Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
ETHERNET TRANSCEIVER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 32; Package Code: LQFP; Package Shape: SQUARE;
Median Price
-
Lifecycle Status
Suppliers In-Stock
1
In-Stock Inventory
1k+
Chip Stock
1+ parts
100+ parts
1k+ parts
10k+ parts
Authorized Procurement Solutions
Futuretech Components
Network Interfaces WJLXT905LC.C2-863532 attributes and parameters. Explore more Network Interfaces devices from Cortina Systems
Data Rate:
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Terminals:
No. of Transceivers:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Power Supplies (V):
Qualification:
Maximum Seated Height:
Sub-Category:
Maximum Supply Current:
Nominal Supply Voltage:
Surface Mount:
Technology:
Telecom IC Type:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Width:
WJLXT905LC.C2-863532 Telecommunications trade compliance attributes, and parameters.
HTS
8542.39.00.01
SB
8542.39.00.00
Cortina Systems, Inc. is a supplier of integrated circuits (ICs) for broadband communications founded in 2001. It is based in California. Cortina System was bought by Inphi Corporation in 2014. Inphi Corporation is an American company that produces 10G-800G high-speed analog and mixed-signal semiconductor components and optical subsystems to networking original equipment manufacturers (OEMs), optical module, cloud and telecom service providers. Its headquarters are located in Santa Clara, California. Inphi develops linear transimpedance amplifiers, modulator drivers, optical physical layer devices, coherent DSPs, and silicon photonic-based subsystems for long haul, metro, and data center applications. As of April 20, 2021, the company was acquired by Marvell Technology, Inc Marvell Technology, Inc. is an American company, headquartered in Santa Clara, California, which develops and produces semiconductors and related technology. Founded in 1995, the company had more than 7,000 employees as of 2023, with over 10,000 patents worldwide, and an annual revenue of $5.9 billion for fiscal 2023.
SMBJ18CA
Onsemi
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Calogic
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Peak Reflow Temperature (C): NOT SPECIFIED; Terminal Position: DUAL;
LL4148
Rectron
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
2N2222A
Bytesonic Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .6 A; No. of Elements: 1;
LM2931AZ-5.0RAG
LM2931AZ-5.0RAG by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V nominal output voltage, 0.1A max output current, and 0.6V max dropout voltage. Ideal for applications requiring stable voltage regulation in temperature-sensitive environments up to 150°C.
ECS-.327-12.5-17X-TR
Ecs International
ECS-0.327-12.5-17X-TR by Ecs International is a crystal oscillator with 20 ppm frequency tolerance, 144% stability, and 50000 ohm series resistance. Ideal for applications requiring precise timing in temperature ranges from -40 to 85 °C, such as telecommunications and industrial automation.
LM358M
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
1N4148W-7-F
Multicomp Pro
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148-GS08
Vishay Intertechnology
The Vishay Intertechnology LL4148-GS08 is a glass diode with fast recovery time of 0.008 us and max reverse current of 5 uA. Ideal for applications requiring rectification, it has a breakdown voltage of 100 V and can handle a peak forward current of 2 A.
LM358N
NXP Semiconductors
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
RC0603FR-071KL
Yageo
Yageo's RC0603FR-071KL is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in electronics, it operates b/w -55 to 155 °C with a temperature coefficient of 100 ppm/°C.
Jiangsu Jiejie Microelectronics
MBRA340T3G
MBRA340T3G by Onsemi is a Schottky rectifier diode with 40V reverse test voltage and 3A max output current. Ideal for power applications, it operates b/w -55 to 150°C, features matte tin terminal finish, and comes in a small outline package.
SS14
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138
Diodes Incorporated
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Minimum DS Breakdown Voltage: 50 V; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
First Components International
LM317LMX/NOPB
Texas Instruments
LM317LMX/NOPB by Texas Instruments is an adjustable positive single output standard regulator with a max input-output voltage differential of 40V. It operates in temperatures ranging from -40°C to 125°C and has a max output current of 0.1A, making it suitable for various applications requiring precise voltage regulation.
Rugao Dachang Electronic
RECTIFIER DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 40 V; Maximum Forward Voltage (VF): .55 V; No. of Elements: 1; Technology: SCHOTTKY;
Zowie Technology
RECTIFIER DIODE; Surface Mount: YES; No. of Phases: 1; Maximum Operating Temperature: 125 Cel; No. of Elements: 1; Maximum Non Repetitive Peak Forward Current: 30 A;
KSZ9031RNXIC-TR
Microchip Technology
Microchip's KSZ9031RNXIC-TR is a 48-terminal Ethernet transceiver with a data rate of 1000 Mbps. Operating temperature ranges from -40 to 85°C, making it suitable for industrial applications. This surface-mount chip carrier has a very thin profile and matte tin finish, ideal for networking interfaces.
KSZ8462HLI
Micrel
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 64; Package Code: LFQFP; Package Shape: SQUARE;
DP83865DVH
DP83865DVH by Texas Instruments is an Ethernet transceiver IC with a data rate of 1000 Mbps. It operates at a supply voltage of 1.8V and has a terminal pitch of 0.5mm. This network interface chip is designed for commercial temperature grade applications.
KSZ8001LI
Microchip Technology's KSZ8001LI is an Ethernet transceiver with 100 Mbps data rate. It operates in industrial temperature range (-40 to 85°C) and has a supply voltage of 1.8V. The package style is flatpack, low profile, fine pitch making it suitable for network interfaces in various applications.
KSZ8895MQXIA
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 128; Package Code: FQFP; Package Shape: RECTANGULAR;
KSZ8091RNACA-TR
KSZ8091RNACA-TR by Microchip is a 24-terminal Ethernet transceiver with 100 Mbps data rate, operating at 3.3V. It has a square chip carrier package style, matte tin terminal finish, and operates b/w 0 to 70°C. Ideal for network interfaces in commercial-grade applications requiring surface mount components with a very thin profile.
LAN8710AI-EZC-TR
LAN8710AI-EZC-TR by Microchip Tech is a Network Interface with 32 terminals in a square chip carrier package. It operates b/w -40 to 85°C, suitable for industrial use. This Ethernet transceiver has a low supply voltage of 1.2V and compact dimensions of 5x5mm for space-constrained applications.
TJA1057GTJ
NXP Semiconductors' TJA1057GTJ is a network interface IC with 5V supply voltage, 8 terminals, and 5 Mbps data rate. It is AEC-Q100 compliant for automotive applications, featuring gull wing terminal form and small outline package style. Suitable for telecom interfaces, it has a compact rectangular shape ideal for surface mount assembly.
RTL8211FSI-VS-CG
Realtek Semiconductor
Realtek's RTL8211FSI-VS-CG is a 48-terminal Ethernet transceiver with a data rate of 1000 Mbps. It operates b/w -40°C to 85°C, making it suitable for various network interface applications. The chip carrier package style with a very thin profile and no-lead terminal form enables surface mount installation in compact spaces.
TJA1051TK/3/1J
NXP's TJA1051TK/3/1J is an AEC-Q100 compliant CAN transceiver with 5 Mbps data rate, operating at 5V. It features a small outline package with 8 terminals and peak reflow temp of 260°C. Ideal for automotive applications requiring high-speed network interfaces in compact spaces.
MCP2562FD-H/MF
MCP2562FD-H/MF by Microchip is a CAN FD transceiver with 8 Mbps data rate, suitable for automotive applications. It operates at -40 to 150°C, has 8 terminals, and requires 5V supply voltage. The small outline package measures 3x3mm with a terminal pitch of 0.65mm.
TJA1051T/3/CM
NXP Semiconductors' TJA1051T/3/CM is a CAN transceiver with 5V supply voltage, supporting data rates up to 1 Mbps. It has a max supply current of 70mA and comes in a small outline package with Gull Wing terminals. Ideal for network interfaces, it offers reliable communication in automotive and industrial applications.
MCP2562FDT-H/MF
MCP2562FDT-H/MF by Microchip is a CAN FD transceiver with 8 Mbps data rate, operating at -40 to 150 °C. It has 8 terminals, matte tin finish, and small outline package style. Ideal for automotive applications due to TS 16949 screening level and low supply current of 70 mA.
ISO1042DWV
ISO1042DWV by Texas Instruments is a network interface IC with 8 terminals, operating b/w -40 to 125°C. It features a small outline package style, Gull Wing terminal form, and nickel palladium gold finish. Ideal for automotive applications requiring a 5V supply voltage and peak reflow temperature of 260°C.
LAN8710A-EZC
Standard Microsystems
ETHERNET TRANSCEIVER; Temperature Grade: OTHER; Terminal Form: NO LEAD; No. of Terminals: 32; Package Code: HVQCCN; Package Shape: SQUARE;
SN65HVD234DRG4
SN65HVD234DRG4 by Texas Instruments is a network interface IC with 1 transceiver. It operates at a data rate of 1 Mbps and has a max supply current of 6 mA. This IC is commonly used in automotive applications due to its temperature grade and small package size.
SJA1105PELY
SJA1105PELY by NXP Semiconductors is a network interface with 159 terminals, supporting a data rate of 1000 Mbps. It operates b/w -40 to 125°C and has a max supply current of 200 mA. Ideal for telecom applications, this IC features a low profile grid array package style.
TCAN332D
TCAN332D by Texas Instruments is an automotive-grade network interface IC with 1Mbps data rate. It operates b/w -40 to 125°C, suitable for harsh environments. With a small outline package and gull wing terminals, it's ideal for telecom interface circuits.
KSZ8851-16MLLI
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 48; Package Code: LFQFP; Package Shape: SQUARE;
88E1518-A0-NNB2C000
Marvell Technology
Marvell's 88E1518-A0-NNB2C000 is a square-shaped Ethernet transceiver with 48 terminals, designed for surface mount applications. It operates at a nominal voltage of 3.3V and features tin terminal finish. Ideal for network interfaces requiring high-speed data transmission in various electronic devices.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Cortina Systems
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved