Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 500 V; Rated Current: .2 A; Terminal Shape: END CAP; Packing Method: BOX;
Median Price
$86.316
Lifecycle Status
Suppliers In-Stock
10
In-Stock Inventory
< 1k
Master Electronics
1+ parts
$80.110
100+ parts
$72.470
1k+ parts
-
10k+ parts
Verical
$92.522
TEDSS.com
$27.940
Kempston Controls
$47.280
Nova Conductors
$70.300
IBS Electronics
$107.222
$95.910
Electro Sonic
$121.960
$88.350
Electronic Supply
Q Components
Vyrian
AZTECH Wire
$5.771
Continental Prestige Electronics
$68.894
Netroflash
Component Stockers USA
$115.540
Argo Parts USA
Authorized Procurement Solutions
Perfect Parts
Fuses FNQ-2/10 attributes and parameters. Explore more Fuses devices from Cooper Electronic Technologies
Circuit Protection Type:
Rated Current:
Rated Breaking Capacity:
Rated AC Voltage:
Body Diameter:
Body Height:
Dimensions:
Blow Characteristic:
Reference Standard:
Manufacturer Series:
Terminal Shape:
Terminal Finish:
Mounting Feature:
Packing Method:
FNQ-2/10 Circuit Protection trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
PCN Packaging - Shipping Box and Labels 05/Jan/2018
SMBJ18CA
Semitron
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SS14
Microsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Mde Semiconductor
ULN-2803A
Sprague Electric
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: OTHER; Terminal Form: THROUGH-HOLE; No. of Terminals: 18; Package Code: DIP; Package Shape: RECTANGULAR;
RC0805FR-0710RL
Yageo
Yageo's RC0805FR-0710RL is a 10 ohm SMT fixed resistor with 1% tolerance and 0.125 W power dissipation. With a temperature range of -55 to 155 °C, it suits applications requiring precise resistance values in compact surface mount designs.
1N4148
Pro-an Electronic
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM107H
Advanced Micro Devices
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Maximum Bias Current (IIB) @25C: .075 uA;
2N7002
Vishay Intertechnology
2N7002 by Vishay Intertechnology is a N-CHANNEL FET with 60V DS Breakdown Voltage, 0.115A Drain Current, and 7.5 ohm On Resistance. Ideal for SWITCHING applications due to its SINGLE configuration with BUILT-IN DIODE. Operates in ENHANCEMENT MODE, suitable for surface mount with GULL WING terminals.
2N2222A
Zetex Plc
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Forward International Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Nominal Breakdown Voltage: 21.05 V; Maximum Clamping Voltage: 29.2 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;
Yangzhou Yangjie Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; No. of Elements: 1; Terminal Form: GULL WING; Maximum Drain Current (ID): .34 A;
LL4148
Good-ark Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
LM7805CT/NOPB
National Semiconductor
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Voltage Tolerance: 5 %; Operating Temperature (TJ-Max): 125 Cel; Maximum Output Voltage-1: 5.25 V;
LFXTAL025159REEL
Iqd Frequency Products
LFXTAL025159REEL by IQD Frequency Products is a 32.768 kHz crystal oscillator with 20 ppm frequency tolerance and 40,000 ohm series resistance. It is ideal for applications requiring precise timekeeping, such as real-time clocks in IoT devices or microcontrollers in wearables. The surface-mount design with a drive level of 1 uW makes it suitable for compact electronic systems.
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Surface Mount: YES; No. of Phases: 1; Maximum Non Repetitive Peak Forward Current: 40 A; Technology: SCHOTTKY; No. of Elements: 1;
FDC5614P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.6 W; Transistor Application: SWITCHING; Maximum Drain Current (ID): 3 A;
Bkc Semiconductors
1N4148WS
Cheng-yi Electronic
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Comchip Technology
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Operating Temperature: 150 Cel; Operating Mode: ENHANCEMENT MODE;
CRCW040210K0FKED
Vishay Intertechnology's CRCW040210K0FKED is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.063 W power dissipation. Ideal for surface mount applications in electronics due to its compact SMT package style and high operating temperature range of -55 to 155 °C.
ATQR15
Mersen S A
The Mersen S A ATQR15 fuse is a 15A electric fuse with a rated AC voltage of 600V and rated breaking capacity of 200kA. Featuring time delay blow characteristic, it has dimensions of 10.4mm x 38.1mm and terminal shape END CAP. Ideal for circuit protection in applications requiring inline/holder mounting at temperatures up to 80°C.
0466.250NRHF
Littelfuse
Littelfuse 0466.250NRHF is a fast-acting supplemental fuse with 0.25A rated current and 125V AC/DC voltage. It has a trip time of 0.2s, dimensions of 3.18mm x 1.52mm x 0.58mm, and is suitable for electric circuit protection applications requiring a compact surface mount design.
0452002.MRL
Littelfuse 0452002.MRL NANO fuse with 125V AC/DC, 2A rated current and slow blow characteristic. Ideal for circuit protection in electronics, featuring WRAPAROUND terminals and CSA/CUL/UL standards compliance. Dimensions: 6.1mm x 2.69mm x 2.69mm, operating temp -55 to 125 °C.
0297002.WXNV
Littelfuse 0297002.WXNV is a MINI fuse with 2A rated current, 32V DC voltage, and 9J nominal joule integral. It has a 0.03s trip time and is ideal for circuit protection in automotive applications due to its compact size and high breaking capacity.
BK/ATC-10
Eaton Corporation
BK/ATC-10 by Eaton Corp is a 10A fast blow electric fuse with 32V AC/DC rating. Measuring 19.3mm x 5.25mm x 12.5mm, it has a trip time of 0.1s and operates b/w -40°C to 100°C. Ideal for circuit protection in UL standard applications with a rated breaking capacity of 1000A.
AJT600EI
Mersen S A's AJT600EI fuse, rated at 600V AC/500V DC and 600A, features a time delay blow characteristic. With a breaking capacity of 200kA, it is ideal for electric circuit protection in various applications. The fuse has TAB/BLADE terminals, measures 91.8mm in height, and includes an inline/holder mounting feature with an indicator as per UL standards.
3403.0169.24
Schurter Ag
3403.0169.24 fuse by Schurter Ag is a 2A, 250V electric fuse with a time lag blow characteristic and rated breaking capacity of 200A. Measuring at 10.1mm x 3mm x 3mm, it is ideal for circuit protection in applications requiring a max operating temperature of 125°C and min pre-arcing time of 10ms.
04000026NR
Littelfuse 04000026NR fuse, with a rated current of 1.5A and fast blow characteristic, is ideal for electric circuit protection. It has a nominal joule integral of 0.03J and trip time of 5s, suitable for surface mount applications in electronics with a max operating temperature of 150°C.
3413.0115.22
Schurter Ag's 3413.0115.22 fuse, rated at 1A and 32V, features a very fast blow characteristic with dimensions of 3.2mm x 1.6mm x 0.6mm. Ideal for circuit protection in electronics, it has a pre-arcing rating of 0.07 A2/s and is UL/CUL certified for use in various applications requiring surface mount fuses.
FRS-R-100
Eaton Corporation's FRS-R-100 fuse, rated at 100A and 600V AC/DC, features a time delay blow characteristic. With a compact body size of 34mm x 200mm, it is suitable for inline mounting applications requiring electric circuit protection. Compliant with CE, CSA, and UL standards, this RK5 class fuse has a high breaking capacity of 200kA.
FNQ-R-1-1/8
Eaton Corporation's FNQ-R-1-1/8 fuse, rated at 1.125A and 600V, features a time delay blow characteristic. With a body length of 10.3mm and diameter of 38.1mm, it is ideal for circuit protection in applications requiring inline mounting or holder installation. Compliant with CE, CSA, and UL standards, this CC-class fuse has a high breaking capacity of 200000A.
KTK-1/2
Eaton Corporation's KTK-1/2 fuse, rated at 500V AC/0.5A, features fast blow characteristic and nickel terminal finish. With a compact size of 10.3mm x 38.1mm, it is ideal for inline mounting applications requiring electric circuit protection up to 100000A breaking capacity. Compliant with CE, CSA, and UL standards, it comes in a box packing method for easy installation.
025101.5MXL
Littelfuse 025101.5MXL is a PICO fuse with 1.5A rated current and 125V DC/AC voltage, offering very fast blow characteristic in electric circuit protection applications. With dimensions of 2.8mm x 7.11mm, it has a trip time of 1s and nominal joule integral of 0.587J for supplemental use at temperatures ranging from -55°C to 125°C.
KTK-12
Cooper Industries
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 500 V; Rated DC Voltage: 600 V; Rated Current: 12 A; Terminal Shape: END CAP;
0ATO030.V
Littelfuse 0ATO030.V fuse offers 1500J nominal joule integral, 0.1s trip time, and 30A rated current. Ideal for circuit protection in applications requiring a rated DC voltage of 32V, such as automotive electronics and industrial equipment. Meets CSA and UL standards for reliable performance.
ATM20
The Mersen S A ATM20 fuse is a 20A fast blow electric fuse with 600V AC/DC rated voltage and 100kA breaking capacity. It comes in midget size, measures 10mm x 38mm, and has end cap terminals. Ideal for inline mounting applications requiring reliable circuit protection.
AGC-20-R
Eaton Corporation's AGC-20-R fuse, rated at 20A and 32V, offers fast blow characteristic with a pre-arcing rating of 1.438 A2/s. With dimensions of 6.3x32mm, it is used for electric circuit protection in applications requiring a max operating temperature of 125°C.
0466.125NRHF
Littelfuse 0466.125NRHF is a 1206 size fast-acting supplemental fuse with 0.125A rated current and 125V AC/DC voltage. It has a trip time of 0.2s, pre-arcing rating of 0.0004 A2/s, and operates b/w -55°C to 90°C. Ideal for circuit protection in electronics, it meets CE, CSA, TUV, and UL standards for surface mount applications.
LP-CC-2-1/4
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 300 V; Rated Current: 1.25 A; Terminal Shape: END CAP;
FNQ-15
Cooper Electronic Technologies
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 500 V; Rated Current: 15 A; Terminal Shape: END CAP; Terminal Finish: NICKEL;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
FNQ-2-1/4
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 500 V; Rated Current: 2.25 A; Terminal Shape: END CAP; Dimensions: 10.3mm x 38.1mm;
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 500 V; Rated Current: 2.25 A; Terminal Shape: END CAP; Body Height: 38.1 mm;
Eaton Corporation's FNQ-2-1/4 fuse, rated at 2.25A and 500V, features a time delay blow characteristic. With a compact MIDGET size and CE, CSA, UL certifications, it is ideal for inline circuit protection in various applications requiring a high breaking capacity of 10000A.
FNQ-2-1/2
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 500 V; Rated Current: 2.5 A; Terminal Shape: END CAP; Body Length/Diameter: 10.3 mm;
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 500 V; Rated DC Voltage: 500 V; Rated Current: 2.5 A; Terminal Shape: END CAP;
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 500 V; Rated Current: 2.5 A; Terminal Shape: END CAP; Blow Characteristic: TIME DELAY;
FNQ-2/10
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 500 V; Rated DC Voltage: 500 V; Rated Current: .2 A; Terminal Shape: END CAP;
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 500 V; Rated Current: .2 A; Terminal Shape: END CAP; Body Length/Diameter: 10.3 mm;
FNQ-20
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 500 V; Rated Current: 20 A; Terminal Shape: END CAP; Rated Breaking Capacity: 10000 A;
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 500 V; Rated Current: 20 A; Terminal Shape: END CAP; Packing Method: BOX;
FNQ-25
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 500 V; Rated Current: 25 A; Terminal Shape: END CAP; Packing Method: BOX;
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 500 V; Rated Current: 25 A; Terminal Shape: END CAP; Blow Characteristic: TIME DELAY;
ELECTRIC FUSE; Rated Current: 25 A; Terminal Shape: END CAP; Body Height: 38.1 mm; Rated Breaking Capacity: 10000 A; Body Length/Diameter: 10.41 mm;
FNQ-2
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 500 V; Rated Current: 2 A; Terminal Shape: END CAP; Blow Characteristic: TIME DELAY;
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 500 V; Rated Current: 2 A; Terminal Shape: END CAP; Body Height: 38.1 mm;
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 500 V; Rated DC Voltage: 500 V; Rated Current: 2 A; Terminal Shape: END CAP;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved