting applications, it measures 160mm in width, 250mm in length, and stands at a height of 125mm.
10VW1
Corcom
SINGLE PHASE EMI FILTER; Maximum Frequency: 10 MHz; Rated Current: 10 A; Maximum Leakage Current: .5 mA; Height: 38.9 mm; Insertion Loss At Maximum Frequency: 65 dB;
SSHB10H-R04760
KEMET Corporation's SSHB10H-R04760 is a UL-approved EMI mains filter with 250V rated voltage and 0.4A rated current. It offers 100 Mohm min insulation resistance, operates b/w -25°C to 120°C, and has a high pot of 500V. Ideal for single-phase EMI filtering applications due to its compact dimensions of 17mm x 22mm x 15.5mm.
NEF1-10-2788977
SINGLE PHASE EMI FILTER; Rated Current: 10 A; Mounting Type: PANEL MOUNT; Approvals (V): UL; IEC; VDE; Rated Voltage: 250 V; Minimum Operating Temperature: -25 Cel;
PLA10AN3030R4R2B
Murata Manufacturing's PLA10AN3030R4R2B is a SINGLE PHASE EMI FILTER with 300V rated voltage and 100 Mohm min insulation resistance. Operating b/w -25 to 120 °C, it has a 0.4A rated current and dimensions of L18.0xB16.0xH17.5 mm. Ideal for EMI mains filtering applications with through-hole mounting requirement.
FN258HVIT-100-35
Schaffner Holding Ag's FN258HVIT-100-35 is a UL, CSA, ENEC-14 approved 690V three-phase EMI filter with 110A rated current. It operates b/w -25°C to 100°C and has a high pot of 3100V. Ideal for panel mounting applications due to its compact dimensions of L350.0xB90.0xH220.0mm.
B84111A0000B120
TDK's B84111A0000B120 EMI Mains Filter, rated at 250V and 20A, features UL, CSA, and ENEC-10 approvals. With a single-phase filter type and dimensions of L50.8xB63.5xH38.1 (mm), it is ideal for panel mount applications requiring high pot up to 2700V and low leakage current of 0.5mA at an operating frequency of 50/60Hz.
SS30V-R180190
KEMET Corporation's SS30V-R180190 EMI Mains Filter is a single-phase filter with a rated voltage of 250V and max operating temperature of 120°C. With a rated current of 1.8A, it is designed for through-hole mounting applications where EMI filtering is required to ensure optimal performance and reliability in electronic systems.
FN355-10-05
Schaffner Holding Ag's FN355-10-05 EMI Mains Filter is a THREE PHASE filter with 440V rated voltage, UL, CSA, SEMKO approvals. It operates at -25 to 100 °C and has a high pot of 1900V. With dimensions of L65.0XB50.0XH40.3 (mm), it is ideal for PANEL MOUNT applications in systems requiring up to 11.5A current handling capacity at 400Hz frequency.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Cosel
Supply Digital Components
1+ parts
$106.00
100+ parts
$54.25
1k+ parts
$11.90
10k+ parts
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved