Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
KSL0M411LFTR by C & K Components is a SPST keypad switch with 100000 cycle electrical life and 1VA@32VDC DC max power rating. It features SILVER end contact material, IP60 sealing, and operates b/w -40 to 85 °C. Ideal for applications requiring a long hard plastic actuator type with 0.6mm actuator travel.
Median Price
$0.884
Lifecycle Status
Suppliers In-Stock
12
In-Stock Inventory
1k+
Newark
1+ parts
$0.859
100+ parts
$0.727
1k+ parts
10k+ parts
-
Element14
$1.209
$0.811
$0.804
$0.631
DigiKey
$1.280
$0.975
$0.844
$0.762
Farnell
$1.353
$0.950
Mouser Electronics
$1.360
$0.807
$0.756
Chip1Stop
$0.472
Verical
$0.640
$0.610
$0.590
TTI
$0.572
Master Electronics
$0.910
$0.586
$0.552
Future Electronics
$0.630
IBS Electronics
$1.152
$1.088
Electro Sonic
$0.932
$0.609
$0.575
Component Stockers USA
$0.540
$0.380
Perfect Parts
Assy Fe
iodParts Technologies Inc.
Authorized Procurement Solutions
Wave soldering is a reliable and efficient method for soldering electronic components, ensuring strong and lasting connections in this keypad switch.
With a high electrical life cycle, this keypad switch is durable and long-lasting, providing consistent performance over a significant period.
This keypad switch can handle a high power rating, making it suitable for a variety of applications that require efficient power transmission.
The high insulation resistance of this keypad switch ensures safety and prevents electrical leakage, making it a reliable choice for electronic devices.
With an IP60 sealing rating, this keypad switch is protected against dust and some water ingress, making it suitable for use in various environments.
The single pole, single throw switch function of this keypad switch simplifies the circuit design and operation, making it easy to integrate into different electronic systems.
With a high maximum operating temperature, this keypad switch can withstand heat and operate reliably in various conditions.
The low minimum operating temperature of this keypad switch ensures usability in cold environments without compromising performance.
Keypad Switches KSL0M411LFTR attributes and parameters. Explore more Keypad Switches devices from C & K Components
Actuator Travel (mm):
Type (Actuator):
Body Width:
Body Length/Diameter:
Center Contact Material:
Circuit Config:
Maximum Contact Bounce Time:
Maximum DC Contact Current:
DC Maximum Power Rating R Load (Contact):
DC Maximum Rating R Load (Contact):
Contact Resistance:
Maximum DC Contact Voltage:
Dielectric Withstand Volts (V):
Electrical Life:
End Contact Material:
Insulation Resistance:
JESD-609 Code:
Mounting Feature:
No. of Switches:
Maximum Operating Force:
Maximum Operating Temperature:
Minimum Operating Temperature:
PCB Hole Count:
Packing Method:
Sealing:
Solderability:
Switch Action:
Switch Function:
Switch Type:
Terminal Finish:
Terminal Length:
Termination Type:
KSL0M411LFTR Switches trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.50.90.40
SB
PCN Part Status Change - Multiple Devices Not Available 03/Dec/2016
C&K is now a part of Littelfuse, Inc. Since its formation in 1928, C&K has been at the forefront of technological evolution in electromechanical switches. The company’s unmatched design capabilities tailored to customer needs are recognized globally by design engineers who demand high-quality switch performance. Nearly a century later, C&K remains one of the most recognizable and trusted names in the e-mech switch industry. C&K has headquarters in Waltham, Massachusetts (United States) and global design centers at its HQ location alongside Dole (France) and Huizhou (China). Used in automotive, industrial, medical and consumer products, among other applications, C&K products – including tactile, rocker and toggle switches – are assembled in over 55,000 standard products and 8.5 million switch combinations to companies that design, manufacture and distribute electronics products. So whether you’re interested in a universal paddle switch assembly for a fire alarm, a compact start/stop button for a boating application, a switching mechanism for a surgical device with a specific actuation force, or a tailor-made multi-position snap-switch module for temperature adjustment, you can count on C&K to deliver the best possible solution every time.
BAV99
Cheng-yi Electronic
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
SMBJ18CA
Pulse Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
CRG0805F10R
Tyco Electronics Components
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 125 Cel; Tolerance: 1 %;
C1206C104M5RACTU
KEMET Corporation
KEMET C1206C104M5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125°C operating range, and ±20% tolerance. Ideal for surface mount applications in electronics requiring stable capacitance across temperatures.
2N7002
Unisonic Technologies
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Package Body Material: PLASTIC/EPOXY; Package Shape: RECTANGULAR;
06035C103KAT2A
KYOCERA AVX
06035C103KAT2A by KYOCERA AVX is a SMT ceramic capacitor with 0.01uF capacitance and 50V URdc. It has X7R temperature characteristics, -55 to 125 °C operating range, and 10% tolerance. Ideal for applications requiring compact surface mount capacitors with stable performance in a wide temperature range.
M39029/56-351
Defense Logistics Agency
CONNECTOR ACCESSORY; MIL Conformity: YES; Contact Gender: FEMALE; Mating Contacts: M39029/58-363; Removal Tool Sources: MILITARY; Alternate Contact Sources: MILITARY;
LM107H
Advanced Micro Devices
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Maximum Bias Current (IIB) @25C: .075 uA;
1N4148
Frontier Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
TCA6424ARGJR
Texas Instruments
TCA6424ARGJR by Texas Instruments is a CMOS parallel I/O port with 24 bits and 3 ports. It operates b/w -40 to 85°C, suitable for industrial applications. With a max clock frequency of 0.4 MHz, it offers low power consumption at only 0.03 mA supply current.
LM555CMX
LM555CMX by Texas Instruments is an Analog Waveform Generation IC with 8 terminals. It operates at a nominal voltage of 5V and supports power supplies ranging from 5V to 15V. This versatile IC, housed in a small outline package, is commonly used for pulse and rectangular waveform generation in commercial temperature environments.
Taiwan Semiconductor
BSS138
National Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Maximum Feedback Capacitance (Crss): 10 pF; JEDEC-95 Code: TO-236AB;
Rfe International
RECTIFIER DIODE; Surface Mount: NO; No. of Elements: 1; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Forward Voltage (VF): 1 V; Config: SINGLE;
Bytesonic Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Terminal Position: DUAL; Minimum Operating Temperature: -55 Cel;
2N2222A
Itt Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
STM32H743XIH6
STMicroelectronics
STM32H743XIH6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, 36-Ch 16-Bit ADC, and 2-Ch 12-Bit DAC. It operates at up to 48 MHz, has 1085440 bytes of RAM, and offers connectivity options like CAN, I2C, USB. Ideal for industrial applications requiring high-performance processing and extensive peripheral support.
Sensitron Semiconductor
Vicor
Loras Industries
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
1.14.100.503/0000
Rafi & Kg
KEYPAD SWITCH; Mounting Feature: SURFACE MOUNT-STRAIGHT; Switch Function: SPST; Maximum Operating Temperature: 90 Cel; JESD-609 Code: e3; Body Height: 3.57 mm;
KMR241GLFS
Itt Cannon
KMR241GLFS by ITT Cannon is a 2.8" keypad switch with IP40 sealing, SPST function, and 1ms contact bounce time. Ideal for surface mount applications, it operates b/w -40°C to 85°C with a max force of 5N. Suitable for various electronic devices requiring reliable tactile input control.
EVPAA202K
Panasonic
The Panasonic EVPAA202K is a black keypad switch with SPST function, ideal for ON-OFF applications. With an electrical life of 200k cycles and insulation resistance of 100M ohm, it offers reliable performance. Featuring a push plate actuator type and snap action contact timing, this switch has a max operating force of 1.6N.
4FSH98222
Apem Components
The Apem Components 4FSH98222 keypad switch has an electrical life of 10M cycles, GREEN/RED LED illumination, and IP67 sealing. Ideal for applications requiring a SPST switch function with MOMENTARY action, such as in environments with temperatures ranging from -40°C to 160°C.
D6C90F1LFS
C & K Components
KEYPAD SWITCH; Mounting Feature: THROUGH HOLE-STRAIGHT; Switch Function: SPST; Type (Actuator): SQUARE TYPE; Solderability: HAND/WAVE; Maximum DC Contact Current: .1 A;
EVPBB0AAB000
Keypad Switches;
SKRBAGE010
Alps Electric
KEYPAD SWITCH; Mounting Feature: SURFACE MOUNT-STRAIGHT; Switch Function: SPST; Type (Actuator): SHARP STEM; Solderability: REFLOW; Maximum Operating Force: 1.1 N;
KSC241JLFS
KSC241JLFS by ITT Cannon is a SPST keypad switch with 300000 cycles electrical life and IP67 sealing. It has a max DC power rating of 1VA@32VDC, ideal for applications requiring a soft type actuator and momentary-tactile switch action in harsh environments.
PTS636SK50JSMTRLFS
PTS636SK50JSMTRLFS by C & K Components is a RED keypad switch with SPST function. It has an electrical life of 30,000 cycles and insulation resistance of 100M ohm. Ideal for applications requiring a momentary-tactile switch with surface mount-straight mounting feature.
DTS-62N-V
DTS-62N-V by Apem Components is a SPST keypad switch with 200000 cycles electrical life. Featuring a 6.35mm actuator travel, it operates b/w -25 to 70°C. Ideal for applications requiring momentary-tactile switch action and through-hole-straight mounting with a max DC contact voltage of 12V.
SKRPACE010
Alps Alpine
Alps Alpine SKRPACE010 is a SPST keypad switch with 50000 cycles electrical life. Featuring sharp stem actuator, it has 2.55N max operating force and 0.05A@16VDC DC rating. Ideal for surface mount applications in devices requiring momentary-tactile switch action.
SKY13374-397LF
KEYPAD SWITCH; Manufacturer Series: KSC4V2;
EVQPAC07K
The Panasonic EVQPAC07K is a black keypad switch with 100000 cycles electrical life and 50000000 ohm insulation resistance. It operates b/w -20 to 70 °C, has SPST switch function, and requires 1.4N max operating force. Ideal for applications requiring momentary switch action with through-hole-straight mounting feature.
3ESH9-09.5
The Apem Components 3ESH9-09.5 is a keypad switch with IP67 sealing, suitable for surface mount applications. It has an electrical life of 10M cycles, operates b/w -40°C to 160°C, and supports a max DC contact voltage of 24V. Ideal for industrial control panels and outdoor equipment due to its durability and reliability.
1825910-6
Tyco Electronics Alcoswitch
KEYPAD SWITCH; Mounting Feature: THROUGH HOLE-STRAIGHT; Switch Function: SPST; Minimum Operating Temperature: -35 Cel; Body Length/Diameter: 5.99 mm; Maximum DC Contact Voltage: 24 V;
KT11P2SM34LFS
KEYPAD SWITCH; Mounting Feature: SURFACE MOUNT-STRAIGHT; Switch Function: SPST; Type (Actuator): HARD TYPE; Solderability: MIL-STD; Electrical Life: 100000 Cycle(s);
1571220-1
KEYPAD SWITCH; Mounting Feature: THROUGH HOLE-STRAIGHT; Switch Function: SPST; Maximum Contact Bounce Time: 20 ms; Minimum Operating Temperature: -35 Cel; Electrical Life: 1000000 Cycle(s);
KSA0M411LFTR
KSA0M411LFTR by C & K Components is a SPST keypad switch with 100000 cycle electrical life and 1VA@32VDC DC max power rating. It features SILVER end contact material, IP60 sealing, and operates b/w -40 to 85 °C. Ideal for applications requiring a momentary-tactile switch function with through hole-straight mounting feature.
KSR223GLFG
KSR223GLFG by ITT Cannon is a SPST keypad switch with 200000 cycles electrical life, IP50 sealing, and 3.8" body width. Ideal for applications requiring a soft type actuator, it operates b/w -40°C to 125°C temperatures and has a max contact voltage of 32VDC.
PTS525SK10SMTRLFS
ITT Cannon's PTS525SK10SMTRLFS keypad switch offers SPST function with 100000 cycles. With a body width of 5.25in and height of 1.5mm, it operates b/w -40 to 60°C. Ideal for applications requiring momentary-tactile action, such as consumer electronics or industrial control systems.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved