Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SINGLE PHASE EMI FILTER; Rated Current: 1.6 A; Height: 6 mm; Manufacturer Series: CMS; Maximum Operating Temperature: 160 Cel; Additional Features: INDUCTANCE 270 MICRO HENRY;
Median Price
$2.444
Lifecycle Status
Suppliers In-Stock
1
In-Stock Inventory
< 1k
Voyager Components
1+ parts
100+ parts
1k+ parts
10k+ parts
EMI Mains Filters CMS2-7 attributes and parameters. Explore more EMI Mains Filters devices from Cooper Electronic Technologies
Additional Features:
Approvals (V):
Filter Type:
Height:
Length:
Manufacturer Series:
Mounting Type:
Maximum Operating Temperature:
Minimum Operating Temperature:
Packing Method:
Dimensions:
Rated Current:
Width (mm):
2N7002
Infineon Technologies
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Transistor Element Material: SILICON; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
LL4148
Micronas Semiconductor Holding Ag
RECTIFIER DIODE; Surface Mount: YES; No. of Phases: 1; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Output Current: .2 A; Maximum Forward Voltage (VF): 1.2 V;
Weitronic Enterprise
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
2N2222A
Bharat Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Zetex Plc
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Peak Reflow Temperature (C): 260; Package Shape: RECTANGULAR;
CRCW04020000Z0ED
Vishay Intertechnology
Vishay Intertechnology's CRCW04020000Z0ED is a 0 ohm jumper resistor with METAL GLAZE/THICK FILM tech. Operating b/w -55 to 155 °C, it suits SMT applications in automotive electronics due to AEC-Q200 compliance and 0.063 W power dissipation.
DP83848IVVX/NOPB
Texas Instruments
Texas Instruments DP83848IVVX/NOPB is a 3.3V Ethernet transceiver with 100000 Mbps data rate, suitable for industrial applications. It features CMOS technology, operates b/w -40 to 85 °C, and comes in a low profile flatpack package with matte tin finish.
M39029/56-351
Itt Cannon
CONNECTOR ACCESSORY; MIL Conformity: YES; Terminal Type: WIRE; IEC Conformity: NO; Alternate Contact Sources: ITT CANNON; Associated Military - Specifications: MIL-C-38999;
STM32H743XIH6
STMicroelectronics
STM32H743XIH6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, 36-Ch 16-Bit ADC, and 2-Ch 12-Bit DAC. It operates at up to 48 MHz, has 1085440 bytes of RAM, and offers connectivity options like CAN, I2C, USB. Ideal for industrial applications requiring high-performance processing and extensive peripheral support.
DS18B20Z
Maxim Integrated
DS18B20Z by Maxim Integrated is a 12-bit digital temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, with ±0.5°C accuracy. Suitable for applications requiring precise temperature monitoring in compact spaces.
OPA2227UA
Burr-Brown Corporation
OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
CRCW080510K0FKEA
Vishay Intertechnology's CRCW080510K0FKEA is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 reference standard compliance and -55 to 155 °C operating temperature range.
SN6505BDBVR
SN6505BDBVR by Texas Instruments is a small outline, low profile interface IC with 6 terminals. It operates b/w -55 to 125°C and supports a max output current of 1.5A at supply voltages ranging from 2.25V to 5.5V. Ideal for military-grade applications requiring compact design and high reliability.
LM317T
Inchange Semiconductor
Other Regulators; No. of Terminals: 3; Surface Mount: NO; Technology: BIPOLAR; Minimum Output Voltage-1: 1.2 V; No. of Outputs: 1;
Calogic
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Peak Reflow Temperature (C): NOT SPECIFIED; Terminal Position: DUAL;
BSS138
Weitron Technology
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Terminal Form: GULL WING; Terminal Position: DUAL;
SS14
Forward International Electronics
RECTIFIER DIODE; Surface Mount: YES; Maximum Operating Temperature: 150 Cel; No. of Elements: 1; No. of Phases: 1; Maximum Output Current: 1 A;
FDV304P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Moisture Sensitivity Level (MSL): 1; Maximum Drain Current (ID): .46 A;
MURS160T3G
Onsemi
MURS160T3G by Onsemi is a single rectifier diode with a max output current of 2A and max repetitive peak reverse voltage of 600V. It has a fast recovery time of 0.075us, making it suitable for high voltage applications. The diode operates in temperatures ranging from -65 to 175°C, ideal for power systems requiring ultra-fast response.
Baneasa S A
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .8 A; Qualification: Not Qualified;
SCF25XV-240-2R0A006JH
KEMET Corporation
SINGLE PHASE EMI FILTER;
GTX-2100-Y03
KEMET GTX-2100-Y03 EMI Mains Filter rated at 250V, 10A with approvals from TUV and UL. Features include 300 Mohm min insulation resistance, single-phase filter type, and -25 to 55 °C operating temp. Ideal for panel mounting applications requiring high pot of 500V and max leakage current of 0.75mA.
FIL-1S-1-10A-230AC-UT
Phoenix Contact
SINGLE PHASE EMI FILTER; Rated Current: 10 A; Mounting Type: PANEL MOUNT; Approvals (V): IEC; UL; VDE; Width (mm): 45; Height: 99 mm;
FN2060-16-06
Schaffner Holding Ag
The Schaffner Holding Ag FN2060-16-06 is a UL, CSA, ENEC-14 approved single-phase EMI mains filter with a rated voltage of 250V and rated current of 18.4A. It operates at temperatures from -25°C to 100°C and has dimensions of L64.8xB49.8xH40.3 (mm). Ideal for panel mounting applications requiring effective EMI filtering at 50/60Hz frequencies.
CMS3-2-R
Eaton Corporation
Eaton Corporation's CMS3-2-R is a UL-approved SINGLE PHASE EMI FILTER with 4 terminals. It operates b/w -40°C to 160°C, rated at 5.1A. Ideal for surface mount applications due to its compact size of L11.43xB11.43xH6.0mm, it features Tin/Silver/Copper terminal finish in tape and reel packaging.
FN2090B-20-08
Schaffner Holding Ag's FN2090B-20-08 is a UL, CSA, ENEC-14 approved single-phase EMI mains filter with 250V rated voltage and 22.4A rated current. Operating at -25 to 100°C, it offers high pot of 2500V and max leakage current of 0.002mA. Ideal for panel mount applications in various industries due to its compact dimensions of L94.0xB56.0xH45.4mm.
10EK3
TE Connectivity
The TE Connectivity 10EK3 is a UL, CSA, VDE approved EMI mains filter with insertion loss of 8-45 dB. Rated for 250V and 10A, it operates at frequencies from 0.15-30 MHz. Ideal for single-phase applications, this panel-mount filter has dimensions of L71.4xB52.6xH29.5 mm and withstands temperatures from -10 to 40°C.
FN406-1-02
Schaffner Holding Ag's FN406-1-02 is a UL, CSA, ENEC-14 approved single-phase EMI mains filter with 250V rated voltage and 1A rated current. With dimensions of L45.0xB15.0xH28.0 (mm), it operates at -25 to 100 °C and has a max leakage current of 0.373 mA. Ideal for applications requiring through-hole mounting and high-pot testing up to 2000V in frequency range of 50/60Hz.
SCF25XV-310-2R3A004JV
CMS1-7-R
Eaton Corporation's CMS1-7-R is a UL-approved EMI mains filter with 4 terminals. It operates b/w -40°C to 160°C, rated at 2.6A. Ideal for surface mount applications, it measures L9.4xB7.2xH2.6mm and comes in tape and reel packaging.
PLA10AN4330R3R2B
Murata Manufacturing
Murata Manufacturing's PLA10AN4330R3R2B is a SINGLE PHASE EMI FILTER with 300V rated voltage and 100 Mohm min insulation resistance. It operates b/w -25°C to 120°C, suitable for EMI mains filtering applications. Dimensions: L18.0xB16.0xH17.5 mm, mounting type: THROUGH HOLE MOUNT, and terminal finish: Tin/Copper (Sn/Cu).
SC-10-30J
Tokin
SINGLE PHASE EMI FILTER; Rated Current: 10 A; Rated Voltage: 250 V; Mounting Type: THROUGH HOLE MOUNT; Additional Features: INDUCTANCE 3 MILLI HENRY; Height: 33 mm;
3-103-708
Schurter Ag
Schurter Ag's 3-103-708 EMI Mains Filter is a single-phase filter with 250V rating, CSA/EN/IEC/UL approvals. With 10A rated current, it operates at -40 to 100°C and has max leakage current of 0.5mA. Ideal for panel mounting in applications requiring effective EMI filtering at 50/60Hz frequency.
FN2090-6-06
FN2090-6-06 by Schaffner Holding Ag is a UL, CSA, ENEC-14 approved EMI mains filter with 250V rated voltage and 6.7A rated current. It operates at temperatures from -25°C to 100°C, has a high pot of 2000V, and max leakage current of 0.67mA. This single-phase filter is panel mountable and suitable for applications requiring effective electromagnetic interference suppression.
SC-02-20G
The KEMET SC-02-20G is a UL-approved EMI mains filter with 100 Mohm min insulation resistance and 250V rated voltage. It operates b/w -25°C to 105°C, has dimensions of L17.5xB14.0xH17.5 mm, and a rated current of 2A. Ideal for single-phase EMI filtering applications requiring through-hole mounting in various electronic devices.
SCF29XV-050-1R0A044JH
RN214-2-02-4M2
The Schaffner Holding Ag RN214-2-02-4M2 EMI Mains Filter is UL, IEC, VDE, and ENEC-10 approved with a rated voltage of 300V. It operates at temperatures from -40 to 100°C and has a max current of 2A. This single-phase filter is designed for through-hole mounting applications.
FN355-10-05
Schaffner Holding Ag's FN355-10-05 EMI Mains Filter is a THREE PHASE filter with 440V rated voltage, UL, CSA, SEMKO approvals. It operates at -25 to 100 °C and has a high pot of 1900V. With dimensions of L65.0XB50.0XH40.3 (mm), it is ideal for PANEL MOUNT applications in systems requiring up to 11.5A current handling capacity at 400Hz frequency.
1-6609032-3
TE Connectivity's 1-6609032-3 EMI Mains Filter is a single-phase filter with UL, CSA, and VDE approvals. It offers insertion loss of 5 dB at 0.15 MHz and 65 dB at 10 MHz. With a rated voltage of 250V and rated current of 10A, it is ideal for panel mount applications in electronics to reduce electromagnetic interference.
FMAC-0932-2510
Schurter Ag's FMAC-0932-2510 EMI Mains Filter is UL, CUL, VDE, IEC, and ENEC-10 approved with a rated voltage of 480V. It operates at temperatures ranging from -25°C to 100°C and has a max leakage current of 156mA. With dimensions of L201.0xB121.0xH66.0mm, it is ideal for panel mounting in three-phase applications up to 25A.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Cooper Electronic Technologies
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved