Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 39.45; Lens Type: TINTED DIFFUSED; Terminal Finish: MATTE TIN;
Median Price
-
Lifecycle Status
Suppliers In-Stock
3
In-Stock Inventory
1k+
EBV Elektronik
1+ parts
100+ parts
1k+ parts
10k+ parts
Vyrian
Digiode
Native Components
$0.132
$0.127
Northwest PG Solutions
$0.145
$0.128
Decca Corp
$17.000
$16.660
$16.493
Supply Digital
Corphita
Visible LEDs HLMP-3301-HJ000 attributes and parameters. Explore more Visible LEDs devices from Broadcom
Color:
Configuration:
Maximum Forward Current:
JESD-609 Code:
Lens Type:
Nominal Luminous Intensity (mcd):
Mounting Feature:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Optoelectronic Type:
Height:
Packing Method:
Peak Wavelength (nm):
Shape:
Size:
T-code:
Terminal Finish:
Terminal Pitch:
Viewing Angle:
HLMP-3301-HJ000 Optoelectronics trade compliance attributes, and parameters.
HTS
8541.40.20.00
SB
Broadcom Inc, a Delaware corporation headquartered in San Jose, CA, is a global technology leader that designs, develops and supplies a broad range of semiconductor and infrastructure software solutions. Broadcom’s category-leading product portfolio serves critical markets including data center, networking, software, broadband, wireless, storage and industrial. Our solutions include data center networking and storage, enterprise and mainframe software focused on automation, monitoring and security, smartphone components, telecoms and factory automation.
LM317T
Analog Devices
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; No. of Functions: 1; Package Body Material: PLASTIC/EPOXY; Surface Mount: NO;
STM32H743ZIT6
STMicroelectronics
STM32H743ZIT6 by STMicroelectronics is a 32-bit microcontroller with integrated cache and a max supply voltage of 3.6V. It is commonly used in industrial applications, offering features such as 21 timers, CAN and USB connectivity, and low power mode.
2N7002
Comchip Technology
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Operating Temperature: 150 Cel; Operating Mode: ENHANCEMENT MODE;
2N2222A
International Devices
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
NE555DR
Texas Instruments
NE555DR by Texas Instruments is an Analog Waveform Generation IC with 8 terminals, operating voltage of 5V, and power supplies ranging from 5-15V. It is a versatile component for pulse generation applications due to its small outline package and commercial temperature grade suitability.
1N4148
Terry Semiconductor
RECTIFIER DIODE; Surface Mount: NO; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; JESD-609 Code: e0; Maximum Repetitive Peak Reverse Voltage: 100 V;
Gulf Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM317AEMP/NOPB
National Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: SOP; Terminal Form: GULL WING; Qualification Status: Not Qualified; Width: 3.56 mm;
BAV99WT1G
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Good-ark Electronics
RECTIFIER DIODE; Surface Mount: NO; No. of Elements: 1; Maximum Non Repetitive Peak Forward Current: .5 A; Maximum Forward Voltage (VF): 1 V; No. of Phases: 1;
Crystalonics
PAP-06V-S
J S T Mfg
PAP-06V-S by J S T Mfg is a 6-contact BOARD CONNECTOR with 94V-0 UL Flammability Code. It has FEMALE contacts, CRIMP termination, and comes WITH CABLE ASSEMBLY for CABLE mounting applications.
First Components International
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Operating Temperature: 200 Cel; Config: SINGLE; No. of Elements: 1;
BAV99
Microsemi
Cheng-yi Electronic
1N4148W-7-F
Diodes Incorporated
1N4148W-7-F by Diodes Inc. is a single rectifier diode with 0.715V max forward voltage and 100V max reverse voltage. Ideal for applications requiring fast switching speeds, it has a small outline package style and matte tin terminal finish, making it suitable for surface mount PCB designs.
RC0805FR-0710KL
Yageo
Yageo's RC0805FR-0710KL is a 10000 ohm SMT fixed resistor with 1% tolerance and 0.125 W power dissipation. Ideal for applications requiring resistance to operate b/w -55°C to 155°C, such as in automotive electronics or industrial control systems. Features metal glaze/thick film technology and matte tin finish with nickel barrier.
Renesas Electronics
M39029/56351
Souriau
CONNECTOR ACCESSORY; MIL Conformity: YES; Contact Gender: FEMALE; Insertion Tools: M81969/14-10; Tool Settings: M22520/2-10; DIN Conformity: NO;
LM2931AZ-5.0RPG
Onsemi
LM2931AZ-5.0RPG by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V nominal output voltage and 0.1A max output current. It features a low dropout voltage of 0.6V, making it suitable for applications requiring stable power supply in temperature range from -40 to 125°C. The package style is cylindrical with matte tin terminal finish, ideal for various electronic devices needing precise voltage regulation.
HLMP-4000
Hewlett Packard
DUAL COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 3; Nominal Luminous Intensity (mcd): 5/8; Lens Type: DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb);
597-6201-607F
Dialight
Dialight's 597-6201-607F is a WATER CLEAR LED with peak wavelength of 611nm, forward current of 0.03A, and viewing angle of 70°. Ideal for applications requiring Amber light emission, such as indicator lights in electronic devices due to its compact size and low operating temperature range from -55°C to 85°C.
LTL42NKFD
Lite-on Technology
Visible LEDs;
597-5311-407F
Dialight's 597-5311-407F is a single color LED with peak wavelength of 560nm and forward voltage of 2.8V. Ideal for surface mount applications, it offers a viewing angle of 150° and luminous intensity of 6.4mcd, making it suitable for various visible LED lighting projects.
LGL29K-G2J1-24-Z
Osram Opto Semiconductors
Osram Opto Semiconductors' LGL29K-G2J1-24-Z is a 1.3mm single color LED with peak wavelength of 572nm and max forward current of 0.02A. Ideal for applications requiring green light emission, such as indicator lights in electronic devices. Operating temperature range from -40 to 100°C makes it versatile for various environments.
LTST-S270KGKT
LTST-S270KGKT by Lite-on Technology is a 1.2mm GREEN single-color LED with a peak wavelength of 574nm and max forward current of 0.03A. Ideal for surface mount applications, it has a viewing angle of 130° and min luminous intensity of 130cd, making it suitable for various lighting projects.
CMD15-21VGD/TR8
Cml Technologies & Kg
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 6.5; Lens Type: DIFFUSED; Height: 1.1 mm;
550-5107F
Dialight's 550-5107F is a 5mm red LED with max. forward current of 0.025A, peak wavelength of 650nm, and viewing angle of 50°. Ideal for indicator lights in electronics due to its diffused lens, T-1 3/4 size, and radial mount feature.
HLMP-1719
Everlight Electronics
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 2.0; Lens Type: TINTED DIFFUSED; Additional Features: HIGH RELIABILITY;
LTST-C190GKTT
LTST-C190GKTT by Lite-on Technology is a single color LED with peak wavelength of 565nm and viewing angle of 130°. With a size of 1.06mm, it has a max forward current of 0.03A making it suitable for surface mount applications in electronics requiring green light emission.
XHP50B-00-0000-0D0UH20E3
Cree Led
SINGLE COLOR LED;
551-3007F
Dialight's 551-3007F is a 3mm DUAL COLOR LED with COMMON BIPOLAR TERMINAL. It has a max forward current of 0.03A, peak wavelengths of 635nm/565nm, and nominal luminous intensity of 4.7/10.0 mcd. Ideal for applications requiring red/green indicator lights with a viewing angle of 60° and radial mounting feature.
HSMF-C115
Broadcom
HSMF-C115 by Broadcom is a 3-element COMMON ANODE TRIPLE COLOR LED with peak wavelengths of 637/523/468nm. With a size of 2.1mm and max forward current of 0.02A, it offers red/green/blue colors for various applications like signage, displays, and indicator lights due to its surface mount feature and viewing angle of 120°.
550-3005F
Dialight's 550-3005F is a 5mm dual-color LED with common bipolar terminal, max. forward current of 0.04A, and peak wavelengths of 660nm/565nm. Ideal for applications requiring diffused white light output in a radial mount configuration with red/green colors at 60° viewing angle.
SML-D15MWT86
ROHM
ROHM's SML-D15MWT86 is a 1.2mm SINGLE COLOR LED with 0.035A max forward current and 71.0mcd nominal luminous intensity. Ideal for surface mount applications, it emits YELLOWISH GREEN light at -40 to 100°C, making it suitable for various visible LED lighting projects.
SML-LX1206GC-TR1
Lumex
The Lumex SML-LX1206GC-TR1 is a 2mm GREEN LED with peak wavelength of 565nm, forward current of 0.025A, and viewing angle of 160°. Ideal for surface mount applications in electronics, it operates b/w -25 to 85 °C and has a luminous intensity of 10.0mcd.
555-2403F
Dialight's 555-2403F LED is a 2mm single color with built-in resistor, emitting yellow light at peak wavelength of 583nm. With max forward current of 0.0067A and voltage of 2.4V, it's ideal for radial mounting applications requiring diffused illumination in a compact space.
HSMG-C150
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 9.5; Lens Type: DIFFUSED; Color: GREEN;
XHP35B-00-0000-0D0BD430E
597-2723-607F
Dialight's 597-2723-607F is a COMMON ANODE LED with 0.03A current, emitting YELLOW light at 591nm. Ideal for SURFACE MOUNT applications, it offers a viewing angle of 130° and luminous intensity of 30.0mcd. Operating b/w -55°C to 85°C, it suits various lighting needs.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
HLMP-3507
HLMP-3507 by Broadcom is a 5mm single color LED with peak wavelength of 565nm. It has a max forward current of 0.03A and viewing angle of 60°. Ideal for applications requiring high performance green light emission in bulk packaging, with radial mounting feature.
Agilent Technologies
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 5.2; Lens Type: TINTED DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb);
SINGLE COLOR LED; Lens Type: DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb); Color At Wavelength: Green; Height: 8.8 mm; No. of Functions: 1;
HLMP3507
Three-five Systems
HLMP3507 by Three-five Systems is a green LED with peak wavelength of 565nm and max forward current of 0.03A. With diffused lens, it has a viewing angle of 75° and operates b/w -55 to 100°C. Ideal for applications requiring low power consumption and precise color emission in various environments.
HLMP-1790-A00A2
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 2.3; Lens Type: TINTED DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb);
Broadcom's HLMP-1790-A00A2 is a 3mm single color LED with peak wavelength of 565nm. With max forward current of 0.007A, it emits green light at 2.3mcd luminous intensity. Ideal for applications requiring a radial mount visible LED with a viewing angle of 50°.
HLMP-1790
SINGLE COLOR LED; Lens Type: DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb); T-code: T-1; Maximum Forward Voltage: 2.2 V; Viewing Angle: 50 deg;
HLMP1790
HLMP1790 by Cml Technologies & Kg is a 3mm SINGLE COLOR LED with peak wavelength of 565nm. With max forward current of 0.0075A, it's ideal for applications requiring high efficiency green light emission in a compact form factor.
Fairchild Semiconductor's HLMP-1790 is a 3mm single color LED with peak wavelength of 585nm. It has a max forward current of 0.0075A and forward voltage of 2.2V, suitable for applications requiring diffused green light emission in a radial mount configuration.
Qt Optoelectronics
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 2; Lens Type: GREEN DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb);
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 2.0; Lens Type: TINTED DIFFUSED; Color: GREEN;
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 2.3; Lens Type: TINTED DIFFUSED; Terminal Finish: MATTE TIN;
Quality Technologies
SINGLE COLOR LED; No. of Functions: 1; Maximum Forward Current: .0075 A; Color: HIGH EFFICIENCY GREEN; Configuration: SINGLE; Minimum Operating Temperature: -55 Cel;
Vch
Visible LEDs; Lens Type: DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb); Color At Wavelength: Green; Viewing Angle: 50 deg; Minimum Operating Temperature: -55 Cel;
Visible LEDs; Lens Type: DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb); Minimum Operating Temperature: -55 Cel; Maximum Forward Voltage: 2.2 V; JESD-609 Code: e0;
HLMP1301
Aborn Electronics
Visible LEDs; Lens Type: DIFFUSED; Maximum Forward Voltage: 3 V; Peak Wavelength (nm): 635; Maximum Forward Current: .02 A; Minimum Operating Temperature: -55 Cel;
HLMP-1301
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 2.5; Lens Type: TINTED DIFFUSED; Viewing Angle: 90 deg;
HLMP1301 by National Semiconductor is a red visible LED with peak wavelength of 635nm and max forward current of 0.02A. With diffused lens type, it has min luminous intensity of 60cd and operates b/w -55 to 100°C. Ideal for applications requiring precise red light emission in a compact form factor.
SINGLE COLOR LED; Minimum Operating Temperature: -55 Cel; Color: HIGH EFFICIENCY RED; Shape: ROUND; Size: 3 mm; Configuration: SINGLE;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved